PO No range when we ink two SRM system with One ECC system

Hello Experts,
We have a client requirement to link Two SRM Systems with One ECC system.
In this case what number range we need to maintain in both SRM systems for PO.
-The number range of ECC PO should get update whenver the PO is transferred from any of the two SRM system.
-We have Extended classic scenario.
-Also PO Doc type is going to be same.
Can we handle this by increasing the buffer of the number range in one of the SRM system?
Any idea...pls help urgently.
Best Regards,
Anil
Edited by: anil.s.verma on Oct 1, 2010 4:33 PM

Hello Anil,
Being in Extended Classic Scenario (leading PO being in SRM, R/3 PO number range is concidered as external because PO number is given by SRM), the only solution for you is to:
1- give same number range interval for PO (internal in SRM system 1 and SRM system 2, external number range in R/3), e.g. 3100000000 - 3199999999
2- in SRM system 2, fill in current number with (for example) 3159999999 and let empty (or current value) in SRM system 1
3- assign, in each system for your concerned transaction type, number range as internal in SRM and external in R/3.
In this way, you will avoid overlaping in R/3 between PO numbers coming from SRM system 1 and SRM system 2
Regards.
Laurent.

Similar Messages

  • How to connect two BW systems to one ECC system?!?

    Hi Experts!
    We want to connect our ECC system (P11) to multiple SAP BW systems. Therefore we made a system copy of our productive BW System (P81) and create a new second BW System (T81). When I want to restore to connection to the P11 in the T81, Iu2019ll get the following error message:
    u201CDie Verbindung CA wird im Quellsystem P11_001 als Verbindung zum BW T81CLNT001 genutzt.
    Soll diese Verbindung im Quellsystem gelöscht werden? Nach erfolgreicher Löschung wird der Anschluss wiederholt.u201C
    In English this message means something like that: u201EThe connection CA is used as a connection to the BW T81CLNT001 in the source system. Should this connection be deleted in the source system? This connection can be repeated after successful deletion.u201D
    Now I ask myself: How can I connect our new BW System to our ECC System, without destroying the old connection to our productive BW system?!?
    Have anyone of you an idea how we can handle this issue?
    Thanks in advance!
    Regards, Alex

    Hi
    This happens because of RFC settings duplication as your new BW system is copied from Old one.
    First you restore the Production system connection by deleting the existing RFC.  But this will delete the new connection you have created ( that is what your dialog message is saying) 
    Basically , before creating new connection you need to delete some table entries manually , then you can connect both the system to your same source system
    Please find the link below where I mentioned the table names from where you need to delete duplicate entries manually.
    How to delete old source system assignment and assign new source system.
    Regards
    Anindya
    Edited by: Anindya Bose on Oct 13, 2011 9:01 PM

  • Two SNC system and one execution system

    Hi Experts
    Can there be possibilty of Two snc system to co exist with one execution system ECC?
    IF yes can you folks please throw some light on the same?
    This situation is arising because:
    the Lime table in the existing system has really grown huge and the archiving is not helping becuase there are new records that are added to the system every day which are more than the archiving records
    because of this huge data the upgrade is not possible and we are planning for a new setup, now to mitigate the risk we were tryin if two SNC system can coexist with one EEC system.
    Now to add to the problem is there are certain business scenarios because of which we need to put in data in lime table every day
    so reduction in data input is not possible.
    As the data in LIME is only stock of the customer coming every day and if we just transaction data , even if we go away with all the data is not an issue with us as customer reports his existing stock on daily basis to us.
    We have even thought of truncating all the tables available in in lime objects in SARA, we are thinking of this becuase system might act erratic when we setup new system and slow try moving few customer from existing to new system. as a pilot.
    Supposing if we go ahead with it ,wht could be the issues ?
    Thanks for all your help and suggestions
    Regards
    Manas Malhotra

    Hi Manas
    Two SNC systems can coexist together.
    You need to define seperate Business System Groups,RFC settings,Logical System definition
    Also you need to have seperate Identification for your master data, create your own definition in BADI
    Example:If you are sending same material XXX to two SCM systems how to diferrentiate ???
    Because BADi methods EXIT_/SAPAPO/SAPLCIF_LOC_001 & EXIT_/SAPAPO/SAPLCIF_PROD_001
    differentiate when two ERP systems are connected to one SNC system by prefix and sufix, now you need to have your own code to differentiate
    Also big time care should be taken in defining the distrubution models (bd64) and even in XI/PI like
    Example: we have two TM systems coexisting with one ERP, so we used conditoned based mapping
    Itu2019s a condition based mapping.
    1)     When TransportationRequestSUITERequest/TransportationRequest/ShipToLocation/InternalID = BP1 or BP2 or BP3 u2026 the receiver is I5YCLNT100
    2)     When TransportationRequestSUITERequest/TransportationRequest/ShipToLocation/InternalID = BP4 or BP5u2026the Receiver is I5XCLNT100.
    Also care should be taken on master data/FICO settings which both systems use in common. like using Ztypes instead of using standard one like order type, message type. It should be easy when you troubleshoot back!!!
    The inbound message parameters should be taken care w.r.t business needs
    Good to have a matrix mapping like what business process coexit in both systems and which doesnot and then try to see what settings need to be tailored???
    Best Regards
    Vinod

  • Can i use two apple tvs with one itunes account?

    can i use two apple tvs with one itunes account?

    yes and you can use more then 2
    just don't give them the same name

  • How see the company when my phone receive a call with one of my contact ?

    How see the company when my phone receive a call with one of my contact ?

    It's a good idea. Suggest it to Apple here: http://www.apple.com/feedback/iphone.html

  • I just bought a new iMac 27'' a week ago and been having problems every morning when i come to the office with turing the system on.  I have to unplug the power cord for 10 secs and replug for it to turn on.  Kindly pls advise

    I just bought a new iMac 27'' a week ago and been having problems every morning when i come to the office with turing the system on.  I have to unplug the power cord for 10 secs and replug for it to turn on.  Kindly pls advise
    Anyone having the same problem?

    Makes no difference if anyone is having the same problem.  The important thing is that it's happening to YOU!
    You have 14 days to return the computer w/no questions asked. 
    Strongly suggest that you take FULL advantage of the above before it runs out.  Let Apple deal w/the problems.

  • How data update when there is two planning cubes in one aggregation level

    If we have two planning cubes and a multi-cube includes these two planning cubes.
    then we have the aggregation level defined based on this multi-cube.
    if the characteristics and key figures defined in aggregation level all are included in these two planning cubes. When we plan the data with plan query based on this aggregation level, which plan cube will be updated with plan data, or both of them?

    HI Wang,
    yes as Bindu said you need to restrict the layout based on the infoprovider.
    Lets assume that we have a multi provider M1 and it has two planning cubes cube1 and cube1.
    in case u develop a layout for updating cube 1 give the restriction in the filter section as infoprovider = cube1.
    or the vice versa.
    Else ur layout must input values for both the cubes simultaneously, then in that case create two restricted KF with each having a restriction for cube1 and cube 2.
    so wen the user enters value for the first restricted KF it will get saved in cube1 and wen he enters value for the second  restricted KF it will gets saved in cube2.
    This is how it works. Guess this was useful to u.
    Regards.
    Shafi.

  • Connect two ECC systems with one SAP CRM 7.0

    Hi Gurus!
    I have to do a customizing for connect two ECC 6.0 and one SAP CRM 7.0, only I need the organizational structure from both systems and they need update when the structure from CRM has changes. The business partner goes to ECCs system by PI interfaces.
    Both organization models are different, so I have to maintain and update depending the changes in the business.
    But I don't know if this is possible, I don't know if we can do this by Middleware, ALE or PI.
    Can you please, give your oppinion about this topic?
    Best regards,
    Eugenia.-

    Hi Eugenia,
    Please see note 1084315 which descriibes the the multiple backend scenario.
    This should be relevant here.
    Best regards
    Christophe

  • Connect two BW systems to one source system

    Hi Experts!
    I would like to know if I can set up two BW systems connect to one source system.  We copied and built new BW system (BW2) from existing BW system (BW1).  We need to have both system connect to one source system.  When I execut Restore from BW2 - RSA1 - Source System, I'm getting a following prompt:
    "Connection cannot be used. The connection BB is used in the DEV400 source system as a connection BW1400 to BW. Do you want to delete this connection in source system".
    If I select "Delete" then it replace exising connection between BW1 - DEV and creates new connection BW2 - DEV.  If I go back to BW1 and do restore then same thing happens as BW2 connection removed.
    Is there anyway we can set up two BW systems connection to one source system with restore?  Connection works fine since each one can connection with no issues.  Just when I do restore, it removes other connection.
    Thanks.

    Check if it helps:
    Loading two different SAP BW system from one SAP R/3

  • Two portals connected to one BW system

    Hello
    Do you have any experience or just some information on the solutions when two portals are connected to one BW system? I am just wondering, is it possible?
    Thanks in advance,
    Arelis

    We have done the same thing for ESS we had to portals connected to one r/3 but beaware when we change the config for one on the backend r/3 side the settings for the other is also affected.
    there is no issue with the load in this scenario and applications work fine independently as well.
    but before doing this just ask your self it is really required cant i create 2 differnt roles and manage the display of the same using the themes?
    but still if u wan tot do the same it is possible

  • How to implement two different websites with one section that has the same content?

    I have two sister websites, each for a separate but related department in a hospital. On each of these websites, I have a main tab called library, which has about 30 pages within it for related healthcare issues. The library is the exact same content on each site, but the main navigation and header for the site is obviously different. I have been upkeeping this identical content on both sites (if something is changed, then I have to do it twice). This isn't efficient and I would like to find a way to combine them somehow. I don't have a ton of experience but I catch on pretty quickly and I basically need ideas for the best way to handle this. I have considered creating a third site, and the library tab on each of the other sites would take you to this new site. I have also wondered if there is a way to embed duplicate content into two separate pages (maybe with an iframe). That way I would update the original file and it would be updated on both sites.
    The sites also have different body sizes. One is 960 pixels wide and the other is 690 because it has a sidebar that makes it smaller. How would you all recommend I handle this? I use Dreamweaver CS6 and my pages are all HTML

    I looked into Server Side Includes and I think I would like to try it, but I can't seem to get it working. The problem is both of my sites are under a separate domain but hosted the same way I believe. For instance, I have two dreamweaver sites, but when I use my FTP, I have one large folder for the main site, then the sister site is in a folder within the main site folder. Although you can get to the main site using www.ukneurology.com, you can also get to the site using kyneurosurgery.com/neurology/index.html. I think this is what is messing me up because I can't seem to get it to work right.

  • How do i synce two different ipods with one computer??

    i recently purchased an ipod 5th generation for my other half which i have set up an account for and comes up when i plug in but the home page always comes up with my ipod stuff which is a 4th generation ipod. i have no problem with mine as it stores songs etc but when i plug the other one in it deletes whats on there and i have to manually tick all the songs again to sync back on to it. is this normal?? i am using a windows xp and have no issues with the computer and my ipod just the other one. i also have updated itunes to itunes 9 so the 5th generation ipod can download stuff. it seems to store songs and then when i go to download or update it takes them off and am back to square one!!!! please help!!

    Is the following document of any help with that?
    [How to use multiple iPods with one computer|http://support.apple.com/kb/HT1495]

  • How do I run two Apple IDs with one computer and sync music content?

    I have a single PC which I have added all of the music to one my log in. My wife and I have Iphones and I want to run separate accounts for itunes, but sync music content from the single source to both phones. Whenever I have tried to do this in the past, it starts to sync all app to both phones. I tried to therefore have separate log ins on the pc itself, but when I have tried this, the music content does not update on my wifes itunes library, after I have added music to mine (ie imported a CD), even though I have linked my wife's music library for itunes purposes to my music folder (hopefully that makes sense!!). Can anyone help as this is driving me mad, otherwise I will just have to run from my account and delete all of my wifes apps etc whenever I sync my phone, and vice versa.
    Thanks!!!
    Jeremy

    Is the following document of any help with that?
    [How to use multiple iPods with one computer|http://support.apple.com/kb/HT1495]

  • Export two TXT files with one button

    Hi,
    I'm using Application Express 2.0, i'm developing aplication in which users import few different excel spreadsheets and after that they export date in specified TXT format.
    I'w like to create functionality to export two and more files in CSV (TXT) format with one button and one click only in defined folder. It's necessary to simplify work of my endusers becose they have to generate ten or more files.
    Is it possible create functionality which generate files in defined folder without any addtional user's action?
    Best,
    Kiril

    Create a procedure to output the files, use the oracle directory object to define your output path.
    create or replace directory wayne as '/csv';
    use google or metalink to get examples. This way you can output as many files as you want, my personal opinion would be to create a dynamic report your users could run on demand.

  • Two BW Systems to One OLTP Systems.

    Hello experts:
        We are in the process of connecting two BW systems one OLTP system. Currently the BW system is connected to one OLTP system.
    I have many blogs here about this issue. But I am unable to see any answers on how to set this up.  Table RSBASIDOC table(in the OLTP system) has only one entry. How can add another entry in this table to point to two BW Systems.
    As alwasy points will be rewarded.
    Regards,
    N.S

    Why it is better to filter in the BW system rather than in R/3 ?
    I would like to avoid any changes in BW, because of:
    - reducing data traffic
    - in the source system we have more data(fields), that can be used as filter in EXIT_SAPLRSAP_001
    The data sources are unfortunately the same for the both BW systems, so I cannot differ between them.
    What do you think about these solutions:
    1. Modification in the source system - to pass logical system of BW into EXIT_SAPLRSAP_001 (the logical system is available just before EXIT_SAPLRSAP_001 is called, but unfortunately is not passed as parameter)
    2. Pass some dummy selection parameter from BW just to identify BW system ...
    May be any other solutions ?

Maybe you are looking for