PO Not Editable When Created From BAPI

Hi Friends,
I have created Purchase Order thru BAPI BAPI_SALESORDER_CREATEFROMDAT2
it is created successfully.
But I am not able to EDIT the Purchase Order in ME22N. Whatever I make changes is not saved.
Kindly confirm is there any parameter in this BAPI which I need to set.
Regards,
Pradeep

You might created this PO with the reference of the sales order .can you confirm?
Amit.

Similar Messages

  • Can not edit or create new power points since installing Yosemite.

    I can not edit or create new power points since installing Yosemite.  I can open and run the power points I have previously created but every time I try and edit or create a new power point it simple comes up with this
    Also when I open the font drop down menu all the font names are in Chinese

    Have you run all the office updates? We have to assume this is a proper copy of Office 11 of course and not one 'from Hxxx-Kxxx'. I  would also consider re-installing Yosemite-something is screwy on your installation of something if its picking up China..unless of course it is true that the Chinese have been hacking into iTunes and are secretly trying to make you into an agent of the state..you will speak Mandarin..you will speak Mandarin  

  • Partner function not working when creating PO with ref to PReq

    Partner function is not working when creating a Purchase Order with ref to a Purchase Requistion, Partner functions maintained in the vendor master are VN, OA & PI.
    But OA & PI are not appearing in the PO header partner tab when created with ref to PR.
    however it works when i create the PO directly ( without the PR ref )
    I am using the same material & Plant for both manual PO & PR to PO.
    Any idea what could be wrong .
    I have maintained the settings for schema groups for vendor master & purchasing doc in the partner determination.
    Thanks
    Dkmurthy

    Hi,
    I have also an issue that seems similar to one you are discussing.
    When we use ME59N and create a PO with ref. from a PR (created from a sales order), the message determination works well, it reads the condition set in MN04 (condition records for messages), and creates a message (with output type for EDI , medium: 6, and partner function LS: Logical system). Message is created and idoc is sent.
    When we try with ME21N, ME21 and we create the PO with ref. to the same PR, either by entering manually the PR in the document overview of ME21N or by selecting the PR (without entering the PR number), i.e with date, the message is not created in the PO.
    Company code is assigned to purchase organization, and so is purchase organization to plant.
    Any idea why there is no automatic message determination in the case of the transaction: ME21N
    Note: If I try ME21N, and enter the output type and partner, manually, I receive a warning message
    VN006 (Partner XXXX does not exist for partner function LS). If I accept this warning message, then message is saved- idoc is sent. However I can not overcome the warning message, if it plays any role, because I can not assign partner function LS to the vendor.Then I receive message CZ 327 (Can not use this partner role).
    Any input is wellcome.

  • Stored procedure not found when creating a new recordset binding in Dreamweaver CS6 with ColdFusion Server 11

    Stored procedure not found when creating a new recordset binding in Dreamweaver CS6 with ColdFusion Server 11.  I can see the tables and views in the database tab, but no stored procedures.  If I connect to a data source created in ColdFusion Server 6 I am able to see the stored procedures.

    Ben thanks for the reply!
    Yes that is the process I am following:
    In Dreamweaver, open the page that will run the stored procedure.
    In the Bindings panel (Window > Bindings), click the Plus button, and then select Stored Procedure.
    In the Data Source pop‑up menu, select a connection to the database containing the stored procedure
    Enter the ColdFusion Data Source user name and password.
    At this point in the procedure drop down I would get a message that said No Stored Procedure Found.
    Right now it appears to be working, I had to create a new site that pointed to the older CF 6 server's data source and create a page following the process above, then when I went back to the CF 11 site the stored procedures were now populated.  I need to make sure it is pulling from the correct server but right now it appears to be working.
    Thanks
    Dwight

  • Duplicate contacts when created from another application like Mail

    When adding a contact to Address Book from another application (from an email signature for example) two of the same contact are always created.  This does not happen when creating a contact from within Address Book.  Anyone have this problem and correct it?

    known bug, please send feedback to apple about your situation. http://www.apple.com/feedback/macosx.html
    Address book has a feature "look for duplicates" under Card in the menu bar. This will merge duplicate entries into on. But now I have some weird double names (but they're one contact/one card).

  • Serial number not valid when upgrading from LR4 to LR5 [was:leewayphotography]

    J’ai acheté LR 4 il y a 1 an avec le n° de série sur la boite. J’ai acheté l’upgrade pour LR 5 et je n’ai jamais pu installer la version définitive avec ce n° de série.Ce n° de série n'est pas valide. La durée version d’essai est terminée et donc je dois retourner à LR 4 pour continuer à travailler ? Pourquoi cela ne fonctionne pas?

    Bonjour.
    J'ai bien compris votre réponse qu'il fallait utiliser un nouveau n° de série. J'ai bien téléchargé LR5 le 18 mars 2014, j'ai bien reçu une facture
    n° IEE2014000174985 mais je n'ai pas de trace d'un nouveau n° de série. Il n'est pas sur la facture, ni dans le logiciel?
    Que faut-il faire
    Leewayphotography
    From: John Waller
    Sent: Monday, April 21, 2014 10:14 PM
    To: leewayphotography
    Subject: Serial number not valid when upgrading from LR4 to LR5 was:leewayphotography
          Re: Serial number not valid when upgrading from LR4 to LR5 was:leewayphotography
          created by John Waller in Photoshop Lightroom - View the full discussion

  • User statuses on notifications should carryover to order when created from

    Hi,
    I have requriement for user statuses on notifications (IW21/22) should carryover to order when created from notification automatically.
    Did anybody worked on this type of scenerios. I already found some userexit (QQMA0014) but i could not able to find any thing related to user status in VIQMEL view.
    At the time of creation of notification IW21, when i go for creation of order, User status of notification should copied to order automatically.
    Appreciate any help.
    Regards
    MM

    Thanks Anji for your response.Yes there is FM status_read which i can use to get Status but my problem is during creation of order from notification, i don't have notification number so i can't use any database tables to get status for later use. As per requirment, during creation of notification, I can go to order creation. at that time whatever user-status I choose at notifcation, same status should get copied to order. I hope it got clear to you now.
    Please suggest.
    Regards
    MM

  • TS3276 My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that  o2 account (offline) my mac I have no problem with my iPhone  or mac laptop. any suggestions please.

    My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that  o2 account (offline) my mac I have no problem with my iPhone  or mac laptop. any suggestions please.

    Sorry for the delay...
    I did what you've told me, new account and manually copied my files from Time Machine. I had lots of permissions problems, but at the end, almost everything is in order... It seems it had to be with some of the Apple Preferences, but I can't be sure, as most of them were dumped to the trash can.
    I still don't have my Mail Rules back, unfortunately, although I did goggled some. It is a pity, as I had around 30 or 40 of them, getting my mail in order to each of its mailboxes, but it is a small price as the rest doesn't show the before syntoms.
    Thanks for the help, anyway!!

  • Access 2010 on 64 Bit Windows 7 Access "Not Responding" when changing from forms view to design view and back

    I am running
    Windows 7 64 bit
    Access 2010 32 bit
    Developing an application with a split FE BE with both files local but continue to have the message "Not Responding" when switching from forms view to design view and back as well as if I try to connect to a subform or object on the sub form.

    I have seen this behavior when the form's RecordSource is a complex query such as a crosstab or a query with several nested queries. To test if this is your case, remove the RecordSource and see if the form starts acting normal again.
    Then again, if the form has several subforms they might be slowing up the loading time.
    Bill Mosca
    www.thatlldoit.com
    http://tech.groups.yahoo.com/group/MS_Access_Professionals

  • Change pointers are not generated when creating a material master

    Dear Experts,  
    Change pointers are not generated when creating a material master. 
    However, when a change is made to the already created material, the change pointers are created according the fields in BD52.  
    Am I missing any settings?
    I need to create change pointers immediately when I create the material master in MM01.  
    Please suggest. 
    Regards,
    Shetty

    did you follow the steps given in
    http://help.sap.com/saphelp_nw73/helpdata/en/4a/6dcbe9c95261a3e10000000a421937/frameset.htm

  • PSE 8 some photos will not autoimport when creating an photobook and block the whole sequence. Are there knows reasons why individual photos can hang the import? Thanks Michael

    When creating photobooks with PSE 8 I find occasionally that certain photos block the autoimport function and none of the sequence are loaded into the new photobook. Using the identical setting to create a photobook other sequences of photos work perfectly. The photos have been checked and found and all are connected and recognised. Are there knows issues with some photo formats which will not autoimport when creating a photobook?
    Thanks for the help.
    Michael

    Sometimes LR can be "nudged" into showing folder relationships which better match the file system, by using the "show parent folder" command. When existing folders appear as if they were "top level" in the drive, we can see a more or less virtual picture of the situation, rather than anything real. So newly added folders can sometimes present themselves as if independent of what is already there.
    By forcing LR to show a fuller hierarchy of folders, more attention gets paid to the actual arrangement - so new and existing folders should "wake up" and thereafter appear more reliably in the right relationships.

  • Can not edit new songs from songs list to playlist on i phone

    can not edit new songs from songs list to playlist i phone

    See also Recover your iTunes library from your iPod or iOS device.
    tt2

  • Create trigger not audited when run from sql developer Version 3.2.20.09

    Creating or editing a trigger is not being stored in the audit table when run from sql developer.
    Here is a sample script to show the issue:
    Grant Connect,create table,create trigger To testuser Identified By testuser;
    create table testuser.testtab(t1 number);
    Select Count(*) From Dba_Audit_Trail Where Owner='TESTUSER';
    CREATE OR REPLACE TRIGGER testuser.testtab_bi_trg BEFORE
      Insert
          ON testuser.testtab FOR EACH ROW
    begin
      null;
    end;
    Select Count(*) From Dba_Audit_Trail  Where Owner='TESTUSER';
    drop user testuser cascade;
    If I run the script from sql developer the CREATE TRIGGER statement does not get audited.
    If I run the script from sql plus or All Arround Automations PL/SQL Developer the CREATE TRIGGER statement does get audited.
    If I edit the trigger from sql developer the CREATE TRIGGER statement does not get audited.
    If I edit the trigger from  All Arround Automations PL/SQL Developer the CREATE TRIGGER statement does get audited.

    DoyleFreeman wrote:
    Not sure what you mean by "perform the audit".
    Have you tested my script? Does the "Select Count(*) From Dba_Audit_Trail  Where Owner='TESTUSER';" increment by 1 after each of the ddl statements or only after the Create table statement.
    Your question doesn't have ANYTHING to do with sql developer and should be posted in the Database General forum
    https://forums.oracle.com/community/developer/english/oracle_database/general_questions
    Yes - and it works just fine once you ENABLE AUDITING. Your scripIt  does NOT include the statements or code used to ENABLE auditing and, specifically, enable auditing for triggers.
    Auditing doesn't just 'happen'; you have to enable it and you have to specify any non-default auditing that you want to perform.
    Have you read any of the extensive documentation about auditing to learn how to use it?
    See the Database Security Guide
    http://docs.oracle.com/cd/E11882_01/network.112/e16543/auditing.htm
    Also see 'Auditing Functions, Procedures, Packages, and Triggers
    http://docs.oracle.com/cd/E11882_01/network.112/e16543/auditing.htm#BCGBEAGC
    And see the AUDIT statement in the SQL language doc for how to specify auditing of specific operations.
    http://docs.oracle.com/cd/E11882_01/server.112/e26088/statements_4007.htm
    Select count(*) From Dba_Audit_Trail  Where (Owner='SCOTT' or username = 'SCOTT')
    and action_name = 'CREATE TRIGGER';
    COUNT(*)
    0
    audit create trigger by scott
    CREATE OR REPLACE TRIGGER emp_copy_bi_trg BEFORE
      Insert
          ON emp_copy FOR EACH ROW
    begin
      null;
    end;
    Select count(*) From Dba_Audit_Trail  Where (Owner='SCOTT' or username = 'SCOTT')
    and action_name = 'CREATE TRIGGER';
    COUNT(*)
    1

  • Sale Order Item Quantity Not Populating When Create A Sale Order Using BAPI

    I am having a problem when creating a sale order using BAPI
    BAPI_SALESORDER_CREATEFROMDAT2
    Problem is that sale order item quantity field is not populating
    code is as follows
    ORDER_ITEMS_IN-ITM_NUMBER = '0010'.
    ORDER_ITEMS_IN-MATERIAL = '000000000010000262'.
    ORDER_ITEMS_IN-TARGET_QU = 'LB'.
    ORDER_ITEMS_IN-TARGET_QTY = 1.

    Hi,
    Try populating ORDER_SCHEDULES_IN table in the bapi field REQ_QTY.
    Regds,
    Rudra

  • VA01 copies texts, but VA02 does not when creating from reference

    Hello,
    I am having an issue with text determination configuration.  It is currently set up to copy some header texts from the quote to the order when an order is created from reference.  This works correctly when using transaction VA01 to create an order from reference.
    However, the issue arises when using VA02 to create from reference, the items copy over correctly from the quote, but texts and other data do not copy over correctly.  Any ideas on why this might be the case?
    Thanks,
    Tony

    Hi Everyone,
    Thanks for your replies.  I know the correct way to do this is to use VA01 and Create from reference.  However, the way that the order processing group has always done this is to create a "dummy" order using VA01, then use VA02 to "modify" the order by going to menu option Sales Document -> Create with Reference.  This has the effect of copying over all items from the quote into the order.  However, no sales texts are copied over when this is done.  I'm wondering if there is a config that needs to be modified to allow texts to copy over using this method.
    When I go into the texts tab in VA02 and display the log, the texts that I need copied over say something like, "Text does not exist".  I have a feeling that the text is not copied over because the order does not have a reference to the quote at the time the text determination is evaluated.
    Thanks,
    Tony

Maybe you are looking for