PO PRINTOUT LAYOUT CHANGES

dear all,
i want to change the printout setting for PO.
Actually the issue is i have to incorporate "ECC TIN NO" for the plant.
in po printout due to limited space this is not visible.
regards
amey

Dear Amey,
You contact your abaper for this. Generally, if you r using pre-printed stationery, then in general terms & conditions only it is mentioned.
Regards,
VB

Similar Messages

What happens to iweb-built site when I upgrade from Leopard (10.5.8) to Snow Leopard (10.6.3), and subsequently upgrade to 10.6.8 or even 10.7? Will fonts stay the same? Will layout change? Or anything else change? Thanks

What happens to iweb-build site when I upgrade from Leopard (10.5.8) to Snow Leopard (10.6.3) and subsequently update that to 10.6.8 or even to 10.7? Evidently iweb has been discontinued. I have version 3.0.3 of iweb now but understand that there's been an update for OS 10.6 so same question goes for this update.
Will fonts change? Will layout change? Will widgets still work? Links? Will Google Analytics PlugIn still work?
(Since MobileMe is disappearing, I now save iweb site to local folder on my computer, then upload it to GoDaddy using Cyberduck. I run Google Analytics plug in on folder before its uploaded.)
My computer, MacBook Pro came with iweb, which has been updated to 3.0.3. Since iweb is discontinued, will upgrade of operating system just ignore iweb so that iweb will run the same as before? Or will it wipe it out? Or change how it currently works (questions above).
Thanks

As you now know iWeb and iDVD have been discontinued by Apple. This is evidenced by the fact that new Macs are shipping with iLife 11 installed but without iWeb and iDVD.
On June 30, 2012 MobileMe will be shutdown. HOWEVER, iWeb will still continue to work but without the following:
Features No Longer Available Once MobileMe is Discontinued:
◼ Password protection
◼ Blog and photo comments
◼ Blog search
◼ Hit counter
◼ MobileMe Gallery
All of these features can be replaced with 3rd party options.
Currently if the site is published directly from iWeb to the 3rd party server the RSS feed and slideshow subscription features will work. However, if the site is first published to a folder on the hard drive and then uploaded to the sever with a 3rd party FTP client those two features will be broken.
There's another problem and that's with iWeb's popup slideshows. Once the MMe servers are no longer online the popup slideshow buttons will not display their images.
Click to view full size
However, Roddy McKay and I have figured out a way to modify existing sites with those slideshows and iWeb itself so that those images will display as expected once MobileMe servers are gone. How to is described in this tutorial: iW14 - Modify iWeb So Popup Slideshows Will Work After MobileMe is Discontinued.
NOTE: the iLife 11 boxed version Is no longer available at the online Apple Store. To get a copy you'll have to try Amazon.com or eBay.com.
This may be of interest to you: Life After MobileMe.
OT

Report Layout Changed After Upgrade from 4.6C to ECC6

Dear Gurus,
I do functional test of every process in ECC6 after upgrade from 4.6C. I found all report layout changed without variant (it's happen to all Query/SQ01 reports ). So I've to assign manually the fields for the reports, and create a default variant then.
Why it happen ? Is there configuration or setting missed or this is standard while we do upgrade ?
Thx in advance.
Tri Wicaksono

We do re arrange for all ALV report ...

Layout change for S_ALR_87012143/1099 Listings report

Hi Experts,
is it possible to change layout of report S_ALR_87012143 - RFKQSU20 by some means other then abap code change?
We need to add Vendor master related data (such as PO BOX , City etc to the output ) when report is being extracted as excelsheet. This sheet should later be used to submit to 1099 Express.
Are there any other alternative provided by SAP for S_ALR_87012143 - RFKQSU20 ?
Any help would be appreciated?
Thanks a lot!!!!

Hello,
As far as I know, all the relveant information required by you are
available for report RFIDYYWT.
In main screen of report RFIDYYWT:
-> go to'output control' section-> 'tax per business partner'->
click on 'configuration'-> from menu, click 'settings'-> 'layout'->
'change'-> select the fields from the right box and add it to
the left box-> click 'copy'.
BR,
Raquel

ALV - Reflect layout change into internal table

I have an ALV :
CALL METHOD grid1->set_table_for_first_display
            EXPORTING I_STRUCTURE_NAME = 'Z_ALV_STRUCTURE_01'
                      IS_VARIANT = GS_VARIANT
                      I_SAVE = X_SAVE
            CHANGING IT_OUTTAB = itab
                     IT_FIELDCATALOG = gt_fieldcat_lvc1[].
This internal table itab has for example the fields: matnr, plant, stock, vendor
If for example the user changes the sequence of the columns in the ALV grid display into: stock, plant, vendor, matnr
Is there an easy way to get the layout change reflected in my internal table or is the only possibility to built dynamically a new internal table based on the front end field catalog?
Kind regards
Frank

Hi
Can't u use the std icone to create an excel file?
Anyway in this case you should use the method get_frontend_fieldcatalog in order to get the status of the catalog and so fill the table for the excel in the right way.
I believe the problem should be on how to create the table for the excel, i.e. you need to consider the sequence of the fields in ordert to create the table for the excel.
Max

Create pdf from Word fails at page layout change

I have an 87 page Word 2010 (Mac) document with both portrait and landscape pages. Acrobat 9 (Windows) converts it perfectly to .pdf. Acrobat XI (Mac) cuts file off at page layout change. Is this a bug or have I missed a setting somewhere ? I could convert in chunks and then remerge, but that would be silly, especially as the Windows version copes OK.

Can you print a Word document to the "Adobe PDF" printer?
Is there an Acrobat menu in Word, and does it let you make a PDF?

Complex key combinations get eaten by keyboard layout changer

I am using gnome 3 and have a layout switcher on ctrl-shift. However any key combination which involves ctrl-shift (for instance ctrl-shift-n in chrome) causes a layout change (ctrl-shift) and nothing happens when I press N. I also can not select any text in words since it involves ctrl-shift + arrows while selecting by ctrl-arrows works fine.

I am getting desperate. Is it only me having this problem and no solution?

Layout change causes photos to be discarded

I love having a book making tool built right into Lightroom and Adobe has done a commendable job on the first release of the Book module. So far the interface has generally worked well for me. However...
Try this: Start with an auto-layout with 3 photos per page. Then, change one of the pages from 3 photos to 2 photos per page... Where did one of your photos go? Upon investigation, you'll notice that Lightroom randomly picks one of your photos to discard and does not place it in a new page or anywhere useful. It just gets dropped without a trace! Unless you're very aware of what is going on, you could quickly make a book with many missing photos.
This could be better handled in a number of ways, for example by automatically adding a new page for the dropped photo, or floating the dropped photo in the grey area outside of the page. In fact, the grey area could be very useful as a "working area" for shuffling photos around by drag & drop. Additionally, an animation could be used to show what's happening when the layout changes and a photo gets bumped off.
Also, and perhaps this is a bug - sometimes when changing from a 3-photo layout that only has 2 active photos to a 2-photo layout, the second photo gets bumped off even though there's an available spot for it in the new layout. The layout engine appears to sometimes prioritize the empty photo area over an actual photo - not good! I've also had instances when a photo get dropped when changing from a 3-photo layout to a different 3-photo layout. Very frustrating.
The photo usage count in the filmstrip is sort of helpful to find photos that were discarded but in my opinion, too disconnected from the layout area to make for a seamless working experience. As a side note, it should be possible in the filmstrip to locate where a photo is used in the book and vice versa.
Other than this, the Book module is a great start at book making from Adobe.
Tom

Marcin
Welcome to the Apple Discussions.
Your issue seems to be with the underlying file system, not with iPhoto.
Some background:
Events in the iPhoto Window correspond exactly with the Folders in the Originals Folder in the iPhoto Library package file (Right click on it in the Pictures Folder -> Show Package Contents).
You can move photos between Events, you can rename Events, edit them, create them, as long as you do it via the iPhoto Window. Check out the Info Pane (wee 'i', lower left) the name and date fields are editable. Edit a Event Name using the Info Pane, the Event Folder in iPhoto Library/Originals will also have the new name.
When you move files between Events they are also moved on the HD.
Couldn't convert path /Users/dominika/Pictures/iPhoto Library/Originals/2001/Inne/070_RockyNeckCT14.jpg" to an FSRef to put on the pasteboard.
means that, for some reason, the file system is unable to execute that move. (That's the reference to the FSRef). However, iPhoto thinks the file was moved, hence the !.
I've simply never seen this issue reported here before. Is everything else on your Mac working correctly?
First off:
Check your HD for errors with Disk Utility, see if that reports anything.
Regards
TD

Printout of Change PO Only.

Dear ALL,
There is one requirement of my client.
When a po is changed after the initial printout, the change output prints only the changes, and not the full PO. I know this is the standard way SAP works. Is there any way where we can take the print of po where only changes occurred. I dont want to take whole PO print.
Thanks & Regards
SKK

in IMG > MM > Purchasing > messages > Output Control > Message
Types > Define Message Types for Purchase Order and select "Fine-Tuned
Control" option and add operation 2 records.
Then you have to create conditions for printing of changes as you are used to do for standard PO printing (MN04, MN05)

How to keep layout changes in other pages

I am just starting with iWeb and came across a question. When I choose a theme for a website and make the 'welcome' page, but change some layout things, colours, positioning of textboxes, is it than possible to copy those changes in the other pages like 'about' and so? Or do I have to copy the first page over and over? In the least case I will have a problem with the albums and slide show I guess?

Welcome to the Apple Discussions. iWeb doesn't have the capability of carrying over layout changes from the first page to additional pages. If you plan on using the same theme frequently create a second site, add each page type that you might use, make the layout changes to each one and save. Then if you need a photo page in your working site duplicate the photo page in the "layout" site and drag it up to the working site.
You can send a feature request to the iWeb developers via http://www.apple.com/feedback/iweb.html.
OT

Fields Relevant to Printouts of Changes

Hi:
We need to trigger a PO change message only at the time a new PO line item is created, does any one know how to resolve this? Thanks
Regards,
Daniel Guillen
Skyworks Inc.

In SPRO: Materials Management -> Purchasing -> Messages -> Fields Relevant to Printouts of Changes. There is a field "Routine" for each field, I had the idea SAP added this field to distinguish the possible activity with changed field, for example there is one option "Deletion Indicator".
Very last option reads "Customer Range", but not sure if this option can be maintained with user custom ABAP code.
Regards,
Daniel Guillen
Skyworks Inc.

Published pages layout changes from iWeb page design why ?

In a couple of pages the layout changes from iweb design to published site, text appears out of place and headers mixed with body text ?
I have gone back to iweb but all is Ok within the file and pages visually, just publishing the site makes text changes to what viewers see

Thanks to Dale and Nigel at Bristol store who resolved this matter in a One to One session. Corrupt HMTL coding. All sorted now.

Container layout changed with adapter.

Why does TestStand container layout changes based on the adapter selection?
When using NumericLimitTest type with a none adapter the "Units" is visible.
But when using NumericLimitTest type with CVI adapter "Units" variable is not visible in Result container? Why?
Is it not correct that NumericLimitTest type Result container will always contain:
1. TS
2. Error
3. Status
4. Numeric
5. ReportText
6. Common
7. Units
8. Limits
9. Comp
Although TS container may change position.
CLD,CTD
Solved!
Go to Solution.

When using NumericLimitTest type with a none adapter the "Units" is visible.
But when using NumericLimitTest type with CVI adapter "Units" variable is not visible in Result container?
Does anyone know if there is a way to identify for a specific test if Units will be present in container or not? This is when traversing through a single result container in modelsupport.dll (c_report.c file).
CLD,CTD

If I copy/duplicate a page my css-layout changes

If I copy/duplicate a page my css-layout changes, even though the pages are identical and use the same (external) css-file.
This is what happens:
I have a 2-column fixed css container. The sidebar and mainContent align perfectly on the original page, but on the duplicate page the mainContent suddenly moves to the right (it somehow adds the width of the sidebar to the margin of the mainContent).
Does anyone know what to do about this?
Thanks!

Hang on. I just checked, and it only happens in the design-view inside dreamweaver. When I preview the pages in my browsers (Safari and Opera, still need to check in IE) the problem doesn't occur. So it isn't as big of a problem as I thought it was. Still very annoying though, so if anyone knows how I can fix the problem in the design/split-view, thanks...

Migo Screen Layout Change

Hi Experts,
I want to Hide Amount in LC Field (Screen field- GOITEM-DMBTR, ) in Display of MIGO. How can I do this in spro. Kindly suggest.
Thanks in Advance
Ishu

Dear,
You can use T.code OMJX
And try this links,
[How to change screen layout of MIRO and MIGO transactions ?;
[MIGO layout change;
[MIGO Screen layout for 541 movement;
Regards,
Sandip

PO PRINTOUT LAYOUT CHANGES

Similar Messages

Maybe you are looking for