PO not created after approval.

Hi
We are working on SRM4.0 classic scenario with SAP R/3 4.7.
We are having following scenarios to create backend docs.
1. All SC created from catalog should create PO in backend R/3.
2. All SC created using Free text description (All non catalog items) should generate PR in backend.
All PRs are getting generated perfectly as per point 2.
But the problem is with point 1 where PO is not getting generated in backend after approval is done.
As per my analysis, system is picking the PO number and object type perfectly. But all these records exists in BBP_DOCUMENT_TAB. Even after running CLEAN_REQREQ_UP also they are not going to backend.
In BBP_PD it shows I111 Item in transfer process with no check in inactive column.
No errors in SC monitor(RZ20).
I dont know where am I missing. Checked all possible things.
Did anyone faced such situation please throw some light on this.
Thanks in advance
Jagadish

Jagdish
Not sure, try to run FM BBP_PD_PO_TRANSFER_EXEC...
Regards
Reddy

Similar Messages

MIGO should not create after PO Delivery Date

Hi,
We have a PO with multiple line items and diff. Delivery Dates...
We want that during MIGO Process, Posting Date should not exceed to PO Delivery Date.
Means, if PO Delivery Date is 05.07.2014, then MIGO should not created after this date...
Please suggest.

If you want to achieve the scenario with standard settings, then you can use the field "Latest GR date".
Just put the same date as delivery date in this field. Then system will not allow to do GR if the Posting date is exceed with compare this date in MIGO.
You can find the latest GR date in Delivery tab in PO. Also you can maintain the field as mandatory in PO to avoid the field value blank as per your requirement.
Also if you want to change Latest GR date along with delivery date, just take the steps which is explained in this document Mass changes from one field to another field.
**Edited by: Dëv Päträ

PO not created after complete Approval of SC.

Hi Experts,
I am working with classic scenario with SRM 7.0.
I have an issue related to creation of PO at backend.
After complete approval of SC PO is not created in backend. The status of SC is showing as Approved.
There is no error in RZ20 or Application monitor.
Can you give some touch points where can I find some errors or reason for this.
Where can I check the PO create BAPI is called on approval of SC.
Please help me in this regard.
Regards,
B.N.Karthi

Hi
go to your BBP_PD
click item data
and search for your PO ?
you must have PO there ?
or check ANY ENTRY IN BBP_DOCUEMNT_TAB
Do YOU have valid source of supply?
E_OBJECT_ID-BBP_PDBEI - WHAT IS THER INSIDE?
As laurent staed below, you must check item status too :- it could be purchaser work list too or error in process or can not be ordered...
Muthu

TR was not created after MIGO

Hi, experts
Sometimes after I did goods receipt with MIGO for purchsing order, the TR was not created by system. Normally after MIGO system create material document and TR at same time, then I use LT06 with reference the document no. place it to the storage bin.
But for this case, no TR generaged. I can only use LT10 /mvt999 to move them to the storage bin.
Can you please tell me the possible reason for this problem( TR not created)?

Can you please check what is the movement type being used ? If you were able to use LT06 in some cases means that most probably 101 is correctly defined in LE--> Interfaces --> Movement types to trigger the TR's.
1) however, if you are using / different movement type is being triggered and is not set up to create the TR.
2) If you see that the movement type is still 101, you could still be creating the TR's in the background, however, if you have a background job or some other transaction that is confirming the open TR's , this could be one of the reasons why you are not able to use LT06.
For this you can go to MIGO ( go to display tab for material document) , go to WM tab and find out the TR # there.
You can then go to LB03 and if you scroll to the right , you will find the TO # created.
Please go to LT21 and check who and how the TO is being created / confirmed, if thats something out of the process for you.
Thanks

PR not created after creating 3rd Party Sales Order

Hi SAP,
We have 3rd Party Sales Order process. The Problem is, PR number is not generate after creating 3rd Party Sales Order.
the problem happen for particular customer only. I already check the credit limit and its okay.
need help,

If the PR is not getting created, please click on the Incompletion log in the SO to check for any missing data.
If it is complete use VKM3 transaction to check if the SO needs a credit release., if needed relase the SO and the PR will get generated.
Check if the material is maintained for purchasing or not.

Sales order not editable after approval procedure

Dear SAP,
for a customer we need to find out a way to edit sales orders after approval. Example: User fills a sales order with more than 100 positions and had a typing error which is realized later.
Next example: Customer wants the delivery conditions to be changed. We know that changing a document after approval might sound strange - but the customer's processes are like that.
Thanks a lot in advance, sincerely
Guido

It is not strange that every now and then, users have requests to change a document after approval. However, the discipline is absolutely necessary here. There is no room for you to change. Otherwise, the approval procedure may not be that useful. If there is typo, you have to recreate the document. Next time the problem would be less. If unfortunately customer wants the delivery conditions to be changed, then you have to recreate the document too.
Thanks,
Gordon

Notification create after approval

Hi,
We have a reqirment to create maintenance notification only afer approval,
I am using buisness objet BUS2038 and Created event for triggering the workflow.
It is working fine workitem comes to approver but notification is getting created means approval step does not have any significance , How can I restrict the notification untill it is approved.
Regards
Bikas

Hi BT,
dont know if there is an option of canceling a maintenance notification, if its possible, then let the user create a notification, let the approver get the workitem and once the approver rejects it, the workflow would cancel the maintenance notification (may be some BAPI's exist to do this).
If such a functionality doesnt exist in the business process, then you need to search for a user-exit or enhancement which would trigger a workflow the moment a maintenance notification is saved and would save (commit-the technical term) only if approver approves it.
Hope it helps.
Aditya
P.S shall watch this thread for answers from gurus who have worked on Maintenance Notifications.

COPA DOCUMENT NOT CREATED AFTER BILLING

HI
COPA document is not created while doing the sale order cycle
Ive carried a standard sales cycle that contains sales order (VA01),
Delivery (VL01n) and billing document (VF01). System should generate 4
documents as follows
1) FI Document
2) CO Document
3) Profit Center Accounting Document
4) COPA Document
But in my case only 3 documents are generated instead of COPA.
I completed the total COPA configuration with creation of operating concern and assigned SD condition types. And also maintained number range for actual copa line items.
Fllowing things are done.
1) assignment of controlling area to Operating concern .
2) controlling area setting activate profitability analysis.
3)Valuation Strategies are assigned to the Points of Valuation in ke4u.
4)SD Quantity Field to a COPA Quantity Field (Normally FKIMG assigned to ABSMG).
when we excute the transcation KE4S system display the error Document "XXXXXXXXXX" is not profit-related and thus could not be transferred.
when we go back to the Billing Document in the Change mode, click on the PSG button in Account Assignment it is showing some characterstics also.

Hi
I have already mentioned in my pervious mail what the activities done by me. Quantity filed are already assign KE4M.Please do needful for me and give me suitable answer.

MP Related Logs and IIS Virtual directory not created After re_installation of SCCM 2007

Hi
We have re-installed the IIS and SCCM secondary site. tried to intsall the MP role and DP role but it has not created any logs or IIS virtual directory in the secondary site server which is in WAN link.
Trouble shooting:
- checked the ports 443,445 and 80
- Disabled symantec
- exchanged the public key ( still it is in progress in Despooler log)
- checked the site to site permission and added the accounts.
please suggest further.

Yes, I know this is an old post, but I’m trying to clean them up.
What error(s) are you getting within the logs? Without these details there isn’t much anyone can do to help you.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

PR not created after MRP

Hello SAP Gurus!
We are having a problem regarding PR creation.
No PR is created after running MRP and we have a lot of requirements.
What do you think is the problem?
How to check?
Thanks in advance

Hi again,
Kindly let me know have you check these 3 steps below for you
1) Requirement Planning for the corresponding plant must be activated in customizing for material management under consumption based planning -
>Planning------>Activate Material Requirement Planning
2)The Plant parameters for the corresponding plant must be activated in customizing for material management under consumption based planning->Plant Parameters-->Carryout overall maintenance of plant parameters
3) In the material master record, you have to maintain the MRP data of the materials that are subject to automatic plannning
Viz , MRP TYPE, MRP GROUP...Etc
If tthe above steps are ok then check the material master record of material of which MRP run is resulting in no Purchase requistion, Kindly check the MRP Views and see whether field of MRP Type is showing ND i.e. No Planning.
Change the same to consumption based planning and get your reults.
I hope this will solve your problem.
Regards,
Tushar Patankar

Promotion Condition (VKA0) Not Created after activation

Hi
We currently activate promotions using WAK5 and WAK16. On WAK5 you can see the status of the sales price condition is set at B, however the VKA0 condition is not created.
In the process we perform supply source determination 45 days before the promotion start date (this is done for F&R) and we activate the promotion 5 days before the start date (this is done for our POS system)
What could be the cause of the VKA0 condition not being created?
Rgds

Hi Sush,
In that table where the path you indicate takes you, you just need to insert the following entries:
BIDDER
COLLAB
EVALUA
EXTERN
INTERN
Hope this will help you.
By the way, where are you implementing PPS?
Best regards,
André Sousa

Sapdata3 has been not created after Sap Neatweaver 7.3

Hi Gurus,
I have done the installation for SAP Netweaver 7.3 Java stack with distributed option with oracle database .
However file system created is sapdata1,sapdata2 , and sapdata4 has been created but sapdata3 is not created .
can any one susggest.
Regards,
Jeetendra

Hi Jeetendra,
Check whether you system is up and running ?
If yes, then sapdata3 is a folder created under /oracle/SID or /oracle based on your file system structure.
As right mentioned SAP installer will not create any file system. If file system /oracle/SID/sapdata3 is not available, SAP installer will create a folder sapdata3 under /oracle/SID and respective data files will be created under the same.
Hope this helps.
Regards,
Deepak Kori

Knowledge modules files were not created after ODI installed

I installed ODI 10.1.3.5 on my Windows XP laptop and found that there are no Knowledge Module files in the directory ODI_HOME/oracledi/doc/km. Should these files be created after ODI installed or do we need to do something to create there KM files ? Appreciate if somebody can answer this ?
Thanks in advance,
Ram

Hi Ram,
Are you talking about KM XML files ? If yes then these are located at ODI_HOME/oracledi/impexp
Under ODI_HOME\oracledi\doc\km you will get the PDF document about KM development guide .
Thanks,
Sutirtha

Automatic schedule lines not creating after MD03

HI Gurus,
When I am running MD03 system is creating Pur. Requisitions instead of Schedule lines
I am running with
NETCH
2
3
1
1
1
29102011
Data maintained
1.Material master /vendor master Auto po ticked (MRP type VB ROP 500 ,Safety stock 600, current stock 200)
2.Sch. Agreement created with LP (validity period, Qty ok)
3.Pur. Info rec maintained for vendor material for the plant.
4.Source list maintained with Vendor,scheduling agreement no ,item no, MRP indicator 2 Fixed vendor ticked
Now after Running MD03
Pur. Req created for 400 qty
but when I click on Procurement proposal manually I can select Del. Schedule and create
but system is asking Agreement no. item,qty etc (I already maintained Source list system is asking again )
Then why not system creating automatically..
Please help..
Thanks in advance

Thanks Jürgen,
It was a problem of Date ,validity period of the SA.
which I sort out any way thank you. for your input

Netlogon and SYSVOL shares are not created after DCPROMO in Windows 2012

Hi
When i run a dcpromo on my windows 2012 server (all dc's are windows 2012)
On the new domain controller i don't have sysvol or netlogon share.
All the sugestions i found in social refer to FRS but in server 2012 DFS is used, no idea how to troubel shoot this problem.
All dcdiag on all DC before promo where clean
dcidag on srv01 the new dc shows:
Doing initial required tests
Testing server: Bas\SRV01
Starting test: Connectivity
......................... SRV01 passed test Connectivity
Doing primary tests
Testing server: Bas\SRV01
Starting test: Advertising
Warning: DsGetDcName returned information for
\\SRV09.dikkenberg.local, when we were trying to reach SRV01.
SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE.
......................... SRV01 failed test Advertising
Starting test: FrsEvent
......................... SRV01 passed test FrsEvent
Starting test: DFSREvent
There are warning or error events within the last 24 hours after the
SYSVOL has been shared. Failing SYSVOL replication problems may cause
Group Policy problems.
......................... SRV01 passed test DFSREvent
Starting test: SysVolCheck
......................... SRV01 passed test SysVolCheck
Starting test: KccEvent
......................... SRV01 passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... SRV01 passed test KnowsOfRoleHolders
Starting test: MachineAccount
......................... SRV01 passed test MachineAccount
Starting test: NCSecDesc
......................... SRV01 passed test NCSecDesc
Starting test: NetLogons
Unable to connect to the NETLOGON share! (\\SRV01\netlogon)
[SRV01] An net use or LsaPolicy operation failed with error 67,
The network name cannot be found..
......................... SRV01 failed test NetLogons
Starting test: ObjectsReplicated
......................... SRV01 passed test ObjectsReplicated
Starting test: Replications
......................... SRV01 passed test Replications
Starting test: RidManager
......................... SRV01 passed test RidManager
Starting test: Services
......................... SRV01 passed test Services
Starting test: SystemLog
A warning event occurred. EventID: 0x000727A5
Time Generated: 02/26/2013 21:55:22
Event String:
The WinRM service is not listening for WS-Management requests.
An error event occurred. EventID: 0x00001001
Time Generated: 02/26/2013 21:58:10
Event String:
The machine SRV01 attempted to join the domain dikkenberg.local but
failed. The error code was 1332.
A warning event occurred. EventID: 0x000727A5
Time Generated: 02/26/2013 22:00:04
Event String:
The WinRM service is not listening for WS-Management requests.
A warning event occurred. EventID: 0x000727A5
Time Generated: 02/26/2013 22:08:43
Event String:
The WinRM service is not listening for WS-Management requests.
A warning event occurred. EventID: 0x0000008E
Time Generated: 02/26/2013 22:10:22
Event String:
The time service has stopped advertising as a time source because th
e local clock is not synchronized.
A warning event occurred. EventID: 0x00001796
Time Generated: 02/26/2013 22:24:05
Event String:
Microsoft Windows Server has detected that NTLM authentication is pr
esently being used between clients and this server. This event occurs once per b
oot of the server on the first time a client uses NTLM with this server.
......................... SRV01 failed test SystemLog
Starting test: VerifyReferences
......................... SRV01 passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : dikkenberg
Starting test: CheckSDRefDom
......................... dikkenberg passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... dikkenberg passed test CrossRefValidation
Running enterprise tests on : dikkenberg.local
Starting test: LocatorCheck
......................... dikkenberg.local passed test LocatorCheck
Starting test: Intersite
......................... dikkenberg.local passed test Intersite
C:\Users\administrator.DIKKENBERG>
Dcdiag on good dc:
Performing initial setup:
Trying to find home server...
Home Server = SRV09
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Bas\SRV09
Starting test: Connectivity
......................... SRV09 passed test Connectivity
Doing primary tests
Testing server: Bas\SRV09
Starting test: Advertising
......................... SRV09 passed test Advertising
Starting test: FrsEvent
......................... SRV09 passed test FrsEvent
Starting test: DFSREvent
There are warning or error events within the last 24 hours after the
SYSVOL has been shared. Failing SYSVOL replication problems may cause
Group Policy problems.
......................... SRV09 passed test DFSREvent
Starting test: SysVolCheck
......................... SRV09 passed test SysVolCheck
Starting test: KccEvent
A warning event occurred. EventID: 0x80000B46
Time Generated: 02/26/2013 22:42:36
Event String:
The security of this directory server can be significantly enhanced
by configuring the server to reject SASL (Negotiate, Kerberos, NTLM, or Digest)
LDAP binds that do not request signing (integrity verification) and LDAP simple
binds that are performed on a cleartext (non-SSL/TLS-encrypted) connection. E
ven if no clients are using such binds, configuring the server to reject them wi
ll improve the security of this server.
......................... SRV09 passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... SRV09 passed test KnowsOfRoleHolders
Starting test: MachineAccount
......................... SRV09 passed test MachineAccount
Starting test: NCSecDesc
......................... SRV09 passed test NCSecDesc
Starting test: NetLogons
......................... SRV09 passed test NetLogons
Starting test: ObjectsReplicated
......................... SRV09 passed test ObjectsReplicated
Starting test: Replications
......................... SRV09 passed test Replications
Starting test: RidManager
......................... SRV09 passed test RidManager
Starting test: Services
......................... SRV09 passed test Services
Starting test: SystemLog
An error event occurred. EventID: 0x00000457
Time Generated: 02/26/2013 21:57:13
Event String:
Driver Samsung CLP-320 Series required for printer Samsung CLP-320 S
eries is unknown. Contact the administrator to install the driver before you log
in again.
An error event occurred. EventID: 0x00000457
Time Generated: 02/26/2013 21:57:13
Event String:
Driver DYMO LabelWriter 400 Turbo required for printer DYMO LabelWri
ter 400 Turbo is unknown. Contact the administrator to install the driver before
you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 02/26/2013 21:57:13
Event String:
Driver Send to Microsoft OneNote 15 Driver required for printer Verz
enden naar OneNote 2013 is unknown. Contact the administrator to install the dri
ver before you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 02/26/2013 21:57:14
Event String:
Driver Microsoft XPS Document Writer required for printer Microsoft
XPS Document Writer is unknown. Contact the administrator to install the driver
before you log in again.
A warning event occurred. EventID: 0x000016AF
Time Generated: 02/26/2013 22:34:50
Event String:
During the past 4.24 hours there have been 20 connections to this Do
main Controller from client machines whose IP addresses don't map to any of the
existing sites in the enterprise. Those clients, therefore, have undefined sites
and may connect to any Domain Controller including those that are in far distan
t locations from the clients. A client's site is determined by the mapping of it
s subnet to one of the existing sites. To move the above clients to one of the s
ites, please consider creating subnet object(s) covering the above IP addresses
with mapping to one of the existing sites. The names and IP addresses of the cl
ients in question have been logged on this computer in the following log file '%
SystemRoot%\debug\netlogon.log' and, potentially, in the log file '%SystemRoot%\
debug\netlogon.bak' created if the former log becomes full. The log(s) may conta
in additional unrelated debugging information. To filter out the needed informat
ion, please search for lines which contain text 'NO_CLIENT_SITE:'. The first wor
d after this string is the client name and the second word is the client IP addr
ess. The maximum size of the log(s) is controlled by the following registry DWOR
D value 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Netlogon\Parameter
s\LogFileMaxSize'; the default is 20000000 bytes. The current maximum size is 2
0000000 bytes. To set a different maximum size, create the above registry value
and set the desired maximum size in bytes.
A warning event occurred. EventID: 0x0000000B
Time Generated: 02/26/2013 22:42:06
Event String:
Custom dynamic link libraries are being loaded for every application
. The system administrator should review the list of libraries to ensure they ar
e related to trusted applications. Please visit http://support.microsoft.com/kb/
197571 for more information.
A warning event occurred. EventID: 0x000727AA
Time Generated: 02/26/2013 22:43:09
Event String:
The WinRM service failed to create the following SPNs: WSMAN/SRV09.d
ikkenberg.local; WSMAN/SRV09.
A warning event occurred. EventID: 0x000003F6
Time Generated: 02/26/2013 22:43:11
Event String:
Name resolution for the name _msdcs.dikkenberg.local timed out after
none of the configured DNS servers responded.
A warning event occurred. EventID: 0x000003F6
Time Generated: 02/26/2013 22:43:11
Event String:
Name resolution for the name dikkenberg.local timed out after none o
f the configured DNS servers responded.
A warning event occurred. EventID: 0x0000000C
Time Generated: 02/26/2013 22:43:13
Event String:
Time Provider NtpClient: This machine is configured to use the domai
n hierarchy to determine its time source, but it is the AD PDC emulator for the
domain at the root of the forest, so there is no machine above it in the domain
hierarchy to use as a time source. It is recommended that you either configure a
reliable time service in the root domain, or manually configure the AD PDC to s
ynchronize with an external time source. Otherwise, this machine will function a
s the authoritative time source in the domain hierarchy. If an external time sou
rce is not configured or used for this computer, you may choose to disable the N
tpClient.
A warning event occurred. EventID: 0x00001796
Time Generated: 02/26/2013 22:43:50
Event String:
Microsoft Windows Server has detected that NTLM authentication is pr
esently being used between clients and this server. This event occurs once per b
oot of the server on the first time a client uses NTLM with this server.
An error event occurred. EventID: 0x00000457
Time Generated: 02/26/2013 22:44:12
Event String:
Driver Samsung CLP-320 Series required for printer Samsung CLP-320 S
eries is unknown. Contact the administrator to install the driver before you log
in again.
An error event occurred. EventID: 0x00000457
Time Generated: 02/26/2013 22:44:16
Event String:
Driver Send to Microsoft OneNote 15 Driver required for printer Verz
enden naar OneNote 2013 is unknown. Contact the administrator to install the dri
ver before you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 02/26/2013 22:44:16
Event String:
Driver DYMO LabelWriter 400 Turbo required for printer DYMO LabelWri
ter 400 Turbo is unknown. Contact the administrator to install the driver before
you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 02/26/2013 22:44:17
Event String:
Driver Microsoft XPS Document Writer required for printer Microsoft
XPS Document Writer is unknown. Contact the administrator to install the driver
before you log in again.
......................... SRV09 failed test SystemLog
Starting test: VerifyReferences
......................... SRV09 passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : dikkenberg
Starting test: CheckSDRefDom
......................... dikkenberg passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... dikkenberg passed test CrossRefValidation
Running enterprise tests on : dikkenberg.local
Starting test: LocatorCheck
......................... dikkenberg.local passed test LocatorCheck
Starting test: Intersite
......................... dikkenberg.local passed test Intersite
With kind regards, Bas van den Dikkenberg

Doing primary tests
Testing server: Bas\SRV01
Starting test: Advertising
Warning: DsGetDcName returned information for
\\SRV09.dikkenberg.local, when we were trying to reach SRV01.
SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE.
......................... SRV01 failed test Advertising
"SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE"
this error means that the DC is in USN rollback state.
srv01 is not usn rollback see:
test from other DC:
Doing primary tests
Testing server: Ouders\SRV10
Starting test: Advertising
......................... SRV10 passed test Advertising
Starting test: FrsEvent
......................... SRV10 passed test FrsEvent
Test from srv09:
Doing primary tests
Testing server: Bas\SRV09
Starting test: Advertising
......................... SRV09 passed test Advertising
Starting test: FrsEvent
......................... SRV09 passed test FrsEvent
With kind regards, Bas van den Dikkenberg

PO not created after approval.

Similar Messages

Maybe you are looking for