PO qty reduced who brings the cart into cockpit

Hi all
scenario
sc created with 2 qty
PO created by Buyer 2 qty via cockpit .
Again Buyer received a call from requestor that requestor needs only 1 qty rather than 2.
then again BUYER changed the qty to 1 from 2 via me23n. Now again shopping cart venture into cockpit due to mismatch between sc qty and PO qty .
no good receipt done so far since so far buyer did not send the PO to vendor.
how sc comes to cockpit after some time? who is really doing this wotk get status - variant which data plays important role here. or clean job brings... confusion.
can you clarify this trivial things to me..
sc folow on docuemnts updates with PO qty as 1 . but still sc did not come to cockpit.
i am sure it will come shortly i.e sc comes to cockpit. i wanted to who does this job?
if possible answer this.
item guid and header guid sc where it stored in ECC table. i am pretty sure , they were stored in some tables.
br
Muthu

PR -2 qty --> soco -> sc 2 qty --> PO 2 Qty -->changed to PO 1 QTY
status run and clean run well.
still i am looking for this sc 1 qty in the cockpit. Waitinting and waiting...
Muthu
works
sc 2 qty -PO 2 Qty -
po 1 qty -
sc comes to cockpit.
SG:- Stop the get status job . reduce the PO qty 1 from 2 qty thought the sc comes to cockpit. inscrutable.
thanks
Finally, I tried putting 0 in last.. days and running BBP_GET_STATUS_2 in debug mode. From what I see it is looking at all the SC's in the system and trying to update status for each of them. We normally run this job with 30 days on a hourly basis.
Yes. during that time all locks will happen .did you notice in sm12 . no one can perform any activity.
i am looking for dalily updates happened in ECC and it must be updated in SRM - with which variant.
since i ahve some special request .
kindly advise.
How long it took in production . hope it may take lot of time. i am interested to know when do you run this job ? at night no business hours ..since our volume of carts are more...it runs more than 3000 secs in testing envt it self.
Muhtu

Similar Messages

  • RFC in ECC who brings the documents flow of the SD PO

    Hello,
    I need a RFC in ECC who brings the change documents of the SD PO and Delivery.
    There is the function module CHANGEDOCU_CDPOS_READwho bring us this information but it is not a RFC. There are others function modules but we can not call them from ECC via remote function call.
    Someone know a RFC in ECC who brings the change documents of the SD PO and Delivery?
    Cheers,
    Marta

    PR -2 qty --> soco -> sc 2 qty --> PO 2 Qty -->changed to PO 1 QTY
    status run and clean run well.
    still i am looking for this sc 1 qty in the cockpit. Waitinting and waiting...
    Muthu
    works
    sc 2 qty -PO 2 Qty -
    po 1 qty -
    sc comes to cockpit.
    SG:- Stop the get status job . reduce the PO qty 1 from 2 qty thought the sc comes to cockpit. inscrutable.
    thanks
    Finally, I tried putting 0 in last.. days and running BBP_GET_STATUS_2 in debug mode. From what I see it is looking at all the SC's in the system and trying to update status for each of them. We normally run this job with 30 days on a hourly basis.
    Yes. during that time all locks will happen .did you notice in sm12 . no one can perform any activity.
    i am looking for dalily updates happened in ECC and it must be updated in SRM - with which variant.
    since i ahve some special request .
    kindly advise.
    How long it took in production . hope it may take lot of time. i am interested to know when do you run this job ? at night no business hours ..since our volume of carts are more...it runs more than 3000 secs in testing envt it self.
    Muhtu

  • Which field changes will bring the delta into BW

    Hi,
    On which field changes the delta will bring data into SAP BW. let us say if you bring the data from 2LIS_13_VDITM, any key figure changes in VF02 will bring the data? Only few characterstic changes it will bring the delta data. What and all those characterstics for delta identifies?
    Let us say I have added few fields in this extractor from custom table, If I would like to bring the delta for the field changes which lies in custom table, Can I do it by creating custom Business Transaction Events?
    advance thank you very much.

    Hi SHarsha,
    delta update implemented using the characteristic 0RECORDMODE, it describes records to be updated or added.
    Alex

  • How to bring the equipments into system

    Hi
    I have one probelm  we have list of equipments which are measuring like torch wrech ,multimeter 100 nos not in the sap system
    now we want to bring those in sap system without affecting inventory .
    The materail number for these are created in sap but are deleted .
    How we can bring these equipments in the system we have serial numbers for all these equipment s(marked on these)
    Is we have to create non  valuated materail then how new materials can be procured
    Regards
    pratap

    Dear Pratap,
    What I understood about your requirement is that you have equipment already installed in locations.Without affecting the inventory you need to make them as serial numberised equipment.Also these equipment needs to be purchased and tracked with PO in future. if this is the case I don't feel it as complicated.
    1. You create material numbers forthe equipment (One material number for one type of equipment) and give the serail number profile in the material master.
    2.It can be valuated material with either moving average price or standard price as per your requirement.
    3. then instad of bringing these already installed equipment  to stock , you create equipment master and from view profile you select serial numbers and enter the material number and serial number for each equipment.(If needed you can use an LSMW in recording method for this)
    4. Now you have the material master master with price and serial numbers / equipment for those materials. Since you have created the equipment master directly it did not affect the inventory.
    5. in future when you want to buy a new equipment(new serial number for material) you can create PR , PO and do the GR.While GR it will ask for serial number and you can update it.
    6. Before installing the equipment you can issue this serial number from your inventory.
    7. Once it is issued and before it is being instlled go to IQ02 and activate equipment view and do the installation.
    Note:Hope you are using internal number range for serialised equipment , bacause at the time of GR when you are entering the serial number the system will automatically create an equipment number. This equipment is the one you activating for installation through IQ02. If you need to maintain External number for equiment you have to go for a work around method of creating the equipment master with serial number details first before the GR.
    Best Regards

  • For the ipod nano replacement program, can I just bring the iPod into an Apple store near me and do the exchange there?

    Just wondering if this is a possibility, because I think it'd be easier that way.

    Call the apple tech support line printed in your manual. They may be able to walk you through some troubleshooting. If they can't fix the problem, they can book you an appointment at your apple store. I just went through this yesterday.

  • Executing "bring to center" on a free cursor in a log XY graph brings the cursor to the top rim of the graph (instead of the center)

    Dear support,
    dear LV users,
    selecting "bring to center" for a free cursor in a XY graph does not
    bring the cursor into the center of the graph, but instead the command brings it to the
    mean/average value. This is not an issue for a linear mapping
    of the axis [due to the fact that the center of the axis is equal to
    the middle/average value of the end points on the axis]. But when
    mapping of the axis is logarithmic, the cursor ends up on the top of
    the screen. That is because the average value of the end points
    (min(y_axis)+max(y_axis))/2) is not equal to the center of the axis.
    Is that a wished behavior, please?
    Example: For an y_axis = [1..100], the awaited center position would be at
    10 and not at 50.5. The center position for the logarithmic mapping
    should be calculated as (log(min(y_axis))+log(max(y_axis)))/2, IMHO.
    Kind regards,
    Solved!
    Go to Solution.

    You are right, LabVIEW chooses this form (min(y_axis)+max(y_axis))/2).
    You can go to "idea exchange".
    Link:
    http://forums.ni.com/t5/ideas/v2/ideaexchangepage/blog-id/labviewideas
    here you can see how many people like your idea.
    Perhaps it will be considered in the next version of LabVIEW.

  • Question about bringing Hi8 movies into FCE

    I have many 8mm tapes dating back, 5-15 years. I would like to bring the footage into FCE and then brun them to DVD before I lose too much quality (we have watched them many times over the years).
    I read that I would require a TBC device. I am not familiar with this device, or what it does, or how it works.
    http://store.apple.com/us/product/TJ555LL/A
    Can someone explain to me how I would connect this to my Imac and the process of using it to convert my old tapes?
    Thank you
    -Mike

    If yours is a digital-8 camera, you can capture from the camera. If it's not, then you can't; the footage must be digitized by some device between your camera and your Mac. (If you have a dv camera, you could connect 8mm cam to dv cam, dub to dv, then capture from dv cam directly.) In any event, one hour of dv footage is about 13GB.
    My suggestion is to look somewhere OTHER THAN an Apple store for a better price on the converter. Do an online search.

  • I have DVD's that I made from iMovie. I would like to know a way I can bring them back into a file that I can somehow transfer to my iPad, so I can show movies on it, the iPad.

    I have DVD's that I made from iMovie. I would like to know a way I can bring them back into a file that I can somehow transfer to my iPad, so I can show movies on it, the iPad.

    Pad2, the new iPad Supported Video Formats & Movie Formats
    H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
    MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
    Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
    Here's one way to install. You can use a USB flash drive & the camera connection kit.
    Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
    Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
     Cheers, Tom

  • When I bring a song into iTunes next to the number there is what looks like an exclamation mark ! - WHAT DOES THAT MEAN?

    When I bring a song into iTunes next to the number there is what looks like an exclamation mark ! - WHAT DOES THAT MEAN?
    For example, 1 ! Without You
    I can't load it onto my ipod - I never saw that before.

    I found my answer - thanks

  • In  Zoom Burst Effect Guided Edit, when i use the  Add Focus Area button instead of focusing on what i choose it bring the entire photo into focus.

    In Zoom Burst Effect in Guided Edit, when I use the Add Focus Area button instead of focusing on what I chose it brings the entire photo into focus.

    I'd try resetting the pse 12 preferences by going to Adobe Photoshop Elements Editor (Edit)>Preferences>General
    and click on Reset Preferences on next launch, then restart pse 12.

  • How to bring the labour cost into costestimate

    Hi friends,
    How to bring the labour cost into costing run, please let us know. i have given the configuration settings but i am not able to get the accurate result. so friends please help me on this.
    where were i have to give the config settings and the   links please tell me.

    Dear,
    The cost sheet format is,
    1. Material cost,
    *2. Labour cost -
    SPRO -> Controlling -> Product Cost Controlling -> Product Cost Planning -> Basic Settings for Material Costing -> Overhead -> Costing Sheet: Components -> Define Calculation Bases*
    1. Here just check whether you have assigned the Labour cost Cost elements with Labour group or not.
    2. T Code - OKTZ : Check whether you have assigned the Cost elemnts here or not
    3. Labour cost is based on : Activity types and Cost center figures updation in KP26
    Let us know if you still need any help
    Thanks
    Edited by: nkonnipati on Feb 15, 2012 4:01 PM

  • How do i bring the kuler swatches into Photoshop?

    How do i bring the kuler swatches into Photoshop? I don't see any buttons that say "download" or anything like that.

    Yes, i logged in and hit the download button.  When i open up the 
    file i get a message that reads "melody.ase is an unknown format and 
    cannot be opened."  I changed the extension, but still no luck.
    You can't "open" the .ase file. You must load it into Illustrator, 
    Photoshop, or InDesign (versions CS2 or later). Go to the Swatches 
    panel in the respective application and choose "Load Swatches" from 
    the panel's flyout menu.
    Mordy
    Mordy Golding
    Author, Consultant, Trainer
    Adobe Community Expert
    Blog: http://blog.mordy.com/
    Follow me on Twitter: http://twitter.com/mordy

  • How to bring the more than one rows from the table into the script

    Hi
    I have to bring more than one rows from the table into the Main windows of the script. so plz help me out.
    Thanks in Advance
    Ananya

    Hi Ananya,
       Bring more than one row into main window of script.
       For this you need to do some changes for data which you pass to main window.At a time you need to pass more than one row,so for this you need to define one structure.See below code.
    Types:begin of ty_rows,
         include structure (your row_structure),
         include structure (your row_sturcture),
    Types:end of ty_rows.
    for example....
    If i need to pass 2 vendor details at a time to main window then the structure should be like this.
    Types:begin of ty_rows,
           vendor1 like lfa1-lifnr,
           vendor1_name like lfa1-name1,
           vendor2 like lfa1-lifnr,
           vendor2_name like lfa1-name1,
          end of ty_rows.
    Data:i_main type standard table of ty_rows,
         wa_main type ty_rows.
    Based on condition you can pass more than one rows of your actual internal table data to i_main internal table.
    Then you can pass i_main internal table to your main window.
        I think this will help you.
    Cheers,
    Bujji

  • When calling someone in handsets mode,couldn't hear anything until I turn it into speaker mode. Who has the same fault?

    When calling someone in handsets mode,couldn't hear anything until I turn it into speaker mode. Who has the same fault?

    I searched the iPod Touch forum for "iphone in recovery mode" and it appears there are two possible solutions:
    - Place the iPod in DFU mode and then restore it> 
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - Use this program to get it out of recovery mode:
    RecBoot: Easy Way to Put iPhone into Recovery Mode | Jaxov

  • How to find approvers who approved the shopping cart

    Hi All,
      My requirement is as follows:
      If I give the shopping cart document id, I should be able to find
      1) the list of approvers who approved the document
      2) how much time they have taken to approve the document
      3) any pending approvals for the document.
    Can anyone help me in this?
    Thanks,
    Sivagami R

    Hi..
       Here is technical details which will help if you are in SRM 7.0..
       The below methods are in the class /SAPSRM/CL_WF_EVENT_FACADE
       Pass the SC GUID to method 'GET_WORKFLOW_ID_BY_DOCUMENT'  .. get the header workitem id.
       1 . to get the current approvers list call the method GET_CURRENT_AGENTS..
       2.  to get the previous approvers list call the method GET_PREVIOUS_AGENTS.
      if you are in SRM 5.0 then use the below FM's..
    1 . call the FM BBP_PDH_WFL_WI_FROM_OBJECT_GETu2019 to get the header workitem id..
    2 . call the FM u2018BBP_WFL_DIN_APPR_FINALLIST_GETu2019  to get the list approver's for a SC
    3 . if you need the workitem details then call FM BBP_PDH_WFL_WI_DETAILS_GETu2019..
    Regards,
    Saravanan

Maybe you are looking for