PO Output Message type to set default for two output (neu and z_mail)

Hi,
we have a requirement for two output( print output and external send) at the same time when the po saved or me9f, and me99 trigers. kindly guid me the procedure to do this setting in nace,mn04 and spro.
thanks..,

Hi
YOur condiation record should have correctly for that, Genaraly for Email it will ask more then one combination like PO document type and Porg, Doc type/Vendor/Plant
If condiation recocrd id correct then you can get automaitaly when you craete the PO
Tcode for Creation of condiation record is NACR
Bhima

Similar Messages

Creation Output Message Type for Scheduling Aggrement

Hi,
Please share the detail configuration for the Output message type for scheduling aggrement, i need to use ALE IDoc so that i can send this SA to SRM system.
Regards,
Pankaj

Hi,
Output determination process for Scheduling aggrement.
SPRO-IMG-Material Management-Purchasing-Messages-Output Control-
1)First create condition table based which becomes condition record for accessing the data.
2)Create access sequence to access the data or search the based on the conditoin record in sequence of the condition table.
3)Define your message type like print,fax etc.
Maintain the conditon record for the MN07 for the output type which new one you created.
Regards
Ravi Shankar.

CSS Output Message Types

We're syndicating spec data to an internal web service via CSS under 6.1. Specs are syndicated twice per GSM workflow to the same system, first as a "create" and then as an "update".
So far in testing we haven't seen anything other than ADD types being output even when the same publication is syndicated more than once. The general GSM workflow steps are like this:
1. Draft
2. Developmental (Syndicate here as "create")
3. Approved (Syndicate again here as "update")
We would expect the message type at the Developmental step to be ADD, and then have a message type MODIFY at the Approved step to make it easier for the middleware program to know what it's looking at. But in both cases the XML comes out as an ADD in the syndicationCommand type attribute, and shows "Add" types in the catalog response section of the publication for both responses.
I've tried using both the Initial Load and New publication types, but they both have the same results. The questions then, are:
1. What triggers CSS to output a publication message as a MODIFY versus an ADD?
2. Does the publication type selection make any difference to the system at all for internal syndication?
Thanks!

Doing External syndications handles this scenario by setting the type to MODIFY if it has already been syndicated. Your testing is showing that this isn't having the same behavior for Internal syndications.
You could write a custom handler (like mentioned in [this previous post|https://forums.oracle.com/forums/thread.jspa?threadID=2376907] ) which checks if the spec has an already syndicated TIP and outputs a MODIFY value. You could use the ExportExtensions framework to do this.

Process open items: how to set defaults for the additional selections

Hi FI experts,
Can anyone tell me if it is possible to set defaults for the additional selections in the processing of open items.
I am using transaction F-04 (or F-06 or F-07) to post with clearing.
When processing the open items I can use additional selection parameters. In my case I need to use the document type. I would like to save this selection as a default but this doesn't seem to be possible.
1. it is not possible to save a variant for the processing of open items
2. I can not create a variant transaction (with trx. SHD0) for F-0x since this is only possible for dialog transactions
Do you see another way to store defaults for the additional selections in open item processing?
Thanks a lot.
Dimitri

Hi,
When you create a transaction variant from FB05, then also you will not able to default the value for additional selections variable. Hence SHD0 is not going to help.
As said above, either you can change the additional selection screen parameters, but here again you can't default the value. You can only reduce the number of entries on the screen.
Else you can create a custom transaction code by copying the standard. Even SAP recommends to create custom codes from standard tcode for clearing purposes depending on requirements.
Please check this link:
http://help.sap.com/saphelp_erp60_sp/helpdata/EN/41/37b8e7455b11d182b40000e829fbfe/frameset.htm
In the above link, in navigation choose clearing -- Specifications for processing open items
If it is a custom transaction then you can default document number.
Regards,
Ravi

Output Message Type

Hi Experts
For the Purchase Order & Outline can i maintain the same output message type ZNEU.
But the layout forms would be different.
Shouldn't be any issue right.
Rgds
MM

Hi,
You can have the same output type name ZNEU created for both PO & Outline agreement. But ZNEU for PO will be created under application EF & for Outline agreement it will be under application EV. Thus although the name will be same it will be under different applications. Moreover you can assign different forms & routines for PO & Outline agreement.
I hope this answers your question.

Material Document output message type.

Hi Experts
Please advise the details to be maintained in MN23 for the below message type.
Goods Issue Sub-con
Material Document output message type.
Trans./Event Type:
Print Version:
Print item:
Debit/Credit Ind:
Rgds
MM

SAP-MM1 wrote:
Hi Experts
>
> Please advise the details to be maintained in MN23 for the below message type.
>
> Goods Issue Sub-con
> Material Document output message type.
>
> Trans./Event Type:
> Print Version:
> Print item:
> Debit/Credit Ind:
>
> Rgds
> MM
Hi,
Trans./Event Type: WO(Goods Movement for Subcontracting)
Print Version:1(Individual Slip)
Print item: 3(GR/GI Slip for Subcontracting)

Set defaults for contacts

HI,
Can anyone tell me how to set the defaults for the contacts. Right now when I save a number in the contacts it is automatically set as a "work" number. I want it to automatically be a mobile number. This will save a lot of cut and pasting. Thanks.

20-Oct-2008 12:07 AM
orgazmic wrote:
Generally pleased with my new N96 which replaces my ageing N95 but i have noticed two bugs. I am using a simfree, nokia shop purchased N96 update to SW v11.101.098.1.
BUG 1: I've imported my contacts from my N95 and i cannot set defaults for email addresses or numbers. When the defaults option is selected from the menu in contacts the conacts application immediatley closes and i am returned to the front screen. Defaults for contacts i've created on the N96 can have there defaults set but defaults cannot be set for contacts imported using PC Suite or the phones sync utility. Also, for imported contacts the ringtone is the default nokia tune and not the tone defined in the contact or in my active profile. Again only imported contacts show this glitch with a contact created on the N96 working as expected. The default ringtone issue seems to be a common one on the forum maybe this is a connection.
BUG 2: The phone freezes if you try to resume playback of a video file whilst using a bluetooth headset (in my case a nokia BH-500). With the phone connected to the BH-500 you can play a video file from the start but when promted to continue the latest played file from last position its 'take the battery out time' when the phone locks up.
Any user got any thoughts on these anomolies??
Message Edited by orgazmic on 20-Oct-2008 12:13 AM
Hello, i have the 11.101 version and I imported all my contacts via PC suite and I CAN use the defaults option and the ringtone can be anything I want (apart for video ringtones-they don't work).
N95,N81,N96, N97

Setting defaults for text tool in CC Acrobat Pro

I am running the latest version of XI Acrobat Pro for Mac .
I can set defaults for everything except the text typing tool.
Can anyone help?
Thanks very much!

I am trying to select it, but the moment I let go of the left mouse button it disappears.

In Initial View, can you set defaults for Navigation tab, Page layout, and Magnification?

Adobe Acrobat 9 Pro V9.4.0
Win7 Pro x64
Problem: In Initial View, can you set defaults for Navigation tab, Page layout, and Magnification?
Every time Acrobat scans a document, I have to go to Initial View to set Navigation tab, Page layout, and Magnification. It does not remember the settings I last used.
Thanks in advance.

See my response to this post

What is the message type we can take for Payroll system

Hi All,
what is the message type we can take for Payroll system

Hi
I feel that you are talking about IDoc Message Types..
HROT_CA                        HR: Outsourcing - Canadian Payroll
HROT_CM                        HR: Outsourcing - Canadian Master Data Payroll
HROT_US                        HR: Outsourcing - US Payroll
HROT_XX                        HR: Outsourcing Payroll International
HRTRPR                         Transfer TRV-PAY(PayrollTravelExpenses)
MANAGEREXTPAYROLL_INSERTLEGACY Transfer payroll account
MANAGEREXTPAYROLL_INSERTOUT    Update of a payroll result using an outsourcer
these are the available Message type for payroll...
hope you are talking about IDoc message type for Payroll...
vijay

Setting Defaults for Essbase 6.1

How do you set defaults for the options/global/mouse-actions?Presently, we have to disable the mouse-actions every time we enter Excel. Essbase is overwriting the mouse-actions with Essbase functions every time we enter Excel (it does not save our changes when we exit Excel). We have also tried to work in Essbase with the preferred default settings but this has not helped either.

Is your Essbase.ini file read-only? (or the windows directory where it is located read-only?) Tim TowApplied OLAP, Inc

HT4314 I have two ipods in my house that were set up under the same email. I have since assigned two different emails. How can I change the game center account so that is not shared by both ipods because it is for two different users and they are not ha

I have two ipods in my house that were set up under the same email. I have since assigned two different emails. How can I change the game center account so that is not shared by both ipods because it is for two different users and they are not happy?

By "game center account", do you mean Apple ID?
If so, you can change it.
1. Tap settings and navigate to iTunes and App Stores
2. Tap "Apple ID" and then tap "Sign Out"
3. Log in with a different ID.

How to set password for a zip file and should be checked when reading that

Hi friends,
how to set password for a zip file and should be checked when reading that file???
thanks.
Praveen Reddy.J

Heyy man, i think, u did not get my problem.
all i have to do is:
i have to create a zip file, and we should secure it with password when creating. and whenever the user wants to open that zip file he should provide correct passowrd otherwise he could not read that file. So, we should check for that also.
Tanks for reply.

After moving my music library from my old mb to the new one, my new mb pro does not play the files evenly. It takes a break for two sec's and starts playback where it stopped. Ideas anyone?

After moving my music library from my old mb to the new one, my new mb pro does not play the files evenly. It takes a break for two sec's and starts playback where it stopped. Ideas anyone?

I may have found an answer here:
http://www.ilounge.com/index.php/articles/comments/moving-your-itunes-library-to -a-new-hard-drive
They only thing I can assume is that my external hard drive was slow to start and iTunes defaulted to its old directory (see the last paragraph at the link above). However, once my external was recognized shouldn't everything have fixed itself?
Message was edited by: williamson42
Message was edited by: williamson42

[svn:fx-trunk] 13169: * Fixes for two FB issues and two regressions caused by recent fixes.

Revision: 13169
Revision: 13169
Author:   [email protected]
Date:     2009-12-22 14:39:59 -0800 (Tue, 22 Dec 2009)
Log Message:
Fixes for two FB issues and two regressions caused by recent fixes.
QE notes:
Doc notes:
Bugs: SDK-24708, SDK-24668, SDK-24827, SDK-24829
Reviewer: Corey
Tests run: checkintests, com.adobe.flexbuilder.project JUnit tests
Is noteworthy for integration: Yes, fixes two FB issues
Code-level description of changes:
modules/compiler/src/java/flex2/tools/oem/Library.java
modules/compiler/src/java/flex2/tools/Compc.java
modules/compiler/src/java/flex2/tools/Fcsh.java
modules/compiler/src/java/flex2/compiler/asdoc/AsDocAPI.java
    Modified calls into SwcAPI's setupClasses() and
    setupNamespaceComponents() to pass in the SourceList.
modules/compiler/src/java/flex2/tools/VersionInfo.java
    Added null check to getBuild().
modules/compiler/src/java/flex2/compiler/CompilerAPI.java
    Modified compile() to only add elements of "classes" to "sources"
    if not already contained. This covers the case of a Source being
    in the SourceList and the manifest.
modules/compiler/src/java/flex2/compiler/swc/SwcAPI.java
    Modified setupClasses() and setupNamespaceComponents() to check the
    SourceList before the SourcePath when looking up sources.
modules/compiler/src/java/flex2/compiler/SourceList.java
    Made getPaths() public.
modules/compiler/src/java/flex2/compiler/CompilationUnit.java
    Modified setState() to skip disconnecting the root's Logger. This
    fixes SDK-24827 and SDK-24829.
modules/compiler/src/java/flex2/tools/oem/internal/OEMReport.java
    Added sourceList variable, modified procressSources() to
    initialize it, and modified init() to recursively store a
    timestamp for each path in the SourceList. This fixes SDK-24708.
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-24708
    http://bugs.adobe.com/jira/browse/SDK-24668
    http://bugs.adobe.com/jira/browse/SDK-24827
    http://bugs.adobe.com/jira/browse/SDK-24829
    http://bugs.adobe.com/jira/browse/SDK-24827
    http://bugs.adobe.com/jira/browse/SDK-24829
    http://bugs.adobe.com/jira/browse/SDK-24708
Modified Paths:
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/CompilationUnit.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/CompilerAPI.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/SourceList.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/as3/SignatureExtension.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/AsDocAPI.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/swc/SwcAPI.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/Compc.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/Fcsh.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/VersionInfo.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/oem/Library.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/oem/internal/OEMReport.java

PO Output Message type to set default for two output (neu and z_mail)

Similar Messages

Maybe you are looking for