PO Qty should not be more than PR Qty

Hi All,
I am creating a PO from PR.
I want that the PO qty should never be more than PR qty, and if so it should give an error.
Can anyone tell me the BADI or exit for this? I have already seen exits for PO and PR, but I am not able to figure out which exit to use.
Thanks in advance.
Vinod.

Hello,
  You can use the function exit EXIT_SAPMM06E_012 to carry out this validation.
Thanks,
Venu

Similar Messages

  • Commercail invoice qty should not be greater than PO qty.

    Hi,
    We have a requirement where, system should check for the commercial qty with PO qty and if commercial invoice qty exceeds than PO qty, system should give an error. This is required to avoid duplicate payment of customs duties.
    This functionality should work for parking and posting of commercial invoice both.
    Please suggest relevant solution.
    Thanks & Regards,
    Bhargavi.

    Hello,
      You can use the function exit EXIT_SAPMM06E_012 to carry out this validation.
    Thanks,
    Venu

  • HOW TO STRICT DELIVERY QTY SHOULD NOT BE MORE THEN SO QTY.

    DEAR ALL,
    WE ARE FACING ONE  PROBLEM, SYSTEM IS ALLOWING TO DELIVER ADDITIONAL QTY. COMPAIR TO SALES ORDER QTY. IN MY SO I PUT 100 QTY AND IN DELIVERY (VL01N) I SELECT PICKING QTY AS 150 IN THIS CASE SYSTEM ALLOWS TO DELIVER MORE QTY THEN SO. I NEED TO RESTIRCT THIS PL. GIVE SUGGESTION ON THE SAME. IF YOU GO TO MMBE THERE IS SUFFICIENT STOCK IN SYSTEM.
    PL. CHECK.
    NIKHIL

    Hi Nikhil,
    In the item shipping tab of sales order, there is a field "Delivery
    torlarance", you could set the overdelivery torlarance percentage
    according to your requirement.(if it is blank, system would treat it
    as 0)
    Then in the customizing of delivery item category(Tr-cd: 0VLP),
    there is a field "Check overdelivery", you could set it to A or B
    to control system issing warning or error message if user carries out
    overdelivery.
    Thanks,
    Alex

  • Purchase Order Quantity should not be more than PR quantity

    Dear all,
    We want to control Purchase Order quantity against Purchase Requisition.
    We have configured message setting 00 076 as  ERROR. when we create Material PR for lets say 100 quantity. When we create single or multiple Material PO against this PR for more than 100 quantity system is giving us error. This is exactly what we needed.
    But due to this message setting when we create Service PR and give service quantity lets say 100. and when we create Service PO and give Service quantity 60. First time system is allowing to save the Service PO.
    When we create another Service PO with reference to same Service PR system is showing error as we have configured. Even though quantity 40 is still available.
    What we want is to have control on quantity of Purchase Order for Material as well as service. Quantity should not be more than PR quantity.
    Is there any other way to have such control? please provide other available options to configure.
    Regards
    Kant

    Hi,
    06 076 is only for applicable only in case of material.
    For Service and material both, use 06 400 as error "Materials/services for requisition & & already ordered with & &"
    NOtes 786736
    This may help u !
    Regards,
    Pardeep malik

  • Downpayment should not be more than PO Value

    Dear All
    Down payment against purchase order
    Downpayment should not be more than PO Value
    here i want control material wise taht mean some of the material shouble be allow the exces payment and some of the material should not be allow the exces amount. againt purchase order
    Regards
    Navap

    Hi,
    For your you need to write Validation in OB28 and take help of your ABAPEr, the logic will be:
    1. Create Set through GS01Table MARAField MATNR
    2. Pre-Requisite
        BKPF-BLART = 'Down payment Document"
       Check
        Give Exit Name such as UF101 and in this exit you can ask your ABAper to write code that
    if Material on PO is in Set (created in Step 1) and Advance Amount > PO Amount then post DP
    Message
    Give your own message number
    Hope this helps!
    Br,Vivek

  • Base Amount should not be more than PO net price

    hi
    Base Amount should not be more than PO net price , in MIGO  if the Material is excisable excise tab will be populate i can able to change the base amount . i need the restriction Base Amount should not be more than PO net price , this requirement for purticarly for the dealar relegated tax codes . i am not maintain any conditions relegated BED ,ECESSand SECESS in the taxcode . i will eater the excise tab in MIGO or J1IEX Directly . please advise me how to restrict
    @sakhi

    if that is the case why are you proividing the Authorization for MIGO_GR transcation...........Restrict the MIGO transaction and try to give MB01 transaction .So that there will no discrepancy in PO to GR....

  • How to write validation in java sript item should not allow more than 20 ch

    HI,
    I need to write validation in java script for a item it should not allow more than 20 characters.
    Thanks
    Nr

    If this answers your question, please mark your question as answered (so everyone knows it is answered) and assign points where you see fit..
    Thank you,
    Tony Miller
    Webster, TX

  • Should not allow more than one attendance or absence code on any given day

    Hi Hr Experts ,
    I need to use customer enhancement in my program.
    CATS should not allow more than one attendance or absence code on any given day. requirement is
    that each day will be either a full attendance or full absence and there will not be any mixture.
    Function/Program: u2022
         EXIT_SAPLCATS_006: CATS: Validate Entire Time Sheet
    transaction code CAT2.
    how to code the same?

    hai,
    check the Time constraint class for absence/attendance types.
    Regards,
    Chiran Reddy.

  • Residual payment should not allow more than Vendor Invoice

    Hi,
    Eg: Vendor has booked invoice 5000 INR, when user make payment through F-53 or F-58 through "Residual" payment user can pay more than invoice 5002 INR and below accounting entry is posting.
    Bank Cr 5002 INR
            To  Vendor Dr 5000 INR (Invoice amount)
            To  Vendor Dr 02    INR  Excess than invoice 
    Business requirement is system should not allow pay more than invoice amount. How to control suggestion would be appreciated.
    I have done below settings for your understanding here system configuration.
    1. OBA3: Under "Permitted Payment difference" zero for Gain , Loss , Amount, Percent & Adjust Discount By  However "Permitted Payment Differences for Automatic write-Off(Function code AD)" zero.
    2. OBA4: Cash discount per line item: Zero and Under "Permitted Payment difference" Revenues, Expense, Percent & Cash discount  put Zero.
    Regards,
    Babu.

    Hi Prashant,
    I have restricted many fields to use through screen variant now user can not pay more than Invoice amount except through Residual payment process.
    Client side management strongly says that they want to use Partial and Residual payment process options but user should not allow pay more than invoice amount.
    If any solution please guide me.
    Regards,
    Babu.

  • Confirmation qty in co11 should not be more than operation GR qty (subc)

    hi,
    i have an issue after the operation(external process). we made GR in migo. it will be updated in particular production order
    co03 - operation overview - select operation - ext proc tab - GR quantity ( here it is updated after migo)
    now we have to do confirmation in co11. yield+ scrap = GR quantity(external operation quantity) 
    it should not more that of GR quantity.
    sometimes they do partial receipt and do remaining operation in inhse.
    so system should check First operation GR quantity , while making confirmation in co11
    is it possible????
    thanks in advance...

    Prakhash,
    You will have to implement the Production Order Confirmation user-exits to check based on your requirement. Try the below user-exits and see which one meet's your requirement.
    CONFPP01 |PP order conf.: Determine customer specific default values  |
    CONFPP02
    PP order conf.: Customer specific input checks 1
    CONFPP03
    PP order conf.: Cust. specific check after op. selection
    CONFPP04
    PP order conf.: Customer specific input checks 2
    CONFPP05
    PP order conf.: Customer specific enhancements when saving
    CONFPP06
    PP Order Confirmations: Actual Data Transfer
    CONFPP07
    Single Screen Entry: Inclusion of User-Defined Subscreens
    Try and revert back.
    Regards,
    Swapnil

  • Validate that user should not enter more than specified number of digits/chars?

    Hello
    First case: I have placed a TEXT field on the form. Now i want to put the below validation,
    1) User has to enter only numbers (no decimals)
    2) Only 10 digits
    If not i need to
    1) Alert app.alert
    2) Make the field either CLEARIng or considering & resetting only the first 10 digits (if user entered more than 10 digits)
    2nd case: Same as above, a TEXT field, but, the data is with a DECIMAL notation, the allowed lenghts are as
    2 digits as prefix to decimal
    2 digits as suffix to decimal position
    example, 35.88
    Pls. let me knw the Java Script for these 2 cases or do you suggest me PATTERN validation if so, can i CLEAR or reset  and if so, pls. let me know under which TAB(Display / Edit / Data) i need to put the PATTERN validation?

    Firstly if you are only allowing numbers then the field should be a numeric field not a text field. You can use patterns to allow only whole numbers or to have 2 digits on either side of the decimal.
    In regards to the number of digits you can use the len function to determine the length of the data and if it is too long give a message or clear it.

  • Delivery Qty should not be greater then po qty

    HI
    SAP Guru's
    Delivery quantity should not greater then po qty.
    my problem is they are rising mulitiple devliveries for one PO
    Code written in MV50AFZ1 is not working because it is checking only if Delivery Qty more then PO qty, I tries to sum qty from LIPS table using VBGLN Cust po no  but VBGLN is non key field in LIPS table. It is giving perfomance problem.
    Please suggest if any other tables to SUM the delivery quantity.
    regards
    ravi N
    9866595994

    Hello Experts..
    Need ur expertise advice on above issue...

  • QTY in return order more than billed QTY

    hi
    i am trying to rasie an return order with ref to billing doc and copying the quantity.
    Though the qty is getting copied from ref doc,i am able to increase the qty more than billed.
    the system is through an waring msg ,but allowing me raise the return order with greater qty.
    Same is with subsequent delivery free of charge too,i am able to raise order with this doc type w.r.f to return order and giving greater qty than ref doc.
    it is allowing me to go ahead the finish the sales cycle.
    Can any one guide me how to restirct the system from taking qty if it greater than the qty from the ref doc?
    how and the path in spro please.
    thanks
    shashi

    Dear Mr Chavva,
    Trust the message is as follows:-
    Class :V4 and Number: 229.
    Body of the message is:
    Item &1: Order quantity (&2) greater than billed quantity (&3).
    If so kindly attempt the following:-
    using transaction OVAH kindly locate the message and change its settings from W (warning) to E (error).
    Kindly simulate the transaction, expecting it to fail.
    In case of disappointments, kindly explore a setting the user exit MV45AFZZ disabling saving of the document in case the quantity exceeds reference document quantity.
    Trust the reply is useful.
    Regards,
    K Gopidas.

  • Downpayment should not be more than PO Value including tax and other charg

    Hi
    when we create a down payment request thru F-47, it checks on basic amount ,but we want it checks with total PO value and at the same time for all po line itmes. How is possible. please help.
    Regards

    Dear Avinash,
    We had the same issue.
    There is no standard configuration in SAP because system  throws error when the net value in PO is exceeded.
    But your requirement is when Gross value (Net Value + Freight, legalization charges etc) is exceeded the system should throw the error.
    We had to take help of our ABAP team to create user exit.
    They added a break point with the logic of throwing error when Gross value is  exceeded.
    It worked for us.
    Regards
    Saurabh

  • Delivery qty should not exceede Sales order qty

    Dera Friends,
    System is allowing to create delivery for a higher quantity than in sales order. For eg. The sales order is created for 10 pieces and delivery is created for 20 pieces.
    We want to have a check on this. Pls guide where we can configure this. Our requiremnt is that Delivery qty should not exceede the sales order qty.
    points assured
    Krishna>C

    hi,
    Go to VTLA, select your order type and delivery type and select item category and see whether you have maintained the following:-
    Order requirements:::::101
    Item Data:::::::::::::::::::101
    Updata Document flow:::X
    Pos./neg.quantity::::::::::+

Maybe you are looking for

  • Best method for plotting data array?

    I am reading data from a Delta Motion controller and writing that data to an array in my vb.NET program.  The data is not time stamped but I know what the sampling interval is (0.001s).  I want to take that data and plot it on my Waveform Graph.  Wha

  • ABAP UME synch with J2EE

    I have setup MI server ABAP + J2EE however I am having issue with synching the user accounts. I can tell the j2ee user accounts are synching with the ABAP stack client 001. How and where do I change J2ee ume to synch with my productive client 500 aba

  • Print Service API Errors

    Hi, I am trying to use the new print services API's, I have a code example that will complie but failes at runtime. I am using Wepshere develoment studio client for the Iseries (V4.00). Can any one help me get this example running ? Error Message >>

  • Trying to call a program within a Java application

    Hi, I am trying to call a program from within a Java application. Here's my code: // the program siftwin32 takes it's input via < and outputs using > String command = "C:/Demo/siftDemoV4/siftDemoV4/siftWin32.exe < c:/demo/query.pgm >c:/demo/query.key

  • Pages can't find pictures

    Macmini has no problem but both MB Pro and MB Air don't see iPhoto from media selection icon. User is told to go to iPhoto. All three machines have and use both iPhoto and Aperture.