PO not created after complete Approval of SC.

Hi Experts,
I am working with classic scenario with SRM 7.0.
I have an issue related to creation of PO at backend.
After complete approval of SC PO is not created in backend. The status of SC is showing as Approved.
There is no error in RZ20 or Application monitor.
Can you give some touch points where can I find some errors or reason for this.
Where can I check the PO create BAPI is called on approval of SC.
Please help me in this regard.
Regards,
B.N.Karthi

Hi
go to your BBP_PD
click item data
and search for your PO ?
you must have PO there ?
or check ANY ENTRY IN BBP_DOCUEMNT_TAB
Do YOU have valid source of supply?
E_OBJECT_ID-BBP_PDBEI - WHAT IS THER INSIDE?
As laurent staed below, you must check item status too :- it could be purchaser work list too or error in process or can not be ordered...
Muthu

Similar Messages

MIGO should not create after PO Delivery Date

Hi,
We have a PO with multiple line items and diff. Delivery Dates...
We want that during MIGO Process, Posting Date should not exceed to PO Delivery Date.
Means, if PO Delivery Date is 05.07.2014, then MIGO should not created after this date...
Please suggest.

If you want to achieve the scenario with standard settings, then you can use the field "Latest GR date".
Just put the same date as delivery date in this field. Then system will not allow to do GR if the Posting date is exceed with compare this date in MIGO.
You can find the latest GR date in Delivery tab in PO. Also you can maintain the field as mandatory in PO to avoid the field value blank as per your requirement.
Also if you want to change Latest GR date along with delivery date, just take the steps which is explained in this document Mass changes from one field to another field.
**Edited by: Dëv Päträ

TACACS enable password is not working after completing ACS & MS AD integration

Enable password for (Router, Switches) is working fine if identify source is "Internal Users", unfortunately after completed the integration between ACS to MS AD, and change the Identity source to "AD1" I got the following result
1. able to access network device (cisco switch) using MS AD username and password via SSH/Telnet.
2. Enable password is not working (using the same user password configured in MS AD.
3. When I revert back and change the ACS identity source from "AD1" to "Internal Users" enable password is working fine.
Switch Tacacs Configuration
aaa new-model
aaa authentication login default none
aaa authentication login ACS group tacacs+ local
aaa authentication enable default group tacacs+ enable
aaa authorization exec ACS group tacacs+ local
aaa authorization commands 15 ACS group tacacs+ local
aaa accounting exec ACS start-stop group tacacs+
aaa accounting commands 15 ACS start-stop group tacacs+
aaa authorization console
aaa session-id common
tacacs-server host 10.X.Y.11
tacacs-server timeout 20
tacacs-server directed-request
tacacs-server key gacakey
line vty 0 4
session-timeout 5
access-class 5 in
exec-timeout 5 0
login authentication ACS
authorization commands 15 ACS
authorization exec ACS
accounting commands 15 ACS
accounting exec ACS
logging synchronous
This is my first ACS - AD integration experience, hoping to fix this issue with your support, thanks in advance.
Regards,

Hi Edward,
I created a new shell profiles named "root" as the default one "Permit Access" can't be access or modified, underneath the steps I've made.
1. Create a new shell profile name "root" with max privilege of 15. And then used it in "Default Device Admin/Authorization/Rule-1" shell profile - see attached file for more details.
2. Telnet the Switch and then Issue "debug aaa authentication" using both "Root Shell" and "Permit Access" applied in Rule-1 profile.
Note:
I also attached here the captured screen and debug result for the "shell profiles"

PR not created after creating 3rd Party Sales Order

Hi SAP,
We have 3rd Party Sales Order process. The Problem is, PR number is not generate after creating 3rd Party Sales Order.
the problem happen for particular customer only. I already check the credit limit and its okay.
need help,

If the PR is not getting created, please click on the Incompletion log in the SO to check for any missing data.
If it is complete use VKM3 transaction to check if the SO needs a credit release., if needed relase the SO and the PR will get generated.
Check if the material is maintained for purchasing or not.

COPA DOCUMENT NOT CREATED AFTER BILLING

HI
COPA document is not created while doing the sale order cycle
Ive carried a standard sales cycle that contains sales order (VA01),
Delivery (VL01n) and billing document (VF01). System should generate 4
documents as follows
1) FI Document
2) CO Document
3) Profit Center Accounting Document
4) COPA Document
But in my case only 3 documents are generated instead of COPA.
I completed the total COPA configuration with creation of operating concern and assigned SD condition types. And also maintained number range for actual copa line items.
Fllowing things are done.
1) assignment of controlling area to Operating concern .
2) controlling area setting activate profitability analysis.
3)Valuation Strategies are assigned to the Points of Valuation in ke4u.
4)SD Quantity Field to a COPA Quantity Field (Normally FKIMG assigned to ABSMG).
when we excute the transcation KE4S system display the error Document "XXXXXXXXXX" is not profit-related and thus could not be transferred.
when we go back to the Billing Document in the Change mode, click on the PSG button in Account Assignment it is showing some characterstics also.

Hi
I have already mentioned in my pervious mail what the activities done by me. Quantity filed are already assign KE4M.Please do needful for me and give me suitable answer.

TR was not created after MIGO

Hi, experts
Sometimes after I did goods receipt with MIGO for purchsing order, the TR was not created by system. Normally after MIGO system create material document and TR at same time, then I use LT06 with reference the document no. place it to the storage bin.
But for this case, no TR generaged. I can only use LT10 /mvt999 to move them to the storage bin.
Can you please tell me the possible reason for this problem( TR not created)?

Can you please check what is the movement type being used ? If you were able to use LT06 in some cases means that most probably 101 is correctly defined in LE--> Interfaces --> Movement types to trigger the TR's.
1) however, if you are using / different movement type is being triggered and is not set up to create the TR.
2) If you see that the movement type is still 101, you could still be creating the TR's in the background, however, if you have a background job or some other transaction that is confirming the open TR's , this could be one of the reasons why you are not able to use LT06.
For this you can go to MIGO ( go to display tab for material document) , go to WM tab and find out the TR # there.
You can then go to LB03 and if you scroll to the right , you will find the TO # created.
Please go to LT21 and check who and how the TO is being created / confirmed, if thats something out of the process for you.
Thanks

Import not responding after completing the import process

Hi All,
This is the problem i am facing:
1. Imp utility is not terminated after the import process is done. Had to manually terminate the process with ctrl+c or ctrl+break.
2. Log Files are not generated properly. Log file are created and updated partially.
3. Although database is effected with all the changes there in the dump file, it is not being shown on the screen (and hence log is not appended).
4. When using SHOW=Y parameter, Imp process is terminated successfully with success/warning/error messages and log files are generated properly.
I have checked in the database: although the results are not shown on the screen ( or log not getting generated), the db is effected with all changes in the dump file up to last line.
5. Commands I have fired:
imp [email protected] file='Y:\IDW Analysis for Initial Load\IDW Data\isdshrd_temp\GROUP_DIM.dmp' log=c:\ImpLogs\ACCESS_GROUP_DIM.log fromuser=GEAM_DIM touser=kanchk
imp [email protected] file='Y:\IDW Analysis for Initial Load\IDW Data\ACCOUNTING_BASIS_DIM.dmp' log=c:\ImpLogs\ACCOUNTING_BASIS_DIM.log fromuser=GEAM_DIM touser=kanchk show=y
Please respond asap
Thanks,
Kishore

As an experiment, can you try to import the same on the database server itself. This will help us to understand is it network issue or something else.
Wait Event Description
http://download-east.oracle.com/docs/cd/B10501_01/server.920/a96536/apa5.htm#970961

MP Related Logs and IIS Virtual directory not created After re_installation of SCCM 2007

Hi
We have re-installed the IIS and SCCM secondary site. tried to intsall the MP role and DP role but it has not created any logs or IIS virtual directory in the secondary site server which is in WAN link.
Trouble shooting:
- checked the ports 443,445 and 80
- Disabled symantec
- exchanged the public key ( still it is in progress in Despooler log)
- checked the site to site permission and added the accounts.
please suggest further.

Yes, I know this is an old post, but I’m trying to clean them up.
What error(s) are you getting within the logs? Without these details there isn’t much anyone can do to help you.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

PR not created after MRP

Hello SAP Gurus!
We are having a problem regarding PR creation.
No PR is created after running MRP and we have a lot of requirements.
What do you think is the problem?
How to check?
Thanks in advance

Hi again,
Kindly let me know have you check these 3 steps below for you
1) Requirement Planning for the corresponding plant must be activated in customizing for material management under consumption based planning -
>Planning------>Activate Material Requirement Planning
2)The Plant parameters for the corresponding plant must be activated in customizing for material management under consumption based planning->Plant Parameters-->Carryout overall maintenance of plant parameters
3) In the material master record, you have to maintain the MRP data of the materials that are subject to automatic plannning
Viz , MRP TYPE, MRP GROUP...Etc
If tthe above steps are ok then check the material master record of material of which MRP run is resulting in no Purchase requistion, Kindly check the MRP Views and see whether field of MRP Type is showing ND i.e. No Planning.
Change the same to consumption based planning and get your reults.
I hope this will solve your problem.
Regards,
Tushar Patankar

Promotion Condition (VKA0) Not Created after activation

Hi
We currently activate promotions using WAK5 and WAK16. On WAK5 you can see the status of the sales price condition is set at B, however the VKA0 condition is not created.
In the process we perform supply source determination 45 days before the promotion start date (this is done for F&R) and we activate the promotion 5 days before the start date (this is done for our POS system)
What could be the cause of the VKA0 condition not being created?
Rgds

Hi Sush,
In that table where the path you indicate takes you, you just need to insert the following entries:
BIDDER
COLLAB
EVALUA
EXTERN
INTERN
Hope this will help you.
By the way, where are you implementing PPS?
Best regards,
André Sousa

Sapdata3 has been not created after Sap Neatweaver 7.3

Hi Gurus,
I have done the installation for SAP Netweaver 7.3 Java stack with distributed option with oracle database .
However file system created is sapdata1,sapdata2 , and sapdata4 has been created but sapdata3 is not created .
can any one susggest.
Regards,
Jeetendra

Hi Jeetendra,
Check whether you system is up and running ?
If yes, then sapdata3 is a folder created under /oracle/SID or /oracle based on your file system structure.
As right mentioned SAP installer will not create any file system. If file system /oracle/SID/sapdata3 is not available, SAP installer will create a folder sapdata3 under /oracle/SID and respective data files will be created under the same.
Hope this helps.
Regards,
Deepak Kori

Knowledge modules files were not created after ODI installed

I installed ODI 10.1.3.5 on my Windows XP laptop and found that there are no Knowledge Module files in the directory ODI_HOME/oracledi/doc/km. Should these files be created after ODI installed or do we need to do something to create there KM files ? Appreciate if somebody can answer this ?
Thanks in advance,
Ram

Hi Ram,
Are you talking about KM XML files ? If yes then these are located at ODI_HOME/oracledi/impexp
Under ODI_HOME\oracledi\doc\km you will get the PDF document about KM development guide .
Thanks,
Sutirtha

PO not created after approval.

Hi
We are working on SRM4.0 classic scenario with SAP R/3 4.7.
We are having following scenarios to create backend docs.
1. All SC created from catalog should create PO in backend R/3.
2. All SC created using Free text description (All non catalog items) should generate PR in backend.
All PRs are getting generated perfectly as per point 2.
But the problem is with point 1 where PO is not getting generated in backend after approval is done.
As per my analysis, system is picking the PO number and object type perfectly. But all these records exists in BBP_DOCUMENT_TAB. Even after running CLEAN_REQREQ_UP also they are not going to backend.
In BBP_PD it shows I111 Item in transfer process with no check in inactive column.
No errors in SC monitor(RZ20).
I dont know where am I missing. Checked all possible things.
Did anyone faced such situation please throw some light on this.
Thanks in advance
Jagadish

Jagdish
Not sure, try to run FM BBP_PD_PO_TRANSFER_EXEC...
Regards
Reddy

EWA session not created after refresh_session in SDCCN

Hi All,
I have configured EWA in our SolMan 7.1 for our managed system SAP BW 7.0, and to test it, I've been trying to create an adhoc EWA report manually. However, after the completion of refresh_session tasks in the managed system's SDCCN, no EWA session is being created.
I have already followed instructions in SAP Note 1769513 - EWA not generated - session data is overdue (red flag status), but I'm still stuck with this error.
Please advise.
Thanks.

Hi,
You are using solution manager 7.1, so here are couple on KBAs which can help you to get the EWAs.
1907383 - How to setup and troubleshoot EarlyWatch Alert reports in SAP Solution Manager 7.1
1924199 - EarlyWatch Alert Management SP10+
Also follow the recommendations of RTCCTOOL.
To generate an Ad-hoc EWA, yo can look into this wiki.
How to create an Ad Hoc EWA report in Solution Manager 7.1 - Solution Manager - SCN Wiki
Further, to understand and troubleshoot, please read the EWA workflow
The EWA workflow - a closer look - Solution Manager - SCN Wiki
I hope, all this should help you in fixing your issue.
Regards

App not available after Apple approval

I have problem to
ı upload the app itunes they send me email '24 hours before your app is available on the App Store. This delay is dependent on any app availability issues.' after 48 hours later we didnt see our app apple store. After we add new version 1.2 and now we wait. but ı dont know when our app will be publish
can u help me?

Hi, Please read this information
" I have one app ready to sale (viewer type multi-issue) and now I did create the in-app purchase to upload a folio as retail issue within it.
I read in Itunes connect guide that the first time I upload the in-app-purchase need to be together the new version of app.
Then, I create the new branded app - viewer type: Multi-issue (not multi-issue with subscription) - and I did the sand box test with ipa. All works well."
You need to be approved the in-app too. To regular magazines send before to apple the in-apps then so after you publish the folio - with the same product ID
Regards

PO not created after complete Approval of SC.

Similar Messages

Maybe you are looking for