PO Print Output- Doesn't print Chinese characters

Hi,
There is customized t-code ZME9F similar to ME9F with an added feature of e-mail to vendor.
When we process PO through ZME9F, the PO converted to PDF is not printing the chinese characters.when 'Display message' is clicked also it is fine.The print preview of the PO is fine.
Can you please let me know what is the reason for not printing chinese characters in the conversion of PDF?
Thanks in Advance,
Sowmya

Hi Soumya,
Please check note 903157.
Also the notes 812821, 83502, 776507 are helpful.
Thanks,
Ashwini.

Similar Messages

I can't seems to print using my macbook air with hp series printers. When I plug the printer via usb to my system, the printer was recognized and installed. But when i send a doc for printing, it doesn't print all . Any help?

i can't seems to print using my macbook air with hp series printers. When I plug the printer via usb to my system, the printer was recognized and installed. But when i send a doc for printing, it doesn't print all . Any help?

Greetings,
Here's a direct link to the drivers you need, they should work perfectly for your situation.

Canon multifunction cups recognized the printer but doesn't print

i've a canon i-sensys MF4120 multifunction printer that don't won't to print on archlinux 64 bit.
I've installed cups, compiled and installed the driver for the printer from AUR (cndrvcups-common and ufr2), started cups an added the printer, but when i try to print the test page cups process the job but the printer doesn't print), if i try to print from firefox cups give the following error: "pstoufr2cpca write error,32." and the job get stopped. I've tryed several re-add/delete/cups stop/star, but nothing change, the printer won't work.
dmesg give the following output
usblp0: USB Bidirectional printer dev 6 if 1 alt 0 proto 2 vid 0x04A9 pid 0x26A3
usbcore: registered new interface driver usblp
usblp0: nonzero read bulk status received: -71
usblp0: nonzero read bulk status received: -71
usblp0: nonzero read bulk status received: -71
usblp0: nonzero read bulk status received: -71
usblp0: nonzero read bulk status received: -71
Every "nonzero read bulk status received: -71" in a print job lauched but never printed (or so it seem)
don't know if it may be useful but i've uploaded here the errorlog of cups (rapidshare link...)
Last edited by allistar (2009-09-09 22:41:17)

The problem is not with your printer but with CUPS. I had the same problem with an upgrade that was done. It worked before but did not work after the upgrade in CUPS. I guess others are having problems as well as you can see in the link posted.
http://bbs.archlinux.org/viewtopic.php?pid=613329

I followed all of HP's Apple AirPrint troubleshooting instructions. Printer still doesn't print.

Using an HP Photosmart Plus B210a printer, I attempted to print both photos and emails from my Apple iPhone 4 via WIFI interface. My router is a Motorola SURFBoard SBG6580. All connections have been tested and verified active. The printer is shown on my iPhone as active, and messages following my directive to print indicate "contacting", "preparing", and "printing 1 of 2", etc. Then nothing. No print. I followed the HP's troubleshooting instructions for "Apple AirPrint: The Apple Mobile Device Shows a Job is Printing but the Printer Does Not Print", without success. I am able to successfully print from my HP Pavilion Entertainment PC with Windows 7 using the same WIFI interface without problems.
The Motorola router is a recent addition to my system. HP's prompt following my unsuccessful resolution of this problem was to post a message to see if anyone else has dealt with this problem. Thanks for your input.
This question was solved.
View Solution.

One additional step that you could try doing is to do a hard reset on the iPhone. Make sure if you have anything open that has not been saved you save those items first.
Press and hold the power and the home button together for 15 seconds. You may see slide to power off come on the screen but ignore that and continue holding the buttons until the device turns off. Depending on the exact model the device may automatically turn back on when you let go and show the apple logo, or you may have to manually turn it back on with the power button.
After the device loads back up attempt to print again.
Jon-W
I work on behalf of HP
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
Click the KUDOS STAR on the left to say “Thanks” for helping!

I have an HP 1400 all in one color printer that doesn't print

Suddenly this printer takes forever to print the "test" page and will not print from the computer. Yes, it is properly "hooked" up. I really like this printer and would hate to think that HP has become a throw away company. What can I do to diagnose this problem? It uses cartridges 21 b and 22 color.

Hi,
You could try this link that gives information about print jobs not printing:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02205477&lc=en&dlc=en&cc=us&lang=en&product=441...
If you expand on the relevant operating system it should guide you through using the print diagnostic utility.
You also mentioned that the printer is taking a long time to print a test page so this link may be useful:
http://h10025.www1.hp.com/ewfrf/wc/documentSubCategory?tmp_rule=53232&tmp_task=solveCategory&lc=en&d...
Please go to the section on slow printing.
I hope that this helps.
---- If my answer was helpful please click the Kudos star.
If your problem is solved please click the Accept as Solution button so other forum users can use the solution.---->
(I am an HP employee) I am not a expert on all our products, but I'll do my best to help you.

Safari doesn't show Chinese characters in a specific site?

Hi all,
I've just found a weird thing that Safari doesn't show Chinese character in this site.
http://blog.bcxstudio.net/
It works in Firefox (Mac and win), Chrome (mac and win), IE 6-9, Safari for Mac, but not Safari on Windows.
However, when I browse other websites like Yahoo hong kong and Apple HK. There is no problem.
http://hk.news.yahoo.com
http://www.apple.com/hk
My best guess is that the site may uses some fonts (CSS3 @font-face?) that safari did not support.
Anyone knows what happened?
I am on Windows 7, Safari for Windows 5.0.2 (7533.18.5)
Thank you!

That's a bit odd ... I'm getting the opposite effect at the moment on my XP SP3. I'm not seeing the text in IE 8 (I don't think I've got the International character sets installed for my XP Pro), but they show fine in my Safari 5.0.2.
Are you still seeing the effect at your end at the moment, b?

Print output on User Printer

Hi All,
Requirement is to print packing slip (LD00) on printer defined for each user.
I was testing functionality with " print parameter User (U) for the output type and maintained printer for each user in VP01SHP transaction. Access sequence was attached but no output condition records maintained.
As per sap note:1461071 - if no output records are found, the system will look at printer defined in VP01SHP.
Any suggestions on how to print on printer defined for each user. I have tried print parameter " User parameter (S)" also but no luck.
I can do the same functionality by adding " changedby/created by" field in fileld catalog. But this is my last option.
Thanks, Chad

The only problem that you may have with LOCL is if the drivers are different for each individual's pc, this can happen as the local dirvers are used instead of the ones for a network printer. This can completely change the printout.
We use USER as part of our print parameters and it works a treat.
I think that you just need to check that everything is beind determined properly.
Is LD00 a packing or picking list?

Formatting printer output for dotmatrix printer

Hi Experts,
i'm trying to format the output of the EPSON LQ-870 dot matrix printer to print the output in the paper size height 280 mm & width 210 mm.The device type i used for my output device is EPESCP2.For the first page the header and line items are coming correctly.But for the second page onwards, there is some space is coming between each line items.In third page,the header is coming little bit down from the required location.My page size is little bit less than the normal A4 size.How to rectify this?
Points will be rewarded if helpful.......
Thanks in advance.

Hello,
I created a condition table '550 - Shipping point/plant'. Then I created an access sequence 'ZSH1' and assigned this condition table 550 to it.
In the output determination procedure, the procedure 'V10000 - Header output' has the condition type PL02 - BOL: Single Delivery assigned to it.
The assignments look like:
Step       Counter         Cond Type
10               1                LD00     Delivery Note
20               2                PL00     Packing list
30               3                PL01     Planning Slip
40               4                PL02     BOL: Single Delivery
In Assign output procedures, the entry corresponding to delivery type 'LF' is:
Del Type                O/P procedure                       O/P Type
LF Delivery                    V10000 Header Output             LD00Delivery Note
When I try to enter a new condition record using VV21, it does not show up this key combination 'Shipping point/Plant'.
Can someone tell me if I am missing some customization?
Thanks,
Rugmani
Edited by: Rugmani Rajan on Oct 22, 2008 3:06 PM

Excel spreadsheet export doesn't show chinese characters properly

Hi all.
I've created the excel export option following the steps in Bex's book, and it's working fine, but I'm not able to export results in UTF8. I'm facing problems when the dDoctitle for some documents is in chinese.
So far, I've tried adding the charset <$setContentType("text/csv; *charset=UTF-8*")$>, but it doesn't seem to work. I've also tried setting different content types and charsets without success.
Any idea?
Thanks in advance.

Yes, I have it and I can see other chinese websites. Moreover, in Content Server, I see correctly (in chinese) the dDoctitle field i'm trying to export. In fact I've written some titles in chinese just to test it. It's in the csv file where I see the strange characters.
Thanks.

LaserJet 1018 shared on Printer server doesn't print

Hi, I'm a multi HP owner (notebook, desktop a Photosmart printer and the LaserJet 1018)... I recently bought a Iomega NAS with the printer server service and I tried to share both of my HP printers on it. The PhotoSmart 7260 works perfectly, but the LaserJet 1018 does not: it says that it have a job pending but the print doesn't start. I've passed the same nightmare when I've tried to share the printer on the Desktop PC with Windows 7 Ultimate 64 bit: job pending but no printing unless I restart the PC... on startup the print stated. I've found the way to share it with Ubuntu Server 9.10 by installing HP linux driver.Now, having this nice NAS I would like to use it as my printer server (energy saving reasons).
I've read a lot of people with the same problem but havn't find the solution. Somebody even says that the 1018 is a low budget printer and is not enabled for sharing, but it sounds bull**bleep** to me (it prints under linux). Somebody knows if and how to solve this problem? My clients are both Win7 x64 (I have to test my Ubuntu 10.10 desktop)... should I install 32bit version drivers? ore something like that? Or should I buy a new printer (!HP)???
Thanks
Alessandro

If the printer is not postscript, and you are using 'generic' then the printer is likely not understanding what is being sent to it, so it is dumping the job.
HP printers default to HPs own page desription language called PCL (Printer Control Language).
If you did not install all the 'additional printers' when you installed your OS, might want to do so.
If not, check HPs site for Mac drivers, or check out GIMP & GhostScript from SourceForge.net to see if they support that particular printer

IPad recognizes my hp wireless printer but doesn't print. Why?

iPad recognizes my HP wireless printer but still nothing happens when I press print. Why?

If your using the option at the top next to the address bar to print, that the box with the arrow, that only looks for airPrint printers. That will not work on your printer.
They do however have apps that allow you to print to your printer, you just need to get one from the app store (read the reviews before downloading the app).
I use the app "print n share" but I can't recommend that one or say its good or bad, it works for whati need it for that's all. You would need one that does what you need and works for you, that's why I say to read the reviews.

Colors are mismatched between photo and printed output. The printed output's tones are off.

This is an HP Photosmart Plus B210A printer.
I have almost-new print cartridges installed (correctly).
I have done a print quality test and the test page seems to be very good.
The paper I'm using is high-quality photo print paper.
I'm using quality setting of 'best'.
Thanks in advance for any advice.
This question was solved.
View Solution.

If it is not a hardware issue, then go into the printers folder, right click on your printer, then select properties. Select the color management tab, you can adjust colors from there.
This document below would apply to the hardware end of it:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02142902&cc=us&dlc=en&lc=en&product=4021935&tmp...
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

WPS54G Print Server doesn't print wirelessly

I am using the setup wizard, but when it is checking for the wireless setting I get a message that the connection failed. please help!!
Solved!
Go to Solution.

Hi quack thanks for your answer , unfortunately everything is correct and turned on... when I unplugged the ethernet cable just before the last step of the wizard and it is on the screen of "Now your wireless is connected" a little box appeares saying "connect fail"... But if I leave the ethernet cable plugged, the process goes "perfect", because I can print, but the server must be connected to the router wirely...
I'm starting to think if it is because the WPA key of my router, I use a WPA2:AES+TKIP,and I'm not pretty shure if the server is compatible.
Thanks for your commment!!! I wish that exist a solution!!

Sales Order is not saved when defining a Print output and without Print output it will saved the SO.

Hello,
In VA01 when we create SO and define output type then Sales order is not saved,The error msg will display like " Order is not in the database or is been archived ".
But without defining output type SO will be saved.
So is there any ABAP Developement or enhancement?
Kindly Suggest.
Regards,
Abhishek K.

Hi,
Its something like SD_PARTNER_UPDATE...
Kindly see below screenshot for your reference.
Regards,
Abhishek .K

Issue Regarding Chinese characters In Smart Form Print preview..

Hi All,
I am working on a smart form development for chinese users. The requirement is the user will login using English & when the delivery will be issued for output, a check will be done on the country of user. If that comes as china then the international version (C) maintained for that customer will come as output.
Now the problem is even if I login using EN or ZH the below issue I am facing always.
In the database I can view the details in chinese properly by logging in as ZH. During debugging also i checked the data from table ADRC & MAKT is coming in chinese properly. But when i gave the values to be output in SmartForm, it is showing the characters like how it will look if I login using EN & view the table contents.
When i view the data by changing character set as Simplified Chinese then in table i can see chinese texts properly. But when the same data goes to print preview it shows the chinese characters like as it would appear when character set is Unicode or West European..
Please help..
Thanks in advance.
Edited by: malayanayak123 on Jun 1, 2011 5:48 AM

Dear,
print preview and physical printout are two different things.
PrintPreview:
The data stream will be sent to the frontend and rendered with windows-fonts etc (for backend prints a simulation).
Printout:
Frontend: You need a printer, that maps the character, you have to use SAPWIN or SAPWINCF when using cascading fonts. The rendering will be done in the windows spooler.
Backend: Your printer needs also a mapping (look like something with UTF8). Also the printer needs the fonts installed because the rendering will be done in the printer!
If you use the pdf-printer in SAP, you need to upload all necessary fonts (TTF) for the pdf-composer. Also you need a unicode pdf printer for that.
Regards,
Christian

PO Print Output- Doesn't print Chinese characters

Similar Messages

Maybe you are looking for