PO not visible in WEBUI when Multiple Sup. loc linked to one Sup Org BP,SNC

Hi,
We are implementing SAP SNC 7.0 and started small testing's.
When one supplier location(each individually) is assigned to Supplier org BP, PO is visible in WEBUI.
When two supplier location is assigned to one supplier org BP, PO is not visible and message says"Order not found for the selection"
Whereas when i go to SMI details, it shows data for both supplier location in WEBUI.
Their is no visibility of POand demand.
Thanks & Regards,
Siva

Hi Siva,
You have created PO when one supplier location(each individually) is assigned to Supplier org BP.
In Purchase order Supplier field=<Supplier BP Org> so when two supplier location is assigned to one supplier org BP you have removed supplier BP org for which you have created Purchase order and this is the reason why it is not visible.
Eaxmple:
Supplier1:10000
Supplier2:20000
Case 1)when one supplier location(each individually) is assigned to Supplier org BP
say Supplier1:10000 is assigned to supplier Org BP=10000
say Supplier2:20000 is assigned to supplier Org BP=20000
and you have created Purchase order 45000001 for supplier 10000.
Case 2) when two supplier location is assigned to one supplier org BP
say Supplier1:10000 and Supplier2:20000  is assigned to supplier Org BP=20000
or
supplier Org BP=30000 then you won't be able to see purchase order in SNC web UI as when you have created purchase order supplier BP org was 10000 and now it is 30000 or 20000.
Regards,
Nikhil

Similar Messages

  • Why are the jpeg icons not visible in finder when created by PS6

    Why are the jpeg icons not visible in finder when created by PS6

    hi
    I have faced the same problem ... I didn't find the solution yet
    but please visit this link http://www.oracle.com/technology/products/forms/pdf/webicons.pdf
    you'll get everything you want to know
    I'm not try it yet.
    Best wishes

  • Can not access email addresses when they are a link. F/F goes nuts and "untitleed " keep flashing across the top of the screen.I have to get out of that page fast or manually shut down thwe computer.

    Can not access email addresses when they are a link. F/F goes nuts and "untitled " keep flashing across the top of the screen.I have to get out of that page fast or manually shut down the computer

    Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
    This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

  • Dialog not visible from sidekick when using dialog participant step

    I am using the Out of the box dialog participant step in my workflow. I have created a dialog and using in the dialog participant step. When i start the workflow, the dialog is only available/visible when I complete the task from inbox and not visible when completing the task from sidekick.
    Any suggestions/pointers are Appreciated.
    Environment : CQ 5.5, Windows 7

    Unfortunately, It is known issue.  Please file daycare & provide the business importance & a schedule.

  • Ztransaction type not visible in webui as follow up under Zopportunity type

    Hi Gurus,
    I have made an exact copy(z005) of 0005 (outgoing email), have enabled the transaction for the Web Channel, have all the authorizations and still cannot see the Z copy on the webUI ib CRM test server,
    and also assigned Categories (email) to Transaction Types(z005) in
    spro>crm>transactions>settings for activities>maintain categories, goals & priorities>Assign Categories to Transaction Types
    same way i have created an exact copy(zopt) of "oppt" have enabled web channel, and now when i open it and try to create follow-up transaction, here it is not showing (z005) i.e "z" outgoing email transaction as an option but showing other z activity transactions which i created automatically in CRM test system but it is working fine in CRM development system.
    i am not able to figure out what is going wrong in CRM test system.
    Please help it is critical.
    thanks,
    G.One
    Edited by: wwgauravshah on Jan 28, 2012 8:14 AM

    Hi,
    in standard SAP offering , Business activity and task transaction type are given as follow up for opportunity transaction type , it becomes more evident in my case bcoz even in my CRM development server no copy control are maintained still it is visible in GUI and webui interface,
    moreover i also checked authorisation( and profile sap all) for  business transaction object "crm_order_op" it is " * " in my login role "sales representative".
    even OP generic settings are same( total 572 ) in all CRM systems(i.e dev,test and prod),
    and also as i said earlier that these transaction types (bus2000126-outgoing & incoming email activity) are visible in GUI (test & prod)but not in WebUI interface.
    is there any note or something...or does it has to do anything to user assigned to a position in organisation model  or any SICF object or any email setup (basis).
    please help it is critical...
    Thanks,
    G.One

  • Letters or not visible on screen when typing

    Don't if it's a setting I don't know ABT are STHING is wrong but when I type none the letters are visible but they are there

    Hi @verydisapointed , 
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Notebook not showing the typing. Try looking at this Youtube Video.
    If that did not fix it, here is a link to Adjusting TouchPad or ClickPad pointing sensitivities in Windows 8. At the bottom you will see restore defaults click that. Then restart the Notebook.
    You can do a system restore. System restore will help if something automatically updated and did not go well on the Notebook or when the issue started.
    When performing a hard reset please note remove any and all USB devices. Disconnect all non-essential devices.
    Hope this is helpful.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Bootable ISO images not visible in PCD when doing Migration Task

    We are looking to move from CUCM 8.6 to CUCM 10.0 using Prime Collaboration Deployment. We have the full 10.0 media for CUCM and IMP. We created an ISO image of each and uploaded them to the /fresh_install directory on the PCD server. When creating a migration task in PCD, when we get to the point to select an image and click Browse, nothing is there. We also tried downloading the bootable 10.5 media from PUT. After uploading that media, this was visible, but the 10.0 image we made from the original CD was not.
    It appears PCD is doing some sort of validation check against the ISO. What can we do to ensure we create a valid image from the Disc so PCD can see it?

    Hi, Jack.
    I have the same question, could you provide more details? Thanks!
    Say, in the log I found this: The given directory was located and searched but no valid options or upgrades were available. Note, the system cannot be downgraded so option and upgrade files for previous releases were ignored.
    But this does not clarify the question.

  • Spot chanel white not visible in ai when psd file is placed (CS6)

    TIA for the help.
    Hopefully somebody here can point me in the right direction. My appologies if this was covered already, but I've searched left and right without any luck.
    We use spot channels in PS and as of CS5 have to print out of Illustrator in order to adjust the lpi and angles (for printing film positives).
    Since upgrading to CS6 the white is not showing in the Illustrator any more and it seems that the rest of the colors are very translucent.
    Turning on the overprint preview does not make any difference and there is no option to change the color to a "spot color" they show as RGB.
    To tyr to clarify:
    creat a blank document in Photoshop
    creat new channel
    change the channel to spot color and assign CoolGray1
    draw or type anything directly into the channel
    turn off all the layers and RGB channels
    save and place in Illustrator
    create black bacground and move the image on top of it.
    the gray square is just about visible.
    If a white ink was used, it would not be visible at all.
    thanx in advance!

    Select the placed psd in Illustrator
    Check "Isolate Blending" on the Transparency Panel...
    Does that help?
    More information on the transparency panel can be found here:
    http://help.adobe.com/en_US/illustrator/cs/using/WS714a382cdf7d304e7e07d0100196cbc5f-64eba .html#WS714a382cdf7d304e7e07d0100196cbc5f-64e9a

  • Interfaces not visible in 'Operator' when executed with 'Remote Agent'

    Hi,
    I am new to ODI, and have an issue with running Interfaces/Packages with a Remote Agent.+
    I have setup an agent on the machine on which the Database is installed. I have created a Physical Agent with the details, and on using the 'Test' button in the client, it works fine.
    However, when i try an execute a package with this agent, i get the 'Session Started' pop up, but the interface does not register in the 'Operator' section, and nothing happens.+
    However, this does not happen when i use the 'Local (No Agent)', and the interface runs successfully and is registered in the 'Operator'.+
    I just get this error under the 'Physical Agents' tree in the 'Operator' section for the interface - "ODI-1266: Agent agent_apo13110026 detected Session as stale session and set to error status"
    Would appreciate any inputs.
    Thanks,
    Ab

    Hi,
    Thank you for your response.
    We have actuall just migrated the from DEV to TEST. But in DEV we were only using the local agent, and we have configured the new standalone agent only in TEST.
    The way the migration was done, was that we exported the Master and Work Rep from DEV, and then imported it into TEST.
    Could this have had any impact, and would appreciate any pointers on how i can check if indeed the Agent is interacting with the wrong repository.
    Thanks,
    Ab

  • Graphs / Images not visible in Excel when exported from BI Publisher

    When attempting to view a report containing a graph in Excel format from BI Publisher, if you select the View button, the graph image is successfully rendered on the Excel report page.
    When selecting the Export button, however, the image is not successfully rendered, and an image placeholder is substituted on the report.
    I have changed the web.xml file setting on the server under:
    C:\oracle\bise1\bi\oc4j_bi\j2ee\home\applications\xmlpserver\xmlpserver\WEB-INF\web.xml
    Here I changed the SecurityFilter Filter Mapping
    from:
    <url-pattern>/xdo/tmp/*</url-pattern>
    to:
    <url-pattern>/xdo/tmp/*.tmp</url-pattern>
    This was successful in facilitating image rendering in Excel in the first place, but not when the Export button is used.
    Note: BIP Version is 10.1.3.2.1
    Excel Version is Excel 2007
    Any assistance with this will be most appreciated.
    Daniel
    Edited by: user11369130 on 21/01/2010 20:08

    Hi,
    I had similar kind of problem and see below for details.
    I am using Vertical bar charts in my RTF Tempalte and output format is EXCEL. When i am prevewing from BI Publisher desktop output it is showing the charts . When i Used same template and running in the server side(i.e oracle applications concurrent manager ) it is not showing the charts in the output. If i run the same template through oracle applications concurrent manager with PDF output it is showing charts in the output.
    Please share your thoughts/experiences/suggesition regarding this.
    If any help appreciated.
    Thanks,
    Dinesh

  • Nano 3rd will not unlock and is not visible in iTunes when connected to computer.

    My 3rd Gen Nano is stuck in locked position with the screen lit.  Additionally it does not show up on the computer or in iTunes when connected.  I can't restart or repair myself.  I suspect the locked switch may be broken.  Any ideas?

    First of all, try another port on your computer. Some ports are not connected direct to the motherboard and do not recognize the iPod as well as those that are.
    Still no joy? See these.
    iPod doesn't appear in iTunes or on the Mac desktop.
    iPod does not appear in iPod Updater or iTunes in Mac OS X.
    iPod appears on the Mac OS X desktop but not in iTunes.
    Try it in disk mode.
    Putting iPod into disk mode.

  • Shuffle will not work in itunes when multiple albums added to "up next"

    When I add 1st album to play, shuffle option is available. Shuffle disappears when subsequent albums are added

    I have the same problem. I do not know for sure if this is what caused it but it kept reminding me to upgrade itunes so i did. Now my shuffle doesn't show up on my computer or in itunes, and there are NO songs on it. I had to restore my ipod but it said there was an error and it never finished and now it doesn't show up in itunes or windows.I plugged this into another computer but it doesn't load on that computer either. a green light comes on and blinks slowly. I have no idea whats wrong.

  • Complaint reason not visible in WebUI

    HI,
    I configured a complaint transaction with a subject profile attached to it.
    I am able to see a drop down of reason codes in GUI but the same cannot be viewed in WebUI.
    Does anyone have any idea regarding this issue.Please help.
    Regards,
    PP

    Hi PP,
    You need to Define
    1- Define a Catalog
    2-Create Code Groups and Codes for Catalog
    Then in SPRO under Setting for Complaints click on Define subject profile. Select your subject profile and assign Code Group profile and Code Groups
    Regards...
    Arup

  • Is it possible to stop iTunes generating a separate album cover when multiple artists are involved in one album

    Is it possible to stop iTunes from generating a separate cover for each artist when the album has multiple artists?

    when importing album artwork, does anyone know if its possible to make it not embed the artwork in every file and instead act like the artwork downloaded from the iTunes store?
    It is not possible.

  • Blackberry z30 - not showing the mobile when connected with blackberry link

    sir ,
     first when i bought the mobile  z30 - my mobile was is good conditon ... suddenly today (15-1-2015) i couldnt type in my device password, mobile got struck ,then i connected my mobile with balckberry link and made a reset ... now the mobile is not upto themak....i dont feel it  works as before. ...now am connecting it with blackberry link with mobile the link detects my media card in mobile and gets connected  with i tbut it doesnt get connected to the mobile device...
    please provide me solution.. so that i could get my mobile to old gud condition
    waiting for the reply , thanks in advance,

    trishul22g wrote:
    sir ,
     first when i bought the mobile  z30 - my mobile was is good conditon ... suddenly today (15-1-2015) i couldnt type in my device password, mobile got struck ,then i connected my mobile with balckberry link and made a reset ... now the mobile is not upto themak....i dont feel it  works as before. ...now am connecting it with blackberry link with mobile the link detects my media card in mobile and gets connected  with i tbut it doesnt get connected to the mobile device...
    please provide me solution.. so that i could get my mobile to old gud condition
    waiting for the reply , thanks in advance,
    Sorry to respond that your post is vague.
    Did you do a reset to factory?  It takes a day or a few days for a BB10 device to finish sync'ing and indexing and so forth after a wipe or an OS reinstall or upgrade.   If performance is subpar, give it another day to see if it improves.
    On the last, I may not understand.  I believe you are saying you are connecting to the device with Link and the computer mounts  the microSD card as a drive but not the device's onboard memory.  Do you have mass storage mode enabled?   If so, disable mass storage mode and try again.
    - Ira

Maybe you are looking for