PO prices non - editablw while referencing contract

Dear All,
I have created a contract and assigned to PR. While converting the same assigned PR to PO, i want to make the PO price and tax code field not ediatble as that will flow from contract.
Is it possible with same PO doc type ( as same PO doc type is used for POs without reference, with RFQ etc)
Or i need to create separate PO doc type for release orders and do the settings for theis new PO doc type.
Or is there other way wher in I can restrict user so that he can not change the prices when PO is created with referencing a contract.
Regards,
Rakesh

HI RAkesh,
You need to go for a seperate document type for release PO's to meet your requirement. Then u configure field selection for the new doc type
Hope this clarified ur doubt

Similar Messages

Popup : OrgUnit doesn't exist. while creating Contract in SRM 7.0

Hi Experts,
I am using Extended classic senario and upgraded from SRM5.0 to SRM7.0.
While creating Contract I am getting popu : OrgUnit doesn't exist. This error is not stopping to create contract.
How to remove this error popup? please suggest.
Reg,
Rajesh.

Hi Rajesh,
I am also getting the same message while creating a contract in SRM 7.0.
we have upgraded from SRM 5.0 to SRM 7.0
Whether you have raised any OSS message
Regards
G.Ganesh Kumar

PO Price - Non Editable {capture from Info record only}

Hi Experts,
My client want - PO Price always populated via info record & its in non editable mode.
What the config required to achieve it.
Please guide.
Regards,
Jackie

Hi Piyush & Seesen,
Thanks for your reply.
Now system doesn't allow user to maintain price manually in PO, it captures it from Info record. But still i am able to modify inforecord price.
How can i grey out PO Price {non editable mode in PO}
Please suggest.
Regards,
Jackie

Best Practice while creating Contract, Purchase Requisition, Purchase Order

Hi
What is the best practice with respect to Contract & Purchase Requisition?
IN T Code ME31K, there is a button Reference to PReq, meaning that we can create contract with using Purchase Requisition. (We have done the same)
While creating the Purchase Order using Contract, we could find Purchase Requisition reference in the Purchase Order; similarly when we created the Purchase Order using Purchase Requisition, we could find Contract reference in the Purchase Order.
I have done the following:
1. Create a Contract.
2. Create a Purchase Requisition
3. Assign Requisition and Create Purchase Order using T Code ME57.
4. Create Purchase Order
Here in this case we could find references of both Contract & Purchase Requisition.
I just want to know what Practice should we adopt / advise while creating Contract, Purchase Requisition. & Purchase Order?
Regards,

Hi,
In ME51N Screen, enter Contract number in the "AGREEMENT" TAB and if more items in the contract, you can mention the item number in the next TAB to the AGREEMENT TAB and then proceed with creating PR by entering other details. This TAB you can find in the 4th column from extreme right end of PR screen.
Regards,
Biju K
Edited by: Bijay Kumar Barik on Sep 10, 2009 2:23 PM

BADI to uncheck Invoice indicator and set net price as 0 while creating PO

Hi all,
Is there any BADI to uncheck the Invoice indicator and set the net price as "0" while creating Purchase order?
Im creating Purchase order in SRM and for certain vendor and material group net price should be set to zero and invoice receipt to be unchecked so that user wont get invoice receipt.
Can anyone tell me how to do this?
Thanks,
Amal

Pradeep,
Thanks for your response.
I will tell you the actual senario im having.
Using Shoppin Cart, user will order for some items in SRM and once it was completed PO will be created in R/3 system. Here(R/3) when i check in ME23 for the created PO, the IR flag has been set. But i want the PO should be created as IR flag not checked and amount is changed to ZERO for certain vendor and material group combination.
I searched some threads and found few function modules ( BBP_PD_PO_GETDETAILS, BBP_PD_PO_UPDATE, BBP_PD_PO_SAVE) which can be used in BADI BBP_DOC_CHANGE_BADI. But im not aware of the fields in which we can found vendor, material group, amount, IR indicator.
Can you please guide me how to resolve this?
This is my first task in SRM and im not aware of all terms in SRM.
SRM version: 4.0
R/3 version: ECC 5.0
Thanks,
Amal

Price condition determination for purchasing contract(ME31K)

Hi Experts,
     It is possible to apply price condition determination in purchasng contract(ME31K)? We had maintain the price condition for below keys: WBS/Material number and this condition record work well in purchase order. But I hope that this condition record is applied in pruchasing contract when we create contract by ME31K. Plz kindly give me a suggestion.
So I want to check the condition dtermination is whether fullfil my requirement. If we can not use the price condition determination to get the net price, then we only go for user-exit to get it.
Thank you very much in advance.

>
Gangrong Chen wrote:
> Hi Experts,
>
>      It is possible to apply price condition determination in purchasng contract(ME31K)? We had maintain the price condition for below keys: WBS/Material number and this condition record work well in purchase order. But I hope that this condition record is applied in pruchasing contract when we create contract by ME31K. Plz kindly give me a suggestion.
>
> So I want to check the condition dtermination is whether fullfil my requirement. If we can not use the price condition determination to get the net price, then we only go for user-exit to get it.
>
> Thank you very much in advance.
Why not, in me31k, click on condition button on toolbar for item conditions and for header conditions, click on menu bar path HEADER>CONDITIONS and maintain your conditions accordingly.

Generate Source List while creating Contract/Scheduling Agreement

Hi,
My requirement is that the Source List for the particular Material / Vendor should be created automatically when I am creating a new Contract / Scheduling Agreement.
How can this be acheived.
Thanks in Advance,
Manju.

Create an LSMW so that while loading contract itself you can also load source list.
Regards
Mohan

Getting error message while creating Contract through BAPI

Hi
I am getting a 'Specify either address number or address handle' message while creating contract from BAPI BAPI_CONTRACT_CREATEFROMDATA. Can someone please tell me what can be the cause.

Hello Bharati,
you need to give the value of the constant by selecting from the source parameter.Hope this answer helps you.
Assigning Points = Thanks in SDN
Thanks & Regards
Jai

HT201289 Aperture keeps 3.6 on Yosemite keeps going "non responsive" while trying to create a new vault or back up to an existing vault. Any help would be great.

Aperture keeps 3.6 on Yosemite keeps going "non responsive" while trying to create a new vault or back up to an existing vault.
Any help would be great.

Where is your vault stored? Is it on a drive with the correct formatting - MacOS Extended (Journaled)?

HT2534 i am not getting "none" option while creating an apple id without using credit card.

i am not getting "none" option while creating an apple id without using credit card.

To get the none option, sign out of anything apple you're signed into. Go to the app store and try to download a free app, any free app. Instead of signing in, take the option to to make a new apple ID. Then go through the steps to make the ID and you'll see the 'none' option.

I m not getting the none option while creating apple id without credit card.. i m using iphone 4s

i m not getting the none option while creating apple id without credit card...i m using iphone 4s

( Use a computer and pay Particular Attention to Step 3...)
Create a New Apple ID without a Credit Card... http://support.apple.com/kb/ht2534

HT2534 im unable to get the none option while proceeding with itunes,,.please help me

im unable to get the none option while proceeding with itunes,,.please help me

Please help me understand your question. (What happens in vagueness, stays in vagueness.)

Can PO price be adopted automatically from Contract w/o reference.

Hi,
Normally when we reference a contract for creating a PO, the price gets copied from the contract.
If I have a contract and create a PO with the same Material/Vendor/Plant combination without any reference to the contract, the system gives a Warning message "A Contract exists" before saving.
Is there any possibility that we can make the system to adopt the contract price automatically even in this case?
With Regard,
D.Desigan.

Hi,
The answer is No AND yes.
No, the price from the contract will only be used if you link the PO to that contract. If there is no link than the price will be taken from the info record.
Yes, if you run a simple ABAP that will copy the price from the contract to the info record.
Steve B

Price in P.O should be in Display mode while refering contract

Hi Experts,
I created a contract with material X and unit price Rs. 10.
I am creating Purchase order refering the above contract. Now the price adopted from the contract is in changeable mode.
I want the price should in non changeable mode ( display mode).
Have you come across any configurations, BADIs and etc??
Thanks in advance for your time and suggestions
Kr
Senthil

Hi Nazrin,
Thanks for your quick reply..
I already tried this option, If we change the field selection as display mode, system marks the price as display but still in item tab PB00 is editable.. If we change PB00, it automatically changes the price. so the later one defeats our purpose.
I know we can change PB00 condition type as unchangeable in Config but I think its not advisable to change the condition type. Or we need to create a new condition type for this scenerio which is again is headache..
Is there any other way or exits available? P.O price should in display while refering to a contract.
Thanks in advance
Senthil

Price is not Picking from Contract while making PO

Hi Gurus,
Value Contract for services is created, While making the Purchase Order the price is not picking.
Note:-The Contract is in Valid Period only.
Can any one tell me what reasons may be there.
Regards,
Prabhakaran M

As a std procedure while creating PO price won't be picked from contract. Rather you need to create a PO w.r.t the contract. In that case PO will take the same conditions stored in the contract.
Else if you are working with sourcelist, then you need to define the contract as a source of supply. In this case when you create PO system will pick Contract as source and contract price will appear in PO.

PO prices non - editablw while referencing contract

Similar Messages

Maybe you are looking for