PO printout in AR language shows Mirror image

Hi,
We have configured in output type for Arabic language PO, when we select language AR the PO Printout comes in Mirrror image, but when we select EN language its working fine, is any config from MM side or this issue will be Abap side please clear this
please guide me.
Thanks
Shital D

Hi Shital,
Ther eis no reason from config side to happen this.
You must go for ABAP help. It seems there is something wrong with the Output form.
Thanks,
Charu

Similar Messages

Re: Slide Show Mirror Image

I have recently upgraded to iWeb 08. I was hoping to be able to control the use or nonuse of the Mirror Image in the slideshow mode. There is not a way to disallow
this mirror imaging. Any way this can be done simply??

Look at Inspector -> Photos -> Slideshow tab -> Appearance -> Show reflection.

Screen image is fragmented shows mirror image

The screen on my boyfriend's 13 inch MacBook Air suddenly started showing a mirror image of about half the screen. After rebooting it, now the screen image is fragmented and the menu bar won't come up. Of course this would happen on a Sunday. Any help would be appreciated!

Good Morning Gutenberg_Girl,
If the display on your MacBook Air is distorted, try the following:
Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
http://support.apple.com/en-us/HT201177
Reset the system
You can reset the Mac's parameter RAM and SMC.Reset the resolution
Start by resetting the Mac's parameter RAM.
Start up in Safe Mode
Start up in Safe Mode.
From the Apple () menu, choose System Preferences.
Choose Displays from the View menu to open the preferences pane.
Select any resolution and refresh rate that your display supports.
Restart your computer.
If you tried all of these steps for your display and the video issues persist, contact Apple technical support or take your Apple computer to the nearest Apple Store or Apple Authorized Service Provider (AASP) for diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).
I hope this information helps ....
- Judy

My iphone 3 GS shows mirror image i.e backward/reversed text when switched on or woken up ? Any explanations or solutions?

Hi, my i-phone 3GS suddenly started showing all text in reverse or mirror image when it wakes or is switched on. By toggling the on/off swtich it may revert to normal eventually but it takes time. Problem is recurrent for 3 days and makes the phone unusable in a hurry. Any explanations or solutions.

Add me to the list of disgruntled users who have had this same problem since upgrading to 3.1. After restarting the phone, it works for about 30-40 minutes and after that, no calls, no texts, no voicemails, no 3G web browsing or email (wi-fi still works).
The tech at the Genius Bar (at the 3rd St. Santa Monica, CA store) seemed as though he had no idea what the problem was. Since my phone is out of warranty, he told me that if the phone needed to be replaced, it would be at my expense, which p*ssed me off, since it was obvious (to me) that the OS update was at fault.
I did a half-dozen restores before I realized that there was no way to roll back to a previous version of the OS and that outside of that, it didn't really matter what I did.
I just read the tip on this thread about turning off 3G. It works fine so far. We'll see if it continues to work after the dreaded 40-minute mark.
Thanks, everyone, for the help. Hopefully, Apple will put out a fix quickly, before they have a revolt on their hands.

Acrobat Pro Extended 9.1.3 shows mirror image for second pdf

When I open a second PDF using Acrobat Pro Extended 9.1.3 the second file is shown as an enlarged text "mirror image." Has anyone else experienced this behavior?

One of our users is having a similar problem. He always leaves Elements open in the background so I'm wondering if this is causing problems when he downloads and opens pdfs using Acrobat Standard 9. He also seeing the images stretch to the point of seeing a bunch of horizontal lines. Has anyone offered any solutions?

Airplay mirror imaging icon will not show up on my macbook pro even though i downloaded mountain lion. How do i get airplay icon to appear on my macbook pro?

i have a macbook pro (almost positive that its a 2010 version) and i got mountain lion. The BIGGEST AND MAIN REASON i bought mountain lion was so that i can do airplay, allowing me to mirror image what is on my mac to my Apple TV. my whole computer is updated as far as the displays and newer features but the small airplay icon will not show up on the top of my screen. therefore, not allowing me to mirror image what is on my mac to my tv... it is connected to the same wifi as my apple tv. idk what to do. could it be because my macbook pro is a 2010? desprately looking for help...please help me with this issue
thank you

Welcome to Apple Support Communities
Read > http://support.apple.com/kb/HT5404 AirPlay Mirroring requires an Early 2011 or newer MacBook Pro, so your MacBook Pro isn't supported.
To mirror your MacBook Pro's display onto the Apple TV, you can use an application like Beamer or AirParrot even if AirPlay Mirroring isn't compatible

How can I use mirror imaging on my macbook pro to show a movie through my dvd player on my apple tv? just downloaded mountain goat and am unimpressed. when i try to mirror image a dexter dvd to my apple tv it gives me a checkered screen. anyone know why?

what do i do to mirror image dvd player to apple tv?

I have the same problem, just a chequered screen for me as well.
I have an early 2011 MacBook Pro & an Apple TV 3 so hardware is ok.
You'd think using an Apple app with the latest kit would'nt throw up any problems.
Any ideas anyone?

Why does iChat video preview show a mirror image of the webcam picture?

When I open video preview in iChat on my iMac OS X 10.4.11, the video image I see from my Logitech QuickCam Pro 5000 webcam is a mirror image of what the camera is pointing at(ie printed material can't be read cause it's backwards as in a mirror.)
Is this a function of iChat or of the webcam? And, can it be corrected so a true video image appears instead of the mirror image?

Hello Oceanbeach9
iChat's picture-in-picture and Snapshot is "mirrored" by design.
We are so accustomed to seeing ourselves in the mirror that it looks strange the other way. Your Chat friends and movie clips are normal. Only the preview is mirror-image.
If you plan to post or email a snapshot image, you can change individual snapshots made with iChat by opening the file with Preview and using the Preview > Tools > Flip Horizontal menu command.
You can add iGlasses 2 software iF you really want to change your iSight's image.
EZ Jim
PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.2) External iSight

Mirror Imaging Text (RTL arabic-style languages)

Hi,
I have an odd requirement, to be able to display text typed into a purchase order or sales order and display it on the smartform as it's mirror image.
The background is our Arabic smartforms need to display English as well as Arabic. Arabic only is not a problem and works, SAP displays all text in it's correct right to left (RTL) format. English only also work, text is displayed left to right (LTR) but to produce a smartform with both is a problem. We have gotten around it so far by turning off the RTL function in Arabic smartforms and hard-coding the titles in Arabic as mirror images of themselves.
But now, the business wants user to manually type some text into purchase or sales order and this text is to appear on the smartform. This text will be in Arabic and needs to be displayed RTL as a mirror image of itself. So, the business has asked me to write a function module which accepts text strings and converts them into mirror images of themselves.
I have to admit I'm stumped - 8 years of ABAP and I've never been asked to do this before.
Any suggestions?
Gill

Check FM STRING_REVERSE
Regards,
Naimesh Patel

Print mirror image on HP Officejet 6500 E709n Series

I have the HP Officejet 6500 E709n Series and am wondering if it is capable of printing a mirror image? I am trying to do an iron transfer to tanktops and need the image flipped.
I called the HP Support number, the printer is out of warranty and of course they said they could help me for $25 - when asked what they would do for that they wouldn't say.
I'm sure it can print a mirror image, this baby can do anything, so I really don't want to pay the money and then have them show me the button I'm supposed to push.
I've checked in printer properties and everywhere and can't seem to figure it out. Please help!

Hi,
Please use the following instruction:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=bpu02032&lc=en&product=61561
Other option: using other tool(s) to flip the image BEFORE print. If images/photos, you can flip before hand:
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Need help with a mirror image effect

For most of our product photos, I create a copy of the image, flip it vertically, fade it out, and then move it down to create a mirror image effect. Simple enough. But this one I'm having a problem. The product has 4 legs, and from this view, the back 2 legs are shorter. When I do my normal steps that I listed, I get similar to what you see below. I know all about drawing a marquee around part of the reflection, hitting Ctrl+T and then holding down Ctrl+Shift to skew just what's in the marquee. I've done this technique a lot, but it does not work for this particular image. What do I have to do to get the reflection of the back legs to line up with the actual back legs in the image? Thanks.

Well, Photoshop is not a 3D rendering program and you can only fake it by painting or assembling the reflection using your artistic skills and knowledge of perspective and reflections. From certain angles and with certain objects this could be quite easily done by just mirroring the 2D image but in other cases like this it wont' work. I made a quick scene in a 3D program to show you how the refection will actually be in real life - you will see the bottom of the table in the reflection and this is missing from the 2D image. You can assemble and position separately parts of the reflection from the 2D image by using the front sides of the table and and legs but the rest (bottom) of table has to be created from scratch.

About to purchase my 1st imac 27in i5, what do I need to do a mirror image?

I am very close to choosing an imac over another pc but was just wondering what I would need (and where to get it), how difficult and how much it would cost around to do a mirror image of my screen onto a 32inch samsung that has a vga port, 2HDMI ports, and a DVI? I would like to do this so I can stream my netflix onto the Samsung and watch other videos as well. Also if I do this, will this produce SOUND from my TV, I'm really hoping it does?
(any encouragement on choosing the imac would be great too since I'm still on the fence about my new computer decision) Thanks!

First of all, The i5 processor is screaming fast and you need only a mini display to HDMI adapter. I just set up an i7 MacBook Pro to stream netflix and you get true 1080p output with sound from all newer machines. You just navigate to the System Preferences Icon in the dock ( looks like clock works or gears),select it and go to Displays. Check the box marked "Show displays in menu bar" so you can always switch on the fly. Also click detect displays. (You only have to do this once, after that it will remember and act appropriately.) Next, Look at the top left corner of the System preference pane and click "select all" to show the main sys. pref. window again. Now click sound and select output ( you will see an option to send audio through the HDMI connection. That's it... Oh, BTW the mirroring option appears automatically in the drop down menu from the new monitor Icon that is now on the top of your screen once a second monitor is attached and on. Don't forget to adjust the monitor itself as many new LCD HD TV's have all of the settings set to nil on the 2nd and 3rd HDMI inputs until you adjust them. I just did a brand new Sony Bravia 42" and a Philips and surprisingly found this condition on both HD TV's until I set up the brightness,contrast,etc. Also of note, I've been told by a very good Apple tech that just dragging the netflix window to the new monitor gives better performance. I can't tell the difference on my setup though... I can tell you it really is a blast to watch movies streaming from my Mac onto the "big" monitor.. Have fun.... ******* Important Update ! ******.... It seems that this particular machine has been having issues with second monitors using Mini display to DVI inputs... (mouse gets jumpy ) I have not had any issues using mini-display to HDMI adapters and inputs, but ask an in store tech before you buy .... Works fine on the MacBookPro's however ....

Lightroom (Vista): Reversed/Mirrored Images in Preview!

New user to Lightroom 1.2 here using a Vista PC.
When I connected the camera (Canon G9 or Canon SD870is) to my PC via the USB, Lightroom was already opened (as recommended by the Kelby Lightroom book). At this point, a pop up dialog box opens up and there is a small check box at the bottom LEFT corner that says "Preview", which I checked because I WOULD like to see/preview the images. Oddly, the pictures showing up (to the right side of this dialog box which expanded after I checked the "Preview" box) are MIRROR images or at least REVERSED!
May I know why that is the case and whether or not there are user changeable settings? It seems to me that it is not desirable to have reversed preview images!
Thank you in advance!

Hi Jay & Rob,
Thx for your comments/advice.
Today, I used my Sandisk Extreme III's included MicroMate USB card reader (very small, more like a wide-looking flash drive with a little slot for the SDHC to go into. It worked. The previewed images are no long mirror images.
Does this basically mean that there is no hope for the Canon G9 to ever change? I was informed in the Canon forum of dpreview by some folks that Canon, as a general rule, does NOT issue new firmware upgrades UNLESS there is a serious issue. That is to say, they don't issue firmware upgrades just for the sake of new functionalities, only if they HAVE to due to some defect. Actually, this IS a "defect", in my view. Not being able to work properly with one of the most popular and respected programs in the photography world IS a problem/defect.
What to do now?
On the other hand, as annoying as this is, I should only see the Preview thumbnails briefly, just to identify which pictures to "check mark".
I wonder why it is considered so "bad" to connect the G9 directly to the PC? I like it more because it decreases the possibility of breaking the little flimsy door of the battery/SDHC card compartment (less opening/closing = less chance of breakage). I don't find the speed to be that horrible. The 10 pictures or so I downloaded using the MicroMate card reader (given free with my Extreme III card) took just about as long as it would have from the G9, but then again, 10 pictures is not much...should it have been 150 pictures, it might have made a more substantial and noticeable difference.
any comments please? thx in advance!

Must iSight picture be a mirror image?

Doing 'Video Preview' on iChat, I held up a book to the screen, and the writing was mirror-fashion. So the camera shows me the same image that I would see in a mirror - presumably it also shows this image to anyone I'm chatting to. Up to now I thought it acted like a normal camera, so that I'd see what you see in a camera viewfinder. Can I 'flip' the picture? Can't find anything in the iChat Help or in these discussions.

You're welcome, Graham,
... the content of the Tech Support article should be incorporated in the Help files ...
You can certainly send that iChat Feedback. That is the best way to get your good suggestions considered by Apple for inclusion in future updates.
Until then, in addition to the Help files on your Mac, many other iChat AV info sources, including these Discussions and the iChat AV Frequently Asked Questions (FAQ), are available.
One of those FAQs is Apple's own iChat, iChat AV frequently asked questions (FAQ). Many common iChat AV questions are discussed there, including the tenth item, which gives the link to the Tech Support Article.
A final tip here, "Advanced Search" is my primary source of help with my Mac questions. For instance, you can also find the link you seek by clicking the "Advanced Search" link in the colored bar at the top of this page and searching for "iChat mirror image" (without the quotation marks). If you are disappointed with your search results, click the Help link to learn how improve your "Advanced Search" results.

RTL text written in 'mirror image' in Dreamweaver CC - semi solution found

I have Adobe CC, which is set on English with Hebrew support. I downloaded InDesign and Photoshop under this setting, and they work perfectly well in Hebrew.
I'm trying to build a site in Hebrew, but whatever I write inside DW *code editing* is shown in a mirror image: It's equivalent to writing "this is a book" and getting "book a is this" (curiously, this doesn't effect on the characters inside the words themselves; 'book' will still show as 'book'). The live preview and the checks on various browsers display the Hebrew properly - this isn't a problem with the code (which already contains '<html lang="he">' and 'body { direction: rtl; }'), but rather how DW CC the program displays the text.
Is there a solution for this that does not involve me learning how to read Hebrew back to front or switch to a different editor?
Bottom line:
- Adobe CC already set on English with Hebrew support (other programs work fine with Hebrew)
- Not code problem - all tags are written properly and text displays properly on all browsers I've checked, as well as the live preview
- Happens between tags and in lines without tags
ETA: I installed the CS6 version of DW (English with Hebrew support), and it works perfectly. But I'd still like to be able to work on DW CC.

Hi,
We tried reproducing the problem at our end. Everything worked fine here.
Can you please share some more information on your machine configuration:
1. Mac or Win > Operating system
2. OS settings > Locale and Keyboard used
3. What all other Adobe products you have installed on your system (CC and CS)
4. Does deleting preferences helped you
We will try to replicate your machine environment here. If that does not succeed, we might ask you to share your screen with us so we can try to isolate the problem.
thanks,
Rakesh Lal

PO printout in AR language shows Mirror image

Similar Messages

Maybe you are looking for