PO not getting created in the backend
Hi
I have made settings for R/3 PO to be created once a SC is approved, but I get the following errors in the "Application monitors>Shopping cart> backend application errors"
000Creation of PO using Enjoy BAPIunsuccessful
MEPO 085Check item number 0 in tabl
06 010Document contains no items
MEPO 071Item 00010 does not exist
Note: PR and reservations in R/3 are getting created as follow on docs for SC but onky PO creation is throwing these errors. PO is getting created if i manually try and create it in R/3, so i suppose theres nothing wrong with the data as well.
Regards,
Amol
Hi Sailatha,
I am new to this so can u pls tell me, how to check and rectify it step by step. Which are the transactions used and how to do the assignment.
Also what are the default message types to me maintained in the ALE customization. Currently i have the following messages maintained:
ACC_GOODS_MOVEMENT
ACLPAY
BBPCO
BBPIV
MBGMCR
Thanks & Regards,
Amol
Similar Messages
-
SRM PR is not getting created in ECC backend
Hello Experts,
We are running SRM 7.0 with SRM-MDM Catalog, we are using SRM for shopping. We do have PI 7.11 running in the Environment as well.
We are on ECC 6.0 with Ehp 4.0
Purchase Order:
However we can see the PO creating successfully using PI.
Question, in the SRM table (BBP_FUNCTION_MAP), we see the object type: BUS2012 for ERP 4.0 has adapter name: /SAPSRM/CL_SOA_ADPT_PO_CRT_ERP for when creating PO. Please see teh screen shot.
is this the reason that we need PI?
Purchase Requisition:
PR Creation is not working:
PR is not getting created in the ERP, PR uses Object type: BUS2105, Adpater CL_BBP_BS_ADAPTER_RQ_CRT_470 for ERP 4.0 System type, can you please tell me if the adapter is correct for ERP 4.0 system type?
I also have a question to ask:
1) Where did you see that PR/PO was send to PI System (PI1)? My understanding is that since ERP amd SRM are 2 ABAP Systems, why we cannot send the PR/PO directly to ERP system from SRM? Why do we need a middleware(PI) in between for this process? We should be able to USE BAPI function to do it correct?
Please advice.
Thanks
Kumaryes, i could see a PR number with all this additional details as below.
Table BBP_PDBEI
CLIENT 453 Client
GUID 4CAEFA58EB9D005CE1008000AC1C2031 Globally Unique identifier
BE_LOG_SYSTEM QA1400 Logical System of Logistics Backend
BE_OBJ_ITEM Follow-On Object Item in Back-End System
BE_OBJECT_TYPE BUS2105 Follow-On Document Object Type in Back-End System
BE_OBJECT_ID 2000000167 Follow-On Document Object ID in Back-End System
BE_REFOBJ_TYPE Reference Object Type in Back-End System
BE_REFOBJ Reference Object in Back-End System
BE_REFOBJ_ITEM Reference Object Item in Back-End System
BE_REFOBJ_SBITM Reference Object Sub-Position in Backend System
BE_REFOBJ_TYPE2 Reference Object Type in Back-End System
BE_REFOBJ2 Reference Object in Back-End System
BE_REFOBJ_ITEM2 Reference Object Item in Back-End System
BE_REFOBJ_FYEAR2 0000 Reference Document Object - Fiscal Year in Back-End System
BE_STGE_LOC Storage location
BE_PLANT 2016 Plant
BE_BATCH Batch Number
BE_VAL_TYPE Valuation type
BE_MOVE_REAS 0000 Reason for Movement
BE_EXPERYDATE 00000000 Shelf Life Expiration Date
BE_PUR_GROUP 206 Purchasing group
BE_PUR_ORG 2000 Purchasing organization
BE_CO_CODE 2000 Company Code
BE_DOC_TYPE CLRQ Purchase Requisition Document Type
BE_ACCREQUIRED Account Assignment for Logical Backend Required
BE_SP_STK_IND Key for Special Stock Section
BE_INFO_REC Number of purchasing info record
BE_MOVE_TYPE 201 Movement type (inventory management)
BE_PACKNO 0000000000 Package number
BE_INTROW 0000000000 Internal line number for limits
BE_ITEM_TEXT Short Text of a Service Purchase Order Item
BE_PO_PRICE 1 Price from Backend
BE_UNLOAD_PT 200 Unloading Point in Backend
BE_DEL_IND Deletion Indicator in Backend Documents
BE_TRACKING_NO Requirement Tracking Number
BE_COND_TYPE Condition Key
BE_COND_STEP 000 Level Number
BE_COND_COUNTER 00 Condition counter -
File not getting created at the Reciever
Hi All,
I have implemented a simeple file to file scenario. The file is getting deleted from the source directory but is not getting created in the target directory. It shows a checkered flag in SXMB_MONI . When i do Communication Channel monitoring for the reciever Comm. Channel, it shows no messsages .
I have refreshed the Cache in Integration directory. it is still not working.
I tried using a different Communication channel with the Mail adapter that is working fine.
I cant figure out what the problem is please help.
Many Thanks,
NehaHi! Neha,
Here i want to add some points :
Even I faced same problem in project....... then I followed this procedure...
My scenario is FILE TO RFC via FTP Server in file adapter.
Here issue is file is picking from FTP and showing success in MONI but data is not reaching to BW system..
Most of the times I checked and I did successfully.
Main issue are due to:::
1. Check Queues in Inbound queue SMq2
2. Trace teh step by step in message flow in message monitoring that means check whether message flows
from a) Intergration Engine
b) Adapter Engine..
3. Check and trace the flow in Message monitoring in Run Time work Bench
4. Check Status of Receiver communication Channel in Communication channel Monitoring
5) Check whether Business Services are Scheduled in Availability Time planning or not
6 Also Check in Visual admin whether the services are released or not if any others are might using the same servivcees and cahnnels and suppose if they are scheduled or not
7. Do Cache Refresh mainly SXI CACHE, ADAPTER ENGINE CACHE
8 Finally if still not resolved J2EE ENgine SOFT Restart..instead of doing restarting entire XIengine server.
Once the Server is started then defintely all the messages if suppose if 40 messages are picked from source directory and not reached to Target then all those definetely 100% become success and reached
Note:: All above needs to check only if development part is correctly configured.
Also check the Receiver target and sender directory Permissions in FTP Server i.e., rwx permissions okay
Thanks
Amar Srinivas Eli
Reward Points if useful -
Weblogic servers directory not getting created in the domain directory
Hi
I installed weblogic 12c(12.1.1.0) and then ran the config.sh to create the domain/managed servers directories.
After the config.sh completely ran I am not seeing the servers directory under the domain directory. All other directories like config, bin are present under the domains directory.
If anyone can let me know for weblogic-12c if they have come across such a issue during installation/configuration please reply to this thread.
Thanks
BharanBHi,
Weblogic servers directory do not gets created after domain creation or even managed server configuration. It will present itself only when you start the managed server for the first time, that is when it initializes all security attributes, diagnostic attributes (if configured) , etc..
Perform server start and then check if it gets created or not.
## rank answer if it is helpful ##
Thanks,
Ranjan -
SRM PR,PO is not getting created in ECC backend
HI
i create SC in classic scenario. and after the manager approve the SC the follow on Doc didnt create in ECC
i define object for po pr and reserve in backend
when i check FM :BBP_PD_SC_CHECK i havent any error message
but when i have chek the SC in RZ20 i have this error: Local Error: Shopping cart 0010000308: Error creating the follow-on document
and when i chek BBP_PD i have this status:
Stats:
Status Description Inactiv
HEADER I1015 Awaiting Approval X
HEADER I1021 Created
HEADER I1038 Complete
HEADER I1106 Shopping cart ordered
HEADER I1129 Approved
how to resolve this issue?
Regards
ElhamDear Elham,
To find the solution of the problem I think you need to debug.
Follow below steps if this help you
a) Run the report "FBGENDAT"
b) Input the data as below screen shot
c) Then go to se37 execute FM : BAPI_PO_CREATE1
d) You will find the test data directory and test data will be saved as below
e) In this test date change PO number you should get the error which you are getting above.
Thanks
Ankit Jain -
File not getting created in a different server
My requirement.
I have written a code in the BI system and now need to write an empty file (say a.done)in a directory /interfaces of PI system.
I wrote using open data set and close data set however the file (a.done) is not getting created in the PI system even though the directory /interfaces exist.
When I give any directory of that of BI system ,the file(a.done) is getting created i.e the file is getting created on the same server and not on the different server.
Is there any function module or any other way for the file to get generated in the PI system.
Please explain with an example.
Regards,
VishTry to use search FTP in se37 or checkout the below FM
CALL FUNCTION 'EPS_FTP_MPUT'
EXPORTING
RFC_DESTINATION =
* FILE_MASK = ' '
* LOCAL_DIRECTORY = ' '
* REMOTE_DIRECTORY = ' '
* OVERWRITE_MODE = ' '
* TEXT_MODE = ' '
* TRANSMISSION_MONITOR = 'X'
* RECORDS_PER_TRANSFER = 10
* MONITOR_TITLE =
* MONITOR_TEXT1 =
* MONITOR_TEXT2 =
* PROGRESS_TEXT =
* IMPORTING
* LOCAL_DIRECTORY =
* REMOTE_DIRECTORY =
* LOCAL_SYSTEM_INFO =
* REMOTE_SYSTEM_INFO =
* TABLES
* FILE_LIST =
* EXCEPTIONS
* CONNECTION_FAILED = 1
* INVALID_VERSION = 2
* INVALID_ARGUMENTS = 3
* GET_DIR_LIST_FAILED = 4
* FILE_TRANSFER_FAILED = 5
* STOPPED_BY_USER = 6
* OTHERS = 7
IF SY-SUBRC <> 0.
* Implement suitable error handling here
ENDIF. -
Weblogic Domain not getting created in SOA Suite 11g R2
I have installed the components of SOA Suite 11g R2 (11.1.1.3) on a single Windows XP SP3 machine (32 bit) following recommended procedures. I tried to configure Weblogic server using Domain Configuration utility. After navigating hrough the wizard, no Weblogic server profile is getting created in the doamin folder. Even the WL Admin server is not getting created. The Domain Configuration utility did not throw any errors.
1) Is this problem related to Oracle repository for SOA suite 11g?
2) Can the repository schemas (Oracle) hold multiple weblogic SOA domain information?Hi,
Weblogic servers directory do not gets created after domain creation or even managed server configuration. It will present itself only when you start the managed server for the first time, that is when it initializes all security attributes, diagnostic attributes (if configured) , etc..
Perform server start and then check if it gets created or not.
## rank answer if it is helpful ##
Thanks,
Ranjan -
Hi All,
We are trying a IDOC-File scenario & trying to create a XML file on the receiver side........All the mappings have been checked & everything is working fine.It shows success in SXMB_MONI. But the file is not getting created at the target directory..... Checked the component Monitoring and message monitoring as well, which is also successful...
What could be the reason of such behaviour, and is there a way to track the where the target file is getting placed?
Please Help
Regards,
Jayashri>
Jayashri Rade wrote:
> Hi All,
> We are trying a IDOC-File scenario & trying to create a XML file on the receiver side........All the mappings have been checked & everything is working fine.It shows success in SXMB_MONI. But the file is not getting created at the target directory..... Checked the component Monitoring and message monitoring as well, which is also successful...
i
Did you check the receiver communication channel in communication channel monitoring?
Are there any errors? -
Sub node is not getting created
Hi Experts
I have IDOC to SOAP scenario, here the subnode is not getting created in the main node. please help me
Structure is given below
Source
Matmas
IDOC
e1m -
(1...9999 ) occurance
Target
Target
XMLDATA --- (1.. UNBOUNDED)
SUBNODE1 ---(1.1)
SUBNODE2 ---(1.) -- UNDER SUBNODE1
SUBNODE3----(0...UNBOUNDED) -- UNDER SUBNODE1.
Quesion 1.
now i want XMLDATA node to be repeated as many times as e1m comes from source along with both the subnodes 2 and 3 at target side.
but i could see only subnode2 is getting created not the subnode3 while testing.
May i know why is this happening.
I want the SUBNODE3 also be created.
Note the occurance of SUBNODE3 is 0.. unbounded
Question 2:
I want the SUBNODE3 also to be repeated as many times as e1m node comes from source.
For example:
e1m comes twice then the target should be as below
XMLDATA --- (1.. UNBOUNDED)
SUBNODE1 ---(1.1)
SUBNODE2 ---(1.) -- UNDER SUBNODE1
SUBNODE3----(0...UNBOUNDED) -- UNDER SUBNODE1.
SUBNODE3----(0...UNBOUNDED) -- UNDER SUBNODE1.
XMLDATA --- (1.. UNBOUNDED)
SUBNODE1 ---(1.1)
SUBNODE2 ---(1.) -- UNDER SUBNODE1
SUBNODE3----(0...UNBOUNDED) -- UNDER SUBNODE1.
SUBNODE3----(0...UNBOUNDED) -- UNDER SUBNODE1.
Regards
LaraPlease see the below logic:
E1MARAM --> XMLNODE
E1MARAM --> useOneAsMany_customUDF -->SUBNODE3
E1MARAM/MATNR --> useOneAsMany_customUDF --> SUBNODE3/MATNR
E1MARAM/xyzfield --> useOneAsMany_customUDF --> SUBNODE3/xyzfield
Source:
<?xml version="1.0" encoding="UTF-8"?>
<MATMAS05>
<IDOC>
<E1MARAM>
<MATNR>123</MATNR>
</E1MARAM>
<E1MARAM>
<MATNR>1234</MATNR>
</E1MARAM>
</IDOC>
</MATMAS05>
Target
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_Test xmlns:ns0="urn:test-2:test:area">
<XMLDATA>
<SUBNODE1>
<SUBNODE2/>
<SUBNODE3>
<MATNR>123</MATNR>
</SUBNODE3>
<SUBNODE3>
<MATNR>1234</MATNR>
</SUBNODE3>
</SUBNODE1>
</XMLDATA>
<XMLDATA>
<SUBNODE1>
<SUBNODE2/>
<SUBNODE3>
<MATNR>123</MATNR>
</SUBNODE3>
<SUBNODE3>
<MATNR>1234</MATNR>
</SUBNODE3>
</SUBNODE1>
</XMLDATA>
</ns0:MT_Test>
useOneAsMany_customUDF
for(int i =0;i<var1.length;i++)
for(int j=0;j<var1.length;j++)
result.addValue(var1[j]);
result.addContextChange();
Hope it helps! -
Extension folder is not getting created for firefox 4 in Mac OS
in Mac OS 10.6, 10.5, extension folder is not getting created in the profile for the firefox 4.0. Where as in Firefox 3.6 when you launch the firefox first time, profile folder is created and extension folder is also part of that.
That extensions folder will only be created if there are extensions found that need to be installed. If there are no extensions then Firefox doesn't create an empty extensions folder.<br />
On Windows there is a lot of security software that installs extensions globally.
* https://developer.mozilla.org/en/Installing_extensions
* https://developer.mozilla.org/En/Developer_Guide/Customizing_Firefox
* https://developer.mozilla.org/en/Adding_Extensions_using_the_Windows_Registry -
Inbound Activity not getting created with Campaign Response
Dear Experts,
I am working in a scenario where we are using Campaign Automation for sending Email Survey to business partners.
Mails are reaching the BPs, survey response also coming to the survey tables, But the Inbound activity is not getting created in the system.
I am using standard Transaction type ''0000'' for inbound activity. . which is ''Appointment'' and Category type ''Date'', direction ''inbound''
The Action profile for this activity is Campaign_Automation_Activity. . .
I have done questionnaire determination is customizing too.. .
Am I missing a something??
Some linking of this Activity with Campaign element?
Please suggest!!Hello Naresh,
Thanks for the reply, but can u explain me in details.
1. I am using the MKTCA PBO n PAI,
2.I have checked the BAdI CRM_SVY_MKTCA_PAI and checked the Transaction type ''0000'' hardcoded, so using the same Transaction type, the Category is hrdcoded as ''002''
3. Transaction type ''0000'' is active.
Please suggest? -
War not getting created jdeveoper 10 g latest release
hi,
I had created a new deployment profile for my application names testwar , but the war is not getting created in the folder deploy nor there is any folder named deploy in my application workspace directory.
Can anyone help me or give me a link which will help me create a war file , is it necessary to select the platform also on the option provided while make theHi,
create the deployment profile and use the context menu to create the war file. That is how it works.
Frank -
PO not created in the backend for SC
Hi,
I am using SRM 5.0 and i created a shopping cart.. The shopping cart is ordered sccessflly but a PO is not created in the backend system.
I have made the follwing setting.
The backend system definition seems fine.
I have also defined the prodct category and the target system.
Number ranges are assigned in the SRM system.
I checked rz20 and did not find any errors there..
Shold i created a docment type EC in the backend MM system??
What else could i be missing. Please advise.Hi,
You could check the return of FM B31I_INTERPRETE_DATA, which is called when a follow-on document is created in backend system.
Try to debug the shopping cart transfer, as specified in note 1173815. Perhaps the backend return message can be helpful.
Kind regards,
Ricardo -
STO and delivery is getting created in the foreground instead of background
Hi experts,
In return document (with reference to Work Order), When user is selecting recommended action u2018YAu2019 and clicking the u2018returnu2019 button, an STO and delivery is getting created in the foreground instead of generating them in background.
T-code - o3o_RT02
Test case
Create Work Order (IW31)
Create return document w.r.t Work Order (o3o_RT01)
Select recommended action u2018YAu2019, save and select u2018returnu2019 button.Hi,
Could you checkthe foll cust link in SPRO:
Define Objects in Backend System (Purch. Reqs, Reservations, Purch. Orders).
PO is created if you set the "*" for EITHER the purchasing group OR the product category.
SRM is creating PR or PO depending on:
- SRM customizing (ex: always external proc + PR if incomplete, PO if complete)
- the interpretation of SC data by R/3.
IF your SC is considered complete by SRM (but with a fixed vendor and not a preferred vendor) the system will check if it can create a PO in R/3.
For this, each item will request a META_INTERPRETE_DATA to R/3, asking if it can create a PO. If R/3 considers this data as incomplete, it will reply to create a PR.
Usual cases of R/3 PR creation instead of PO:
- prefered vendor in SRM (and not a fixed one)
- custom checks in user exits in R/3
- error messages in R/3 (ex: O6 334 In the case of a fixed vendor, please enter info record)
To debug without debuging into R/3, you can also try the following:
- use BADI DETERMINE_TARGET_OBJECT and force PO creation
- so the system will always try to create a PO
- R/3 won't create the PO (for the same reason as in META_INTERPRETE_DATA), and will raise an error in SRM
- finally you get the real error in application monitor (SC --> backend application errors
Related thread:
Re: PO not create from SC with source of supply in classic sena
BR,
Disha.
<b>Pls reward points for useful answers.</b> -
WBS Elements not getting created in ECC Project System from CRM 7.0
Dear all,
We are trying to integrate SAP CRM 7.0 with SAP ECC-PS module. The objective is to bring in the marketing plan and elements data from the CRM system, and to create the corresponding WBS in project system. We have done most of the configuration as recommended by SAP in both the systems, and we see that the BDOCS are getting generated and sent to the ECC system. The following steps have been successfully completed:
1. Set up the RFC connections between the two systems
2. Selected the connection type as Middleware in CRM system.
3. Installed the cProject Add on in CRM box.
4. Created a project scenario (with project and network profiles) in the PS system and assigned the same in the CRM system.
5. The Project Scenario in PS config has the same name as the Project Type in CRM config.
6. Created and released the campaign ids being created in the CRM system.
As already mentioned, we can see that the BDOCS are coming to the ECC system and are getting stored in BDOC_TRACK table. However the issue is that the corresponding WBS elements are not getting generated in the ECC system. Is there anything that that we are missing in the ECC box which would trigger the WBS element creation?
Request you all to share your inputs which would be immensely beneficial for us in achieving this integration.
Thanks and Kind Regards,
Aditya ShrivastavaHello Aditya,
We too are facing this issue.. if you have resolved the issue could you please let us know the solution ?
Some inputs related to our system,
We have upgrade from CRM 4.0 to CRM 7.0 SP07 and R/3 backend system is on 4.7 SP27, earlier we have completed the upgrade on sandbox without any issues which was upgrade to CRM 7.0 SP04 but with SP07 we are facing the problem of WBS Element not getting created in R/3.
Your help is highly appreciated.
Thanks & Regards,
Sumukh Kapoor.
Maybe you are looking for
-
SharePont 2013 Document Library lookup Column Properties not Showing Correctly when editing in Word
Hi I keep seeing this issue albeit intermittently. I have set up a doc library for my users which has a custom content type (lookup, metadata columns, etc) . They all appear perfectly most of the time except the lookup column. Sometimes is just dec
-
Configuring TLS support in a clustered environment
Hi folks ! I couldn't find a definitive guide to TLS support in a clustered environment... So I'll give it a shout :) Has anyone managed to configure TLS support in his/her cluster ? My setup is as follows : - we have two Ironports, clustered, who ar
-
Another question...how do i test an alphabetical input?
When a user enters letters instead of numbers the program should output a message saying "You can't type a letter". This is not working. Anybody know what i might of done wrong in my code? if (amount < 0) { t
-
User IP Address in ADC (Activity Data Collector)
Hi all, I would like to use Activity Data Collector. First previews of the generated logs looks fine but I miss the logged User IP Address. Does someone know how to get the IP Address? Maybe I missed a parameter, so please tell me which parameter log
-
when i use a Vector as the model of a JComboBox, the drop list doesn't refresh properly. in my program, i add a few element to the vector and open the drop list, and it's fine. but after i remove the items from the vector and add more back, the last