PO number and material issued against this PO for subcontracting

How to know the link in between the PO number and material issued against this PO for subcontracting.
I have checked that PO history is not getting updated.
Thanks,

Hi,
We have 2 different scenarios where you can post a goods issue to Subcontract Venodrs.
Scenarios 1: You can post the goods issue against a subcontrac vendor with out referencing the Subcon PO from ME2O, at this stage we will be knowing what is the stock at subcontract vendor but we will not be knowing the issues against which and how much Quantities are posted.
So when we are post goods receipt, then we will come to know the consuption quantities.
Scenario: 2, If we use the delivery concept then we can track the goods issues against the subcon POs.
If you really keen to track the material issued to Subcon vendor against a PO so better use with delivery.
Thansk,
Satya.

Similar Messages

Report for Material Issued against Service Orders But not Billed.

Hi Experts,
For CRM Service Orders Based on the Reservation number generated in CRM we will make the Goods issue document in ECC.
My Question In CRM Do we have any standard report to see Material issued against CRM Service orders but not billed. i.e. Work in progress.
Thanks in Advance,
Abhinesh

Hi Vivek,
What I wanted to say that you won't get information from VAV about billing since as far as I know it doesn't contain any relevant table.
You should try create a query using LIKP-LIPS-(joint type: left outer)-VBRK. This will connect deliveries to billing document, you can also get SO number. Please try this.
(Sorrowully I don't know which logical database would be good for you)
BR
Csaba

Excess material issue against RSQ

Hi Gurus,
We are using repetitive manufacturing in our organization (Automotive Industry), the material staging is done based on the plan order with pull list as per the BOM, but in case excess components are required how can we stage this excess material?
Scenario-In BOM we are having steel washers as 4units (staged against pull list printout) and during operation 2 units got scrapped, how can we stage this additional requirements of 2units at production supply area?Against which document this additional requirement can be staged in REM?
Regards
cs

Hi Antony,
Thanks for your reply..
Yes I agree it can be done with component scrap during MFBF transaction,requirement here is the printout of required excess material issue,against which the store guy will stage the material.
The store department want to record against which plan order this excess material has been issued.
Please advice.
Regards
cs

SWAP Equipment using IE4N, without serial number and material, it is possible?

Hi PM Experts, I´ve been reading about the way to SWAP equipments from his functional location without using serial number and material, I think if it is not possible, but to be honest, I cannot find any logical answer for it, since equipment number is unique for a plant. Does anyone have found any work around for it?.
I don’t want to use serial numbers and materials, because I think the process is really simple, since the client does not want to implement the refurbishment process. If there is a break down, here is what I do:
Case 1:
Dismantle damage equipment (Say PM01 Order Type)
Install new equipment (same PM order)
TECO the actual PM order
...Later
Case 2:
Create a new PM orden (say PM01 Order Type)
Repair the break equipment
TECO this new PM Order
Here are the inconsistencies:
What happen with the MTTR and MTBR reports?
In case one, I´ll create the material as equipment, while I´m installing, starting date for his master data is the installation day, and the MTTR and MTBR will start to run. This is ok.
What happened in case 2?, I need to stop the “clock” for the MTTR and MTBR of the dismantle equipment.
This is the reason why, I would like to use IE4N, but since there are no serial number and material, I cannot.
Can anyone please suggest a workaround for this scenario?.
I´m thinking in use INAC (Object Deactivated) system status, can this status help me?, Does this status “stops” the clock for MTTR and MTBR report?. If I change the status to ACT, I´ll get the clock back running?.
How about dismantle the equipment?, It will get the AVLB Available status, but the problem is, this equipment will be “floating” in the whole PM structure and I do not want it. I want to have it in a specific Functional Location but with this status, is this possible?. I woul like to use IE4N to SWAP UTs and later change the status to AVLB Available status, with and exits.
I thinking in an Equipment Status and a “Z” MTTR and MTBR report, based on this status. But to be honest, I´d like a standard solution for it.

For find my iPhone to work, the device has to be powered on and it has to be connected to a network (Cellular or WiFi). Find My iPhone uses your AppleID as the account to search for. Maybe the "guys" you were talking to were referring to a 3rd party application that essentially lo-jacks your device. But even then, it would still require Power and a network.
I don't believe that there is currently a way to flag a specific serial number for location.
Best of Luck.

Shipment number and material move doc

What is shipment number? When and how is it generated? What is difference between shipment number and material movement doc number?

Hi
When you want to send several deliveries into one truck (mode of transport) and the truck is to deliver the goods to several ship-to-parties along a particular route, then this function is called "Shipment function".
The document prepared for it is called Shipment document.
Normally, in shipment we combine more than one deliveries meant for one specific route.
Shipment can be done before as well as PGI, but normally it is done before PGI.
Once PGI is done, Material document is generated.

Relation between Material Number and Material document Number.

hi xperts,
I want to Know Is there any Relation ship between the <b>Material Number</b> and <b>Material Document Number</b>.
If So can i get any Tcodes to check them?
Thanks in advance.
Message was edited by:
STALIN JOSEPH

Hi,
Thanks for your reply.
I want to Load the Inventory Management Data into Business warehouse ,there the Only way i correlate the Data between is by taking some material Number.
and Material Document.
In step 1 i load Material Number data and step 2 i load material document data,so i want to make cure those two loads i load the same material numbers.
Please help me to collerate between them.

In the packing list, batch number and expiry date is not appearing for a ma

Dear Friends,
I have an issue in the packinglist.
In the packing list, batch number and expiry date is not appearing for a material.
But in the delivery the batch number and expiry date is appearing.
Why this has triggered and how to solve this?
With regards

Hi Vamsi,
Please go through the output type Smart form or script programe of the packing list and check with the abaper If is there any Bug.
Regard's
Murali.

Hi, I would like to install my Creative Suite 5.5 Design Standard - I got the serial number and disk, but you are asking for another product and serial number that I dont have? What should I do?

Hi, I would like to install my Creative Suite 5.5 Design Standard - I got the serial number and disk, but you are asking for another product and serial number that I dont have? What should I do?

The serial number that you might have is an upgrade version & it will be asking for a previous qualifying version serial number.
The issue can be different too, please contact Adobe Support for resolution: http://adobe.ly/yxj0t6
Regards
Rajshree

How do I get out of cs3 Illustrator's upgrade check? I already have a purchase serial number and there is no known, upgrade for CS3 for Illustrator. It has CS2.

How do I get out of cs3 Illustrator's upgrade check? I already have a purchase serial number and there is no known, upgrade for CS3 for Illustrator. It has CS2.

Questions:
Is the app store looking to my hard drive for traces of aperture to determine whether it has been purchased or is it looking at some kind of purchase history within the app store?
Is there anyway to wipe my hard drive clean of aperture files or wipe clean my app store purchase history so that i can start over?
If none of this is possible, does anyone have a possible solution?
If i were to redownload aperture (currently for free since it won't let me pay) when a subsequent update comes out (say it goes from version 3.2.2 to 3.2.3) can i then elect to buy aperture, pay the fee and will it appear as a purchased app and allow me to get upgrades going forward? Would any data be compromised with this?
1. Do you have a backup connected to your Mac that contains the app? If so, yes the MAS can detect that and believes that the app is installed.
2. If the app no longer appears in the purchase history on the Purchased pane in the MAS, then it would seem that Apple has taken care of that.
4. Updates, such as you describe are free. Upgrades are not. An upgrade is a new paid version of the app, such as v 3.0 to v 4.0.

I am using iphone 3gs since last 4 days. Till yesterday night it was working fine and i have connected this phone for charging . Morning there was apple logo in the screen and every 1mte (approx) it is blinking. I could not restart the phone.Plz help

I am using iphone 3gs since last 4 days. Till yesterday night it was working fine and i have connected this phone for charging . Morning there was apple logo in the screen and every 1mte (approx) it is blinking. I could not restart the phone.Plz help . I have tried to reset even by pressing sleep and home button but it could not help. Please suggest. Still i have connected for charging .

Sounds like you have corrupt backup data, if this occurs from one phone to another. Try restoring the phone as a new device, without a backup. Try using for a day before installing any other apps, etc. See if that improves the battery life. Then try syncing back applications a couple at a time. Something seems to be locking in the processor which is draining the battery.
Do you live in an area where there are Apple Stores? If so, try making an appointment with the Genius Bar to have the device checked out.

How do I reinstall Lr 5? I have my serial number and don't want to pay for Lr 5 CC.

How do I reinstall Lr 5? I have my serial number and don't want to pay for Lr 5 CC.

If you don't have an Installer disk then you can't install without a purchase. Do you have the grey SystemRestore disks that came with your Mac? It's on that. No, iPhoto is not part of Lion.
Regards
TD

Adding Storage Bin Number to Material Issue Slip - RIPRGI00

Hello,
I have a request to add the storage bin number to the Material Issue Slip with output type zpmm. However, I need help on where in the code I need to add this field. I know a program change needs to happen in RIPRGI00, and the SAPscript layout Z_PM_COMMON needs to be changed too. I believe the storage bin number field is RESBD-LGORT. Please correct me if I'm wrong so far. Your guidance is appreciated.
Thank You!

If you're talking about MM Storage Bin it is maintained in MARD-LGPBE.
It's maintained at material master level in "Plant/stor data" view 1. (you need to enter the storage location in org. level in MM03 to be able to even see the field.

Map BATCH number corresponding to ORDER number and Material number .

hi all,
i want to map the BATCH number corresponding to Material Number .
i searched tables MCHA which has two fields Material number and Batch number but it doenot have Order number.
so how can i get Batch number as in table AFPO/AFKO i have all these three fields batch/material/order numbers.
but the batch number column is blank for all .
and in case of table MCHA , these is assigned batch number to every Material number .
also i want to ask , either the Material number in both tables (MCHA AND AFPO) is same or different as i didnot found any relation to map these three field by other fields too.
so please suggest me the Possible way to resolve this .....
sunny

hi dsk,
thanks for your earliar reply,
actually iam working on sapscript there i want to add batch number ,but i am not able to clear my doubt from where i get this.
how can i map batch number with corresponding to PO num ber, '
in the report i used structure vbplp with field charg"(batch num).
also i want to know from which table i can get customer part number and Po number .
how can i add batch num ,..
from which table or with which field i can compare itr to get .
sunny

Acrobat X Pro - serial number and languages issue

Hello!
My OS is in English but I'm used to use the Adobe suite in French, so I bought the french version.
While installing all was OK, the serial number worked.
Illustrator, Indesign and Photoshop work perfectly.
But when I try to launch Acrobat, it askes me for the serial number. It somehow automatically detects North America while I'm in Europe. And my serial number doesn't work (This serial number is not valid for your product).
I tryed to change the system language to French and Acrobat worked correctly without asking for the serial.
Back to English, it asks me for the serial...
Does anybody have an idea of how to solve issue?? I really hate having my OS in French...
Thanks!
Larissa

I got the answer somwhere else, so I copy here the link if it may be helpfull for someone: http://hints.macworld.com/article.php?story=20110522014935224

Get Material Document Number and Material Document Year

Hi everyone,
Right now, i'm developed idoc program. I need material document number (MBLNR) and material document year (MJAHR). I have information only BAPI2017_GM_HEAD_01 and BAPI2017_GM_ITEM_CREATE. Is there any FM to get this value ? Thank you
Regards,
Satria

Ok, i will explain with more detail about my problem
Here my pseudocode :
- Get data with type BAPI2017_GM_HEAD_01 from Idoc (let we say this X)
- Get data with type BAPI2017_GM_CODE from Idoc (let we say this Y)
- Get data with type BAPI2017_GM_ITEM_CREATE from IDoc (let we say this Z)
- IF Y-GM_CODE <> "06" THEN
       CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
           EXPORTING
               GOODSMVT_HEADER = X
               GOODSMVT_CODE     = Y
           TABLES
                GOODSMVT_ITEM      = Z
   ELSE IF Y-GM_CODE = "06" THEN
       CALL FUNCTION 'BAPI_GOODSMVT_CANCEL'
            EXPORTING
                 MATERIALDOCUMENT = ???
                 MATDOCUMENTYEAR = ???
                GOODSMVT_PSTNG_DATE = ???
I know that material doc and mat doc year is in table MKPF. But the problem is they are the primary key, so how i use X,Y,Z in select operation to MKPF? or is there another way using FM ? Thank you
Regards,
Satria

PO number and material issued against this PO for subcontracting

Similar Messages

Maybe you are looking for