PO Qty and GR Qty is not coming for 2LIS_06_INV

Hi Expert,
I am trying to load data on 2lis_06_inv datasource but after filling the datasource, PO Qty(BSMNG) and GR Qty(WEMNG, BPWEM) fields does not contain any data but the invoice fields are contain data.
Thanks and Regards
Lalit Kumar

Hi Expert,
I have already checked the data on R/3 side after filling the setup table and these fields are not
hidden that i've already checked but still those fields are not containing any data.
Thanks and Regards
Lalit Kumar

Similar Messages

/ZF5 and TDS Exemption is not coming for custom PF contribution

Hi Friends,
Need help regarding the custom PF deduction, requirement is
IF GROSS - HRA < 6500 then *12%
IF GROSS - HRA > 6500 then Only BASIC * 12%
for this i written pcr and places in the schema also and in payslip PF amount's are coming correctly.
Now my problem is PF Tax exemption i.e., Agg. of Chapter VI is not taking and if retro (any arrears) CF PF is not coming.
can any one please tell how to get the Carry forward PF while in retro and PF exemption for TDS.
please tell PCR and in which Schema i has to add.
My Problem is CF PF is not coming and Exemption u/s 10 also not coming
Screen shots for what i have done:
PCR:
SCHEMA:
INN1 - Gross to Net Calculation
INAL - Monthly factoring and storage (cumul.of gross amount)
Thanks and Best Regards,
Praneeth kumar

Hi Friends,
My requirement is for only one PSA - TANA, PF Basis amount has to check the wage types Basic (2100) and Additional Allowances (3800).
logic is if Basic + Addl. Allowance is less than 6500, the 12% on Basic + Addl. Allownace
if Basic + Addl. Allowance is greater than 6500, the 12% on Basic wage type only.
I changed my PCR and while running the payroll, it is calculating the PF 12% and again 12% and storing in the wage types /3f1,/3f3......
problem is, pcr is checking the /111 EPF Basis and according to logic it is multiplying 12% on that amount. but i want the result like check the EPF Basis and do according to logic and store the values.
system behaving :
Basic - 7727
Allow - 1289
total = 9016
calculation: 7727*12% = 928
system is calculating = 928*12% = 111
PCR:
Payslip:
Best Regards,
Praneeth kumar

Delivery status B and TO status C , Deliver qty and Pick qty are equal

Hi
OBD status is wrong and its coming as Partialy picked for a item however the delivered qty and pick qty are equal. also TO is created and confirmed for delivered qty.
I have checked TO is not pending for confrimation please advise.

Hi Rahul,
Please check the OSS note
1475784 - Delivery header status is not consistent with item status
Try to run report RVDELSTA in simulation to check whether system propose any change. if at all you are not getting any positive result from above steps raise an OSS note with SAP

Order qty and confirmed qty mismatch

Dear friends,
My requirement is System should not allow to go further if the sale order qty and confirmed qty(after avaialbility check) mismatch is there.Pls suggest.
Now currently system will check the availability qty and will show the information of confirmed qty in the another screen.and if we say continue the process, we can go ahead and save the document.but the document will be in open state.
So pls suggest the way i can go ahead for this requirement.
Regards
Mahendar.

hi,
If u want to allow user to create SO as much as available qty..? means system sud create SO for order qty is equal to availble qty ...? if yes
then go the availbality check and find out availability check and checking rule..
and again go to OVZ9 remove the check box check with out RLT from rep.lead time tab
Resul is: If u enter in SO a10 qty ,and if you have only 5 qty in hand or in plant ,then system after checking the items it will change the order qty in SO(i e 5) automatically,
Caprin

Difference between pick qty and delivery qty

Hi,
My delivery qty is 5 pcs. However while making transfer order from within delivery, the Transfer order is being made automatcially for 17 pcs and so the pick qty is 17 pcs. Due to the differenc ein delivery qty and pick qty, I cannot do PGI in the delivery.
When I use LT0G, and give the delivery and warehouse no and movement type 999, the system does not allow the transaction and gives a message that, function not yet supported for Handling units. But I do not have handling units in my delivery. Neither the system allows me to cnacel the Transfer order thru LT15.
How to correct the above situation so that the TO does not pick up the qty greater than the delivery qty or what other alternatives are there. Also how to ensure that TO is made of qty which is equal to delivery qty.
Iam not aware of WM module, so kindlyu tell in detial pls.
regards
sachin

In IMG>LE>WM>Master Data> Define storage type.
Check In stock removal control whether "Full stock removal reqmt act" is active.
If this is active it will try to pull the total quant irrespective of your requirement.
Reward if useful.
Regards
EDWIN.

Open Qty and Received Qty for Open Purchase Order.

How to Fetch the open qty and received Qty of every Open purchase orders in EKPO table where ELIKZ = SPACE OR LOEKZ = SPACE. What are the table and field used? Kindly help me.

Hello Senthilramkumar,
Use ME2L/ME2N/ME2M with selection parameter WE101.
Hope this will help.

I need to display a Report which contain -- del QTY and INV QTY in one

Hi ALL,
I need to display a Report which contain
<b>Customer , Material , Order No, Delivery No, Billing No , Order Qty , Dev Qty, Bill Qty , Invoiced Qty and There Values in One Line .</b>
How can I Display, When I am executing the report against the Delivery Number Bill Qty and Invoiced Qty is showing Hash ( # ).
Do I need to right any Routines for this, if I am correct, where I have to write that code and what is the code ,
What are the Consolidation routines ?????
I am working on BI 7.
Regards ,
Shaik
Message was edited by:
shaik

Frst check in backend, which all cubes have got data for each of three..
Corresponding you can go ahead with Multi/Infoset..
Look for reference no in all three cubes and pick one order and track tht by reference no in all cubes,
Hope it helps..
Thanks for points assigned

I just downloaded OS X Mavericks and my texts are not coming through to my Mac at all. How do i change that??

I just downloaded OS X Mavericks and my texts are not coming through to my Mac at all. How do i change that??

Open Messages. Then go to the Menu and click on Messages. In the drop down select Preferences. Choose the accounts tab. If you have already added your iCloud account then remove it and add it again.

I have forgotten my security question and I have tried for to days for uses to send me the resets and the email is not coming though?

I have forgotten my security question and I have tried for to days for uses to send me the resets and the email is not coming though?

If you've been unsuccessful resetting your security questions by signing into your account at appleid.apple.com (manage my apple I'd) and the going to password and security, and have also tried contacting iTunes support and have not heard back then:
Call 1-800-APL-CARE and have the following info ready:
Your verifiable and active apple I'd username, the serial number of a device registered in your name, and some billing info currently associated with your account.

Address and Personal Data is not coming up on Portal ( ESS MSS )

Folks,
I am not able to see the Address and Personal Data is not coming up on Portal ( ESS MSS ) . when I click those links just the roadmap with exit button.
Thanks

Hi Manish,
Check with your system patch level both from ABAP and JAVA in the same Service Pack levels. if they are different then only we will get this type of errors. Even we i have faced the same problem, but solved with the basis help.
Have you gone through PA30, there Empl data has to be maintained. Then we can get the Data.
Regards,
kishore
Edited by: kishore kumar on Dec 2, 2008 3:56 PM

I downloaded a movie from itunes and it finished but not coming up in movie folder what do i do??

I downloaded a movie from itunes and it finished but not coming up in movie folder what do i do??

it should be under (using Finder):
[user folder] > Music > iTunes > iTunes Music > Movies

I have installed my brother computer and is in my printers and devices but is not coming up as a printer option in adobe pdf Help I was able to print PDFS before installing adobe now I cant

I have installed my brother computer and is in my printers and devices but is not coming up as a printer option in adobe pdf Help I was able to print PDFS before installing adobe now I cant

Be sure Safari does not have the Block Pop-Up Windows preference set.
Where I work now there are several unencrypted VLANs that require authentication, and Safari promptly pops up a window for me to register every time.

Where to get Received/Required Qty and Available Qty of MD16

Hi Experts!
Need your help!
I need to know where or how to get the values at the Received/Required Qty and Available Qty column found at MD16 order report.
Thanks!

hey use MD04 for this purpose enter material and plant
and press enter
and u will get all details
hope it will be useful
cheers
s.janagar

My ipad 2 just went off. It was working perfectly while charging. I have pressed the power button for ten seconds and it's still not coming on. What do I do?

My ipad 2 just went off. It was working perfectly while charging. I have pressed the power button for ten seconds and it's still not coming on. What do I do?

First, confirm that the iPad is charged and then try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad. Again, say "yes."
Finally, if the Restore doesn't work, let the battery drain completely. Then recharge for at least an hour and Restore again.

I have an Iphone 4 and my internet has not worked for a good 10 months, why wont it work? my dad pays for my data plan, so its not that i dont pay my bill. I've even tried to reset my net work settings, and that did not work

i have an iphone 4 and my internet has not worked for a good 10 months, why wont it work? My dad pays for my data plan, so its not that i dont pay the bill. I've even tried to rest my net work settings, and that did not work. I went to AT&T and they said that the only way to fix it was to buy a new phone, and im not going to buy a new phone with out my upgrade. someone, please help!

Hey lilmissindian!
I have an article for you here that will help you troubleshoot this issue:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

PO Qty and GR Qty is not coming for 2LIS_06_INV

Similar Messages

Maybe you are looking for