PO print report request

Hello Experts,
I have a business requirement to provide a list of all Purchase Orders that were printed ie. last week.
I cannot say that I find any report that gives me that information, so do any of you have any suggestions?
rgds
GAR

Hi,
Go to ME9F select the processing status 1 (successfully processed) and appropriate output type for EF
and execute u will see all POS for which print is already taken with GREEN RIGHT mark
Diwakar

Similar Messages

  • Printing report that has a parameter with multiple values crashes jvm

    I am using BOE XI 4.0 as an unmanaged RAS.
    I am able to preview a report that has a string discrete parameter that can have multiple values.  If I give it a single value.  It previews fine.  If I give it an empty string it prints all values which is fine.  If I give it two discrete values, it displays just those two.
    However, if I try printing the report to a printer:
    1 parameter value - prints fine.
    2 parameter values - crashes jvm
    empty string parameter value - crashes jvm
    I would appreciate some direction on how to do this.  It works in crystal reports for eclipse.
    The test jsp I am using is based off of the samples.  The print test jsp is the same as the preview test with the exception of the following code differences.:
    preview report.jsp code
    // Create a Viewer object
    CrystalReportViewer viewer = new CrystalReportViewer();
    // Set the report source for the  viewer to the ReportClientDocument's report source
    viewer.setReportSource(clientDoc.getReportSource());
    // Process the http request to view the report
    viewer.processHttpRequest(request, response, getServletConfig().getServletContext(), out);
    // Dispose of the viewer object
    viewer.dispose();
    print report jsp code
      PrintReportOptions printOptions = new PrintReportOptions();
      printOptions.setPrinterName("DELL");
      try {
          clientDoc.getPrintOutputController().printReport(printOptions);
      } catch (ReportSDKException ex1) {
          System.out.println("Message - " + ex1.getLocalizedMessage());
      } catch (Exception ex2) {
          System.out.println("Message - " + ex2.getLocalizedMessage());
      clientDoc.close();

    I am using BOE XI 4.0 as an unmanaged RAS.
    I am able to preview a report that has a string discrete parameter that can have multiple values.  If I give it a single value.  It previews fine.  If I give it an empty string it prints all values which is fine.  If I give it two discrete values, it displays just those two.
    However, if I try printing the report to a printer:
    1 parameter value - prints fine.
    2 parameter values - crashes jvm
    empty string parameter value - crashes jvm
    I would appreciate some direction on how to do this.  It works in crystal reports for eclipse.
    The test jsp I am using is based off of the samples.  The print test jsp is the same as the preview test with the exception of the following code differences.:
    preview report.jsp code
    // Create a Viewer object
    CrystalReportViewer viewer = new CrystalReportViewer();
    // Set the report source for the  viewer to the ReportClientDocument's report source
    viewer.setReportSource(clientDoc.getReportSource());
    // Process the http request to view the report
    viewer.processHttpRequest(request, response, getServletConfig().getServletContext(), out);
    // Dispose of the viewer object
    viewer.dispose();
    print report jsp code
      PrintReportOptions printOptions = new PrintReportOptions();
      printOptions.setPrinterName("DELL");
      try {
          clientDoc.getPrintOutputController().printReport(printOptions);
      } catch (ReportSDKException ex1) {
          System.out.println("Message - " + ex1.getLocalizedMessage());
      } catch (Exception ex2) {
          System.out.println("Message - " + ex2.getLocalizedMessage());
      clientDoc.close();

  • AP Cheque Printing Report

    Hi All,
    Can anybody help me out to do the AP cheque printing report using XML Publisher.
    Followings are the steps I did.
    1. Create rdf and register in APPS.
    Executable is defined in Customization AP application
    Concurrent Program is in Payables application.
    2. Create Data Definition and Template in XML Publisher administrator in Payables.
    3. Attached the Concurrent program in AP Format set up.
    4. Make the Payment, The report is calling and showing completed normal but the output is not coming.
    5. Then I run the XML report Publisher and pass the request id then the output is coming as PDF.
    But the requirement is when we make the payment , The output should come and it will go to the printer for printing..
    Please help me where I made the mistake.
    or please guide me what approach I should follow.
    Thanks in Advance.
    Pradipta

    Here is my code:
    function AfterReport return boolean is
    vrequest_id number;
    v_success BOOLEAN;
    v_printer fnd_concurrent_requests.printer%TYPE;
    v_print_style fnd_concurrent_requests.print_style%TYPE;
    begin
    -- Set up printer for the following reports
    -- Get the printer and style for this report for use with the following reports select printer, print_style
    into v_printer, v_print_style
    from fnd_concurrent_requests
    where request_id = :P_CONC_REQUEST_ID;
    srw.message(999, 'Print options: ' || v_printer || '/' || v_print_style);
    v_success := fnd_request.set_print_options (v_printer
    ,v_print_style
    ,1
    ,TRUE
    ,'N'
    ,'SKIP'); IF NOT v_success THEN
    srw.message(999, 'Failure to set print options'); ELSE
    srw.message(999, 'Print options set'); end if;
    -- Submit the XML Report Publisher request to complete the printed Dunning Letters
    vrequest_id := FND_REQUEST.SUBMIT_REQUEST('XDO',
    'XDOREPPB',
    NULL,
    NULL,
    FALSE,
    :P_CONC_REQUEST_ID,
    222, -- Receivables
    'XX_ARDLPPRT_RPT',
    'en', 'N', 'RTF', 'PDF', NULL, NULL, NULL,
    NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
    NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
    NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
    NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
    NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
    NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
    NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
    NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
    NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
    -- commit to submit request
    commit;
    IF vrequest_id = 0 THEN -- if request id
    srw.message(999, 'Failure to submit Concurrent Request to Print Dunning Letters');
    ELSE
    srw.message(999, 'request id ' || to_char(vrequest_id) || ' submitted');
    end if;
    -- Original Afterreport trigger stuff
    SRW.DO_SQL('alter session set sql_trace false');
    return (TRUE);
    end;

  • Printing report to direct print 9i

    Hi,
    I am able to direct print the reports on web using normal parameters...i.e. desname, destype and desformat.
    When it prints successfully, it gives us a message in a separate browser window "The report has been successfully printed out"
    And we don't want this message. Can anybody tell me to suppress this window and message ?
    Command:
    WEB.SHOW_DOCUMENT('/reports/rwservlet?
    report=REPORT.rdf&userid=scott/tiger@ora&
    P_DEPTNO='||:EMP.DEPTNO||'&
    desformat=htmlcss&destype=printer', '_blank');
    Thanks,
    Martonio.

    Martonio,
    if you use RUN_REPORT_OBJECT() built-in in Forms to print Reports then you don't have this problem.
    If you request the Report directly from a Web browser, not using Forms at all, please ask the same question on teh reports forum here on OTN.
    Frank

  • R12: PO Print report not accepting custom layout

    Hi All,
    PO Print report is not picking up the custom layout in R12.
    We have developed a custom layour ( .rtf).It works fine when run as a concurrent program.
    But if we follow the standard navigations ( Inquire/View document ) generates the standard report only.
    If any body has worked on similar type of issue anytime please let me know.
    Thanks in advance.
    Regards,
    Baldeep
    9880054721
    [email protected]

    We are using r12-12.1.1.
    Still this bug is not rectified(6806428). Oracle has taken up new Enhancement request 9264442.
    Funny that it will rectified in next version .
    This db flaw in india localization which doest allow to pick sum of each taxes.
    Edited by: |SN| on Jan 21, 2010 10:46 PM

  • Error 7 occurred at Get LV Class Default Value.vi only in my executable for Print Report - LV 2010 SP1

    I have a program written which uses the print report function. Everything works fine in the uncompiled code, my report prints just fine. I can compile my project all the way to a full installer. When I run the executable I get the error:
    Error 7 occurred at Get LV Class Default Value.vi
    With the following text:
    Possible reason(s):
    LabVIEW:  File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS X, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
    =========================
    NI-488:  Non-existent board.
    Complete call chain:
         Get LV Class Default Value.vi
         NI_report.lvclass:New Report.vi
         print report.vi
         EMS V3.0 streamline.vi
    LabVIEW attempted to load the class at this path:
    H:\InMotion\EMS\builds\EMS_01\Emissions Analyzer\EMS.exe\1abvi3w\vi.lib\Utility\NIReport.llb\Standard Report\NI_Standard Report.lvclass
    "EMS V3.0 streamline.vi" is my main vi, "print report.vi" is the subvi that creates and prints the report based on all the information sent to it. I get no warning when I compile this to an executable. I already tried repairing both LV SP1 and the report generator toolkit. No change after I compile to an exe.
    Any help would be appreciated. Thanks.
    Garrett Herning

    Ok, I tried that... and now I get an error when I try to compile to an executable... This is right at the end of the build and will not let me build an executable.
    Error:
    An error has occurred. Expand the Details section for more information.
    Details:
    Visit the Request Support page at ni.com/ask to learn more about resolving this problem. Use the following information as a reference:
    Error 7 occurred at Invoke Node in AB_Build.lvclass:Copy_Files.vi->AB_Application.lvclass:Copy_Files.vi->AB_EXE.lvclass:Copy_Files.vi->AB_Build.lvclass:Build.vi->AB_Application.lvclass:Build.vi->AB_EXE.lvclass:Build.vi->AB_Engine_Build.vi->AB_Build_Invoke.vi->AB_Build_Invoke.vi.ProxyCaller
    Possible reason(s):
    LabVIEW:  File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS X, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
    =========================
    NI-488:  Non-existent board.
    Method Name: Linker:Write Info To File

  • Template is not attached to AP Check Printing report (XML Publisher)

    Hi Guru,
    I have implemented XML publisher version of AP check Print report and did all the setups. When we make the payment in payables it automatically submits check print report. The report is completed successfully, but no output.
    When I check View details button noticed that template layout is not attached to the report.
    Please do the needful.
    Thank in Advance,
    Venkat.

    Hi,
    The following are the Instance details
    OS : OEL5
    Database: 11g
    EBS : 11.5.10.2
    I have completed all the setups for the report and I am able to see the template attached to the request for other reports where we submit them in SRS window.
    But "AP check Print report" submits automatically through the form while making the payment against supplier in AP.
    Thanks in Advance,
    Venkat.

  • Printing Report - Urgent please

    Hi All,
    Can anyone please help me with the following printing problem.
    I created a report using class cl_gui_list_tree. The report looks like our windows directory stucture. Like directory/sub-directory/file. This is NOT sapscript.
    The above class does not have any print methods. I used the following code to print it. It shows the print parameter screen where we can select the printer/format etc. Once press the green check mark, it will not do anything.
    The code:
    case ok_code.
      when 'PRIN'.
      data: l_status type c.
      call function 'PRINT_REPORT'
        exporting
         NO_DIALOG                    = ' '
          report                       = sy-repid
       IMPORTING
         STATUS                       = l_status
       EXCEPTIONS
         ARCHIVE_INFO_NOT_FOUND       = 1
         OTHERS                       = 2
      if sy-subrc <> 0.
      endif.
    First question is: Can I use the above function module for printing?
    If this is not the right one please let me know the right function module.
    If we can use above function module whatelse I have to do to get it printed?
    Thanks in advance.

    I am not sure for the function module but here is a suggestion - write data to spool, get the spool request no.
    And then use fm RSPO_OUTPUT_SPOOL_REQUEST to print spool request.
    You can try this approach. Let me know if you need any help to create Spool request.

  • Print Report Direct from current PC

    Hi
    I want to print pre printed reports direct to dot matrix Printer without Concurrent Manager in requested PC ( Print from PC not from Server ) .
    So , can i do that or not ?
    Thanks,
    Mohamed Badr

    In general you have 2 options for printing.
    1) print via the server printing queue
    2) download/open the report and click the print button on your workstation
    there is a 2 B option. If we are talking about a HTML based report you can modify the reports in such a way that you send a java script with it that starts the printing. However this is (A) not advisable and (B) somewhat experimental and not supported ;-)
    If you want to know more about printing via javascript check this page: http://www.htmlgoodies.com/beyond/javascript/article.php/3471121/Print-a-Web-Page-Using-JavaScript.htm
    Regards,
    Johan Louwers.

  • Print spool requests by background job

    Hi,
    we want to print spool requests by a background job. Do you know any abap program to do this.? I search at the programs RSPO... , but i can't find anyone to do this.
    Can anybody help me.
    Regards Oliver

    Hi,
    i found a report for this issue. You can use the report RSPO0015

  • Cancelled POs not appearing in isupplier PO Print Report

    Hi All,
    I am using oracle apps 11.5.10 version.My problem is that PO print report is not printing all the cancelled Purchase Orders.Its printing only the last Purchase Order which is cancelled.
    Steps to reproduce-
    1. create a multi line req in iproc..submit and on approval PO gets created.
    2.from isupplier run Printed PO report.You will see all the lines.
    3. Cancel 1st line in iproc-let it revision.run report from isupplier.You'll see all the lines along with one line that is cancelled.
    4.Cancel 2nd lines in iproc.let it revision.run report from isupplier.You will see all the lines and the new cancelled line as well.But the Cancelled line1 will not be seen.
    5.Again cancel 3rd line.When you print PO in isupplier.You will see all lines+3rd cancelled line.But the above two cancelled Lines 1 and 2 will b missing.
    Note- we have modifed the xslfo and po_lines_xml for some other changes.I have reverted the changes made in po_lines_xml but still facing the same issue.
    Please help.

    Hi,
    Please check in transaction  SXMB_MONI can found related information why it not transfer to SRM.
    Also check the purchasing data of the PO.
    Thanks,
    prasad.s

  • Report Generation Toolkit V9.0.0 : Print Report.vi doesnt print

    Hi,
    i have migrated my Labview 8.5 Project with Report Generation Toolkit V1.1.2 to a Labview 2009 System with Report Generation Toolkit V9.0.0.
    In this Project I use the Report Generation Toolkit for printing out a Standard Report with e few Tables and Graphs.
    Now the VI Print Report.vi delivers the Error -41002 with the Text "Invalide Printer Name". I have, of course installed the propper Printer on the machine.
    I don´t connect a string to the "Printer name" input of the VI, because i want to use the default printer.
    In my oppinion, there´s  a bug in the Print Report.vi: if you don´t wire the "Printer name" input, the vi should use the default printer, but in this case the vi connects the empty input string to the input of the method node it calls.
    I fixed this bug, but the method node still returns the same error.
    any ideas?
    Thanks!
    Solved!
    Go to Solution.

    Thank you for the link!
    For some reasons i can´t find this specific article in the knowledge base (my browser is always rerouted to the german version of ni.com, because i am in Austria). I tried to search with the exact title of this article, and the error message string, but no results...
    I have also installed Labview 8.5 and the "old" Toolkits on my new computer in addition to Labview 2009 and the "new" Toolkits and tested my program in 8.5. Here i got an error mentioning the margins and i had to change the margin settings for printing out, then in worked.
    After reading the article, i have applied the same changes for the margins in the 2009-version of my program and it works too!
    Problem solved!
    Thank you very much!
    PS:
    I first wrote, that there´s maybe a bug in the new version of the Print Report.vi, but i´ve compared it with the old version and it seems to be no bug, sorry!
    After all I decided to stay with Labview 8.5 for now, because of another problem:
    it´s not possible to "save for previous version" from LV2009 to LV8.5 directly.
    Laview crashes, when a VI contains an event structure as i found out by searching through the "known issues", and i have a lot of VIs with event structures!
    I have to have the possibility to save my Labview projects for 8.0 and 8.5. The only way is to save for 8.6 and then save from 8.6 to 8.5.
    That´s nasty and time-consuming!
    Maybe a future update will solve this problem (without producing new ones)

  • VS2005 Crystal Report Print Report Button is not working on Windows 7 x64

    Hi There,
    My application is written in VS2005 C# on x86 machine. It runs smoothly on XP pro and Vista x86 machine.
    I deployed the same to windows 7 x64 machine with CRRedist2005_x64.msi and found that the Print Report button is not working.
    So, I re-compiled my application to x64 target platform, and reinstall the application to the same machine. But nothing changed. I have surf for answer over the web but nothing found.
    Please help urgently. Any helps is much appreciated. Thks in advance.
    Edited by: chanpyvivian on Mar 26, 2010 11:14 AM

    I follow your instruction as below:
    1) download the sample app vbnet_win_printtoprinter.zip to dev computer and compile it to .NET 2005.
    - Run from my dev computer
    - Click "Print Report" button
    - Error message display - please see below
        The error was due to the default printer name hard coded in the program was not found. I have edited to my printer name and it can be printed out with no error.
    2) Use a "saved data" report so that you do not have to worry about database logon.
    can't find the "saved data", please elaborate
    3) Then copy the exe to the 64 bit box and try to print using this sample app.
    -do you mean copy the exe to the 64 bit computer for testing ?
    ERROR Message
    CrystalDecisions.CrystalReports.Engine.InvalidArgumentException:
    Invalid printer specified. ---> System.Runtime.InteropServices.COMException (0x80000201):
    Invalid printer specified.
       at CrystalDecisions.ReportAppServer.Controllers.PrintOutputControllerClass.ModifyPrinterName(String newVal)
       at CrystalDecisions.CrystalReports.Engine.PrintOptions.set_PrinterName(String value)
       at CrystalDecisions.CrystalReports.Engine.PrintOptions.Copy(PrintOptions src)
       at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
       --- End of inner exception stack trace ---
       at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e)
       at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
       at CrystalDecisions.CrystalReports.Engine.ReportClass.Load(String reportName, OpenReportMethod openMethod, Int16 parentJob)
       at CrystalDecisions.CrystalReports.Engine.ReportDocument.EnsureLoadReport()
       at CrystalDecisions.CrystalReports.Engine.ReportDocument.get_FormatEngine()
       at CrystalDecisions.CrystalReports.Engine.ReportDocument.PrintToPrinter(Int32 nCopies, Boolean collated, Int32 startPageN, Int32 endPageN)
       at PrintToPrinter.Form1.Button1_Click(Object sender, EventArgs e) in C:\Crystal\CRNET\vbnet_win_printtoprinter\vbnet_win_printtoprinter\Form1.vb:line 91
    OK  
    Edited by: chanpyvivian on Mar 30, 2010 6:18 PM

  • How to track the flow of Sharepoint SSRS report requests to troubleshoot slowness

    How to track the flow of requests of Integrated SSRS report links in Sharepoint.
    We are using SSRS with Sharepoint for reporting purpose. The issue is some of the reports get generated fast and some other reports generation is very slow. When the sql query of these reports RDL file is executed, the records are shown fast.
    Also even on clicking the "Add Subscription" link of "Manage Subscriptions" of a report is very slow for some reports, while it is fast for other reports.
    I tried enabling SQL profiler to track the requests.  I have checked profiler log for the SQL statements with exec sp_executesql. But they are not helpful.
    Pls advice on how to track the request of flow of SSRS report request in sharepoint and how to troubleshoot the slowness in  "Add Subscription" link, response of some reports.

    Hi Pradeesh,
    According to your description, my understanding is that you want to track SharePoint SSRS report requests to troubleshoot the performance.
    Developer dashboard is very help full while troubleshooting the issues related to performance in SharePoint 2013.  You can have a try.
    About Developer dashboard, you can refer to the links:
    http://www.sharepoint-journey.com/developer-dashboard-in-sharepoint-2013.html
    http://msdn.microsoft.com/en-us/library/office/ff512745(v=office.14).aspx
    Best Regards,
    Wendy
    Wendy Li
    TechNet Community Support

  • Purchase Order Print Report Compilation Error

    Hi,
    While compiling the report in Reports Builder Purchase Order Print Report , we get the following error:
    identifier GET_PRECISION must be declared.
    Where as this is a seeded function inbuild in the Program Units.
    Also while compiling on server we get the error.
    Cannot convert rdf to rep.
    Thanks,
    Angelica.

    Couldn't find how to copy the PO layout over using copy express.
    I did compare the RDOC fields for POR20002 in both databases and they are Identical. 
    In Crystal Reports, I did a formula search for N_Decimal_Places and it found nothing.  Then I did a search for 'length' in all formulas and it finds length in N_Decimal_Places.  When I double click on N_Decimal_Places it clears the screen and never shows the formula. This happens in both layouts for my test database and SBODemoUS.
    Again, SBODemoUS works correctly and AAA_TEST give the error.

Maybe you are looking for