PO not appearing on MD04

Hi Gurus,
I have a specific PO that it is not appearing on my MD04 list. The PO does not have MIGO and MIRO done, does anyone know what could possibly be?
kind regards
Oliver F

Isn't possible that this is a PO with account assignment? Please give information on it.
Vivek,
Subcontracting PO should appear in MD04. But e.g third-party PO not (OSS note 21350).
Regards,
Csaba
Edited by: Csaba Szommer on Feb 17, 2009 12:15 PM
Edited by: Csaba Szommer on Feb 17, 2009 12:30 PM

Similar Messages

Sales orders not appearing in MD04

Hi,
Certain sales orders are not appearing in MD04. They belong to a particular sales organization. What could be the reason and how to resolve such thing.
regards
sachin

sachin arora wrote:>
> Hi,
>
> Certain sales orders are not appearing in MD04. They belong to a particular sales organization. What could be the reason and how to resolve such thing.
>
> regards
>
> sachin
Hi Sachin,
MD04 is the stock requirement listing.
Normally it would not list general sales order that is Make to STOCK scenarion. It would not list those sales order as that requirment is taken care by PIR (planned independant Requirment).
However in scenarios like MTO (Make to Order) or Plan to assemble to name a few. MD04 will list the sales order.
For that you need to change the STRATEGY GROUP in Material Master to Planning with Asembly or Make to Order in MRP3 Tab.
Once you save the sales order for such a material it will get listed in MD04.
Hope it helps.
Thanks & Regards
Abhishek Swarup

SchAgr not appear in MD04

Hi,
I have a user, who created a Sales SchAgr but it was not appear in MD04. This is only happened to a few newly created material. What would be missing?
Thanks.

Hi Jan,
In VA31 you will create schdulling agrement,in MD04 you can see the requirement transfor means when the order material is not available system will transfor the requirement to MD04.
In your case may be the material is avilable so for that reason it will not comming in to MD04.

Deliveries not appearing in Md04

Hi,
a few deliveries are not appearing in Md04. The checking group is "KP". For this checking group in the config, the total sales req and total delivery requirements column is blank. Also the "no check" indicator is flagged.
Is it because of above config settings that deliveries are not appearing in Md04.
I think the above config settings are for availiblity check and so the requriements will pass on and the deliveries shud appear in Md04 ?
regds

Availability Check KP will not pass on the requirement to MD04. You can either maintain 01 or 02 in material master.
thanks
G. Lakshmipathi

Delivery number not appearing in MD04

Hi Experts,
Delivery number not appearing in MD04.
Regards

Thanks Jp..
Order Created with 3 materials with 0ne qty each, delivery crated 3 materials but for two materilas delivery qty and picking qty is one for third material (material X) delivery qty is ZERO, overal PGI status Completed.
One material (material X) sales order qty is One.
Delievry qty is ZERO.
this sales order not appearing in MD04,
I have created another sales order with same material delievry not created this sales order number showing in MD04.
why its nt showing previous sales order.
i need solution urgently..
regards
Edited by: michelchn on Aug 6, 2010 11:46 AM

Sales order does not appear in MD04

Hello,
One of my sales order is not appearing in MD04. I found out that in the sales order, the requirment type is missing.Is this could be te resaon for sales order not to appear in MD04.
2nd question) why requiremment type is not there in sales order. In my case, there is no entry in the item cat and mrp type table but in the strategy group in material master, the requirment type exists. so why the system is not showing requirment type in sales order by picking it up from the strategy group. in the item cat +mrp type table, the source is kept as "0", which means the system should pick the requirment type from strategy group . so why it is not picking if it is defined in straetegy group ?/
Question 3) or is it that the sales orders appear in MD04 only after MRP run but then why other sales orders are apearing before MRP run.
regards
sachin

Hi sachin,
what planning strategy group is your are using.
I assume plan stg grop is 20.
Normal settings for 20 Paln stg grop in material master.
1.Item category group (such as NORM) on the Sales Organization screen
2. Set Plan stg = 20 at Mrp View.
Requierment type fo customer requirement = KE assigned for planning strategy 20 at customizing.
For 20 plg stg requiremnt type is customer requirement type only.
with above settingsif create sale order it will appear at Md04 before MRP run.
u can see the customer requ type at "procurement tab "of sale order.
For planning of material u have to maintain valid MRP type at Mrop view.
i am not clear about ur second question.
please comeback
Regards
Pradeep

Sales order not appearing in MD04

Hi,
Sales order is not appearing in MD04 screen some times. I tried with different MRP types and Different strategies, But I could not found the solution.
Thanks in advance

Hi Bhagavan
1) Please check the Item Ctaegory of the sales order that you created
Is it TAN (or) TAS , Please check & revert
2)Also, check the material & plant which the sales Order is created, any MRP AREAS that you have in your Plant ?
3)In MD04, Check the following
Material :
MRP AREA :
Plant :
Check that you sleeted all the above points Correctly ?
Revert for any other info.
Regards
BRSR

Material is not appearing in MD04

Hi ,
I have created one sales order for one matearial. For which materail is not confirmed in Schedule line.
But when I check in MD04, This material is not appearing.
What could be the reason ?
Regards
PK

Hi
Check these notes:
SAP Note 321803 - Explanatory notes on the ATP Customizing
SAP Note 457787 - Collective SAP note: Advice notes ATP check
SAP Note 547118 - FAQ: Result of ATP calculation
SAP Note 835219 - FAQ: ATP composite note
SAP Note 89362 - No confirmation despite available quantity/stock
I hope this helps you
Regards
Eduardo

Sales Order Items does not appear in MD04 after BAPI_SALESORDER_CHANGE

Hi Gurus,
I have this scenario.
1)Create sales order with 3 items.
2)Check in MD04. All items are there.
3)Assign reason for rejection for all the items.
4)Use BAPI_SALESORDER_CHANGE to remove the reason for rejection.
5)Only the first item can be shown in MD04.
Do you have any idea how can #5 happen?
Thanks and Best regards,
Andre

Thanks for the replies.
@ A.L.V Ramana,
Yes they all have confirmed qty. The one thing I noticed is that only the first item is being saved to table VBBE from which MD04 is getting sa sales documents. Is there any condition that must be met in order for this table to be filled except that if the item has reason for rejection or does not have confirmed qty?
@ Anirudh.vb
Thanks for the suggestion but the users wants a real time update on MD04.
Best regards,
Andre

Reservation not appearing in MD04

Hi Expert,
I had created a reservation and it cant show out in the MD04 screen, may I know what could be the possible problem for that?
Thanks.

HI,
Reservations are stocks that are reserved for a usage example production Issue when you release the production order reservationa are created for components, manual reservations also can be created if you want to allocate some stock for a particular use. Tcode for reservations
Create Reservation MB21
Change Reservation MB22
Display Reservation MB23
List of Reservations MB25
If reservations are more than the UR stock still movements can be posted and in MD04 u can see the actual situation. if you run te MRP for that material if the reservationa are more than the URUS then mrp will create the PR.
In MMBE choose the stock and click --Environment -->reservations you can see all the reservation details ie for which production order this materials reservations are created.
Hope clears to you.
Regards,
R.Brahmankar

MD04 : Deliveries not appearing

Hi All,
The delivery numbers are not appearing in MD04 for very old date due to availability check which we assign in material master.
That is Daily requireemnt, do we have any possibilities to find out those delivery numbers?
Regards
Lakshmikanth

Availability Check KP will not pass on the requirement to MD04. You can either maintain 01 or 02 in material master.
thanks
G. Lakshmipathi

How to block deliveries appearing in MD04?

Hello All,
How to block deliveris appearing in MD04?
We want to block deliveries of certain Sales order (ZXY) /Storage location combination (ABCD)
i.e. deliveries of Order type ZXY, storage location ABCD should not appear in MD04.
thanks

Hi,
You can try this way. In the material master enter checking groups differently for each storage location(MRP3 view) and in Availability check control(OVZ9Transaction code) do not include the deliveries .This way you can avoid deliveries to be included in the check or use the user exit. And If you want to switch of the deliveries assigned to particular order type, just assign a different delivery type to those order type and determine different delivery item category(0184 Transaction) and in the delivery otem category configuration(0vlp--zerovlp is the transaction), there is a check box aVCHECK OFF ,JUST TICK THAT FILED. Kindly please let me know If you need any more Information on this.
Regards,
Ram Pedarla
Edited by: RamPedarla on Mar 10, 2010 11:53 AM

Sales orders not appearing MD04

Hi
when we create the sales orders which are relevent for MRP i. e with scehedule line category CP, It should definitely appear in MD04 immediately.
oflate I am finding , there is a time lag ,between order creation time & time of appearing in MD04, of 10 /15 hrs.
I have never encountered such a situation earlier.
This is happening at times.
I am not finding any OSS notes pertaining to this scenario.
Can any one though some lighton this tell me what could be the reason.
Regards
YMREDDY

Hi,
The Sales requirements are stored in a table VBBE and VBBS, when order is created or changed. The MD04 read the records from the above tables and display the records. I don't think there is a definite answer for this problem, except check your config. and check your user exits. The problems will occure when you have more customization to your Sales order process.
If you are able to reproduce the problem then it is easy to track the issue by activating and inactivateing the user exits.
There is a program SDRQCR21 provided by SAP which fixes the sales requirement descripancies. Take a look at the Note: 25444
Thanks
balu

Sales orders not showing on MD04

Hi Gurus,
Last week we had copied production environment into quality system. Now when the users are creating sales orders in Q system, they are not able to see the sales orders in MD04? What is the reason for this?
Thanks
Anusha

Go to your sales order and note the schedule line category of the line item which you want to check
In t code VOV6 for the schedule line category there is a check box for transfer of requirements near to Availabilty check tick box
If you tick that then this order for this line item will appear in MD04
Check :
MD04 - Configuration Points
http://sap.ittoolbox.com/groups/technical-functional/sap-log-pp/md04-issue-sales-orders-2584812

Should Third party order items appear in mD04

Dear experts,
We create third party orders where material is directly shipped to our customer from our vendors, material does not come to our inventory, why such orders appear in MD04 , not only orders the PO created for such delivery also appears, we use planning strategy 40 for the material.
I will appreciate If any one can explain why such orders should appear in MD04 and affect planning.
Thanks in advance.
Anand Tripathi

They should not be, self answered

PO not appearing on MD04

Similar Messages

Maybe you are looking for