PO not picking up the Price from Info Record ???

Hi,
Pricing Procedure and the Schema Grp is defined in Schema Determination in SPRO.
Schema Grp has been assigned in the Vendor Master.
Price has been maintained in the PB00 condition type in the Condition Supplements screen, but shows 'Zero' in the 'Purchasing Org. Data 1' screen of Info Record.
However, while creating PO the system does not pick up the Price from the Info Record and both the Condition Types PB00 and PBXX appears and display the Amount as 0.00 ? Also the system does not take the value entered in the 'Net Price' field and the Price can only be entered manually in the Conditon Type in the Conditions Tab ?
Can anyone help in resolving this issue ?
Lucky.

Hi Lucky
1.Routine 6
This is an example of a pricing requirement. This requirement is met if the condition exclusion indicator is not equal to 'X'. <b>This requirement can be assigned to a condition type in the pricing procedure to ensure that it is not accessed when a condition record with exclusion indicator 'X' has already been found</b>. Condition exclusion is a general tool that can be used to exclude conditions from pricing based on previous conditions that have been found in the pricing procedure. This requirement is intended for use in MM pricing versus SD pricing. For SD pricing, a variation of requirement '2' should be used which would also check to see if the item category is relevant for pricing
2. You have define all your supplementory condition in supplementory pricing procedure and you have to assign this supplementory procedure to your Condition type PB00.Then all these conditions will be displayed at item level for selection in drop down.
Since the supplementory conditions are dependent on PB00, you have assign to the PB00.
If you maintain the values for these conditions in info record, these values will be copied from info to PO.
Regards
Ramakrishna

Similar Messages

Bring to the PR the price from Info-Record

Hello experts,
If I am working with info-records that are created automatically when doing the PO with the price of last PO, I would like to bring this price to the PR when doing for the same material and vendor. Is it possible? I only get the price from the info-record in the PO but not in the PR.
Thanks in advance,
Best regards,

Hi,
PLease read the SAP note 311174:
Symptom
You create a purchase requisition and go onto the initial screen of
source determination. Although the system determines a source of supply,
no data is copied from the source of supply. In particular the price is
not used from the outline agreement or the info record. For purchase
requisitions with account assignment the account assignment is also not
copied from the outline agreement.
The same applies for Transaction 'Create Purchase order' (ME25) with
unknown vendor.
Cause and prerequisites
The transfer of data from the source of supply is not planned and only
makes sense in some cases. In particular when you change the source of
supply later the copied data must be changed again. However, at this
time it is no longer clear whether the data was copied from the source
of supply or was entered manually.
Solution
Currently and in the near future there will be no solution.
Best Regards,
Arminda Jack

Purchase Order is not Picking Price from Info Record.

Dear All,
User had created a Shopping cart in and an automatic Purchase Order is created which is picking the material price from Purchase Requisition but not from Created Inforecord. As checked in P.R at item level it is found that in VALUATION tab there is a field named as " P.O PRICE " , here defalt t selected as " 1 A Gross Price "., Can u please help that from where this field is automatically selected as Gross Price in Purchase requisition.
Thanx n Rgds,
sap11

This is the config done in the OMET transaction where you will see the Adopt PO price field is checked and now this funcitonal authorization code e.g. 01 assgined to user profile in SU3 transaction agianst the parameter EFB.
if this is active than it will not take price from info record but it will copy from PR.
to avoid this kind of issue -
Remove the EFB value in SU3 for particular user or if user needs to have the EFB profile for some other requirements than go to OMET and remove Adopt po price indicator from that profile which is assigned to user

JDBC sender channel running but not picking up the data from sp

Hi,
One of the jdbc sender channels in production is running at its schedule time but it is not picking up the data from the sql side, we have checked with the sp side and they are saying that sp is running fine. No changes have been done in its configuration. Last message coming in RWB is Retry interval started but that is of 1 day and its already been 3 days. I tried by starting and stopping the channel but of no use. The channel was re activated but that also didn't help.
Please help, what can be the reason for the same.
thanks.

Hi,
The JDBCadapter ( The respective channel) is definitely locked in PI . Ideally for each polling interval a lock is being created and once the processing is over , the lock should be released/deleted automatically to allow further polling interval. If the lock is not released by the system automatically,further polling will not happen as expected. ( This may affect all sender JDBC adapters as well. I would recommend to do a check in all sender JDBC communication channels)
You can see/delete the locks in Visual admin.
Go to Server>Services->Locking adapter and click refresh
The entries for JDBC adapter ( with name $XIDBAD.JDBC2XI) should be deleted by selecting those particilar entries and click delete selected locks.
If you have more than one node, then same should be done in all server nodes.
The temprory solution would be creating/copy the existing channel in ID with same properties and assign it into particular sender agreement.
But, the lock may be created again which potentailly stops all your database interfaces. Hence i would suggest to use Disconnect From Database After processing of Each messages in Advanced tab in the sender JDBC adapter.
Hope this solves your issue.
PS: The same bahaviour would expected for all file adapter as well

PO Price from Info Record

Hi Experts,
We want that in one order type of purchase order PO should be made from Info Record Price. Suppose info record price is Rs 5. Nobody should be able to make po in price 4.90 or 5.10.
Please help me to achive the same.
Regards
GR

Hi,
Check the setting :
Spro-MM-Purchasing - Purchase order- DEfine screen layout at document level. Here you select the required field selection like NBF and double click on the items and make price in display mode so that in PO net price can not be changed at item level.
Select the condition type PB00 ( price from info record) and( path :: spro-conditions - price determination process - define condition type ) and go to Changes which can be made tab and select Manual entries and set " D" Not possible to process manually. Here at the condition level, price can not be altered.
Check it out.
REgards
Ram

Deactivate default PO price from Info Record

Dear all,
Would someone enlighten me how to deactivate PO price from Info Record.
PO condition is setup as not control at plant level.
Regards,
Peck Har

Hi
use
MEMASSIN - Mass Maintenance
here u can delete info record also
Vishal...

CK11n Costing Run does not pull purchasing price from info record.

Hi,
I have material which is a semi finished product (Material type: SEMI) and is purchased from a fixed vendor (specified in the source list).
The costing run does not pick up the purchasing price from the purchasing info record but
instead incorrectly picks up the standard price from the material master (Costing 2 view).
Can you please help me solve this issue?
Thanks,
Ketan

Execute OPL1
or
SPRo>>IMG>>Controlling>>Product Cost Controlling>>Cost Object Controlling>>Product Cost by Order>>manufacturing Order>>Check Costing Variants for Manufacturing Orders (PP)
Select the costing variant in the table from "Change Costing Variant: Overview" Overview Screen
Click Detail Button
Click Valuation Variant Button in the Control Tab
Change View Valaution Variant Detail Screen Appears
In Material Valuation Tab Set Price from Purchase Inforecord as Priority 1 if you want to use Price from Purchase Inforecord for semi-finished product during CK11N
You can list down Priority 2 to 5 depending on your requirement
This would solve your problem
Edited by: Paul Pandian on Mar 17, 2009 3:01 AM

Price from Info record

Hi
I maintained the vendor/material info record but when I created the PO the material price is not populated from info record? your advice please.

hi,
You can check price for material or condition PB00 in me12/me13
Also to get price from Inforecord you need to do some setting in Condition Type
Goto V/06, select condition type and in Changes can be made area, in manual entries tab select
B Automatic entry has priority
OR
D Not possible to process manually
Regards
Vishal

PR from project Price - from Info Record

Dear All,
When we create a PR from project- against the network, the price needs to pick from info record. But now its picking from the MMR. How can i achieve it ? I did few changes like changing the priority in cost variant. But still its picking the price from the MMR only. Can anybody help me to resolve the issue ?
regds,
CB

Try with user exit EXIT_SAPLMEREQ_005

Custom Manage Property does not pick up the value from mapping crawl property

Hi All,
I have created a custom list with the column name that's called "category".
Then I ran full crawl and I saw the "ows_category" crawl property is created.
Then I create the manage property names as "Category" and map with the "ows_category" and run the full crawl again. (Retrivable, Searchable, Refinable options are checked)
After full crawl, I searched Category:keyword but it returned 0 result.
But when I search keyword, that list item is retuned
I tried to debug with the spsearch2013 tool and there is no "Category" manage property in the return XML.
It seems the Manage Property does not pick up value from the crawl property. (Something might be wrong with the index schema)
Do you have any suggestion?
Do I need to reset the index?
Best Regards,
Andy

Hi Andy,
When you search ‘category’ in crawled properties(Central Administration->Search Service Application->Search Schema), you will see ows_Category is mapped to DiscussionCategory, like the screenshot:
So, I suggest you create a new column using another name, then test again, compare the result.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Production issue - Sender File adapter not picking up the files from folder

Hi Guys,
Ever since the upgrade from XI 3.0 to PI 7.1, we have come acrossinstances of weird error.
Thsi time again - now the 3rd time - tandom basis, in our production PI server, we have teh file slying in the source directory folder in the server.
I can see the files lying there in AL11.
However, it looks like that the file polling has just stopped and the channel is going blank in channel monitoring.
I have checked in SXMB_MONI and there are no messages since the morning.
I have tried craeting a replica of the current channel but it is not working.
This is teh production server and thsi has alraedy created production issues.
I ahve checked in the SDN forum but am not able to find the details.
Plaese help me.
I am anyway going to raise the issue with SAP now.
Regards,
Archana
<REMOVED BY MODERATOR>
Edited by: Prateek Raj Srivastava on Jun 8, 2010 4:50 PM

Hi Prateek,
I have trying all sorts since the morning and then just checked teh file permissions.
The file permissions were incorrect as compared ot the other files that were processed successfully today.
Somehow the permissions were changed on the server and the interface channel was not able to poll the files.
I got teh permissions changed back to 666 and all the files were pikced up in a minute.
I got the folder checked and it seems like that the permissions were changed somewhere very early in the morning and we are trying to find out how it happened and who did that.
However, another question i had - this sender file adapter was polling the source directory and deleting the files from there.
I would have expected that if the channel had issues with the file permission because of which it was not able to access the file, it would have thrown an error something like the file permissions error.
But there was not a single error in the channel monitoring.
How can we configure it in a beter way so that we at least soem kind of error indication?
Please advice.
Regards,
Archana

PO retrieve old price from info record

Hi Experts,
I have maintain 2 pricing condition in info record with different validity date.
Why PO still retrieve price which is validity date was expire instead of the valid pricing?
Thank you.

Hi,
Yes. Normally the price will be picked from inforecord if it exits with conditions with valid date, otherwise the price will be picked from the Last PO .
regards,
abi

Disable adopting price from Info record

Dear Experts,
While creating the PO i don't want the price to be adopted from the Info record ..
I want to disable this function
Thanks in advanced

Hi
Its very easy dear....just remove the access sequense from the basic price condition u are using in ur schema, Basically what i understand is u might be using the SAP standard basic price condition (PB00 / PBXX) these conditions are by default having access sequence assigned. Either just remove these access seq. or create another condition type a copy of the existing one but just remove access seq. and assign this condition type in ur calculation schema in place of present baseic price condition.
In SAP standard conditions there is already one condition type of Gross price for manual price (means without access seq.) u can use that also.
Hope this solves ur problem
Regards
Vineet Baweja

Price in Goods Receipt is picked from Info Record

Hi All,
I have created an Info Record with 2 validity periods:
01/09/2007 to 31/11/2010 = Rs.100
01/12/2010 to 31/12/9999 = Rs. 110
While creating the scheduling agreement, I have changed the price from 110 to 120.
While posting the goods receipt, system is calling the value from info record.
I have created the delivery schedule & goods receipt after 01/12/2010.
As per my understanding the system should pick the price from Scheduling Agreement not from Info Record.
Please help me in this.
Regards,
Ritesh

Hi Saurav,
Its maintained as 5 - GR date
I have tried to change it in info record but its still 5.
Regards,
Ritesh

Unable to pick up the file from Receive Location

BizTalk is unable to pick up the files from receive location.
My admin console is working so slow.
It is showing the problem of snap-in as follows:
I have checked all my receive location and its masking,it is working fine.
Actually it is working fine in dev server(snap-in problem is not occuring in dev server ) but when I import MSI and binding in UAT server.
It is not picking up the file from receive location.
I want to know one more thing :if my message box database is not working fine,will it receive the files from receive location.
Prakash

For files not received by receive location. If the Receive Location is still enabled but files are not processed by Receive Location, then check whether the host instance configured with your receive location is running. If the host instance is in
running state, restart the host instance and try.
Regarding the error in the admin console as shown in the image, people started to see this issue with admin console from BizTalk 2009 onwards. This happens in cases like you have done some activity with console and before its been refreshed it you do more
activities like expanding the node you will see this error. Sometimes WMI is bit slowly to refresh your admin console screen. Just wait for few seconds untill the WMI screen is rendered completely. Ensure you have all the cumulative updates installed for your
version of BizTalk and also ensure the service pack for your OS is updated.
Obviously if message box is not working, files will not be received/processed. But if message box is not in healthy state this would affect all other application not just one and in-fact it would affect entire BizTalk not just Receive Locations.
To start analysing this file not been processed by Receive Location, start with checking the host instance as mentioned.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

PO not picking up the Price from Info Record ???

Similar Messages

Maybe you are looking for