PO, Prdn Ord link
Hi,
In Make To Order scenario, how can we see the list of purchase orders released for a particular sale order or production order. If the sale order gets cancelled for some reason, all those POs are to be delinked from old sale order and relinked to new sale order. Is this possible in standard ?
Dear,
You can use COOIS report to get the lionk to prod order and sale order.
To get the link to PO to sales order, you can use the report MD04...here each sales order itemwise the data is maintianed.
To delink PO from SO, you make sure that the GR is not done, if doen,reverse it. Then you can change the sales order assignment.
Edited by: Rajesha Vittal on Mar 28, 2008 11:12 AM
Similar Messages
-
Error In Depreciation Run in the period 08 the following is the error
Dear all
While executing the Deperciation run in the bacground in the period 8 system througing a error message that the Object ORD 600020 has system status CRTD (Created). According to this status, transaction 'FI: Postings' is not allowed. how do i resolve this issue.
Can any one help me out this please. to post the depreciation for the year 2006 and till date.
Rao
Edited by: venkateshwararao Kongara on Nov 15, 2008 8:18 AMPlease run the depr program under test mode with list assets checked and recreate the error. Then please send us the long text of the error message.
Would you please check how is the ORD *** linked to Asset accounts? -
Hi experts,
tell how to integrate with MM and SD module as t.code i know obyc.but i know how its really work in real time , where GL is assign and what type of GL have to make.its asked in interview , tell me abt valuation class .
thnaks,
arti singhMM-FI integration will be done in T.Code OBYC. SD-FI integration will be done in VKOA.
OBYC - GL accounts has to be assigned based on the valuation class as detailed combination:
Transaction Valuation Class G/L Account for
BSX as per Material master INVENTORY POSTING
WRX GR/IR CLG
GBB-VBO/VBR/VKA CONSUMPTION
GBB-VAX/VAY COGS
GBB-AUA/AUF ORDER SETTLEMENT
AUM ST.TRANSFER
FRL SUB. CONTRACT CHARGES
PRD PRICE DIFF
GBB-INV PHY. INV
UMB INV. REVAL
GBB-VNG SCRAPPING
BSV CHANGE IN STOCK
ZOB 501 MVT. GR WO PUR. ORD
ZOF 521 MVT. GR WO PRDN ORD
BSR -
Sale order - mtrl - prod ord ; table link
hi,
pl tell me a link through table and field -
how to get a link between sale ord - item no. - mtrl - prodn ord no. - prodn posted qty.
regardsI have an understanding that you are in need of the tables for mat.no,prod.ord.and sales order to make a report to make them all appear in the report...
If that is so,there is no need for tables..YOu can get that in standard SAP..
Go to COOIS..enter the plant and execute.. In the resulting screen, go to chane layout. There u can add the sales order in the layout...material and production order will be there by default...
Thus you can have the material,production order and the corresponding sales order in a single transaction...
hope this clarifies...
karthick -
Copying Documents Object Links attached to BOM Headers & Items in Prod Ord
Dear Gurus,
I've created a BOM for an assembly. This BOM has document assignments at 3 places -
1. BOM Header level (in BOM Header overview - Document Assignment tab)
2. BOM Item level (in BOM Item: All Data - Document Assignment tab)
3. Document assigned as a BOM Item with Item Category D (in BOM General ITem overview - Document tab)
When I create the Production Order for this assembly, only the document that is assigned as a BOM Item with Item Category D (point#3 above) is copied into the order.
I'm not able to view the document links for the documents as described in points 1 and 2 above.
The necessary configurations in Production Scheduling Profile have been done for integration with DMS.
I need to know if there is a way (probably through some user exit, BADI or by implementing some SAP Note), the object links for documents attached to BOM Header and BOM Items can also be transferred to a Production Order.
Please help me out in resolving this issue as it is a very critical requirement of the client.
With Regards,
NitinHi Niraj,
If you follow following path in the Production Order Header. click on the Document Overview (SHIFT+F7) Button
You could be able to see the Links for Material Master attached Documents. there is a Button for BOM origin documents. I tried but it didnt worked. I hope it works for you. If it works for you. Please let me know.
Regards,
Ravi S Bijjala -
Link EBELN(PO #) with AUFNR(Prod Ord #)
Dear All,
may i know which tables can i link up with, in order to find the Prod order # and those PO # that are related it. Initially i used EKKN to retrieve the data but after some verification, i found that some of the prod order # which are supposed to appear don't exist in EKKN. Kindly appreciated your advice to guide me through it.
Thanks and regards
YMHi,
You can be able to connect only through EKKN table. but while retreving the data from EKKN you need to compare AUFNR or NPLNR based on Order Category.
Reward Points if it helps,
Satish -
Unable to reinstall ORDS Beta 3.0 after uninstalling it
Tried to reinstall ORDS Beta 3.0 after uninstalling it but got below error. Pls provide clean steps to reinstall. Thx.
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at oracle.dbtools.jarcl.Entrypoint.main(Entrypoint.java:58)
Caused by: java.io.IOException: Error executing script: ords_create_rest_users.sql Error: ORA-00922: missing or invalid option
Error starting at line : 48 in command -
create user ORDS_PUBLIC_USER identified by xx account unlock default tablespace USERS temporary tablespace TEMP
Error at Command Line : 48 Column : 54
Error report -
SQL Error: ORA-00922: missing or invalid optionCan you check the ordsuninstall_*.log file located in the logs folder if it contains any errors?
Try it again using the instructions in this link below to uninstall/reinstall ORDS:
http://docs.oracle.com/cd/E56351_01/doc.30/e56293/install.htm#CHDIHIEC
Liz -
Link Sales Order Type to Customer
Hi gurus,
Do you know if there is anyway of linking a customer to a Sales Order Type?
So that if selling to that customer, everytime that Sales Order type is determined?
Please consider scenario where Sales Orde type is created through DP90 from service orders.
Thanks and best regards,
Víctor Liedohi victor,
in standard SAP there is no direct link as such for customer to sales order type.
what is the business logic for the same.
you are linking the sales areas for the document types - not to the customer level - that is one type of control which SAP is providing.
but here you need to enter the sales order type manually before entering the customer for the sales order. so MV45AFZZ : USER EXIT SAVEDOCUMENT_PREPARE.
you can write a piece of code for the same.
you need to hard code account group of the customers & sales document type, so that when ever before saving the sales order the system will check the sales order type used for that particular customer is correct or not and then saves the sales order or else it throws an error
hope this clears your issue
balajia -
Netctl fails with "link is not ready"
Hi all
I was hoping that you can help me out! I'm new to archlinux so please accept my apologies if I've missed something obvious.
I've just setup a new archlinux system on my HP N40L according to the archwiki beginner's guide and this btrfs guide.
I want to automatically connect to the internet with a static ip via ethernet cable.
netctl setup
cp /etc/netctl/examples/ethernet-static /etc/netctl/ethernet
nano /etc/netctl/ethernet
netctl start ethernet
netctl profile
Description='A basic static ethernet connection'
Interface=enp2s0
Connection=ethernet
IP=static
Address=('192.168.1.212/24')
#Routes=('192.168.0.0/24 via 192.168.1.2')
Gateway='192.168.1.1'
DNS=('62.24.128.17')
## For IPv6 autoconfiguration
#IP6=stateless
## For IPv6 static address configuration
#IP6=static
#Address6=('1234:5678:9abc:def::1/64' '1234:3456::123/96')
#Routes6=('abcd::1234')
#Gateway6='1234:0:123::abcd'
journalctl output
Jul 21 21:52:50 arch network[340]: Starting network profile 'ethernet'...
Jul 21 21:52:50 arch kernel: tg3 0000:02:00.0: irq 43 for MSI/MSI-X
Jul 21 21:52:51 arch kernel: IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
Jul 21 21:52:56 arch network[340]: No connection on interface 'enp2s0'
Jul 21 21:52:57 arch network[340]: Failed to bring the network up for profile 'ethernet'
Jul 21 21:52:57 arch systemd[1]: [email protected]: main process exited, code=exited, status=1/FAILURE
Jul 21 21:52:57 arch systemd[1]: Failed to start A basic static ethernet connection.
Jul 21 21:52:57 arch systemd[1]: Unit [email protected] entered failed state.
dmesg output for ethernet card module
[ 4.576037] tg3.c:v3.130 (February 14, 2013)
[ 4.621520] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95723) rev 5784100] (PCI Express) MAC address a0:b3:cc:df:1e:7f
[ 4.621526] tg3 0000:02:00.0 eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 4.621530] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 4.621533] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 31.196779] tg3 0000:02:00.0: irq 43 for MSI/MSI-X
I can connect if I use these commands so there's no physical problem with hardware.
ip link set enp2s0 up
ip addr add 192.168.1.200/24 dev enp2s0
ip route add default via 192.168.1.1
or
systemctl start dhcpcd@enp2s0
I also tried to bring the interface up first.
ip link set enp2s0 up
netctl start ethernet
journalctl output
Jul 21 22:00:47 arch network[438]: Starting network profile 'ethernet'...
Jul 21 22:00:47 arch network[438]: The interface of network profile 'ethernet' is already up
Jul 21 22:00:47 arch systemd[1]: [email protected]: main process exited, code=exited, status=1/FAILURE
Jul 21 22:00:47 arch systemd[1]: Failed to start A basic static ethernet connection.
systemctl output
UNIT LOAD ACTIVE SUB DESCRIPTION
proc-sys...t_misc.automount loaded active waiting Arbitrary Executable File Formats File System Automount Point
sys-devi...und-card0.device loaded active plugged GF119 HDMI Audio Controller
sys-devi...et-enp2s0.device loaded active plugged NC107i Integrated PCI Express Gigabit Server Adapter
sys-devi...-sda-sda1.device loaded active plugged SAMSUNG_SSD_830_Series
sys-devi...-sda-sda2.device loaded active plugged SAMSUNG_SSD_830_Series
sys-devi...block-sda.device loaded active plugged SAMSUNG_SSD_830_Series
sys-devi...tty-ttyS0.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS0
sys-devi...tty-ttyS1.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS1
sys-devi...tty-ttyS2.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS2
sys-devi...tty-ttyS3.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS3
sys-module-configfs.device loaded active plugged /sys/module/configfs
sys-subs...es-enp2s0.device loaded active plugged NC107i Integrated PCI Express Gigabit Server Adapter
-.mount loaded active mounted /
dev-hugepages.mount loaded active mounted Huge Pages File System
dev-mqueue.mount loaded active mounted POSIX Message Queue File System
sys-kernel-config.mount loaded active mounted Configuration File System
sys-kernel-debug.mount loaded active mounted Debug File System
tmp.mount loaded active mounted Temporary Directory
systemd-...ord-console.path loaded active waiting Dispatch Password Requests to Console Directory Watch
systemd-...ssword-wall.path loaded active waiting Forward Password Requests to Wall Directory Watch
dbus.service loaded active running D-Bus System Message Bus
[email protected] loaded active running Getty on tty1
[email protected] loaded failed failed A basic static ethernet connection
sshd.service loaded active running OpenSSH Daemon
systemd-journald.service loaded active running Journal Service
systemd-logind.service loaded active running Login Service
systemd-remount-fs.service loaded active exited Remount Root and Kernel File Systems
systemd-sysctl.service loaded active exited Apply Kernel Variables
systemd-...es-setup.service loaded active exited Recreate Volatile Files and Directories
systemd-...-trigger.service loaded active exited udev Coldplug all Devices
systemd-udevd.service loaded active running udev Kernel Device Manager
systemd-update-utmp.service loaded active exited Update UTMP about System Reboot/Shutdown
systemd-...sessions.service loaded active exited Permit User Sessions
systemd-...le-setup.service loaded active exited Setup Virtual Console
dbus.socket loaded active running D-Bus System Message Bus Socket
dmeventd.socket loaded active listening Device-mapper event daemon FIFOs
lvmetad.socket loaded active listening LVM2 metadata daemon socket
systemd-initctl.socket loaded active listening /dev/initctl Compatibility Named Pipe
systemd-journald.socket loaded active running Journal Socket
systemd-shutdownd.socket loaded active listening Delayed Shutdown Socket
systemd-...d-control.socket loaded active listening udev Control Socket
systemd-udevd-kernel.socket loaded active running udev Kernel Socket
basic.target loaded active active Basic System
cryptsetup.target loaded active active Encrypted Volumes
getty.target loaded active active Login Prompts
graphical.target loaded active active Graphical Interface
local-fs-pre.target loaded active active Local File Systems (Pre)
local-fs.target loaded active active Local File Systems
multi-user.target loaded active active Multi-User System
network.target loaded active active Network
paths.target loaded active active Paths
remote-fs.target loaded active active Remote File Systems
sockets.target loaded active active Sockets
sound.target loaded active active Sound Card
swap.target loaded active active Swap
sysinit.target loaded active active System Initialization
timers.target loaded active active Timers
systemd-...iles-clean.timer loaded active waiting Daily Cleanup of Temporary Directories
LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.
58 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
My modem router (192.168.1.1) handles DNS and DHCP (192.168.1.2 - 192.168.1.254).
I tried change the address pool to 192.168.1.2 - 192.168.1.253 and setting my computer's ip to 192.168.1.254 to avoid possible conflicts but this made no difference.
I have only installed packages from the base group and the packages openssh, amd-ucode and btrfs-progs.
thanks for the help - hopefully it's something simple I've missed
EDIT
I've found out that the following works
pacman -S ifplugd
systemctl start [email protected]
does anyone know why the beginner's guide wasn't working for me? is there a bug with netctl?
Last edited by tadetter (2013-07-22 22:11:17)Thanks for the pointer Lone_Wolf.
I've opted for the method you linked to as it means I can remove netctl and ifplugd.
[Unit]
Description=Wired Static IP Connectivity
Wants=network.target
Before=network.target
BindsTo=sys-subsystem-net-devices-enp2s0.device
After=sys-subsystem-net-devices-enp2s0.device
[Service]
Type=oneshot
RemainAfterExit=yes
ExecStart=/usr/bin/ip link set dev enp2s0 up
ExecStart=/usr/bin/ip addr add 192.168.1.254/24 dev enp2s0
ExecStart=/usr/bin/ip route add default via 192.168.1.1
ExecStop=/usr/bin/ip addr flush dev enp2s0
ExecStop=/usr/bin/ip link set dev enp2s0 down
[Install]
WantedBy=multi-user.target
I guess this is a solution sorts, although the original issue remains unsolved.
Is it worth cross posting to netctl on git?
Last edited by tadetter (2013-07-22 22:11:38) -
Materialized View and Ord Media questions
Hey Guys,
My first question is on the use and creation of materialized views which i have previously done using TOAD. The question that i have is where/if can i visually see the constraints that are on a materialized view and where is the information for "next refresh" times placed?
Question two is about viewing informaiton on ord media objects that are stored. Previously, i had the ability to double click one of these elememts in the data view and see the information related to that instance of the ord media object, but the SQL developer does not seem to have this ability??
Thanks in advance.Thanks Kris,
The reason that i asked about the constraints on MV is because when you create a materialized view over a db link with primary key, it will place a not null constraint on every column. This is obviously no good because some rows are bound to contain nulls and these need to be removed and updated before it will work!
As for the ord objects, it just makes it a little easier for testing to see what they are :).
Anyway, its looking great and i hope these features will be in the next release?
Cheers David -
Change the order of links to item level
Hi All
I have a question in my portal I have of item level in this order:
- Item Overview
- Decision Points
- Financial Planning
- Capacity Planning
- Roles
- Questionnaires
- Reviews
- Tasks
- application1 EA
- application2 M
- application3 PlP
- application4 DA
- application5 GMT
Now, I want to change the order of links in the following way:
- Item Overview
- Roles
- Decision Points
- Capacity Planning
- application3 PlP
- application5 GMT
- Questionnaires
- Tasks
- Reviews
- application1 EA
- application2 M
- application4 DA
I have checked on backend (xrpm 4.0) trought spro transaction, but here there isn't any field for changing the order, however in xrpm 4.5 there is the sort number for ording
How can I do this change in 4.0?
Thanks for your answersThanks for you answer
We have in the user's roles in backend :
SAP_RPM_CONTENTREVIEWER
SAP_RPM_CUSTOMIZER
SAP_RPM_EXECUTIVE
SAP_RPM_PROJECTAPPROVER
SAP_RPM_PROJECTMANAGER
SAP_RPM_PROJECTMEMBER
SAP_RPM_PROJECTOFFICE
SAP_RPM_PROJECTPROPOSER
SAP_RPM_PROJECTREVIEWER
SAP_RPM_RESOURCEMANAGER
SAP_XRPM_ADMINISTRATOR
SAP_XRPM_USER
and the portal : acces to Project management, profolio management and designer colaboration
Can you please give me more information about of role editor?
Thanks
Danny -
Error in F110: System status CRTD is active (ORD 603625)
Hi All,
In APP, one of the vendor is going in to error .
The log says System status CRTD is active (ORD 603625)
When I check, for the particular item in vendor line item display, that is linked to the
purchase order, which in turn is linked to the internal order 603625 . The internal Order 603625 is
in CRTD status.
I think the status of the order needs to be changed to TECO.
But I have two questions here.
1. What factors should be looked in to before changing the
status of the order to TECO.
2. Why the system is not able to make a payment when the ORDER is in CRTD status.
Regards
RudraHi Rudra,
You received this error from the Status Management of the Internal Order.
1. What factors should be looked in to before changing the status of the order to TECO.
Actually, you should not change the status to TECO (Technically Complete) rather you should Release it then APP will be processed.
2. Why the system is not able to make a payment when the ORDER is in CRTD status.
Every status in the Order is assigned to the Transactions Allowed
Common Scenario
1. When status of the order is CRTD then you can only post budget to the order, you can not make FI Posting.
2. When status is RELE then you can make an FI Posting.
Ask the owner of the Internal Order to shift the status if conditions have been met.
Regards,
Chintan Joshi -
Calendar Day Link to Another Page
I have a Page which has Date as LOV with Submit With Select (This is Page 10)
e.g. User selects a date, report is displayed based on date selected. This is done using Select list with Submit. Date is populated using LOV based on query. The default value of date is Maximum of date in on of my date column.
The above think works great. No problem so far.
I want to create calendar view which is another page (This is Page 20) .
Calendar is created using Calendar wizard. In Calendar, I want to link Day to above Page. I can create day link which links back to Page 10 and also report data is displayed based on date selected in Calendar.
Now, the problem: The problem is value of Date field on above page (Page 10) is always set to default value. Although, I have said that default value should only set when session state is NULL.
So my question is why Date (Display value) is not set to value passed from Calendar Page. I have checked Session info and correct value of date is present.
What should I do to correct this problem ?
The other question is :
How to disable calendar day link when there is no data to be displayed ? At present, as soon as I create a Day link, all the Days in Calendar are linked, what I want is, to hightlight/clickable which has only some data.
How should I do this ?
Thanks
SanjaySanjay,
Instead of using the Day Link feature, you can create a link in the SQL query for the calendar region. This will accomplish both of your goals: It will pass the value to your other page, and it will only appear for days where there is a value.
If you look at the Orders page of the sample application, you'll see that the SQL for the calendar is :
select '<a title="Order Detail" href="f?p=&APP_ID.:29:' || :APP_SESSION || '::::P29_ORDER_ID:' || order_id || '">' || to_char(order_total, '$999,999') || '</a>
' ord, order_timestamp
from demo_orders o, demo_users u
where o.user_id = u.user_id and (u.user_name = :APP_USER
or :APP_USER = 'ADMIN')
The query returns two columns: The value to display, and a date. In this case, the value to display is a link to another page. The link passes a value for the P29_ORDER_ID value.
Documentation for the link syntax is available here: http://download-west.oracle.com/docs/cd/B14117_01/appdev.101/b10992/mvl_fund.htm#sthref446 -
Removing Phantom assemblies from Demand (Ord Res/ Dep Req) & CO24
Issue 1) I have the issue that I want to maintain Phantom Assemblies with sp procurement key 50 but I want the components in the Phantom assemblies to show as Ord Res / dep req directly to the Top level item and not to his Phantom?
Is there any way of ignoring the phantoms in the stock requirements list. The business wish to see demand for the procured items coming straight (or linked) to the Top level assembly.
Issue 2) Can anyone show me how get the Sales order on the Missing parts list CO24? It is a field to be used but when I select and it comes on the layout the data is blank ?
Cheers Milton -
How to put effects on multiple linked clips simultaneously
I want to dynamically link all of the vocal clips at the same time, if possible, from a Premiere Pro CS4 Project to Soundbooth CS4 and "warm" them up a bit in a sort of batch process. Can this be done, kind of like precomposing in AE or using an adjustment layer? They were all recorded in an interview setting and are virtually identical--just two people with same mic, etc.
Thanks, everyone.I am not adding an effect. I am adjusting ONE single effect within multiple clips that have multiple effects. if I just copy and paste it copies ALL the effects, which I do not want, because I have different effects for different clips. i.e. different color schemes etc.
In otherw ords, I wnat to be able to EDIT effects in multiple clips. E.G, I have added color correction, "looks" filter, etc to multiple clips. I just want to change ONE of those effects in multiple clips without disturbing the rest of the effects in those clips.
Maybe you are looking for
-
Photosmart C6180 Print Quality Problem
For some reason I am getting mottled output when printing photos. I'm using HP Premium photo paper, settings are on automatic, and I've tried printing from HP Photosmart Essential and directly from the printer with the photos on an SD card. The resu
-
Logic Express 7 and imac Intel Core Duo
I recently bought both items mentioned above but havent had the time to install LE7. Should I bother? I read through some posts and it seems they are incompatible.. I dont live in the USA so the send in CD for an upgrade option may be difficult
-
I am not able to see the installed BI content object in the DWB
Hi , I am not able to see the installed BI content object in the DWB and the BI server is new one, this is the First BI content info object I am installing. for example I have selected 0Account BI content info object for installation I followed the b
-
IMS 5.1 and iDS 4.13 Upgrade
Hi all, I'm putting together an environment for testing an upgrade from iMS 5.1 through to the current JES versions and I can't locate a copy of iMS 5.1 and iDS 4.13 - does anyone have a URL that they can be downloaded from? I have them running in pr
-
Error writing to file: C:\Config.Msi\166d77.rbf
error writing to file: C:\Config.Msi\166d77.rbf, Verify that you have access to that directory. Receive above error msg during install and uninstall