PO output , address problem..?

Hi experts
In my PO print the Pincode in flowing wrongly.
Where i can correct this pincode ..?
Please note it down, My company is ABCD , for X vendor i raised PO.
The pincode is not flowing for ABCD company in PO print , where i can correct it ..?????????
Thanks
SAP-MM

hi
In SAP ME71 transaction does not exist.
Can u give me other transaction code where i can trouble shoot my Pincode problem in printout-PO.
Which transaction code we 'll be maintaining the hardcode of Pincode number for our commpany code .
Thanks
SAP-MM

Similar Messages

EMAIL output type problem

I am having problem in executing email output in order.In customer master email address is mentioned correct.But from order when I am executing the email output its going to some the customer email address not the one which is mentioned in the customer master.Can anybody tell me why it is happening??

Dear Chakri,
As per my thinking this the cause for your problem so please check regarding that,
Go to VA02 transaction there you enter your Sales order no which is in the problem ,then click on sales document (at top of the left corner) --> Issue output to , system will take you to output popup screen there you click on print options it will take you to details of the issue output, there you check who is Recipient of that output at Recipient field and medium of the output.
If recipient is different change the recipeint to whom you wan to send the mail.
I hope it will help you
Thanks,
Murali.

Connecting to wireless - IP address problems, netcfg and iwconfig

I have been running into some baffling problems when connecting to wireless. I regularly connect to an unsecured wireless with a hidden essid connection that then has some kind of ssl login.
here is the info for it:
sudo iwlist eth1 scanning
Password:
eth1 Scan completed :
Cell 01 - Address: 00:15:6D:AB:A4:2A
ESSID:""
Mode:Managed
Frequency:2.412 GHz (Channel 1)
Quality:1/5 Signal level:-81 dBm Noise level:-91 dBm
Encryption key:off
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
48 Mb/s; 54 Mb/s
I can never connect with netcfg, i use the "wireless" profile as follows:
CONNECTION="wireless"
DESCRIPTION="auto connect to wireless node"
INTERFACE=eth1
SCAN="no"
SECURITY="None"
ESSID="any"
IP="dhcp"
if i do execute:
sudo netcfg wireless
then i get this:
:: wireless up
[BUSY] dhcpcd: timed out
- DHCP IP lease attempt failed.
[FAIL]
the only way i can connect is if i do a:
sudo ifconfig eth1 up
sudo iwconfig eth1 essid ""
sudo dhclient eth1
if dhclient doesnt connect, this is what it says:
sudo dhclient eth1
Internet Systems Consortium DHCP Client V3.0.6
Copyright 2004-2007 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/
Listening on LPF/eth1/00:21:00:05:e1:23
Sending on LPF/eth1/00:21:00:05:e1:23
Sending on Socket/fallback
DHCPREQUEST on eth1 to 255.255.255.255 port 67
DHCPREQUEST on eth1 to 255.255.255.255 port 67
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 7
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 21
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 19
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 14
No DHCPOFFERS received.
Trying recorded lease 172.16.112.36
PING 172.16.112.3 (172.16.112.3) 56(84) bytes of data.
--- 172.16.112.3 ping statistics ---
1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms
No working leases in persistent database - sleeping.
oftentimes i have to do dhclient multiple times (the same goes if i try and use dhcpcd)...can someone explain why this happens?

I am having the same problem on a network with a signal Quality: 5/5.
I used to use wicd without problems (pre 1.6.*). About a month ago I started having problems with wicd. At first I had trouble getting wicd to start, but after updating to 1.6.2 that problem went away. I then starting having problems with connecting to the network. It would show that it was connected and then disconnect after a few seconds (may have been a problem with dhcp). When I started having problems with wicd I decided to wait for an update to fix it, so I don't know if something else changed during that time that might be causing this problem.
Last night I decided to try netcfg. I following the directions on the Arch wiki and it worked. I connected to my WPA network with DHCP and was able to surf the net. I then tried disconnecting and reconnecting, just to be sure that everything was working. Ever since then I have been getting the same
:: wireless up
[BUSY] dhcpcd: timed out
- DHCP IP lease attempt failed.
[FAIL]
that was mentioned earlier.
Since this appears to be happening with both wicd and netcfg, is it possible that this is a problem with the driver? I am using the broadcom-wl driver and the output from lspci is
0b:00.0 Network controller: Broadcom Corporation BCM4328 802.11a/b/g/n (rev 05)
Thanks

Invalid address problem. How can i Fix this.

Hi, basically I am trying to send an email using the mail-service.xml config file from jboss. Below is the configuration for my mail-service.xml .
<server>



<mbean code="org.jboss.mail.MailService"
name="jboss:service=Mail">
<attribute name="JNDIName">java:/Mail</attribute>
<attribute name="User">[email protected]</attribute>
<attribute name="Password">password</attribute>
<attribute name="Configuration">

<configuration>

<property name="mail.store.protocol" value="pop3"/>
<property name="mail.transport.protocol" value="smtp"/>

<property name="mail.user" value="[email protected]"/>

<property name="mail.pop3.host" value="pop3.nosuchhost.nosuchdomain.com"/>

<property name="mail.smtp.host" value="mail.daily.co.uk"/>

<property name="mail.smtp.port" value="587"/>

<property name="mail.from" value="[email protected]"/>

<property name="mail.debug" value="true"/>
</configuration>
</attribute>
<depends>jboss:service=Naming</depends>
</mbean>
</server>
The problem is as follows. Everytime I try to send an email, I get the following error:
15:59:59,392 INFO [STDOUT] 250 Reset OK
15:59:59,392 INFO [STDOUT] javax.mail.SendFailedException: Invalid Addresses;
nested exception is:
com.sun.mail.smtp.SMTPAddressFailedException: 550 You must give your username and password to send mail through this service
I made sure that the email was in a valid format i.e [email protected] . Below is the code I am using to send the email:
String serviceName = "java:/Mail";
Session session = null;
try {
InitialContext initialContext = new InitialContext();
session = (Session) initialContext.lookup(serviceName);
} catch (NamingException e) {
e.printStackTrace();
Message msg = new MimeMessage(session);
InternetAddress[] addressTo = new InternetAddress[recipients.length];
for (int i = 0; i < recipients.length; i++) {
addressTo[i] = new InternetAddress(recipients);
msg.setRecipients(Message.RecipientType.TO, addressTo);
msg.setSubject(subject);
msg.setContent(message, "text/plain");
Transport.send(msg);
Can someone point me in the right direction at what I am doing wrong. Every configuration details should b read from that mail-service.xml file. Why is it throwing an invalid address then a username and password error ?
Many thanks

looks like the problem was to add the the mail.smtp.auth and set the value to true in the mail-service.xml . The error logs just did not make any sense. Well fixed now!

Goods reciepient and Requestor address problem

Hello Guy's ,
I have a problem in PO output. When PO's are send to the vendor the Goods Recipient and Requestor Add: is incorrect and needs to be changed. I tried to find from where the address is being picked up but i'am unable to find the address details.
I checked via BBP_PD under Goods reciepient and Requestor and i could see the address no: 10611 and the Ship to address is 50373 which is correct.
But the user wants the addr no: 50373 to be printed under Goods reciepient and Requestor on the PO instead of 10611.
When i checked attribute Addr_shipt its been maintained to 50373. But i could not find 10611, then i checked table ADRC and there too i could not find the address no: I have checked table HRT1222 to see where in the org structure this add is maintained but was unsuccessful. I also checked the smartform logic which has two conditions and as per the condition what the system is doing is right. but i cannot see the address no: 10611. Can anyone help in finding this.
As i need to change address no: 10611 to 50373 for PO output.
Please advise.
Rgds
Saj

Hi
in adrc table all addresses are vailable include.
for eg.
20 partner function crmd_partner table you can find adrc - for good recipient
27 partner function crmd_partner table you can find adrc - for delivery point
you must find all addresses number in adrc table.
i think you can swap if you want or override in doc change badi either sc, po method.
but in your PO form GOOD RECIPIENT as well as DELIVERY POINT address will be same.
br
muthu

Delivery address problem.

Hi guys,
Thanks a lot for your earlier responce.
I posted earlier message just to make sure that i am picking the correct address no, as i am facing a very strange problem.
i am passing adrnr(plant) as parameter to ADDRESS function in sapscript and passing country code as GB. the problem is the function returns me the region along with the country, but in reality the region is not assigned to the plant and the region returned is that of vendor.
if I remove country from the output line, then it is ok, but as soon as i put country in output line in form, region(that of vendor) is displayed in the output
please help me to understand what's going wrong.
please give your views what could be wrong. I had debugged the program and form.
Thanks
Lakhbir

anyone with a solution to my problem
Lakhbir

I just used the "find my apple id" and it has an id to my old email address problem is when i try to login to hotmail with that account it says the email address doesn't exist..and this is affecting my application updates and purchases.

Please help!
I dont know how the email address doesnt exist and how it can still be an apple id but not let my access my purchases or update old appplications
thanks,
Kiah.

Hey Chris, thanks for your reply.
The problem is that i have 2 apple Id's now and i used on to purchase my macbook pro a few years back and then i created a new one for my new macbook.. i was trying to update my iphoto and imovie but it kept saying i couldnt update it as it was purchased under a different id, and seeing though i cant get into my old account i cant update what i need to. i know the password for the old one as my brother still uses it but it wont work now as hotmail says the email doesnt exist.
in saying that i dont think i can get into the old account and change the email address

Output having problem in PO

Hi,
Don't know whether you come across this problem but I hope you can shed some light as to why my PO documents are unable to trigger and to retrieve the output condition despite that I have enter the condition record in MN04?
I checked NAST table, and I notice that many PO documents with this output type were able to retrieve this output previously.
Some extra input:
1 - This is stock transport order purchasing with item category of U
2 - it is a Z report with copy version of NEU.
Please help.
thanks
Tuff

Hi,
If you have done all customizing setting for PO output type & maintain condition record for message type in t.code : MN04. Now Just fine tune the output (message) type in following path:
SPRO>MM>Purchasing>Message>Output control>Message tyoes> Define message type for Purchase Order-->Fine-Tuned Control: Purchase Order
Now here select the check box corresponding to your output(message) type to have print output for this message type is automatically displayed & save.
Now try creating PO/STO & you will have default PO out put message type.
Regards,
Biju K

Apple verify email address problem :(

I have a bought a IPhone 4S and I wanted to sign up for itunes. I have done everything. A verification mail is sent by apple but when I linked to the web site given and write my ID (I think it is my mail) and password, I got a message "This email address is already in use or you may already have an Apple ID associated with this email address. Please try again or sign in using your existing Apple ID."
I cannot install sth without it please help me what can I do for overcome this problem

I have the same problem.
And another people with me have the same problem to.
We are wainting for a fix very fast!
Thank you.

Self-assigned IP address problems

I'm having a problem with my wireless router connection (my Airport card shows the network, but the "fan" is greyed out, and if I choose the network it still doesn't connect - When I check network status I get "AirPort connected to network, but has self-assigned IP address and may not be able to connect...)
I can temporarily fix the problem by going into System Preferences to Network to Airport to Preferred Networks to Assist Me and THEN it will go to my network and turn on the path.
I'm running Tiger 10.4.11 on a G5 iMac with the original AirPort Extreme card, and routing through a Linksys WRT54G attached to a cable modem.
There are a lot of networks in my area, according to my wireless "fan".
If changing channels on my router might fix this, I'd like to give it a try, but I don't know how, AND I don't want to ruin the signal to the other computers in the house, which, by the way, work just fine when the iMac loses the signal.
If there's another way to tell the router to ignore the self-assigned IP address, or to get the AirPort to stop providing this ...
The problem is obviously the self-assigned IP address. The question is what is causing this?
Is it the AirPort Extreme Card?
Is it the Linksys Wireless router?
How do I test to see which it is, without losing the signal from the router to the other computers in the house?
With so many people having the same problem, there must be an answer somewhere.
Can some kind soul please point out the correct path? My tech support (teenager) will be home from college this week, and if I can prove to him that it won't ruin everything I think he'll be up to the challenge.

Hi,
Thank you Linc & dwb, I've had no issues with the router in the 14 months its been installed. But tonight I've turned off the NAS and since then no drop off for wifi/ or assigning itself an IP address.
I will switch on the NAS once again and see what happens, would it be best to assign a static IP to the NAS? One thing I have found when checking the homehub connection details, the mac air connects at the 5Gz Wireless as does the Kindle, which has also suffered from losing the wifi connection, where as my macbook pro only connects at 2.4Gz and like I said has not had any issue. Not sure if this anything to do with the problem or not?
All I do know is that since the NAS was introduced then the problems began, so again not sure if its the NAS impacting on the router or a router setting?
thanks

Self-assigned IP address problem - My solution

I am new to this board and created an ID just to write this post. When I searched for this self-assigned IP problem, I found almost 1 million results on Google so obviously I am not alone.
I have this problem off and on on the wireless network at home with a Netgear router. It has never happened at my office with a D-Link router. Never happened at Starbucks or McDonalds (yes, they all offer WiFi here). But it happened at one Pizza Hut and it also at Christchurch airport about a week ago.
Deleting one of the plist files worked once at home many months ago but this week nothing worked. My Mac usually goes back to normal by itself after I "****" it out at other WiFi networks but not this time. As a last resort, I asked my brother (our family's I.T. guy) to change the router as I had not tried that fix. He didn't do it but a day later, he gave me to oddest solution that worked in a blink of an eye.
The solution? Key in a wrong password!!!
1) Go to Keychain Access, delete the keychain for the problematic network.
2) Connect back to the network
3) Enter a WRONG password that is similar to the right one. For example, if your password is Apple123, try APPLE123. You should still connect to the network and get a self-assigned IP.
4) Repeat Step 1. To be safe, you might want to re-boot now. I did but probably didn't have to!
5) Repeat Step 2
6) Enter the right password
I'm not all that techie so all I understood from what he said was:
1) It's probably a non-Apple router bug
2) It's a hex key problem. The password wasn't being encoded/decoded properly so the router wasn't assigning the computer an IP address. Wasn't even reading the password which is why I could connect with a wrong one.
He deduced that from reading a post from a guy in Spain who thought he had carelessly entered the wrong password and was wasting the community's time with his posting. I had read that post a couple of days ago too! But obviously I thought the Spaniard had just entered the wrong password and there was no fix for me to try out. My brother is a genius!
I guess it then makes sense why fixes like:
1) Disabling the firewall
2) Deleting preference lists
3) Deleting keychains
4) Changing the router
5) Renewing DHCP lease
6) Resetting the router
...have worked for many people and not others. None of them actually fix the cause of the problem. Having searched for 3 days, I could not find the REAL reason why this happened. Personally from all I have read, I think it must be a hex key problem with Netgear and Linksys routers. I see those 2 names mentioned a **** of a lot. Maybe it's another one of those gadgets built more for PCs that don't work perfectly with Macs all the time. We used to have an Apple Airport Extreme base station but that got fried by lightning. It was not cheap.... So technically, it really isn't Apple's problem. I think if we used an Apple router, we wouldn't have a self-assigned IP address. Maybe that's why they haven't "fixed" the problem after so many years.
Anyway, let me know if my brother's fix worked for you.
This is my good deed for the weekend! Goodnight....!

Hello, thanks for the tip/post, & a warm welcome to the forums!

Report Output Saving Problem

I am using Oracle Developer6.0 . I am facing problem with reports. I am invoking reports from form using run_product.
1. I could not able to save the report in text file . Whenever i try to save the report output in a text file.It gives dump and application get closed.
2. In RTF format , it execute the query which i have given at the design time while creating a report . But while running i am passing query either through lexical parameter or passing value of where criteria user parameters. It display the output for the specified value. But when i save this report output in rtf file . It execute design time query and save that in a rtf file.
If any body is having any idea about it . Please let me ASAP . It is very urgent for me.
Thanks in advance
null

Hi ,
Why don't you try the output in PDF. Its been working for us. We don't have any problems
Good Luck
Rao

XSLT HTML output escaping problem

I am having problems with JAXP XSLT output escaping in HTML. I have an XML document which correctly escapes &, <, > etc (eg: &amp). However, when I transform the document the XSLT processor is escaping these values again. This means that the HTML output contains & where the XML document contains & (for example). Surely correctly escaped characters in the XML should be left alone? Or should the XML document not contain escaped characters? In my understanding special characters in text nodes of XML documents should be escaped. Obviously a work around is to disable output escaping on these nodes but that is a real pain to have to do each time you pull a value through from the XML document. I'm confused as to what format the XSLT processor expects the XML to be in in relation to escaping of elements. Any information gratefully accepted!
Thanks.

Sorry! I was getting confused - the special characters were being escaped twice before they reached the XSLT processor. It looks like the processor will leave alone escape sequences that are already in the XML when it transforms to HTML.

IMessage contact address problems

I am a little perplexed about how to set up iMessage correctly.
I have iMessage activated. My settings are that "I can be reached by iMessage" at my phone number and email. I "Start new conversations from" my email.
The first problem I have is when I talk to my girlfriend (she has an iPhone). I frequently have two different iMessage threads with her and it is very frustrating. In one thread, if I click on her Contact info it highlights her phone number. The other thread, it highlights her email. Its annoying to not keep everything in one unified thread. Is there anyway to do this? Is the problem on her end or my end?
Keeping the above problem in mind, I would also like to unify my iMessage with my iPad messaging. I get this to work sporatically, but I would like it if I could consistently see all my iMessage conversations in my iPad as if I were looking at my iPhone. My girlfriend also has an iPad (although she hasn't been using it for messaging) so I would like to be able to set up the same for her.
I just don't understand the need for separating iMessages into two threads depending on the address. It would seem to be easier for everyone if you just kept it unified based on the name.
Any help would be greatly appreciated.

Hi, did you ever fix this problem? I'm having the same issue.

Output Preview Problems

Hi All,
I have recently been having problems with the Output Preview in Acrobat 11 and it's driving me crazy.
The output preview is not reliably showing the correct CMYK Colour values - see below
I have created a sign in Illustrator CC 2014 and printed to PDF using the 'Press Quality' settings. I have ensured that all Adobe software is using the same profile (North American General Purpose 2) by setting it Bridge.
I import the PDF into Photoshop and get a yellow value of 100%
I then open Acrobat and check the same area and get a yellow value of 97%
In Acrobat I open Preferences > Colour Management and change the colour profile from North American General Purpose 2 to something else and then back to North American General Purpose 2. I check the yellow again and get 100%
Has anyone else had this issue? If so, how did you fix it? Many thanks in advance.
Kind regards,
Christian.

I think you are measuring the image preview from Photoshop when you open your rastered Photoshop file in Acrobat. You should probably save your original Illustrator file as a PDF (not print to PDF). When you open the PDF in Photoshop, you are converting your vector file to an Image, which I think also creates a low-res preview of the actual image (which has various uses). If you check your Photoshop preferences, you might be able to turn the preview creation off, but I really wouldn't worry about it. As a test, save your original Illustrator file as a .tiff and see how that works. Unless you are adding something in Photoshop that can't be added in Illustrator or InDesign, it's usually better to keep everything vector, as much as possible.

PO output , address problem..?

Similar Messages

Maybe you are looking for