PO Qty in SKU configuration for specific Material Group in PO
Dear All,
I face issue when I do MIGO, which is that unit measure KG can not covert to stockunitstock unit measure PC.
After I checking, I found the following information in tab Qualities/Weights of PO:
PO Quantity 2 PC Order Unit <-> Ord. Price Unit PC <-> KG
PO Qty in SKU 0.000 Order Unit <-> SKU 0 PC <-> 0
What I can configure is "Order Unit <-> Ord. Price Unit PC <-> KG", but I can not conifgure "Order Unit <-> SKU" for PO to buy material group rather than sepcific material.
Could anybody can tell me how to configure "PO Qty in SKU 0.000 Order Unit <-> SKU 0 PC <-> 0" for PO to buy material group in ME21N?
I am looking forward to your kind suggestion, which is really appreciated!
Cheers!
Does anyone face the same issue before? could you give me any tips if you have such problem? thanks in advance!
Similar Messages
-
Approve suppliers only for specific material groups
Dear Experts,
Current scenario: Our purchasers can buy products from all material groups from every boarded supplier. E.g. they can buy production materials from an office paper supplier.
Target scenario: The moment a purchaser buys a material that's not part of the approved material group of that specific supplier, he get's an error.
What is a practical way to achieve this?
Thanks a lot,
SteffenNormally we maintain Source lists, which restrict the list of vendors from whom certain materials can be purchased.
Sometimes you can also create a Material group level contract, and then in the PO specify the materials from that specific material group.
but ideally you should go for source list, as it is the simplest and standard way to control approved suppliers for materials. I know its not at material group level , but still its the best option.
Last case, you can go for a development , use the BADI ME PO PROCESS CUST i think it is. -
Report showing vendors for particular material groups
I am trying to perform an analysis to determine vendors which have procured items for specific material groups. I have 64 different material groups which represent indirect materials and I want to be able to determine what vendors have been procuring these materials. I have run transaction ME2C to examine purchasing documents, however there is way too much information and the system cannot generate the list.
I was curious if there was some aggregate report that I could use in the Logistics Information System. I know the Purchasing Information System has Standard Analysis for Material Groups, however I have to drill down to each Material Group and change the breakdown by Vendor to get the list and this can be somewhat time consuming considering I will have to do this 64 times.
Any suggestions would be appreciated.
Thanks,
Donuse transaction MC$<
execute the selection
in the report choose from menu settings > characteristics display
and select either Key or Key and description
then choose from menu Material group analysis > Export > transfer to XXL -
Duty calculation for import PO for a specific material group
Hi All,
As per company requirement, we need to do changes in duty calculation for import PO for a specific material group.
Current scenario : Currently duty calculating on MRP with abatement 35% ( We have ABTT condition @ 35% of MRP).
For example:
Material: ABC , Basic Price = 1000, MRP = 2000 and duty is 10%
Duty Amt = 2000(MRP) - 700(35% ABTT) *10%(Duty) = 130
Cess 2 % = 2.6
Ecess 1 % = 1.3
Total duty = 133.9
This duty (133.9) paid to custom vendor and loads in material cost.
New Requirement: For vendor payment purpose duty should be calculate as above but for material cost should be calculated on Basic price.
For Example:
Material: ABC , Basic Price = 1000, MRP = 2000 and duty is 10%
Duty Amt = 1000(BP) *10%(Duty) = 100
Cess 2 % = 2
Ecess 1 % = 1
Total duty = 103 ( It should load in Material cost)
New Condition Diff Duty Amt = (1300-1000)*10% = 30
Cess 2 % = .6
Ecess 1 % = .3
Diff Duty Amt = 30.9 ( It should not be added in material Cost)
Paid to custom vendor = 103 + 30.9 = 133.9
Kindly suggest how to achieve this.
Regards
JitendraHi,
Please check whether the requirement is logical or not. Did you check the requirement with your accounts team?
If you have different duty calculation for MIGO and MIRO, how the GL accounts will get balanced? As of my understanding, the requirement is clearly not logical.
Regards,
AKPT -
i want to run mrp for specific material (not for all the plant materials) in background in scheduled intervals............what can i do?
Dear,
You need to go for enhancement M61X0001 with function al modules EXIT_SAPLM61C_001 and EXIT_SAPMM61X_001
Please refer my reply from this link,
[MRP run for Specific Material|Re: Excluding materials from mrp run]
Regards,
R.Brahmankar -
Quality Deactivation for Specific Material
Dear Gurus
Is there any procedure to deactivate quality for specific material other than Material Master (MM02)
Thanks & Regards
ShoibDear
Go to QA08 and Select the deactivate the Inspection For particular Material and Before that Select Which Inspection Type u want to deactivate
with regards
pushpalas -
Modification in me23n :for specific purch. group ,user can enter specific
Hi ,
I have to make modification in me23n that for specific purchase group ,user can enter specific matrial no .But I have never did anything before in standerd sap.So how I have to proceed in order to achieve this.
Regards,
Seema.Hi,
This can be achieved using enhancements in SAP, which could be customer-Exits or BAdi implementations. I think this can be achieved using enhancement(Customer-Exit) MM06E005(Tcode-SMOD) function module EXIT_SAPMM06E_012.Here you have import parameter I_EKKO which will have purchase org and tables TEKPO which will ahve all lines so youc an add a custom check to validate materail based on purchase org.
Regards,
Himanshu -
How to make Delivery block at Sales Order Header level for specific materia
Hi,
My client want to create a delivery block EDI order at the Order Header level for specific materials
How can we achieve this.Dear Varada rajan
Go to material master, select "Sales: sales org.1" view and assign "01" against the field "DChain-spec. status" and save. By assigning, for a particular sales area, you can block that material.
Now go to OVSU select 01 and assign "B" against the field "Block delivery".
Now create a sale order and post the outcome.
thanks
G. Lakshmipathi -
CO46 for sales order no exploded view for specific material
Dear All,
When using CO46 for a sales order it does everything correct exept for a specific material. It is displayed above the sales order in the hierarchy, like if it is not contained in it and there is no exploded view possible.
When I look closer to the MRP for the material it has planned orders but the orders reducing quantity don't link to the sales order. The MRP element data is empty.
Anybody has a clue?
Thanks in advance,
MichaëThe material in the SOI created collective requirements. Change Material Master availability check to 02 and recreate SOI
-
Need actual production order operation details for specific material list.
Hi all.
I am looking to generate a report containing all of the FSTD and MSTD activity for a material list that I will prescribe, as well as within a specific date range that I will provide. Is there a T-Code to generate this report? Thank you in advance. -SteveHi,
Explore the standard report COOIS..
Thanks
Kumar -
Designing the consolidated and line item report for specific material
Hi
i have a R/3-report and it run only for 7-materials.That means we need to only those 7-materials in the selection screen of report.
Then we will get each material corresponding line item details(material no, profit center, variable cost, quanity, price, financial loss(this is calculated based on quantity) , Utility Consumption(calculated based on price, variablecost) ) in one report.
Another report will give same for consolidated values of financial loss, utiliy consumption.
<b>so how can i design the consolidated and lineitem details report for each material.</b> pls let me know
kumar0VENDOR_ATTR - Vendor Master Data Attributes
0FI_AP_51 - Check Register Line Items
0FI_AP_4 - Accounts Payable Line Items
It should be noted, however, that this won't get you everything that you need, so you may have to create enhance one or more of these DataSources and create User Exit ABAP code to get the required data. Also, the 0FI_AP_51 DataSource isn't available if your source system isn't ECC6 EHP3 or higher. If your source system is less than that, you're going to have to create a generic DataSource for the data from the PAYR table. -
FREE check box in PO should be selected by default for specific material
Hi All,
We have a check box FREE in PO creation - ME21N in the item row which is selected when ever we want the vendor to supply those items as free.
- I have a list ot items which are supplied freely by the vendor which I have to mention in the PO. My requirment is when ever the specific material is in the PO the FREE check box should be selected by default. Is it possible?
Please advice.
Thanks ,
Vengal Rao.Hi Vengal Rao,
I don't think there's such flag in the material master. As far as I know any material can be supplied either free or chargeable - the buyer has to choose the applicable option it in each specific PO.
If however in your business case certain materials shall always be supplied as free, then you can use the BAdI that I mentioned above to analyse which material is being procured and set the FREE flag in the PO accordingly.
BR
Raf -
File and folder permissions for specific AD groups
Having a special folder over multiple servers that certain user groups can access with specific permissions I'd like to audit the security mappings using get-acl commandlet. It's easy for a single folder but I would need subfolders and files too. I know
I can assign a variable say $object = dir c:\MyShare -recurse and then would need to somehow pipe each object to get-acl and filter for the AD groups I'm interested in. Ideally if the results were then passed on to csv. Can someone help with getting
this to work?
yaroHi Yaro,
I checked your script, and found you haven't defined the variable $folder before use, please refer to the script below:
$folders = dir D:\TEST1 -recurse | where {$_.psiscontainer -eq $true}
foreach($folder IN $folders){
$folder|Get-Acl | Select-Object -ExpandProperty Access | where {$_.identityreference -match "sys|Adm"}
Get-Acl $folder.fullname | Select-Object -ExpandProperty Access | where {$_.identityreference -match "sys|Adm"} |
Select-Object @{n="object";e={ $folder.fullname }},
@{n="security_principal";e={ $_.identityreference }},
@{n="type";e={ $_.accesscontroltype }},
@{n="rights";e={ $_.filesystemrights }}
And to list the nested groups on local computer, please check this function writed by Boe Prox, which will also list the property "isGroup":
Get-LocalGroupMembership
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Report On Receipt Of materials for a material Group
Dear All,
I have a requirement. I want the value of goods receipt for a particular material group for a particular period. MB51 does not provide input for material group.
I have seen other standard reports related to purchase , but all of them considers Purchase Order date as the date of selection. So these reports exclude Goods Receipt of materials which falls on a selection date but whose PO is out of that selection date. Problem with MB5B is that includes cancelled documents as receipt as well and adjusts it with same quantity in Issue column.
Is there any standard report which will give me a perfect report or is it possible with query. Please let me know the table names ..
Regards
Abhijithiii
In ME80FN , u 'll ge the material group wise value .
Thanks
SAP-MM -
Value Contract for a material group
It is possible to create a contract on value basis for a particular material group without material masters.
Thanks
SanjeevHi,
You can create contract value basis for a particular material group without material masters like for example creating contract for service where you can use item category D but you should use always account assignment category U ( contract without stock material ) & later in creating contract release order or call-off WRT contract, you can change account assignment category U to account assignment category K or as required.
Regards,
Biju K
Maybe you are looking for
-
i need help, i can't download free applications in App store. they answer me "your request cannot be processed Error code:1009". and after they said "we could not complete your request. There was an error in the App Store. Please try again later (nul
-
Process after planning activity rates in CO
Hi: My question may sound very basic to you but please bear with me as i am new to this process. I have defined planned activity rates for two cost centers in CO.. Now i want to do the PP process using these cost centers. These cost centers
-
SWFs don't export correctly when using nested symbols. Help!
Flash is suddenly doing something weird, and I can't figure out why. I'm trying to export some animation that has a nested animation inside it. Basically a guy (symbol) that is tweened to go from small to big. Inside the symbol, he moves his arms and
-
I can't set multiplier to 10, did anybody tried that? When I set it to 10 the damn thing won't boot and only clear cmos helps(no worky with "Insert"). Since I have a Barton mobile I would like to try 230x10 instead of 200x11,5... Oh, and the bios is
-
Create subfolders in a subfolder
when i list view, i i want to create a subfolder in a sub-sub folder, they always gets created in the parent folder How to create a subfolder in the correct folder? Best...Jan