PO Output message triggering even when it is on HOLD status

Heelo SAP Gurus,
I have come across a issue where the PO output message is triggering even when the user puts the PO on HOLD status.
It is happening randomly i.e,not for all POs.
Plesae guide me on this
Santosh

hi
check your customizaton setting for the output type triggering event also settings

Similar Messages

Noise in PID control output at 100% even when constants used as inputs

I am using the PID toolkit to control valve movement in a system. We are having an issue with large output fluctuations (~4%) when the valve is controlled completely open, PID output 100%. This does not occur when the valve is controlled completely closed, PID output 0%. We thought it might be caused by noise in the SP or PV signal but it still occurs even when constants are used for these variables. The output range for the PID.vi is set to 0-100%. Has anyone seen this before and if so how do I prevent it from occurring? Thanks,

The PID output is going between 96% and 100% when I think it should be 100%. For example if my setpoint is 5gpm and the process variable is 3gpm I would expect the the valve to open to allow more flow. If I set the SP as a constant 5gpm and the PV as a constant 3gpm, I would expect the PID to move to 100% and stay there. But it fluctuates rather than remains steady. We are using a cRIO to output 4-20mA signal to several control valves.
I know that my other post is mostly a repeat. Our internet timed out and I thought I lost my original message. I have not seen a way to remove the duplicate. If you know, please tell me. Thanks,

PO Output message triggering for change in PO

Hi,
We have configured a output message type for PO create . The output message is defiend for condition record doc type, partner as LS and medium A(ALE) and partner name.
Once PO is created the output is getting triggered and idoc created.If I make any changes in PO agai the same output message type si getting triggered and new idoc created. This shud not happen.
I checked , the idoc message type ORDERS n its assigned to only ME10 code .
Cheked all the settings of message type and fine tuned is also not maintaiend.
Please suggest .

Hi
under SPRO > MM > Purchasing > Messages > Output Control > Message Types > Define Message Types for Purchase Order > Fine-Tuned Control: Purchase Order - check whether your output type is added with operation 2 (change)
Thanks !
E.Avudaiappan

Slow reaction when texting or typing messages, and even when I put in my passcode number. Gets slower every time I sign in.

Everything else is working fine since I've updated the phone to the new iOS7, but when I am texting or emailing, or even putting in my passcode, the reaction on the screen is very slow, and I have to wait a few seconds between each word. Is there anyway to fix this? As a writer, it's going to drive me crazy for sure!

Just found the solution, buried in another list of questions. I went to settings-General-Reset All. Doesn't remove any of your info, but it resets everything to work properly. Hopefully, this will be helpful to someone else having the same problem.

Measurement output keeps drifting, even when the input channel are shorted out.

Dear Technical Engineer,
Greetings!
Currently, we are conducting a voltage measuring experiment with your DAQ card "NI PCIe-6353". The voltage we are concerning is a slow variable ranging from 0-20mV.
However, we met some problems operating your device.
1.When the input channel is vacant (no connection to any voltage output), the measurement curve displayed in the test panel (built in your driver) keeps drifting (from some point to -10V, then slowly upwards to +10V, then downwards...), but not stays at 0V.
2.The moment we connect the input channel to a DC stabilized power supply (2V), the measurement curve displays a quick step, but not step to 2V. Then, it continues to drift downwards.
3.When we short out the input channel (for example, connect “33 A1” with “32 A1 GND”), the measurement output still keeps drifting, but not displays 0.
Thus, we wonder if some settings should be regulated, or if there is something wrong with our operations, or there is an additional grounding option that we missed, or the device just breaks down. Could you please give us your valuable suggestions?
If you need any more informations, please do not hesitate to contact us (email:[email protected]). Thanks for your time and attention! We are looking forward to your kind reply.
Best,
Xianke

Hi Xianke,
It sounds like you may have your measurement configured in differential mode. If so, then you should read 0V when you short pin 66 AI1- to pin 33 AI1. Do you see this same behavior on other channels?
It looks like the default input configuration is differential, so you can also leave your wiring as it is, and change to RSE.
Trevor B.
PSE
National Instruments

Sound defaults to HDMI output after reboot (even when HDMI not connected)

Toshiba Chromebook 2, on Chrome OS
Trying to figure out how to change the default back to internal audio speakers permentantly. Whenever I close/reopen the laptop, it changes back to HDMI as deafult and I have to manually go back and change the settings. The cord isn't even plugged in anymore, this is confusing.
Any solution?

Not many ChromeBook users hang around here. Best to post in the Chromebook Forum.
-Jerry

Workflow not triggered even when Linkage is activated

Hi All,
I need to configure work flow for Idoc type BOMMAT.I have activated standard task TS00408177 for the same with Business Object IDOCBOMMAT and Event as INPUTERROROCCURED and activated the event linkage.
But whenever this idoc fails means it comes to status 51, the work flow is not generated.
Could anyone tell me the reason?

Hello,
Which workflow? Check what its starting events are and if they are activated.
Also look in SWEL (event trace) to make sure the events are being created.
Maybe also look in SWB_COND for any start conditions for that linkage.
regards
Rick Bakker
hanabi technology

HT1212 My iphone5 has been disabled for 22 million minutes as the password was entered wrong too many times. I have forgotten my password and when i go onto itunes it says i need the password even to restore the phone. even when i use the hold button

how do i disable the phone if its not letting me restore it any way without the passcode and i dont remeber it

Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766

Error in Output messages

Hi
I was getting error repeatedly in output messages of contract.
Due to changes in a field in contract , an output message is getting triggered. But the message is not getting procressed and is in status :incorrectly processed". When i check the processing log,it shows the message of no changes relevant to Print.
My question is -Why the output message got generated when there are no relevant changes for Print?
-Where can i find which all field changes are relevant?
How can i avoid this repeated errors in the messages?

see SAP Note 28869 - Printout of changes although field not print-relevant
the fields can be customized for print relevance in OLME > messages > print relevant...

Extended Classic PO Output Message

Hi,
For some of my vendor i want to send from PO the copy created from SRM using R/3 Output Messaged, for some i will have them send from SRM itself.
Is it possible to have in Extended Classic PO Output Message triggered from R/3 like Classic.
Thanks,
Jay

Hello Vadim,
I am repeating my understanding based on your reply.
1. Some PO created directly in R/3. Using ECS BADI, You mean there is no leading PO. This works like Classic. I will manage the output from R/3. I am ok here.
2. My Questions is on the other case.
My leading PO is in SRM typical ECS scenario. But, still i want the output from R/3, this is my requirement.
Is it supported out of the box.
If it not, is it possible by Custom.
If it is custom, is that the place i identified in my earlier reply or any more developments/configs required both in SRM and R/3.
I read a OSS Note 793786 solution to prevent the Output from R/3 for ECS PO. This means SAP is not allowing. Even after, i try to do by custom, want to foresee what other i will have.
I appreciate your help so far.
Thanks,
Jay

PO Output Message Record - Locked indicator is ticked

Hi,
Requirement: Create the output message records automatically, when PO is created/changed and saved.
Current Setting: Condition records(MN04) for the repsective output type are maintained. Output message record is created automatically and allows the printing when the PO's are created.
Issue: Output message records are created and trigerred when the PO's are created but there is an issue when the PO's are changed. Whe the PO is changed, output message record is getting created but it couldnot be processed as the Locked indicator is set for some reason.
Please guide me if I had missed any of the settings which is stopping me here at this point.
Please guide!!!
With regards
Krishna

Hi
There could also be possiblity that if PO is subject to release and PO is not compltely released
the Lock will remain checked
Partha

Constant notifications even when there's nothing to be notified of. Galaxy S5.

Ever since I updated my Samsung Galaxy s5 yesterday I have been getting constant message tones even when there's nothing to be notified of. I have restarted my phone more than enough times to know its not that causing issues.

josh366,
This definitely seems strange that you are receiving these notifications without having any type of texts, or emails, or any other types of notifications. Since the software upgrade, have you downloaded any new apps? Let's also try to power the device off, remove the SIM card and wait for about 30-60 seconds and then put the SIM back in and power back on. Keep us posted!
ErinW_VZW
Follow us on Twitter @VZWSupport

Ipad2 won't shut down even when i press the sleep/wake button and the home button at the same time.

I can't shut down my ipad2 even when i press and hold the sleep/wake button and the home button at the same time.

If the screen appears to be zoomed in, then does tapping the screen with three fingers zoom you back out ? When zoom is on you should also be able to scroll around the screen using three fingers on the screen.
If you are seeing the keypad then that should be for the iPad's passcode, I assume that you have one set ? If the iPad is disabled then I wouldn't expect the keypad to show.

How to produce Material output message when use bapi function?

Dear Experts :
I use bapi BAPI_GOODSMVT_CREATE to receive stock.
I find the output message can't create automatically even when I have set the type in MR21.
Hope someone can teach me how to produce the message when I create the material document by BAPI function.
Thanks a lot.

Hi,
The messages are stored in the return table of the bapi.
You can search in SCN or Google for BAPI error handling.

Call to FM 'RSPO_FRONTEND_PRINTERS_FOR_DEV' fails when output is triggered

Hi,
In my Smartforms driver/print program for deliveries, I am using a function module 'RSPO_FRONTEND_PRINTERS_FOR_DEV' to fetch the list of front-end printers.
When i try to print the delivery output from vl03n by using 'Issue Delivery Output' option, I can print the output to the designated printer whose value is fetched from this FM 'RSPO_FRONTEND_PRINTERS_FOR_DEV'.
But when i try to print the output by triggerring the output type (using 'Repeat output' from delivery), the FM 'RSPO_FRONTEND_PRINTERS_FOR_DEV' is failing to fetch the list of printers, and is sending
an error message to SAP inbox saying 'cannot read the list of printers'.
When i further debugged the FM 'RSPO_FRONTEND_PRINTERS_FOR_DEV' when triggerring the output by using "Repeat output' option, i could see that inside this FM, it is calling another RFC/FM 'RSPO_LIST_FRONTEND_PRINTERS' destination 'SAPGUI' and one more with destination 'LOCAL_PRINT', where both this calls are failing in this scenario. But the same function calls to this FM 'RSPO_LIST_FRONTEND_PRINTERS' destination 'SAPGIU'/'LOCAL_PRINT' are working correctly when i try to print the docuemnt using 'Issue Delviery Output' option.
If you look into the code of FM 'RSPO_LIST_FRONTEND_PRINTERS', there is no code inside this FM. It is just a remote function call.
Can you please let me know how can i retrieve the front-end printers in this scenario (scenario: when output/print is triggered by using 'Repeat output')...???
Thanks!

Hi,
In my Smartforms driver/print program for deliveries, I am using a function module 'RSPO_FRONTEND_PRINTERS_FOR_DEV' to fetch the list of front-end printers.
When i try to print the delivery output from vl03n by using 'Issue Delivery Output' option, I can print the output to the designated printer whose value is fetched from this FM 'RSPO_FRONTEND_PRINTERS_FOR_DEV'.
But when i try to print the output by triggerring the output type (using 'Repeat output' from delivery), the FM 'RSPO_FRONTEND_PRINTERS_FOR_DEV' is failing to fetch the list of printers, and is sending
an error message to SAP inbox saying 'cannot read the list of printers'.
When i further debugged the FM 'RSPO_FRONTEND_PRINTERS_FOR_DEV' when triggerring the output by using "Repeat output' option, i could see that inside this FM, it is calling another RFC/FM 'RSPO_LIST_FRONTEND_PRINTERS' destination 'SAPGUI' and one more with destination 'LOCAL_PRINT', where both this calls are failing in this scenario. But the same function calls to this FM 'RSPO_LIST_FRONTEND_PRINTERS' destination 'SAPGIU'/'LOCAL_PRINT' are working correctly when i try to print the docuemnt using 'Issue Delviery Output' option.
If you look into the code of FM 'RSPO_LIST_FRONTEND_PRINTERS', there is no code inside this FM. It is just a remote function call.
Can you please let me know how can i retrieve the front-end printers in this scenario (scenario: when output/print is triggered by using 'Repeat output')...???
Thanks!

PO Output message triggering even when it is on HOLD status

Similar Messages

Maybe you are looking for