PO not updated in ICH due to ODM update error

Hi Experts,
I have an issue while sending the PO from R/3 to SNC. Below error has occured and not able to understand what exactly this error. I have checked the PO data and everything is correct in R/3.
"ODM: update errors, database"
Could you please help me to resolve the issue as many PO's are blocked due to above error.
Regards
Gowri

Hi Gowri
Most of the cases, this could be a temporary issue...Please try after sometime...if the issue still persists
Check notes  1178483/1019289/759877/836457 according to your SNC release and check the ODM customizing
If the issue is still not solved, please report to SAP, sometimes database entries are corrupted.
Regards
Vinod

Similar Messages

  • Problem with FX (CS6) "Could not complete your request due to a program error."

    This only happened after I got the master collection. FX effects in Photoshop CS6 do not work, at all. Attempting to use any of them result in the above quoted "Could not complete your request due to a program error."
    I've trashed the prefs, uninstalled/reinstalled, updated drivers, REFORMATTED MY HARD DRIVE, contacted customer support, and about every other troubleshoot short of sacraficing a goat. No cigar.
    Error log gives me the following:
    " ..\..\sources\UPattern.cpp : 1670 : REQUIRE failed"
    Same error, every time.
    Windows 7, 64x
    16gb DDR3
    AMD FX(tm)-4100 Quad-Core Processor [3.61 GHz]
    AMD Radeon HD 7800 Series
    Not running this 'Suitcase' thing. At a complete loss.

    Removing the whole folder worked, which, is good enough for me. I think what happened was a finaggle with the install, as I already had PS installed when I overlayed the master collection on top of it, still doesn't explain it not working after the reformat, might have been linked to my backup/scratch disk in some fashion and broke it. I'm not quite sure how the problem persisted.
    Don't install ps over ps, I guess ^^
    Aha, it was Prefs.
    Thank you! Greatly, been sitting on this problem for months now, no ammount of Googling would help. I can finally go back to work (that I've been sitting on this whole time).

  • HT201210 During the restore I get almost at the end the message that iTunes could not restore my iPhone due to an unknown error (1). Can someone help?

    During the restore from iTunes I get, almost at the end of the restore, the message that iTunes could not restore my iPhone due to an unknown error (1). Can someone help?

    error 1 means hardware failure.
    Is your phone jailbroken?

  • HT201413 my iPad will not update error 9 keeps coming up

    My Ipad will not update, error 9

    Hello Nicky Mifsud,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/ts3694#9
    Configure your security software
    Related errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.
    Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore.
    Have a nice day,
    Mario

  • Could not complete your request due to a program error...

    When I am saving a jpeg image I keep getting 'could not complete your request due to a programme error' if i save as, or close and save, or just press save. Please could some one help me solve this! As i have no clue how to!
    many thanks.

    Did you create the file? You can try to save it as PSD file, and then share it with us. Maybe we can find what is wrong with it.

  • PS 6 is not updating: error message U44M1P7 Also have CC installed.

    When I click on "more details" my finder opens like I'm supposed to choose a file and it's all gibberish to me.
    Anyone encounter this and have a solution?

    PS 6 is not updating: error message U44M1P7 Also have CC installed.
    ISSUE: Installation failed. Error Code: U44M1P7, U44M2P7, U44M1P6
    SOLUTION: Run the installer. Reinstall Photoshop CS6 to repair/replace the missing/modified file. Select Help>Updates… to run the updater again. http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html

  • Fiori leave request error "Could not start the app due to an internal error"

    Hi,
    I'm getting this error "Could not start the app due to an internal error" when accessing leave request application.
    I don't get this error when I login and launch the app for the first time. when I go back to the home screen and select "My Leave Requests" app again, I get this error.
    If I close the error message and do a browser refresh, everything is fine again for the first time, if I access the LR app again- same error .
    Other apps are working fine.
    I don't see any error in gateway or App logs.
    below is the Request URI
    /sap/opu/odata/UI2/INTEROP/ResolveLink?linkId=%27LeaveRequest-createLeaveRequest%27&shellType=%27FLP%27&formFactor=%27desktop%27
    Service call info
    Anyone with similar issue? any SAP notes?
    we are on
    UI2_731        100    0009    SAPK-10009INUI2731        SAP UI2 IMPL. FOR NW 7.31
    UI2_FND        100    0009    SAPK-10009INUI2FND        SAP UI2 FOUNDATION
    UI2_SRVC    100    0009    SAPK-10009INUI2SRVC        SAP UI INTEGRATION SERVICES
    UI5_731        100    0009    SAPK-10009INUI5731        SAP UI5 TEAM PROVIDER ON 731
    UISAPUI5    100    0009    SAPK-10009INUISAPUI5    SAP UI5
    UI_INFRA    100    0009    SAPK-10009INUIINFRA        SAP UI INTEGRATION INFRASTRUCTURE
    UIX01HCM    100    0003    SAPK-10003INUIX01HCM    UI for HCM Application
    Tags edited by: Michael Appleby

    Hi Masa,
    We have required SAP notes now, we are on version 1.22.5.
    It is still the same, working the first time I access the App, but subsequent access wont work until i refresh browser.
    I've include the response and lpd/tile screens.
    Thanks,
    Phani

  • Can not update -'Error -36' I REMOVED Music folder FROM IPod!!!!!!

    Hello!
    I accidentely removed whole folder (directory for music) from iPod several days ago.
    As a result my ipod is just empty- no music inside and I can not update that- because iTunes can't find the way.
    It says : ' unknown error -36 '
    Please tell me how I can resolve the issue?
      Windows XP  
    pc   Windows XP  

    Hi zen-an
    Welcome to Apple Discussions
    Does this link help?
    -36 or "Disk cannot be read from or written to" error syncing iPod in iTunes
    Regards,
    Colin R.

  • Itunes will not update error

      My existing itunes software will not update to current version. It stops half way through Install. I just get an Error window. It says try downloading manually via 'Tools' but I can't find 'Tools' anywhere?

    I assume they mean tools in Apple Software update, it is on the menu bar. You can select download only which saves the components on your PC.
    Or you can simply;y download the installer direct from Apple
    http://www.apple.com/itunes/download/

  • Apple software not updating - Error message

    iMac locked up (white screen of death) so restarted.
    When it restarted it will no longer update apple applications through the App Store.  Downloads and then starts to instal and comes up with an error message.   (iTunes, iMovie so far) 
    Non Apple programs still seem to update and/or instal.
    Applications still run but not update to new versions.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Select
              /var/log ▹ install.log 
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen. The contents of the log will appear on the right. Each log message begins with a timestamp. Select the messages from the time of the last installation or update attempt. If you're not sure when that was, click the Clear Display button in the toolbar of the Console window and then try the installation again. Select the new messages that appear. Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    ☞ If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    ☞ When posting a log extract, be selective. Don't post more than is requested.
    ☞ Please don't indiscriminately dump thousands of lines from the log into this discussion.
    ☞ Please don't post screenshots of log messages—post the text.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting. You may need to use a text editor with search and replace, such as TextEdit.

  • PreludeCC and PRemiere Pro CC will not update  error: " log Transport 2"

    PreludeCC and PRemiere Pro CC will not update . update gets to 62% and then quits with the following error code "Log Transport 2"
    System
    OS 10.9
    MacPro 3,1
    All other apps do update.

    HI Steve & Perry,
    Have you tried restarting the machine and applying the updates again ? If yes, are you still getting the same error message ? If yes , could you please share a screen shot of the error that you get ?
    Cheers,
    Kartikay Sharma

  • HT4623 phone will not update error code1015

    I am currently having problems with my I phone
    it will not update and has frozen on the itunes logo
    Thanks in advance for any help

    1015 error: There are 4 possible causes of this error:
    The activation server truly is unavailable. Rare, usually fixed within minutes.
    Your antivirus or firewall or router's firewall is blocking access to
    gs.apple.com on ports 80 and 443.
    Your iPhone is jailbroken or otherwise hacked.
    The computer you connected to during the restore/update was
    used to hack/jailbreak some other iOS device, and its
    network database was corrupted during the process.
    (Thanks to Lawrence Finch for the wording in
    https://discussions,apple.com/thread/4793244?start=90 )

  • Lumia 925 apps not updated Error:80060010

    My wife's Lumia 925 does not update apps. In the store tile it shows number of pending apps, but when opening the store, I only can see adds of various apps. Sometimes get Error code 80060010. What's wrong?
    I do not have similar problems with my own 1020.

    Good day. Visit this link: I cannot download or update apps from Store and see if the workarounds will do the trick. The link may be intended for the US, but the content is applicable wherever your location is. Keep us posted. ;-)

  • IPhone could not update - error 1062

    I tried to update to 1.1.4 and also to restore and both times it says it either could not be updated or could not be restored. Both times is says error 1062. I've read about 1064 but what is 1062 and how can I fix it so I can update/restore my phone?
    Message was edited by: tag098
    Message was edited by: tag098

    Error -1602 means that the iPhone could not communicate correctly with iTunes. There is a Apple product at one end of the connection, and an Apple product at the other end. These are the only two parts that Apple can control, and even then iTunes is subject to the whims of other programs on your computer (especially antivirus programs). In between there is Windows itself, USB drivers, USB hardware, other USB devices sharing the bus, memory, CPU timing...none of which Apple can control.
    If you have carefully followed all of the instructions in http://docs.info.apple.com/article.html?artnum=306084, updated your USB drivers, made sure your USB ports are version 2, are not using an external USB hub and have no other USB devices connected then there is something about your computer that does not meet Microsoft and industry standards. This is beyond Apple's control to fix. If you take your phone to an Apple store they will update it for you. You can also try another computer.

  • Can not update error 1602 and can not restore error 1604 what is the solution

    Have a IPod touch 4, can't update (error 1602) and can't restore (error 1604) any solution?

    try this support article.

Maybe you are looking for

  • Problem in Update Statement

    I got some problem in update statement.Can anybody discuss with me regarding my problem? Below is the occured problem. //all the declaration like Connection, ResultSet are declared, setting the ODBC path and so on steps have been set up before this m

  • PDF form field populate

    Hi, I am currently trying to figure out a way to populate certain field forms from a database I built from Excel using Access. I am a complete newbie at scripting and I know that will be involved. I also know that I would need to bind certain fields

  • "All Choices" in dashboard prompt

    Hello gurus, How can I rename the "All Choices" in the Dashboard prompt? Example: change to "All Countries" Thank you, Felicity

  • Can't cut/paste album art

    For some time now I have been adding/changing album cover art by cut/paste from an internet image search and then using "Get Info" to add the art. Now suddenly I can't. I can't get the Paste function to add the art. Has something changed in the last

  • Ad hoc network for Airplay Mirroring

    Can you create an ad hoc network between an Apple TV and a MacbookPro to use air play mirroring? It would be useful when there is no available wireless network?