PO Qty should not Amended after GR

Hi friends
i have to do PO Qty should not Amended after GR finished . IS there any BADI Enhancements points please let me know i guess
this is BADI ME_PO_PRICING_CUST i have tried it but it is not working for me or i missing some thing .please give suggestions what i need to do .And the same time there is also required for particular user it should be allow to change
REgards
Rk

Hi when GR is done and it is allowing to change it comes under PO amendment
ask functional if amendment can be stopped
regards
m.a

Similar Messages

GRPO Qty should not exceed +/- 10% of Purchase Order

Hi All ,
Need Store procedure for GRPO QTY should not deviates +/-10% of the Puchase Order Qty.
Ashish Gupte

hI Ashish,
You can use OPOR , POR1 , OPDN AND PDN1 TABLES AND LINK THEM WITH
DOCENTRY , BASEREF , AND LINENUM FIELDS WITH THE CONDITION OF QTY DEVIATION.
Let me know if this works.
Thanks
Malhaar

I want to raise Credit note but Qty should not be reversed

Hi All,
i am raise A/R invoice qty 10 total amount 10,000, i want to raise a A/R Credit note for the same invoice but only deduct amount 1000 where the qty should not be reversed.
Thanks & regards,
Mobin

Mobin,
Instead of copying the invoice to a credit note, you can create a service type credit note in itself so you don't need to choose any items, just the amount.
Regards,
Nat

MIGO should not create after PO Delivery Date

Hi,
We have a PO with multiple line items and diff. Delivery Dates...
We want that during MIGO Process, Posting Date should not exceed to PO Delivery Date.
Means, if PO Delivery Date is 05.07.2014, then MIGO should not created after this date...
Please suggest.

If you want to achieve the scenario with standard settings, then you can use the field "Latest GR date".
Just put the same date as delivery date in this field. Then system will not allow to do GR if the Posting date is exceed with compare this date in MIGO.
You can find the latest GR date in Delivery tab in PO. Also you can maintain the field as mandatory in PO to avoid the field value blank as per your requirement.
Also if you want to change Latest GR date along with delivery date, just take the steps which is explained in this document Mass changes from one field to another field.
**Edited by: Dëv Päträ

PO qty Should not increase PR Qty

Hi
Here the requirement is,
PO qty Should not increase PR Qty
If buyer change / increase the PO qty then the system should give error msg.
It should not allow.
How to do this?
Vijay

Hi,
Make following message as Error in +SPRO > MM > Purchasing > Environment Data > Define Attributes of System Messages > System messages
06 589 Materials/services of purchase requisition & & already ordered in full

Po should not editable after grn

Dear All
My clint wants po should not editable after grn.
pls help

Hi,
you can use user exit : EXIT_SAPMM06E_016
Following Logic can be use:
1. Validate the company code (BUKRS ) & Purchasing document type (BSART = F) from EKKO table for the Purchase order number (EBELN).
2. Check the entries for the Purchase order and the item number in the Purchase order history table ( EKBE) and also Validate if there is no reversal document for goods receipt ..
3. If we find GR doc in EKBE table with out reversal documents then display the warning or error message as POP - UP by using functional module POPUP_TO_CONFIRM.
Step 1: Validate Company code and Purchasing Document type from EKKO table
Step 2: Check the Purchasing document history from EKBE table
Step 3: Check whether any reversal made for goods receipt.
Step 4: Display popup message to user:
Use the function module u201CPOPUP_TO_CONFIRMu201D to display the below message u201CThe PO has been already Receipted. Before changing PO please take care about GR document reversalu201D.
Regards,
Vikas

Delivery qty should not exceede Sales order qty

Dera Friends,
System is allowing to create delivery for a higher quantity than in sales order. For eg. The sales order is created for 10 pieces and delivery is created for 20 pieces.
We want to have a check on this. Pls guide where we can configure this. Our requiremnt is that Delivery qty should not exceede the sales order qty.
points assured
Krishna>C

hi,
Go to VTLA, select your order type and delivery type and select item category and see whether you have maintained the following:-
Order requirements:::::101
Item Data:::::::::::::::::::101
Updata Document flow:::X
Pos./neg.quantity::::::::::+

PO Qty should not be more than PR Qty

Hi All,
I am creating a PO from PR.
I want that the PO qty should never be more than PR qty, and if so it should give an error.
Can anyone tell me the BADI or exit for this? I have already seen exits for PO and PR, but I am not able to figure out which exit to use.
Thanks in advance.
Vinod.

Hello,
You can use the function exit EXIT_SAPMM06E_012 to carry out this validation.
Thanks,
Venu

Delivery block at item level in sales order,Qty should not be confirmed

Dear all
We have a below requirment
We will have multiple line items in sales order and put delivery block at item level.If delivery block is put at item level it should not confirm the qty and pass on to MRP
But if we put at header level delivery block,schedule line qty at item level are not getting confirmed.So requirements are not passed to MRP-This is correct .Working as per SAP standard configuration.
Can you tell how to activate the same for item level delivery block.if same delivery block is put at item level,it is confirming the quantity.But we don't want confirmation of qty to happen.
Can you give us solution
Regards
Sudha

We had similar issue , there will be confirmed quantity but the requirement will not transfer to MRP , We used Item category configuration ( Copied new item category assignment and it should behave as Inquiry item category)
Check OVZ7 T code for customizing the u201CDelivery Blocku201D in your sales document to block Confirmation block
Check the customizing OVZ8: if the flag Transfer of Requirement
Transfer of requirements of the requirement class should be ON.
In the sales order the requirement type is determined by the combination sales order item + MRP type.
Refer SAP Help URL below
[Setting a Delivery Block |http://help.sap.com/saphelp_470/helpdata/en/93/744bf2546011d1a7020000e829fd11/content.htm]

E-Rec Reference Code in the Publication tab should not appear after enddate

hi,
There is a requirement from the client after the end date of the publication ,the reference code should not be displayed to the candidate in the Candidate page ,presently the same is manually done in the system by changing the status to withdrawn.
Is there any way by which we can automate the process by change in customising by which the reference code does not appear after the end date
Please provide a solution if something can be done in the standard setting or do we require any Zworkflow to be developed for the same.
Regards
RK

Hi RK,
this is nothing the standard supports.
But I would not use a workflow here. As this is a mass handling workflow is no good idea. This is a task for a customer periodical service. Just build a class implementing the periodical service interface which gets all released publications which have a publication end in the past and status released and change their status using the cl_hrrcf_posting_inst_bl. This should be done in a couple of hours. Add the customizing and the issue is solved.
A requirement in this context where a customer workflow is quite handy in my opinion is a customer workflow which closes all postings and withdraws released publications when you close the requisition. This reduces the steps a recruiter has to do and ensures that no candidate applies although you are already done with the requisition.
Kind Regards
Roman

Delivery Qty should not cross order Qty

Hi friends,
When I am doing delivery for the qty more than the order qty, it is accepting. My scenario is delivery should not allow the qty more than the ordered qty. Delivery should be done only for the ordered qty. I think it is possible. So can anyone tell me the settings for this?
Rama rao

Dear Arul,
In your sales order, check which is the item category that is getting triggered.
Can find it in in the item level , near to Customer Material Numb field.
or double click on the item.
you can see the item category in the TOP near to your material and sales document item.
Now go to vov7 and select this item category and change the Completion Rule to B as advised.
Check and revert back.
Thanks & Regards,
Hegal K Charles

PR should not change after PO Creation without Unrelease

Hi,
We want that User cann't change the PR after PO Creation.
For Ex.:- We create a PR with 10 Qty., release it and also create PO with 10 Qty.. Now after PO creation with same qty, no one can change PR (Qty, Purchase Group etc...)..
If User Un-release the PO and PR, then user should be able to change in PR...
Please guide...

Thanks a lot dear..
After doing this, i create a new PR and PO with 10 qty... After PO, i unrelease the PR and change the Qty from 10 to 15 nos..then system shows an error message Requisition already converted into purchase order...
But when we change 10 qty to 5 qty, PR allow the same... I want to insert another check here, that user cann't insert less than qty there... There should also be a Message there in system...
Please guide...

PR should not change after PO generation

Dear gurus,
when i create a PR from cj20n/cn22 with qty and rate and do the PO against that PR. Having created PO against the PR system is allowing us change the data in the PR(like Qty, Rate..etc.).but the requirement in my project once the PR is converted into PO system should not allow us to do any changes in the PR. please help us in controlling this.
thanks

This can not be control by user exit. You have to take Abaper's help to disble the screen qty for modify from enhancement provided by SAP in ecc 6.0. If you have lower version then original screen has to be modified taking sap key for modification

Order QTY should not exceed than reference document

Dear Gurus,
I am creating a Release order with reference to Contract. Ex. order qty is 100 in Contract, while doing sale order it should not allow to change the order qty more than 100 [not more than Ref. document qty]. I have tried in VTAA, completion rule.. but it still allows.
Pls thro some light on this.
Regards
Praveen...

Hi Sreebha,
DO NOT COPY PASTE OTHERS STATEMENT
Check the below link from where it is copied:[Lock Quotation Changes when Sales Order is already Created;
Regards,
Amitesh Anand

How to hide a tab? register tab should not apper after user logs in

Hi,
In our portal, we enabled self registration with custom registration page. We wrote a portlet for registraion and added registration page a tab on the portal page.
But after a user registers and logs in, we don't want to show the registration tab.
If you have any idea on this, please let me know.
Thanks,
Sasi Bhushan.

Hi,
After registration, users will be redirected to login page.
When users log in with userid/password, we need to take them to the home page of the portal. In our case, we gave a tab for "home" just like we gave for registration.
So, users should be on the home tab of the portal and now, users should not see registration tab.
This is the requirement.
Thanks,
Sasi Bhushan

PO Qty should not Amended after GR

Similar Messages

Maybe you are looking for