PO print issue with output type

hello,
i have maintained a output type for a purchase organisation in MN04, VN partner keep blank , medium 1 for print out and in date time : 4
output device is 'LOCL'  "print immediately" and "release after output" are active in communication.
a message type generated when i created a PO, but it is a red light, and processing log is "Error in OPEN_FORM for document xxx".
how to resolve this problem?
best regards,
Edited by: colin hong on Nov 11, 2010 5:25 AM

Hi,
   With the help of ABAP'r, please check the Custom Scriptform...
Also chk "http://help.sap.com/saphelp_nw70/helpdata/en/d6/0dba1a494511d182b70000e829fbfe/content.htm"
1. Re: difference between open_form & Start_form (urgent)
Regards
GK.

Similar Messages

  • Script Form print issue with output type

    hello,
    i have maintained a output type for a purchase organisation in MN04, VN partner keep blank , medium 1 for print out and in date time : 4
    output device is 'LOCL' "print immediately" and "release after output" are active in communication.
    a message type generated when i created a PO, but it is a red light, and processing log is "Error in OPEN_FORM for document xxx".
    after checked, custom script from caused this issue, but how to resolve this problem?
    best regards,

    Hello,
    The error ME142 can have different causes like missing authorizations
    or a terminated connection. Please see SAP notes 397691 and 532251. This note
    states that is errors occur when purchasing documents are output, If
    errors occur when purchasing documents are output, the system generates
    an error message in the message log of the message overview. However,
    error message ME142 'Error in OPEN_FORM for document &' contains only
    the information that an error occurred and not the error cause. With the
    attached source code, the error cause is also displayed in the error
    message.
    Regards,
    David

  • Printing issue in smartform with output type

    Hi ,
    I am facing issue while I am taking print from zebra printer.
    I am trying to take a print from MB90 but its not coming but its giving status 'processed' and same from the spool, in spool its showing status complete but not giving any printout.
    if I m attaching  my smartform with another output type which already working for another label(smartform), then its giving print.
    So, what I want to know..
    Its can be a problem with output type config or from basis side.
    Please help.
    Thanks,
    Sandeep

    well i have seen setting are correct but having one issue it doesnt trigger automatically I do it manually from MB90 and rest of the things are correct becaoz i have seen while debug its going correct form from driver program, when i am runniing from MB90 manually .
    Thanks,
    Sandeep

  • List of script and smart forms(except TNAPR) with output type or print prog

    How to find out List of SAP SCRIPT and SMART FORMS (except TNAPR)with output type or print program..I like to chk in output type WMTA  whch form should use.kindly help on this

    Hi
    WMTA is special msg and doesn't create any print: so you can't find a sapscript or smartform to link to it.
    WMTA is a message for delivery, so you can find it by NACE trx or TNAPR table (It's the same): infact here it can find only all messages of logistic modules (SD & MM).
    The routine ENTRY of RLAUTA20 is called by WMTA and creates a Transfer Order (for WM, Warehouse Management, module), so if you need to create a print for that msg you need to change prg RLAUTA20,
    Max

  • Auto adjustment of page orientation causes printing issues with documents that have a page width greater than its page height.

    Hi,
    Since an upgrade from Word 2003 to Word 2010, we are experiencing printing issues with certain
    documents that have a page width greater than its page height.
    In Word 2003, it was no problem to set the page width greater than the page height while setting the page orientation to "portrait".
    In Word 2010, this seems impossible: despite leaving the page orientation to "portrait", if one changes the page width/height as stated,
    Word 2010 automatically adjusts the orientation to "landscape". Resetting the orientation to "portrait" will flip the page's width/heigth settings.
    This behaviour causes printing problems: the page prints out 90° rotated.
    I do not believe this is a printer driver issue: I tried several different printer drivers, and all give the same (bad) result. Setting the printer driver's page orientation settings (before printing) makes no difference, as
    Word 2010 seems to force the page orientation settings.
    Inserting the documents 90° rotated is not an option, since it causes problems with the printing margins.
    This is very annoying, since we have to print official documents of a municipality (driver's licences).
    Is there a workaround for this issue?
    Regards,
    Laurent Grandgaignage
    Sysadmin Gemeentebestuur Stabroek, Belgium

    Hi
    Thank you for using
    Microsoft Office for IT Professionals Forums.
    From your description, we can follow these steps to test this issue
    Step 1: Repair Office 2010
    1.      
    Click
    Start, and then click Control Panel.
    2.      
    Click
    Programs and Features.
    3.      
    Click the
    Office 2010 program that you want to repair, and then click
    Change.
    4.      
    Click
    Repair, and then click Continue. You might need to restart your computer after the repair is complete.
    Step 2:
    Rename the global template (Normal.dotm)Follow the steps for the operating system that you are using:
    Windows Vista and Windows 7
    a)      
    Exit Word 2010
    b)      
    Click
    Start.
    c)       
    In the
    Start Search box, type the following text, and then press
    ENTER:
    1.      
    %userprofile%\appdata\roaming\microsoft\templates
    d)      
    Right-click
    Normal.dotm, and then click Rename.
    e)      
    Type
    Oldword.old, and then press ENTER.
    Microsoft Windows XP
    a)      
    Exit Word 2010
    b)      
    Click
    Start, and then click Run.
    c)       
    In the
    Open box, type the following text, and then press ENTER:
    %userprofile%\Application Data\Microsoft\Templates
    d)      
    Right-click
    Normal.dotm, and then click Rename.
    e)      
    Type
    Oldword.old, and then press ENTER.
    f)       
    Close Windows Explorer.
    How to troubleshoot print failures in Word 2010, Word 2007, and Word 2003
    http://support.microsoft.com/kb/826845
    Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
    I can do for you, please feel free to let me know.
    Hope that helps.
    Sincerely
    William Zhou CHNPlease remember to mark the replies as answers if they help and unmark them if they provide no help.

  • [Applet]Printing issue with pdf files on Xerox 4595

    Greetings !!
    I'm trying to print to a Xerox 4595 printer from a Windows XP station (limited account) using a Java Web Applet.
    This applet generates pdf files which have to be printed.
    The Xerox 4595 uses a printing queue that is detected by the Applet.
    The problem is the following: usually when printing a simple local file from this computer there is a box that asks you your login to let you create a job and then print.
    When using the Java Applet, there is no way to have this print box displayed. We have the Java Print Dialog but once clicked on "Print" there is no box displayed to pass the login to the printer and let us print.
    Is anyone already worked with Xerox 4595 and experienced such issue ?
    How can I, using the Java language and modify the Applet, ask the printer to send me the dialog box asking for the login ? Without this login no jobs are accepted and we can't print the generated pdf files.
    I looked on the printer queue settings and it seems that the Xerox uses the IPP to communicate with the local computers in the office.
    The server from which the Applet is used is a openSuSE Linux Web server (apache2)
    How come using Linux workstations any pdf files are printed (on shared printers such HP laserjet) and under windows there is jammed characters and sheet feed instead ?

    A lot can depend upon which app your are using on your tablet device, the same applies to computer programs but apps are much worse.
    Which app are you using?
    I would try the free Adobe Mobile Reader. This product seems to support more features than other apps.
    There could even be issues with the type of tablet you are using. The Apple line may work better then Android devices since there is QA check and approval by Apple.
    Another factor is the how the PDF was created.
    How well are the maps displayed on your laptop or desktop? Try different values of zoom.

  • KE30 decimal not display in quantity column with output type object list

    Hi everyone,
         I already set number format "0.000" in change form screen but when I execute report with output type object list (ALV) that report don't display decimal in quantities column e.g. 0.470 displayed to 0 .
        How can I set number format in output type object list on Transaction code KE30?
    Thanks in advance.
    Pipit

    Hi,
    Better to raise this issue in CO Forum. You can expect some solution.
    regards

  • Issue with Message Type Triggering during Inbound Delivery Creation

    Hi Experts,
    Hi Experts, 
    Currently we are facing issue with message type triggering during inbound delivery creation:
    In NACE transaction for Inbound delivery we have 3 custom output types:
    Pricing Procedure Used is standard one -> E10001
    Z140  Inbound Delivery Create  (This should get triggered when IB delivery is created)
    Z141  Inbound Delivery Change (This should get triggered when IB Delivery is changed)
    Z142  Inbound Delivery Delete(This should get triggered when IB Delivery is deleted).
    At present if i check delivery in  VL33 -> Extras -> Delivery Output
    Both  Z140 and Z141 are being triggered during IB delivery creation. While it should be only Z140.
    Could you please suggest that are we missing any configuration in SPRO or we need to create any custom routine (requirement) to handle this?
    Thanks

    Hi,
    There is no fine-tuned control for inbound delivery messages as for Purchase order. Hence I guess to meet your above requirement, you have to go for a custom solution similar to the PO fine tune control settings.
    Thanks,

  • Print a invoice output type on two printers

    Hi,
    I want to print a invoice output type on two printers simultaneously.
    Is there is any ways to assing this.
    Regards,
    S

    Hi,
    From SAP at a time only single printer can print the Output.
    But once the spool request is generated, in the OS level with the help of network people on SPOOL SERVER you can distribute that Spool request to multiple printers.
    Regards,
    Anji

  • How to send invoice through email with output type RD00?

    What are the configuration settings to send invoices through email with output type RD00?

    Hi,
    Please go through the following links:
    [E-mail|Email Configuration Settings]
    [e-mail|Re: EMAIL BILLING DOCUMENT TO CUSTOMER THROUGH SEND MAIL OPTION IN VF02]
    After triggering the output,goto T.Code SOST and process it.
    So that e-mail will be triggered immediately.
    You can use External send/EDI/simple mail for this.
    Regards,
    Krishna.

  • Our software vendor tells to use FF 3.5.1. because of some printer issues with their web based program. How safe is it to work with FF 3.5.1 in 2012?

    Our software vendor tells to use FF 3.5.1. because of some printer issues with their web based program. How safe is it to work with FF 3.5.1 in 2012?

    Thanks for the reply. I'll have a look at your solution.

  • Strange Printing Issue With New HP & Pages

    Hello!
    I have a very strange printing issue with a new HP printer. I have written pages documents heavy in Texts which are located within tables. The documents print fine on a Cannon and Epson printer and look great but when I print the document on my new HP Laserjet Pro 400 Colour M451nw some of the text on some rows come out of the printer looking like they are bold / slightly fuzzy. This only happens with some of the rows of text, not all of them. The font is the same in every row with the same format.
    You can see this in the attached image. The first line (Thanks very much) has printed correctly but the subsequent lines look bold / slightly fuzzy.
    After a lot of testing the only way I can resolve this is if I copy the content into a new pages document and only then it will print and look ok with the HP printer.
    This must be a problem within my origional document. I would simply copy and paste everything into a new document however this would take a very, very long time (over 5 years of work producing teaching materials and over 100 documents and thousands of tables and formatting that cannot be copied and pasted).
    Also, on other printers you can see the lines seperating each row of the table. These lines are not visible on the HP print outs, even when the table is copied into a new document.
    Has anyone come accross an issue like this before? Is there a way I can fix this without creating a new document? Do I need to get a new another new printer (the 4th printer this week!)?
    Any advise, wise words would be greatly apprechiated!
    Thanks!

    Sorry, Fruhulda. After 4 hours on the phone with Apple care they are taking this issue further themselves. It seems to be a problem with our pages document and the compatibility with certain drivers. We have still not gotton to the bottom of it and Apple are going to get back to me when they have an answer.
    We also worked out that the issue only happens when you print via Ethrenet & USB. Printing via Wifi is ok and there are no quality issues.
    Very Strange!

  • Does SAP or Oracle have an issue with these type of processors?

    Does SAP or Oracle have an issue with these type of processors?
    Intel Xeon X5260 & E5450    vs    Intel Itanium       PROCESSORS
    I want a Sales / Marketing URL link or white papers that talks about processor recommendations.
    SAP GUI  7.20

    > Does SAP or Oracle have an issue with these type of processors?
    >
    > Intel Xeon X5260 & E5450    vs    Intel Itanium       PROCESSORS
    >
    > I want a Sales / Marketing URL link or white papers that talks about processor recommendations.
    SAP does neither "recommend" nor "deny" any processors.
    If you check http://service.sap.com/benchmarks then you get a lot of machines with different CPUs/operating ssytems and database combinations.
    Choose the one that suits best for you.
    Markus

  • Issue with paper type when remote printing

    Hello
    we have an issue with printing from redirected printer
    on the local machine Windows 8.1 i have a printer installed and when i try to print from a remote pc to my installed printer on my local pc the paper type is replaced.
    on the local printer it was set to letter but on the remote the redirected printer is set to legal.
    i try to switch it to letter but it was not kept it switch back to legal.
    any adviced will be good ?
    Thanks

    Hi,
    We may try to test this and will get back to you as soon as we get outcome.
    In addition, here is a Print/Fax forum below you may get more insights from print experts:
    https://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverprint&filter=alltypes&sort=lastpostdesc
    Best Regards,
    Amy
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]

  • Printing issue with pdftops for XML publisher reports.

    Hi All,
    We have recently upgraded from 11.5.10 to R12.1.3.
    We are facing a strange issue for some of the seeded reports that were converted to type XML after R12 upgrade.
    First, the reports were printed with junk / xml character while submitting the requests from application (e.g. Account Analysis Report)
    We made the following changes.
    - Added PDF Publisher style with required flag set to yes to the  Account Analysis Report.
    - Set proifle option "FND: Default Template Output Type"  to PDF   (it was blank)
    - The pasta_pdf.cfg is configured to use pdftops for conversion
    - Restarted the manager.
    After this, the above report is priting fine and pdftops is converting it to correct format before printing.
    But one of the printer that Oracle EBS is configured is getting stuck specifically for this postscript based request.  The same report prints well on another printer.
    The 'lpstat -t' shows the following status for the failing printer.
    =============
    printer PRT1 is idle.  enabled since Tue 23 Jul 2013 03:24:40 PM EDT
            /usr/lib/cups/filter/pstoraster failed
    =============
    The printer queue logs on the application servers shows the following details for the failing printer.
    =========================================
    I [22/Jul/2013:15:00:48 -0400] [Job 137] Queued on "PRT1" by "appldfin".
    I [22/Jul/2013:15:00:48 -0400] [Job 137] Started filter /usr/lib/cups/filter/pdftops (PID 13530)
    I [22/Jul/2013:15:00:48 -0400] [Job 137] Started filter /usr/lib/cups/filter/pstoraster (PID 13531)
    I [22/Jul/2013:15:00:48 -0400] [Job 137] Started filter /usr/lib/cups/filter/hpcups (PID 13532)
    I [22/Jul/2013:15:00:48 -0400] [Job 137] Started backend /usr/lib/cups/backend/socket (PID 13533)
    E [22/Jul/2013:15:00:48 -0400] [Job 137] Job stopped due to filter errors.
    ==========
    The printer that works fine on the same application server has the following message.
    ==========
    I [22/Jul/2013:15:16:44 -0400] [Job 139] Queued on "PRT2" by "appldfin".
    I [22/Jul/2013:15:16:44 -0400] [Job 139] Started filter /usr/lib/cups/filter/pdftops (PID 15825)
    I [22/Jul/2013:15:16:44 -0400] [Job 139] Started backend /usr/lib/cups/backend/socket (PID 15826)
    I [22/Jul/2013:15:16:44 -0400] [Job 139] Completed successfully.
    ==============
    It only goes through 2 filters and prints just fine
    The system admin team has tried to re-install the printer driver but no luck.
    Any idea what could be the cause and how can fix it?
    Any pointers will be highly appreciated.
    Thanks
    Sunil Bhavsar

    Thanks Hussein.
    I will check the 2 options you recommended. At the same, I would like to test the direct print from the OS using pdftops utility.  But not sure how can I do that?
    The concurrent request creates the .tmp file under APPLTMP and pass that as the parameter while printing such requests. But if we need to test the .PDF output using pdftops directly, what should be the syntax? Or I would say, what should be the input file and output file?
    e.g.
    pdftops {infile} {outfile}
    I have got the .PDF output under $APPLCSF/$APPLOUT. But from one of the failed request logs, I see the system passes both as .tmp. If we need to test this directly, is there any way?
    In the meantime, I will check the debug logs option and update if it provides any additional information.
    Regards,
    Sunil

Maybe you are looking for

  • Can i use java only for database transaction with vb as a front end

    Hello All. I am sorry,i don't know whether this location is the correct location to post my question or not I have developed one application using complete vb only. That is completly desktop appliation and not suitable for centralized database. Is th

  • Automated reporting on dataloads for end-users

    Dear forumers, we are on BI 70 we are looking for a way to provide our endusers with a report/query, whichs shows the status of dataloads in each cube. On forums I have found some tips on using the table RSREQDONE. Based on requests in this table, on

  • My black berry

    my blackberry curve 8520, wont turn on or even charge what should i do to try and get this to work? when i try and charge it all that comes up is the blackberry chrge sign with a bg red cross going through it. ive had this before but i figured it out

  • WHAT is an event? Really, it's totally confusing.

    Seriously, what IS an EVENT? Is it a new thing made up by Apple to utterly confuse, depress and finally totally squash a users creative flow? I have events which lead to nowhere, or lead to pictures of the same scan series but in an organizational pa

  • Backup link

    My customer needs to have backup lines for their branch offices. They have installed on each branch office a router (RV042 or TL ER6120 or ASA5505), on each branch office are installed 2 fiber optic transceiver from diferent ISPs. At headquarter they