PO output with mail, fax and print

I have created a PO with message type medium 5 (i.e. External send).
Now I go inside 'Communication method' and I can see communication strategy field, I select EML there (i.e EMAIL, FAX, PRINT).
Now after saving PO is getting mailed and also fax is working, but it is not printing out.
1. Is there any separate settings required for print out?
If I select medium as print out then print is working.
Please advice.
Thanks

Can you please explain more please?
1. Is this possible for PO output?
2. I have Email,Fax and print option, then if email goes then other two will not work?
3.Where the print will come, is this the printer mentioned in the communication method?
4.Where can I get the configuration steps for this?
Please advice.

Similar Messages

  • Restrict Output for Fax and Print in Sales Order

    Hi,
    I am having a sales order output with two output types - Fax and Print. I need to restrict one page "Terms & Conditions" to be printed only once when I select the output type as FAX. But if the output type is PRINT, I have to print the page "Terms & Conditions" after every page i.e in even numbers since it is getting printed on both sides of the paper.
    Can anyone help me on this.
    Thanks in Advance.

    Hi,
    For pages->Conditions->write condition for ,when it should trigger.
    output type eq Printer.
    Regards,
    Shiva Kumar

  • Problems with Mail, Safari and iTunes after updating to 10.5.6

    Hi all,
    after installing 10.5.6 I have problems with Mail, Safari and iTunes.
    The time to open mails, websides and iTunes store is increasing dramatically since the update. If I open a webside parallel with Safari and Firefox, Safari needs minimum 15 times longer to open the complete side. Mails containing HTML-code also needs a long time to be opened. Tha same Problem with iTunes store. Connecting to the Store costs at least 30 - 40 seconds. And unfortunately for every iTunes store side I open. Its terrible
    Any idea or workaroung to solve that problem?
    Regards
    Michael

    First, run Disk Utility and repair permissions and then restart.
    I installed the 10.5.6 Combo update. Sometimes things get "lost in the translation" when you use Software Update depending on your installation. Perhaps you can download 10.5.6 Combo from the website and install it from your desktop.

  • Mail merge and print one document at a time?

    Hi all. I'm an Apple revert. I'm currently using the i7 iMac. Previous Apple computer was a //e.
    I print an 8 or 12 page newsletter for my work. I want my printer/copier to fold and staple each document individually. Pages seems to send all documents to the printer in one huge file. How do I mail merge and print one document at a time?
    [In Windows Publisher, there's a registry hack to make Pub print one at a time. Anything similar on a Mac?]
    Mike

    Hello
    As you saw wrongly my first name I'm not too surprised that you missed the beast
    In fact it's not surprising that you missed it.
    I prepared the archive but forgot to upload it
    Download :
    For_iWork:iWork '09:découpe_PDFs.zip
    Yvan KOENIG (VALLAURIS, France) samedi 27 août 2011 11:29:37
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
    My iDisk is : <http://public.me.com/koenigyvan>
    Please : Search for questions similar to your own before submitting them to the community
    To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

  • How can I access my parents iCloud account remotely to assist with photo management and printing?

    How can I access my parents iCloud account remotely to assist with photo management and printing?

    I tried that without any luck. I was hoping I could get Apple to reset it for me or delete the account so I could recreate it or at least tell me what is listed as my birth date, the security question answer.

  • With 'Mail v8' and 'Yosemite' accounts settings are not saved and I keep having to check the "SSL" box

    With 'Mail v8' and 'Yosemite' 'mail' "account settings" are not saved and I keep having to check the "SSL" box. This has only occurred since upgrade to Yosemite?
    Any help would be appreciated as this is so frustrating!!

    Update to 3.6.16 has fixed this problem.

  • How to print wireless? I have a MacBook Pro with Mountain Lion and printer is a Canon MP620

    How to print wireless? I have a MacBook Pro with Mountain Lion and printer is a Canon MP620

    http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_s eries/pixma_mp620#Wireless_Help

  • Ok.  I hope someone can answer my question.  I am new to photoshop.  I need version cs4 in order to work with a designer and printer on some logo work. I've tried to download it but it just gives me individual files with no installer and nothing - includi

    ok.  I hope someone can answer my question.  I am new to photoshop.  I need version cs4 in order to work with a designer and printer on some logo work. I've tried to download it but it just gives me individual files with no installer and nothing - including the adobe "instructions" seems to work.  How can i get this software in a downloadable format? is it actually free - I'm assuming it is...  Hope someone knows the answer to these questions...

    The download itself is free and is valid for 30 days only.  After that, the software ceases to work.
    CS4 is pretty old, no longer sold and no longer supported by Adobe.  It's also not compatible with many modern OSes.
    Why do you have to work with such an obsolete version of Photoshop?
    What kind of "designer" uses it?

  • Cannot make Canon PIXMA MX922 fax to work with "Windows Fax And Scan" on Windows 7, 8.1

    I have Canon PIXMA MX922 multifunction printer installed wireless on iMac OS X Mavericks. It works great but there is no fax drivers for Mac. I have Windows 7 and Windows 8.1 installed on Parallel Desktop. I am able to print and scan on these machines. I can scan using "Windows Fax and Scan" and other programs including My Image Gardens but no luck with faxing. I can send faxes using print function and chosing a Cannon MX920 series fax driver. The problem is to recieve faxes. I've connected MX922 wireless and wired with no help.
    Does anyone have the same problem? Any ideas?

    Hi Anton,
    thank you for your advice.
    In case this is going to fix itself in 25 hours I will check for the issue then. I'm gonna let you know whether the issues has disappeared.
    But it sounds to me a little bit, like you have been expecting that behaviour? Have you? Especially within a Lab it is very confusing to have test clients which appear fully functional 25 hours after the setup has been succeeded.
    I've followed your annotation and posted the log files on the Connect portal.
    Thx
    Peter

  • Fax and Print

    Hi ,
    Can we setup the fax number / printer dynamically for bursting in BI Publisher?
    Regards,
    Saurabh

    Hi @ineedascreensoi,
    Welcome to the HP Support Forums. I see that you would like to learn more about eFax.
    Your Officejet 4620 is eFax compatible but does not come with a free eFax account. The post titled eFax Support by @JDCorral from eFax is applicable to your printer and situation. I have included the link to the eFax website.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • Built-in Fax and printing to default paper tray

    Gentleones,
    I have a HP LJ1320n which is connected to my iMac. The problem is that incoming faxes, when printed, cause the printer to request paper and the only way to make the printer continue is to go press the green button on the printer.
    I cannot find anything anywhere which would allow me to tell the built-in faxing capability of 10.4.10 the default paper tray or page size. None of the options in printer setup affect the behavior. It always makes me press the green button.
    Any help would be greatly appreciated,
    Bill

    hi again!
    just had a look at my print n share app on the ipad. select your document, tap the printer icon on the top right and a new Print option box will open with all the print options, the paper tray option is at the bottom (I have attached a screenshot below) :

  • Issue with Color Management and Print Module

    The is a repost per request from a comment on Julieanne Kost's blog...
    Having sticky output settings can be useful but now that LR has a color managed workflow, it introduces some problems. For example, if a Proof Copy is created and edited to a particular profile, then that copy is taken into the Print Module, if the output profile that has “stuck” from the previous job does not match you have a problem. It would be nice if the behavior for proof copies would be to automatically match the editing profile or at least warn of a mismatch. And while it is nice to be able to create a Saved Print with all the output parameters, it would be helpful to be able to create saved sets of “Print Job” settings assuming that they will be consistent for a particular printer/ink/paper combination (and whatever “Print Adjustment” you have found to your liking) then easily applied to any image being prepared for output. Perhaps a “save setting” selection under the “Print to:” menu.

    So what you propose is the templates are proof copy sensitive and if they are setup for profile A but the proof copy describes profile B, then everything but the template defined profile is honored? I could get behind that idea (but what if one selects multiple VC’s with differing profiles and goes into Print?).
    That's pretty much it. It does get complicated quickly as you look at multiple VCs or (and I think we need to start making the distinction between proof copies and ordinary virtual copies) if you bring a mixture of PCs and VCs into the print module. I would suggest that the default behavior be to set output profile of the PC as defined in the PC and retain the "sticky" behavior for ordinary VCs.
    I also think that having the ability to save a "Print Copy" may change what we need out of the templates and perhaps their overall function should be re-evaluated.
    The VC name should show you the profile used for soft proofing if you have the overlay on. That helps too. My concern are those who work with these VC’s and the text overlay is off.
    I'm not getting that behavior. The only place the copy name shows up in the print module is in the filmstrip header. Maybe I have a preference set wrong somewhere... Still, I'd rather the software take care of making the match rather than having to double check to make sure I haven't inadvertently changed the profile somehow (i.e. clicking on a template just to see how it would look on another size paper).

  • Trouble with E-Fax and my Photosmart 7510

    I have the 7510 which has the capcity for E-fax. I have been able to successfully send faxes but sometimes I get a "failure" notice. I see that the free E-Fax (which is what I have as it came with the machine) only allows 20 sent faxes and 20 received each month and then one can elect to update for a fee through E-Fax. I just tried to send a fax (May 2014) and it indicated "failure" but I have not used the fax capactiy at all this month. Anyone have this kind of difficulty with the "free E-Fax? 
    Another question - is it possible to enrypt through E-Fax whem utilizing the e-mail method of faxing? 
    Thanks! 

    Hello Shape7
    For this specific issue you are having with your free E-Fax service, I would highly recommend calling HP's Cloud Services.
    See this post for the contact information you will need: HP Cloud Services
    Have a great Tuesday
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Using Gmail with Mail.app and Notes

    I have the preference set to store notes on Gmail's server. If I create a note on my Mac it just looks like a funny message through Gmail with the subject and the body the same and the sender as (Unknown Sender) which is no big deal but I would like to be able to create notes with Gmail because I have a G1 and use it constantly.
    Is there a way to create a note with Gmail so that it shows up like a note in Mail.app?

    Open the Print & Scan preference pane in System Preferences and delete the print queue, then add it back. If there's no change, reset the printing system.

  • Applescript with Mail attachments and shell scripts (pdftk)

    I'm trying to create a script that I can call using mail rules that will:
    1. save an attached PDF file to a folder (folder name is 'PDFs_from_Mail:')
    2. save each page of the PDF as a separate file
    3. delete the old file
    so far, i used the script below called from mail to save the attachments to the
    -- script called from mail
    using terms from application"Mail"
      onperform mail action with messages theMessages
        tell application"Finder" to set ptd to (path to desktopfolder) as string
        tell application"Finder" to set pathToAttachments to(path to desktop folder as string) &"PDFs_from_Mail:"
        tell application"Mail"
           repeatwith theMessage in theMessages
                if theMessage's mailattachments is not {} then
                      repeatwith theAttachment in theMessage's mailattachments
                            settheFileName to pathToAttachments & theAttachment's name
                            try
                                     save theAttachment in theFileName
                              onerror errnum
                            endtry
                      endrepeat
                end if
             endrepeat
          end tell
      endperform mail action with messages
    end usingterms from
    tell application"Mail"
        setmyMessages to selection
        tellme to perform mail action with messages myMessages
    end tell
    -- end of script called from mail
    after the file is in the folder, i'd like to automatically call a script that splits it in to pages and saves each file.  I found pdftk can do what I need.  I got the following working, which uses a folder action script to process the file:
    -- burst script
    on addingfolder items to this_folder after receiving added_items
       tellapplication "Finder"
           set fold_name tothe name of this_folder
               try
                   repeatwith i from 1 to number ofitems in added_items
                          set theFile toitem i of added_items
                          set oldDelimiters toAppleScript's text item delimiters
                          set AppleScript's textitem delimiters to {":"}
                          set theFolder to(((text items 1 thru ((count everytext item of (theFile asstring)) -1)) of (theFile asstring))) as string
                          set AppleScript's textitem delimiters to oldDelimiters
                                --get the file name
                                   set theFileName to the name of theFile
                                                     do shell script"/usr/local/bin/pdftk " & (POSIX path oftheFile) & " burst output " & (POSIXpath of theFolder) & "/" & theFileName &"_%03d.pdf"
                                                      delete theFile
                                                    endrepeat
                                        end try
                         endtell
    end adding folder items to
    -- end burst script
    the shell script that is called is in the format:
    pdftk myfile.pdf burst
    the output parameter basically adds the page number to the end of the original filename for each file that is created
    my idea was to attach the folder action script to the 'PDFs_from_Mail' folder, and when the first script is called, the file would be saved to that folder and trigger the folder action script burst the file.  it works for individual messages, but when I try using it with the hundreds of messages that I have, all kinds of crazy things happen... the filenames are all wrong and it seems like it goes on infinitely.
    My familiarity with applescript is somewhat limited (as you may have guessed) and I'm wondering if there is a better approach.  perhaps if I incorporate the shell script into the script called from mail it may streamline everything.
    my problem is that I am not sure what code I need to keep in each script.
    can anyone take a quick look at this and give me some advice?
    my goal is to have these individual pages in a folder so that I can use quick view to page through them.  if the pdf is more than one page, then I have to get involved in scrolling up/down and it becomes difficult to find things efficiently.
    thanks!

    just a quick update and a general questions about applescripting with shell scripts...
    i attached the above folder action burst script to a folder, and have been dragging pdf files into it, one at a time.
    sometimes the script runs fine and the new files are created and the old pdf is deleted.  other times, there is a long delay between when I drop a pdf file into the folder and when the new files are created.  and sometimes nothing even happens at all (uaually if i dont wait for at least 30 seconds or so between dropping the files in the folder).  I also noticed that the window title text (area showing the folder name at the top of the finder window) becomes grayed out when the script is running and sometimes it remains grayed out for a few minutes after the script has run.
    could it be that the shell script just takes a really long time to work?  i am afraid to drop more than one file at a time as the last time I tried that the output was all wrong and I had to force quit processes and shut down. 

Maybe you are looking for