PO ORDCHG - idoc - releationship browser population Error

Hi ,
I tried to create a purchase order and changed it. All the configurations for IDOC are working fine for Purchase order creation and Change. The IDOC generated for Purchase order create is populated in the Releation ship browser but however the IDOC Created with ref to Change is not populating in the relationship browser.
ANY IDEA please.
Thanks and Regards,
Mukthineni Krishna

HI,
probably there's something wrong with the COMMIT phase. Try to force COMMIT during the  IDOC creation in the CHANGE phase of Purchase Order or to use a WAIT instruction ...

Similar Messages

  • ORDCHG IDOC for Partial Delivery

    Hello Guys,
    Is it possible to trigger ORDCHG IDOC outbound when a partial elivery happens for the PO via MIGO.I know that the GR qty is not change relevant.So even setting it as part of change relevent field does not not trigger the IDOC.
    Do you guys have any experience on this.
    Regards,
    Arun

    it is a Typo mistake (System error)again i am posting this
    i have a requirement STO NLCC delivery we need to do delivery for partial quantities(this is the requirment please do not ask why you need this )
    in PO (NB) quantity is 10
    in NLCC delivery i changed it to 5.and did PGI  and Billing for 5 quantities.
    in the PO the remaining quantity 5 is still there.i want to do delivery for that 5 quantities by using VL10B.but it is not appearing in the List.
    could anybody worked this scenario before, then please guide me how to do delivery for remaining quantities.
    Regards
    sundar

  • The Favorite Content Portlet could not be populated.Error Message

    Hi all,
    I am new in PORTAL, I made an Instant portlet which was working fine. But then started an error occuring when I view the Portal Page: "The Favorite Content Portlet could not be populated.Error Message." This error is show in a dialog box when ever I view page or navigate to other tabs(subpages) of portal.
    When I diagnose I got that this error is in "Main Navigator". If I delete the Main Navigator from Portal this error does not occur. But without Navigator subpages(tabs) cannot be visible.
    This is the case when I make new INSTANT PORTAL. Please Help urgent!!!!!!!!!!!!
    Thanks,
    Fahim

    I strongly recommend upgrading to the 3.0.9 release (iAS
    1.0.2.2) with the 3.0.9.8.2 patch (this patch should be
    available for NT/2000 this week). Also, the database should be
    running 8.1.7.1 (or later), as explained in the iAS release
    notes.
    Regards,
    Jerry

  • IDoc failed with the error massaeg "Instance of object type could not be ch

    Hi All
    I am getting IDoc failed with the error massaeg "Instance of object type could not be changed"
    Message type :PORDCR
    Basic type : PORDCR05
    Message no. BAPI003
    Status : 51
    All POs are get uploaded in SAP during Cut over activities only.
    Please suggest on this.It will be a great help.
    Thanks
    Ajit

    Hi
    After uploading POs into SAP we are changing quantity and value in PO in Legacy system, and for this all IDocs are failed, subsequently these changes are not triggering to ECC.
    Please help
    Thanks
    Ajit

  • IDoc included in IDoc packet containing an error: transfer it separately

    Hi Gurus,
    I'm having this problem in our ECC side. I already did what Michal said in his blog:
    /people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change
    I have bundled the multiple IDOCs into 1 MATMAS.
    But I'm still having the error IDoc included in IDoc packet containing an error: transfer it separately.
    I've searched in the forums and none of them worked for me.
    Thanks in advance!

    Disable packaging or change the Partner Profile on WE02 transaction to "process immediately" the IDOCS.
    When you process the IDOCS in background mode, it will create packages (it is enabled by default), and in case any of them fail you won't be able to see the root cause, but will have to go to BD97 transaction to process them again. Therefore, please use the "process immediately" or disable packaging and then you will be able to either see the error or process it because it won't fail because of another IDOC.

  • IDOC is posting with Errors in File to IDOC scenario

    Hi,
       I did the File  to IDOC scenario for CREMAS  . IDOC is posting with Errors .. i.e. in the status record it was showing  56- EDI: Partner profile inbound not available  ..
    If I manually process that IDOC in WE19 , then it was processing successfully..    and in the  we19 it was showing Inbound Processing : Port Not Maintained    but even though manually it was posting fine...
    any ideas regarding this will be appriciated..... 
    Regards
    Babu

    Please check whether you had done the following assuming your doing File to Idoc
    Settings in your Business service for the receiving system
    Please specify the RFC detination, SAP System and Client of the Receiving System in the adapter specific detials.
    Settings in R/3
    WE20 - Add the partner profile for the particular message type cremas and process code.
    Your statement
    " and that same logical system name  had given as Message Specific Attributes in the Sender Business Sevice parameters in I.D "
    Please do mention R/3 Details in the receiver business service or system.
    Thnz

  • For IDOC monitoring, analysis and error handling in  ALE & idoc

    Hello...experts..can u please tell me about idoc monitoring,analysis and error handling..and can u please tell as per interview  point of view in this area..if availble can u send material about this...
    thx
    Message was edited by:
            durga kottapalli

    Hi,
    Reprocessing IDocs with errors
    Outbound (BD88)
    Once the error has been determined and corrected it is not necessary to resend the IDoc again. You simply resend the IDocs that have already been generated.
    Using the IDoc overview screen you need to take note of the following for each IDoc that was not processed:
    Error number: 2, 4, 5, 25, 29
    Error number: 30 (Execute Check IDoc dispatch to process)
    IDoc number
    Using the Error number, the IDoc number and the transaction BD88 , with the required message type you can resend the IDoc. Match the error number with this transaction and execute the function for the IDocs incorrectly processed.
    Just check the below link, u will get all IDOC related Interview questions
    http://www.allsaplinks.com/idoc_sample.html
    http://www.allsaplinks.com/
    http://www.sappoint.com/abap.html
    http://www.sap-img.com/
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDISC/CAEDISCAP_STC.pdf
    http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDI/CAEDI.pdf
    http://www.sappoint.com/abap.html
    http://sap.ittoolbox.com/documents/popular-q-and-a/extending-a-basic-idoc-type-2358
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
    http://expertanswercenter.techtarget.com/eac/knowledgebaseCategory/0,295197,sid63_tax296858_idx0_off50,00.html
    http://www.sapgenie.com/sapedi/index.htm
    http://www.allsaplinks.com/idoc_sample.html
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEIO/BCMIDALEIO.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEPRO/BCMIDALEPRO.pdf
    http://help.sap.com/saphelp_47x200/helpdata/en/dc/6b7eee43d711d1893e0000e8323c4f/frameset.htm
    http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
    http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
    http://www.sap-img.com/
    http://www.allsaplinks.com/
    Regards,
    Suresh.
    Message was edited by:
            SureshKumar Ramamoorthy

  • 5 IDOC with status 29 Error in ALE service

    hi there,
    im looking at this similar problem with less information on me the only info i got is this can anyone help me out pls
    IDOC Status Outbox:
    IDOC failure between 13/07/2008 to 14/07/2009
    1 IDOC with status 02 Error passing data to port
    5 IDOC with status 29 Error in ALE service
    IDOC Status InBox:
    88 IDOC with status 51 Application document not posted
    regards
    raju

    Hi,
    Check this thread.
    DB13-DBCHECK by saving log-throwing DUMP:TSV_TNEW_BLOCKS_NO_ROLL_MEMORY
    Regards.

  • What is Browser Launch Error: 193? Cannot access Java information

    After about the last 2 updates to Firefox, when I am updating Java, and wish to click on "Additional Information" there is a small box which pops up and states: Browser Launch Error: 193. Therefore I
    am unable to access the additional information.

    when an update is necessary an icon appears in the bottom bar (task bar), and I click on the icon to begin viewing it. When it has downloaded the install box appears with "terms of service". When I attempt to click on this is when the "browser launch error: 193" appears, and I cannot read the "terms of service" (or similar statement). The small box indicating the "browser launch error" pops up in the middle of the larger screen for downloading. This has only occurred since the last 2 (or 3) Firefox updates, so wondering if the updates are related to this(?). Never had this problem previously with the Java updates. I am bewildered by this, and the inability to read the "terms of service" (or similar statement). Because it states that you accept the terms of service, however without reading it, a user does not know what it says. Thank you both for your recommendations.

  • ORDCHG - IDOC - ORDERS05  Issue IMP

    Hello,
    we have configured ORDERS- IDOC - ORDERS05 for ouput type ZSPO. User is going to trigger output manuallly in every case.
    If PO is changed still same output will trigger. Till this everything works fine.
    Now suppose one item is marked for deletion and output is triggered manually this item does not come in IDOC itself. And i want to send this with deletion indicator.
    How can I configure this? I tried adding ORDCHG - IDOC - ORDERS05  with same output type but still ORDERS IDoc gets triggred.
    Please suggets.......!!
    Thanks

    For orders change there is a different process code - ME11 for 'ORDCHG' and ME10 for 'ORDERS'.
    In case of changes make sure that in your partner profile setup (WE20) also the correct process code is assigned.
    Regards,
    Dominik Modrzejewski

  • Getting error 51 saying 'IDoc included in IDoc packet containing an error'

    When I am processing idoc in LSMW, getting error saying 'IDoc included in IDoc packet containing an error'.
    Can any one tell me how to resolve this.

    Hi,
        Change the packet size to 1 then process again.

  • Getting error saying 'IDoc included in IDoc packet containing an error'.

    hi experts
    When I am processing idoc in LSMW, getting error saying 'IDoc included in IDoc packet containing an error'.I changed the packet size also but it was not resolved.
    Can any one tell me how to resolve this.

    Hi,
        Check below link......
    Getting error 51 saying 'IDoc included in IDoc packet containing an error'
    even this link is not solving problem then check the aplication log to get exact error text.
    Thanks,
    Asit Purbey.

  • IDoc adapter inbound channel: Error Fehler beim Le

    Hello,
    I have a BIG problem. I want to use IDOC - XI - IDOC. I have configured the connections. But when I send the Idoc to the XI. it returns a code in the SM58 "IDoc adapter inbound channel: Error Fehler beim Le" The Message comes cut, it doesn't return all the message. In the XI doesn't give me any error, nothing. The IDOC says thta it has been sent correctly (Code 3). How can I trace the IDOC from de sender to the XI?
    I wanted to use the IDOC HRMD_A06 but now i'm trying with SYIDOC to see if it passes.
    Can Someone help me?
    Caller       Function module               Target system Date       Time     Status text
    SRGEN13      IDOC_INBOUND_ASYNCHRONOUS     RHXCLNT013    07.04.2006 10:06:46 IDoc adapter inbound channel: Error Fehler beim Le
    Thank you
    PM

    I want to know if the Connections have to have SNC?
    I have read this in the note http://help.sap.com/saphelp_nw04/helpdata/en/ca/fafaf6dbc8b240b1cf4a88c40379b2/frameset.htm
    Inbound and outbound connections should be secured by Secure Network Communication (SNC).
    Is that correct? maybe that's why it says the that error
    PM

  • IDoc adapter inbound channel: Error Error when reading Exchange Profile

    Hello Experts,
    Currently i am working on an IDOC to file scenario, in which Data will be sent from ECC server (IDOC) to an FTP server via SAP PI, but when i try to send IDOC to PI, i am getting the following error
    in Transaction SM58:-
    'IDoc adapter inbound channel: Error Error when reading Exchange Profile for system XID and
    client 401 occurred in the IS pipeline' .
    Can anyone please help me on this.
    Thanks & Regards,
    Amit Naik

    Hello Experts,
    Let me explain to you the whole scenario, We have two servers of PI, 7.1 & 7.0. Now the Java Stack of 7.0 is not working & Cache update of 7.1 is not happening.
    Thats why we have linked ABAP stack of 7.0 with Java stack of 7.1. Now we can see the objects created under Java 7.1 in ABAP stack of 7.0 (SXI_CACHE).
    Now we have done all the settings to create an IDOC to file scenario. All the RFCs are working fine, but when we send an IDOC from the ECC system to ABAP 7.0, we are getting the following error 'Error while reading exchange profile for system NW' in SM58 .
    Now can anyone tell me what exact settings i have to change in the Exchange profile (Java stack of 7.1), so that the Java 7.1 & ABAP 7.0 connection is setup or do i need to change anything else.
    Thanks & Regards,
    Amit Naik

  • IDoc adapter inbound channel: Error Error while read

    Dear All
    I am sending idoc from SAP 4.6C to PI. But on SM58 I am getting an error
    IDoc adapter inbound channel: Error Error when reading
    Which is not complete because field length is 50 characters , double clicking on this message is asking for message class. How can i see the complete message.
    Can any one send me configuration detail of receiving IDOC at PI end , I don't want send to it forward from PI.

    Please clear these points.
    In PI system:
    1. Create RFC destination of type 3 pointing to R/3 system.
    2 . create Port using the IDX1 t-code port name should be SAP + SYSTEM ID OF R/3 system.
    3. Using IDX2 import the IDOC meta data in to your PI system.
    RFC destination to which direction , towards sender of IDOC ?
    Port of which system sender system or receiver system?
    What about configuration in Integration Directory , is there any configuration required on integration repository and on integration directory.
    What will be the procedure of seeing complete message on SM58.
    -->In PI system while ur creating the RFC destination of type 3 give the hostname and system number of ur R/3 system ie SAP 4.6 c.
    -->In PI create Port using the IDX1 t-code port name should be SAP + SYSTEM ID OF R/3 system and in that RFC destination option, maintaine the destinatination name which we created using sm59.
    -->coming to IR you need to create the:
                        1. Receiver data type.
                        2. receiver message type
                        3. receiver message interface. No need to create the above 3 for sender.
                       4.while mapping source is your Idoc and target is your receiver message type.
                       5. while interface mapping source is Idoc and target is receiver interface.
    -->Coming to ID no need to create sender communication channel and no need to create sender agreement.
    -->create receiver communication channel and receiver agreement.
    --->create Interface determination.
    -->create receiver determination.
    -->If message got stuck in SM58, unlock it by using double click or activate the selected message.
    Thanks

Maybe you are looking for