PO output Condition record changes

Hello Gurus,
Is there any way to view the changes made to the condition records used for PO output types.
Best regards,
MK

Hi,
Please find the below points:
1.You dont find any log for the out put condition records in the tables CDHDR and CDPOS.
2.You can able to see the records in the table NAST
3.NACH table gives initial creation of the condition record
4.Change logs.willbe activated the table name you have entered in the condition table and set the the log indicator in the t-code SE11.

Similar Messages

  • Trace changes to Output Condition Records MN05

    Hi Friends
    Is there any way to trace changes to Output Condition Records made via MN05 ?  NACH table gives initial creation of the condition record, date of creation, User ID of who created it, etc.  This table also displays the updated changes but not the change history, as to who changed and when it was changed.
    Thankyou
    Francis

    No these changes are  not logged in CDHDR and CDPOS.  there, only expected changes are logged, means there is a program part in the application program that is resposible to write this change logs.
    In this thread we are speaking about table change logs. Hence the table name you have to  enter is the condition table for which you have set the log indicator in SE11.

  • How to know if an output condition record is ever used in sales docs

    All,
    I can see some output condition records in table B001. Additional detail of these records is in table NACH. But is there a way to know whether these condition records are determined in any sales docs?
    In individual sales documents, I can manually check what condition records are determined from the 'output determination analysis' screen. Here I can see the number of the condition record that the system has determined. But is there a table which links sales document and output condition record? (equivalent of KONV)
    Thanks & Regards,
    KC
    PS: Table NAST stores transaction data but only the output type and sales doc number is shown but it doesn't show the condition record (though it can be checked manually).

    Hi Krishna,
    Depending on the version of SAP you are using there is a transaction i think it is VA70 in ECC6 or in 4.6 there is a standard program for mass printing from a sales order.
    You can use this tcode/program the very same as VL71 for deliverys and enter in your output type and change the processing mode to 2 and execute from here you can see if it was ever printed
    Regards
    Paul

  • Output device for output condition record

    How can i make an output device a required entry when creating a new output conditon record? 
    Example:  When going into VV31 and setting up new output condition record, I am trying to force user to specify an output device. 
    Can some one let me know if it is possible to do?
    Thank you.

    Hi
    Write a Field Exit for that field
    and trigger a error when it is not filled , such that the user always enters it.
    Reward points if useful
    Regards
    Anji

  • Default Output Condition Records in SD

    How do I maintain default output conditions in SD when I create a new customer? As of now, whenever I create a new customer, I have to create output condition records for quotations, sales order, shipping and invoicing. Thank you, Pravin

    Pravin,
    It depends on the fields in the condition table.
    If you have customer no., then for each customer you have to create a record.
    But if you have a field e.g. customer group, then assign the customers to that customer group and output will work.
    Paste the condition records, table NACH, for your output condition type.
    TW

  • Excise duty 4% diff. while MIRO posting after FV12 condition record change

    Hi Gurus,
    Iam coming straight to the CRUX of the matter.
    Iam working for a client and facing a support problem.
    I got an issue that recently Government has reduced excise rate from 14% to 10%
    But PO already created with 14%.Later the condition record changed to 10% in FV12.
    then only  MIGO posted.
    while doing MIRO iam getting 4% difference value
    why is it so?
    Please help me in this regard.
    I also attached the screen shot in the link given below
    [http://rapidshare.com/files/184718013/MIRO__ED__14_.rtf.html]
    Regards,
    Anbu

    HI
    Check your PO creation date and condition record validity date (FV12) an MIRO posting date.
    Thank You

  • Maintain output condition record for KONS

    Dear all friends,
    Anybody help me to maintain output condition record for KONS during consignment cycle.
    when,where and how i can maintain the output condition record for KONS
    thanx in advance.
    best regards,
    Rajesh

    use MRM1 t-code for KNOS.

  • Database table for output condition records

    Hi
      Can anyone let me know " in which database table the condition records of output type will get stored?" . please let me know the table names related  to output.
    Thanks in advance

    Hi Srinivasarao,
    Check the table <b>TNAPR</b> in SE16. It will have all the output condition records assigned through transaction NACE.
    You can find the output types in the field KSCHL of TNAPR table. It also consists the output type and the layout and print program assigned to the the output type.
    You can see the list of processed document through output types in the table NAST.
    Thanks,
    Vinay

  • Table  for Output condition record's data

    Hi
    In which table are the values of an output condition record stored?
    Regards

    go to the desired tcode  in display mode ex:"VV33" to see that condition type tables, then give ur condition type and press CONDITION INFORMATION button in application tool bar and u reach one screen and press "execute" in application tool bar  and u reach one more screen and in that screen press "control+F8" then u can reach one more screen there it dispalys the desired table of urs.
    reward me if it is helpful.

  • Shipment output condition record

    Hi all,
    The Shipment output condition record is maintained which can be seen in T code VV73(V7 application)
    This is stored in the table B999.In this table iam getting the condition record number but there is no condition record creation date
    I want to know when the condition record was created.Which table can i get this Info
    Thanks in advance
    Regards
    Mano

    Dear Mano,
    Go to SE16 transaction enter NACH table then press enter system will take you to the selection screen here you enter Application as V7-Transport and enter your shipment output type then execute now system will give data details in that table in that you can find the Created on colomun which is relevent to created date.
    I hope this will help you,
    Regards,
    Murali.

  • Error when maintaining output condition records

    Hello experts
    I m getting an error while maintaining output condition records using VV11. The error reads as "862     System error: system cannot read the structure for table B567". Can you pls help in identifying the root cause.
    I checked that the condition table 567 has he correct fields and the field catalogue has the fields.
    Thanks
    Regards
    Srikkanth

    Hello
    Try to regenerate the condition table B567 using the report RV12A001.
    Use TCode SE38, select usage 'B', table '567' and mark the boxes for following indicator
    - dictionary
    - reports and screens.
    Press execute and re-try by maintaining VV11 for the output.
    Regards
    JP

  • Sales & purchase output condition records

    Hi ,
    I am asked to develop a query for the sales output condition records and the purchase output condition records.
    Can someone help me with the details like tables and the selection I can make to test them ?
    Please help me with the transaction code for the same too.
    Thanks in advance.

    You can use transaction NACE to display condition records.
    Execute NACE > Select Application V1 - Sales from list > then select button 'Condition Records' > select output > select key conbination > then report will occur with Slection.
    You can do the same steps for Application EF - Purchase Order
    If you wants to find out tables you can go to respective reports and find tables given in program under statement TABLE
    For sales there are tables for different key combinations like B001, B915, B520, B511 etc. for Purchase Order tables like B025, B504, B027 etc basically tables starts with B*
    I am not sure why you need to develope query because these reports gives list of condition records maintained for particular output.
    Hope it helps !!

  • MN04 - Output condition records.

    I Tried to create output condition records for vendor but failed with error message ""transportation is not defined for master data", can refer following steps.
    Please advise what's the problem, and whether (and how) can be fixed .
    1.in transaction MN04/Create Output-Condition Records:Purchase Order
    2.choose Z011 from dropdown list at Output Type field
    3.choose "Purch.Org./Purch. Grp/Doc. Type/Vendor"
    4.input all required fields as attached file "fast entry"
    5.then input all required fields as attached file "communication"
    5.click "save" button, error message "transportation is not defined for master data", detail please refer to attached file "error message".
    Kindly guide me in this.
    Regards,
    Monica

    Hi
    Yes thats true that Master data cannot be transaported.
    this message is a information message only. You can go head in saving the data.
    Is it coming in red or green
    Thanks & regards
    Kishore
    Edited by: Kishore Kumar Chiluka on Apr 17, 2008 12:42 PM

  • Output Condition Records

    Hi,
       I need to upload Output Condition Records For SD. The Xtion is VV13 but currently i am unable to find any standard object for the same in LSMW. The CONDITION object looks to load more of Pricing condtions. Has any body worked ont the same and guide me how to do the same. Teh number of records is around 300.
    Regards,
    Gurpreet Singh.

    Hi...
       While craeting the sales order condition types are depends on Pricing Procedure.
    You can find this pricing procedure form haeder sales tab of that sales order.
    With that pricing procedure you can see all possible condition types from V/08 transaction.
    And V/06 transaction is also very help ful to decide which condition types we can give mannaully.
    Plz open this threads...,
    Sales order creation, Line item error
    Condition types in Sales order creation process
    And get back here with your experiance.,and issues..,
    Thanks,
    Naveen Inuganti

  • Maintain output condition record for material documents

    Please help me with transaction code to " maintain output condition records" for material documents

    Hi,
    Is it MN21 transaction you are looking for?
    Cheers,
    HT

Maybe you are looking for