Po prices is not updateing from inforecord

Guru
In Po when enter the Material & QTy & Price for that material is appering from info earlear now the problem is that Price is not picking from the last Po or Inforecord what must be problem. can u help me
Thanks
Sudhir

Hi
Price from inforecord has following steps
1) System will search for inforecord with valid price if it finds then the price will be pulled to PO
2) If there is inforecord and no valid price then system will look for last PO to pull the price.
3) If there is no info record then we have to enter the price manually.
In your case check the above prerequisites additon to that
1) If it is refering the last PO no then check whether the item is deleted or not.
2) If it is refereing the valid price in info record then check the validity period of the PIR.
Hope it helps.
Thanks/Karthik

Similar Messages

PO price is not picking from Inforecord

Hello All,
When PO is created by one particular user the price is not picked from inforecord. Inforecord validity periods are active and this price is not of previous purchase order. The problem is only for this user. Can you please advice what needs to be done here.
Thanks a lot in advance.
Best regards,
Raji

Hi,
1. Check out user profile whether EVO parameter is maintained properly for all the users.
2. Check in EVO parameter key you set radio button on Always copy.
EVO is parameter ID for Defining Defualt values for buyer. Relevent customization carried out in SPRO --> Mat mangt --> Pur --> Env data --> define default value for buyer.
Rewards, if helpful to you.
rgds,
rajesh

WHY Price is not defaulted from inforecord in a P.O with material group.

When i tried to create P O for a material group & i mentioned material text, Price was not defaulted in PO from inforecord unless i mention inforecord number even if i mentioned vendor & valid inforecord is exist for the same material group & vendor.

Hi,
Data will be adopted only from PR,RFQ & contract.Eventhough if u maintained inforecord, data will not flown from info record it is only the price picked from inforecord.
thanks
suresh

Condition Record Price is not updated in Inforecord

Dear Experts
For a material , the price in the condituion record is maintained as below.But in the info record the value is showing as 14 , instead of 10 at present.
Validity from      Validity to      amount
3/2/2008     3/30/2011     14
3/31/2011     3/31/2011     10
4/1/2011     4/30/2011     14
5/1/2011     12/31/9999     10
please help how to get the condition record amount in Inforecord.
Thanks
chandra

Hi Chandra,
You should run the program "RM06INP0" with SE38 to update the latest prices in PIR.

Inforecord Efective price is not Updating

Dear All
I have seen that the Effective price is not updating in Inforecord.
Kindly can I know why it is not updating?
I am Maintaining gross price condition
eg:ZM00 8:00/-
Result: Condition
Net Price: 8.00/-
Effective Price: 0.00/-
Regards
Chaitanya

System can only update Net or Effective price in the info record based on the customizing setting made.
sproMMPIR---Define price history.
Reg,
Deepak.
Edited by: deepak k b on Oct 30, 2008 7:22 AM

Delta records not updating from DSO to CUBE in BI 7

Hi Experts,
Delta records not updating from DSO to CUBE
in DSO keyfigure value showing '0' but in CUBE same record showing '-I '
I cheked in Change log table in DSO its have 5 records
ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M - -1
ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M -   0
ODSR_4LIF02ZV32F1M85DXHUCSH0DL -   0
ODSR_4LIF02ZV32F1M85DXHUCSH0DL -   1
ODSR_4LH8CXKUJPW2JDS0LC775N4MH -   0
but active data table have one record - 0
how to corrcct the delta load??
Regards,
Jai

Hi,
I think initially the value was 0 (ODSR_4LH8CXKUJPW2JDS0LC775N4MH - 0, new image in changelog) and this got loaded to the cube.
Then the value got changed to 1 (ODSR_4LIF02ZV32F1M85DXHUCSH0DL - 0, before image & ODSR_4LIF02ZV32F1M85DXHUCSH0DL - 1, after image). Now this record updates the cube with value 1. The cube has 2 records, one with 0 value and the other with 1.
The value got changed again to 0 (ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M - (-1), before image &
ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M - 0, after image). Now these records get aggregated and update the cube with (-1).
The cube has 3 records, with 0, 1 and -1 values....the effective total is 0 which is correct.
Is this not what you see in the cube? were the earlier req deleted from the cube?

Price was not picking from the Condition type for Item Category 'P' in PO

Hi Experts,
I Created one condition type based on Material and WBS which price was fixed based on this
I used the Purchase Order having Item Category P or Q Price should pick from the condition type where I mapped the WBS Element and Material.
The Net price was not picking from the Condition type Record. Why? What should be the Problem?
Whether my logic is correct or not?

The Scenario: I want to fix the Material price base on each WBS Element for a Project. For each WBS Element the Price will be various for same material.
Please help on this.
Thanks
Muthukumar

Hi,
In standard configuration you cannot set item delivery date as a pricing data.
Maybe you shoud look at SAP enchancement - in dedicated structures you can pass additional item data (structure KOKMP).
IMG link:
Materials Management -> Purchasing -> Conditions -> Define Price Determination Process -> System Enhancements
hope it helps.
regards,
wojciech

After I sync with iTunes my iPad Calendar is not updated from my computer where I keep my dates on Abacus. It used to do this. What's wrong?

After I snync with iTunes my iPad Calendar is not updated from my computer where I keep my dates in Abacus. It used to do this.

Follow the instructions of tt2 in: https://discussions.apple.com/thread/5822086

Lync 2013 Photos will not update from AD

I recently joined a company who has Lync 2013, Exchange 2010 and AD is at a 2003 functional level. We are experiencing issues where Lync photos are not updating from AD correctly. I have checked the pre-reqs; Replicate this attribute to the Global
Catalog is set for the ThumbnailPhoto attribute. We are also forcing photos from AD only (or no photo) by setting the following:
"Set-CsClientPolicy -Identity PhotosControl -DisplayPhoto PhotosFromADOnly"
and finally we are setting the photo in ad using:
"Import-RecipientDataProperty -Identity "Test User" -Picture -FileData ([Byte[]]$(Get-Content -Path "C:\pictures\testuser.jpg" -Encoding Byte -ReadCount 0))"
The pictures being uploaded are under 10KB and update within Outlook but never updates on Lync. I have also manually tried running the "Update-CsAddressBook" command from Lync and waiting 24hours + but the photo will not update in Lync. I have
also tried a 3rd party utility that grabs the attribute directly from each DC individually and each node is displaying the correct photo. Any Ideas?
EDIT: I did some more testing and can say with quite a bit of certainty there is something not quite right on the Lync side of things. I started with the company over a month ago and although users can see my original photo that was added to AD, I myself
do not even see it loaded in my client yet. I've completly dumped my local Lync cache but no change. Is there a specific Lync Server service that handles retrieving/pushing photos to the Lync clients?

Thank you so much for your reply, it was very helpful in understanding how the service is suppose to work however I have still not been able to correct the issue.
What I have found by using your article may have narrowed down the scope of the problem. I was able to find that on our Lync file store, the cached contacts/photos are being updated daily (as expected) and actually contain the correct photos. I confirmed
this be using abserver.exe on the .lsabs file and then locating the contactID for a few users I know are not updating properly. Once I have their contact ID I simply look for their .photo file in the cached files, copy it out to a different location and change
it to a .jpeg. To my surprise the photos are actually the correctly updated ones, so why are these no getting to the users/clients? I have gone through and deleted my local cache folder as well as the registry key HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Lync
but unfortunately no change on my Client. I still see these users original photos.
Another piece of the puzzle; We are also working on letting mobile devices connect to our Lync infrasructure as well. This is not fully functional yet however during my testing I did get Lync client for android running for a little while and low and behold
the pictures are actually correct on my mobile device!! Surely this must give some kind of clue?
We are planning to upgrade Exchange from 2010 to 2013 and I hoping that leveraging the HiDef photo capabilities for Lync 2013 with Exchange 2013 may fix this issue. What do you guys think?
More info on the environment:
4 main sites + remote users
~7DC's - 2003 DFL (1 at each site + a few at HQ)
3 Lync Front end servers (2013) (All located at central HQ)
2 Lync edge server (2013) (All located at central HQ)
1 - 2010 Exchange server (Located at central HQ)
2013 Lync Client version 15.0.4675.1000 MSO 15.0.4675.1002 64bit
About 100 HP 4110 Lync Edition Desk phones
Users's workstations are either Windows 7 Enterprise or Windows 8.1 Enterprise

IPad 2 will not update from version 4.3.5 (8L1).

I got an iPad 2 from work and it will not update from version 4.3.5. There isn't even a software update option in settings. I have reset and erased it a few times, and still no update option. I have plugged it into my computer to try to update it that way and every time iTunes prompts me to download and update the latest version, it loads for a few seconds and then I get an iTunes message that says "The IPad software update server could not be contacted. Make sure your network settings are correct and your newtwork connection is active, or try again later." the network connection IS active, I can use safari, and I have "tried again later" and still no update. PLEASE HELP!

Naalamc wrote:
It's an ASUS, Windows 8, Version 11.1.3.8
Thank you.
Your iPad has iOS 4... See Here > http://support.apple.com/kb/HT4972
OR...
Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch

My contacts are not updating from the iCloud. How can I actively go and retrieve them?

My contacts are not updating from the iCloud even with "push" on. How can i actively go and retrieve them?

Hello there, Lk354.
The following Knowledge Base article offers up some great recommendations for troubleshooting issues with using iCloud Contacts:
Get help using iCloud Contacts
http://support.apple.com/kb/TS3998
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

INCO TERMS NOT PICKING FROM INFORECORD

Sir,
With the help of Inforecord i am trying to create a PO
Incoterms are not picked from Inforecord it is picked from Vendor master.
How can i pull these setting
regards
amey

Hi Amey,
The Inco-term you have maintained in info-record will populate in the Inco-term field in Item - Delivery tab.
If it is populated, it would have precedence over the header Inco-term.
If helpful award points
Regards,
Vivek

Price is not transferred from materail contract to po

Dear Experts,
When i create a service po , the price is not transferred from material contract to po , for material po it is working fine.In debugging i got to know that it is picking up purchase requisitions package number , and not contracts package number.Can u guys help me out wid dis,my all UAT is pending becoz of this issue
Reward points for helpful answers
deepthee

hi,
when you create a service po, the prices from the Contract Service line items will flow down to Service PO when you make service selection in Service PO.
when you create servcie PO, and you enter item cat 'D', you have the option to select the servcies from your Contract by 'Service Selection' button.
If you use this, the price from contratc will flow to PO. Otherwise the prices will not flow.
Regards
Seema

Status is not updated from delivery to sales order item.

Dear Folks,
One user created sales order with 10 line items and he created delivery and later he deleted line item 30 in that delivery document and with remaining 9 line item he done the PGI & Billing.Here what is the problem is the deleted line item in sales order status showing as completed and delivered quatity showing as 10.Status is not updated from delivery to sales order item.Please let me know how to resolve this?
Thanks & Regards,
murali.

Dear Murali,
Please go to VTLA transaction then select your delivery and order types after that go in to the details of the item level settings here you check field called Update document flow under Control data tab.
I hope it will help you,
Regards,
Murali.

In material master standerd price field not updating in group currency

In material master accounting 1 tab, under price and values table. standerd price is not updating in group currency.
Can you sugest me how to resolve this issue

Hi,
As per My Knowledge,Wht ever currency is assigned as company code currency , tht will only be updated in Material Master as Per standard.
Thanks
Goutam

Po prices is not updateing from inforecord

Similar Messages

Maybe you are looking for