PO outbound interface - Issue with Unit of measure

Hi,
I am facing issue with unit of measure.
1) In the PO outbound idoc in segment E1EDP01, the unit is always converted into ISO code and sent. Is there any way to avoid it.
2) Now while changing unit to ISO code, it checks if it is preset in T006 table. Now in some of the cases like Unit FT3, there are no entries in T006 table, hence IDOC is going into error. Let me know how can this be resolved. Do I need to update T006 table if yes then how can I do it.
Thanks.
Regards,
Shahu
Edited by: shahuraj shirure on Mar 5, 2008 1:06 AM

Its always that while sending Units from SAP, it needs to be sent in ISO code and SAP always receives units of measure in the ISO unit format only.

Similar Messages

PO outbound IDOC - Issue with Unit of measure

Hi,
I am facing issue with unit of measure.
1) In the PO outbound idoc in segment E1EDP01, the unit is always converted into ISO code and sent. Is there any way to avoid it.
2) Now while changing unit to ISO code, it checks if it is preset in T006 table. Now in some of the cases like Unit FT3, there are no entries in T006 table, hence IDOC is going into error. Let me know how can this be resolved. Do I need to update T006 table if yes then how can I do it.
Thanks.
Regards,
Shahu

Sorry.. Posting it in ABAP Development forum.

Problem with Unit of measurement

Hi,
I am having problem with Unit of measurement with different languages.
Eg:
In SPRO, I am able to see the unit of measure T3 Description: (Trading unit). in SAP 200 client .the logon language is EN(english).
But if I logon into same client(200) with different language DE(german) version, I am not able to see the description in German, the description field is blank.
Kindly give me a solution for this problem as it is very urgent.
Thanks in advance.
Regards,
Shankar

Hi Aishwarya,
I can think of 2 possibilities:
1. You need to verify passing the Target UoM with the ISO Code as well as the update flag in the 'X' structures.
2. The material that you are trying to pass some UoM does not have the conversion maintained in the Material Master. (Base UoM --> Target UoM conversion in Material Master, contact Functional Consultant).
Also, if you can verify by performing the action manually and check if the Sales Order is getting created manually with the Target UoM .
Regards,
Pranav.

Error with Unit of Measure 'CAR' ISO Code

Hi gurus,
My client has EDI setup for POs for a vendor. Whenever they create a PO for a specific material with Ordering UoM as 'CAR' (carton), output is going into errors and no Idoc was generated. The error message refers to 'ME764' - "Not possible to determine ISO code for unit of measure CAR in item 00090". But, ISO code was perfectly defined for the UoM CAR (I checked in CUNI). When debugged, I found that the UoM CAR has an internal format as 'KAR' and SAP standard function module 'UNIT_OF_MEASURE_SAP_TO_ISO' is looking for ISO code of 'KAR' and throwing this error message for 'CAR'. Have you guys ever faced similar problem and any solution for this behaviour? We use SAP ECC 6.

hi
go to CUNI
select ISO codes give new entry for CAR
then save and come back in CUNI select the UOM then double click onur unit at right u will get field of ISO code give iso code here and save
regards
kunal

Issue with Level-based measure at Year level

Hello everyone,
I am facing weird issue while using OBIEE 11g level-based measure at the Year level. I am creating a trend analysis report that are displaying Expense Accounts dimension with 6 levels and 2 measures: Expense YTD, and Expense Full Year measures
The report has multiple rows with value "Others" in the 3rd level of the account dimension (Account Level 3) yet, they all have different IDs and associated with different parents (different Account Level 2 values)...
When i displaying the Expense YTD measure only results are fine and everything is perfect, when selecting Expense Full Year measure, only the first occurrence of the value "Others" in 3rd level column is displayed and non of the remaining records appears...
What makes my life worse is that i can't even see the log file of this query because an error occurs when trying to view the session log i.e. "No log file found"
Please help, i am about to start the UAT phase of the current project and i am running out of time..
Thanks
Mohamed Adel

Hi,
Are you using presentation hierarchy?
Refer below if same is followed-
http://gerardnico.com/wiki/dat/obiee/hierarchy_level_based
Hope this helped/ answered.
Regards
MuRam

Audio interface issues with Maverick

I just got a new IMac and have found that four different audio interfaces won't work with it. Most of these work with my old IMac. I've tried the Apoge Duet, Saffire Pro 24, Presonus Audiobox USB and a new Mackie mixer with USB output. The two of these that have software had lots of crashing issues. Garage band and Itunes are crashing. All of them work intermittently, but then fail with digital distortion or even Mac bluescreen (the little spinning rainbow thing).
I imagine this means I just need to return the computer, but wondered if maybe I just picked four audio interfaces that all just happen not to work with the new IMac and new OS 10.9.1

Scott, I have a 2009 Macpro runing cubase 5.0 with a Mackie Onyx firewire audio interface that has run without major flaw for almost 5 years. I upgraded to Cubase 7.5 which required that I upgrade my OS, so I upgraded to Mavericks. I am now experiencing an unlimited number of dropouts, studders, clicks, and pops That make my$25,000+ studio virtually useless. I called Mackie, because my version does not have a driver as it is the older (non 1640i) version. They said that this version runs through Apple's core audio driver and there was really nothing they could do to resolve the issue (probably why the new 1640i has its own independant drivers). While with troubleshooting, the problem could still be a Cubase based problem, the forums I have read have shown problems like this occouring across a wide swath of different DAWS and audio interfaces. I believe the problem to be on apple's end, and specifically in some failure in Mavericks itself. I tried to call Apple about this problem, but apparently because my macpro is out of warranty they wanted to charge me $20 for my phone call (my Mackie is older than my studio computer, and though they couldn't solver my problem, they took the time to field my call free of charge). I believe what is going on is that they are using the free version of Mavericks to BETA test their OS, and will correct the issues as the complaints roll out. I am going to try and Install Mountain Lion on my computer and see if that solves the problem. It's only $20, and that is the cost of the support phonecall anyways. I'll tell you how it works out.
To the moderators,
I have been loyal to apple for over a decade. I currently own a 2009 Macpro, a 2011 macbook pro 17", a 2013 macbook pro 15", and a plethora of your gadgets. I have spent over $30,000 on apple products, and to charge me $20 for a phonecall for a issue that is most likely internal, and probably has a relatively simple solution is infuriating... Needless to say, the next time I spend $5-$10K on a studio computer, it will most likely not be an apple unless you resolve these issues. Thank you.

Is anyone else having interface issues with words with friends or draw something?

I try to use these apps and the interface acts frozen

I just called today and we figured out what the issue was. For some reason back when I had purchased my MacBook my Apple ID didn't have to be an email address. When I set up my new pad, it had to be an email address for the user. For some strange reason that is hat caused the issue. Even though the two were not synced yet. I hope that possibly helps out another.

Issue in unit of measure

Hi,
Suppose I have a material whose base UOM is "SHT" and order UOM"Kg".
The system converts the qty of material received in Order UoM as per the conversion factor maintained which may differ from actual qty in Order UoM charged by the supplier in his invoice.How can I solve this issue

Hi Indraneel,
Please check on the Base UOM Decimal and Order Unit Decimal. You might need to change (increase decimal rounding) the Decimal rounding for the Units using CUNI.
e.g. If you are maintaining a decimal rounding off 2 decimals, then the system converts and rounds off the qty. Try to increase the decimal rounding off (say, 4) of the UOM and see this problem gets solved.
or Please list out the complete scenario.
Best regards
Amit Bakshi

Issue with OBIEE 11g measure columns

Hi,
Recently one of our application got migrated from 10 to 11g. post migration we had patched 6.1 and 6.2.
measure column defined in RPD were working fine in 10g and 11g(after patching) as well. Suddenly all measure columns are behaving abnormal.
Even though the measures are defined at particular level, the values are getting summed up and displaying the same for each and every dimension entity.
Simply bifurcation is not happening according to the dimension in all the reports.
c1 c2 c3
a x 2
b y 2
c z 2
Any guess?
Warm Regards
Kishore Panuganti

Check the physical query for group by clause cols, and check for those columns levels.

Issue with Level-Based Measure Calculations

Hi all
Edited by: aharrab_be on Jan 19, 2009 7:23 AM
I've just understood the meaning of those level based measure and It's not very useful for this purpose
Sorry
Edited by: aharrab_be on Jan 19, 2009 7:24 AM

Hi,
Are you using presentation hierarchy?
Refer below if same is followed-
http://gerardnico.com/wiki/dat/obiee/hierarchy_level_based
Hope this helped/ answered.
Regards
MuRam

Unit of measure issue

Dear friends,
issue : for Unit of measure EA , decimal is allowed. i.e in sales order or PO system will allow 10.334 EA . I need it without Decimal.
issue resolution status: I have maintained NO decimal in T code CUNI for UOM EA. But till sytem allows Decimal . I tried with Fresh PO, SO, MB1C etc .
Please help me to resolve .

HI
In CUNI under Display area for Decemial Places see what is the valid number range maintained .
I think it is 0-14 , then input 0 instead of NO and try again

Unit of measure issue in Product Category Units Quota Planning

Hi experts,
My client needs to maintain quota for salespersons based on R/3 product hierarchy level. (1000 kg of Product Hierarchy Level 01234 per month, 2000 KG of Product Hierarchy Level 56789 per month, vs.). R3PRODHIER is the category assigned to Sales application.
So in Quota Planning, sub-assignment block Product Category Units, I want to maintain quotas. I press Add button, mark the Hierarchy level I'd like to plan quota to, and press Choose button, but "Unit of Measure" field does not fill up. Surprisingly, in the dropdown list, there is not an option which I can select (i.e. 'KG'). The list is empty, even after I fill Q1, Q2, Q3 and Q4 values. So, I am not able to use the quota planning functionality.
Any ideas why this is happening and how to fix it?
Thanks for your time,

Hi Kivanc,
I see exactly one year ago (almost to the minute) you posted this solution.
I am having exactly the same issue as you had. I also assumed the problem lay in ECC with unit of measure having to be defined at that same level.
I have asked our SD team about this and they are not maintaining units of measure at higher levels of the hierarchy, only on the product itself.
Our units of measure will be EA, TO, KG
So how do I get around this? I don't completely understand what you have explained in your solution.
Regards,
Kendal

Problem with Outbound Interface for Party in Standard XI Content for SNC

Hi All,
I am configuring a standard XI Content for SNC, the ASN Processing (DIMP ERP Backend). The provided Integration scenario involves three swim lanes which corresponds to an ERP, SCM and an external system. The external system is as an application component that is designed for B2B communication, i.e. a service with party which is called Supplier.
The first action within the scenario is Create ASN in the Supplier swim lane and send a message to the action "Receive ASN and update inventory(in transit)" within the SCM system swim lane. I have created a sender party that corresponds to the Supplier swim lane and also a receiver party that corresponds to the SCM system. I used the Integration Scenario Configurator to assign services and also all the comm. channel. However, when i try to generate the logical routing objects and collaboration agreements, i get the error message that there was no outbound interface associated with the sender(the external system) defined for the first action. There is no option within the Integration Scenario Configurator on how to assign/define the outbound interface that I want to use for the sender.
I have no idea how to assign the outbound interface to the action for the Supplier swim lane in an Integration Scenario that is from an XI Content. Has anybody configured something similar or come across the same problem? Any info will be much appreciated.
Luqman

Hi,
This could be the problem of confilting namespace or combinations.
in receive action just check that right message interface is configured at Inbound side.
just check any place void ?
1)just check the name as case sensitive.
2)Just check is there interface belongs to right software component.
3)Just check mapping assigned to the right combination or not.
its better to cross check all the component are assigned to right place or not.
****if helpful then rewards points
Regards,
Sumit Gupta

Unit of measurement error

i
hi guys
crested po with unit of measure kg and also made migo,miro and RFQ but now when i change unit of measurement from kg to pc in material master there is error
the base unit of measure cannot be changed choose display errors
1 if there are no stock of the material in the current period and in the previous period if there are stock in the previous period you can clear them as follow
-post the stock in the previous period to the current period so that the stock for the previous period is the same as the stock for the current period
-clear the stock with the posting date in the previous period
-if no purchase order exist for the material
i have already made po migo,miro, RFQ , please can you guide me step by step how to change the unit of measurement
thanks in advance

Hi
Goods issue the particular material to some cost center. Then there will not be any stock for the particular material. Then change the UOM.
It will work out.
Then reverse the Goods Issue.
Regards,
Raman

Conversion of alternate unit of measurement

Hi,
System will not allow to enter conversions of unit of measurements in decimal points. But is there any configuration or method, we can force system to accept conversions of unit of measurements in decimal points only? (For example 2.5kg = 1pc, base unit of measurement is 'PC' and alternate unit of measurement is 'KG')
Regards,
Sattuj

Hi,
For the given example of Alternate conversion you can use the following setting :
2.5 Kg = 1 Pc
Put the Values as :
25 Kg = 10 Pc
With this the objective of Decimal is achieved.
Please check the following posts for more info :
[Re: variable order unit]
[Re: Base Unit of Measure]
[Re: Issue in unit of measure]
Hope it helps,
Best regards
Amit Bakshi

PO outbound interface - Issue with Unit of measure

Similar Messages

Maybe you are looking for