Po quantity value showing difference for only decimal qty range

Hi Experts,
          In purchase for  line items which contains decimal qty like 0.232 , it is taking net price also in decimal format.But for other line items it is displaying correctly(whole qty no's)..
pricing conditions we maintained at info record level.
attached doc for your reference.  
Thanks & regards,
Deepika

have you checked is there any rounding rule for condition type which is suggested by span 1.
One think I have noticed, your amount is showing 2.09, but my amount is showing 2.08.
And your value is showing for J3AP condition type. J3AP is used for SAP AFS material.
Regards
Dev

Similar Messages

  • IPhoto's Slide Show allows for only one song !

    I love the feature of iPhoto's slide show for a user to accompany a slide show with music from one's iTunes library. However, you can only pick one song. That means that if you have a slide show longer than one songs worth of time (most slide shows will be this way), the song will just keep repeating.
    Sure would be nice if there was a way to either play mutiple songs from a user's iTunes playlist. Alternatively, I've heard that the a capability may exist (outside of iTunes) to concatenate multiple songs together to accomplish the same end.
    Any suggestions on how to do either of the above?

    Hey Baheno,,
    there's so many Roads that lead to Rome!
    Road #1
    You can consolidate 2or more songs together in iTunes and name that (2 in 1) big song, Say, "eye of the tiger 2in 1) so this way it will be easy to locate it in the iTunes library while searching through iPhoto. Else you can create a separate albums in iTunes, and you put there only songs that are combined together.
    Road #2
    This is the one I prefer. You can export your slide show to QT (Quicktime). it requires some calculation to create a slide show that ends with the end of 1 song. Then you create another QT slide show, that ends with another songs.... etc..... after you merge all the parts together and you have a very long slide show with many songs!
    Transitions:
    Keep in mind that exporting to quicktime uses only the desolve transition. Which is fine with me. I have seen so many people doing some power point presentation and slide show with photos and using a array of different transitions..... in the same slide show.....it is disturbing, and takes away from viewing pictures. In cinema, it is said: "the thecniques should remain invisible" so keep the disolve transition... it is the least obtrusive .... your viewers, will never complain that there was no "cube effects"! Only you know about the missing effects!
    Self contained file.
    When you export to QT, you now have a file that you can send people through e-mail (given that it is a reasonable size) or you can even post them on web page! like a .mac page.
    When you want to view the show, you just click on the file and play it. No need to start iPhoto. No need to have a MAC, it can be seen on a PC too with QT. You can put it on a CD or DVD, and can be viewed on a DVD player.
    But when you play your slide show directly from iPhoto, you have to be in front of your mac, you have to have iPhoto open! But you can have you mac connected to a TV in the living room (I do) and then can play the slide show from iPhoto, using a TV-VGA adaptor that will play on your living room TV for a larger crowd to see. It can also be played through the sound system!!!! infinity and beyond!!
    If you want more specific on how to export to QT and merge 2,3,4,5 files post back. I will get more into it.
    I always export to QT, because this way, in the future, you do not have to mess around again in selecting the photos needed, and selecting the songs in iPhoto. I just click the QT file, and it will always play the same!
    hope this helps!
    Michel

  • HTML CFGRIDCOLUMN values showing up for valuesdisplay issue

    I'm using cfgrid type=html.  I am creating a dropdown box in the cfgrid, however in the dropdown box it is showing the Values, instead of the ValueDisplay in the dropdown box.
    <cfgrid name = "SecondGrid"
            height="200" width="700"
            font="arial" fontsize="12"
            query = "getsecurity"
            SORT="Yes"
            selectmode="edit"
            format="html"
            insert="yes"
            delete = "#deletevalue#"
            >
    <CFGRIDCOLUMN NAME="userrole" HEADER="User Role"
            HEADERALIGN="LEFT" DATAALIGN="LEFT"
            BOLD="Yes" ITALIC="No"
            SELECT="Yes" DISPLAY="Yes"
            HEADERBOLD="No" HEADERITALIC="Yes"
            VALUES = "teacher,adminassist"
            VALUESdisplay = "Teacher, Administrator"  valuesDelimiter=",">
    </cfgrid>
    Thanks for your help!
    BCo

    Coladan,
    This is, most likely, a rounding problem.  The sum of the numbers is probably a VERY, VERY, VERY small, negative number.  if you use the round function this should resolve.
    instead of using:
    =SUM(P4:P5)
    try:
    =round(SUM(P4:P5), 2)
    Where "2" is the number of digits to the right of the decimal

  • Comparison gives error / not show differences for File Protection

    We tried to verify on our MS (Version 6.0.2) with comparison two Installations with:
    "Comparison Style:      install to install"
    "Level of Detail:      directory and file properties"
    (as you can choose in the UI)
    1) Seems that he don't catch file protection (which are different from one Installation to the other, we tried this with a very simple comparison run with only two files to compare .....)
    2) A comparison on a Installation with a lot of Files to compare (BEA-Weblogic Installation) it gives following Error Messages:
    A comparison failed because Unable to complete the install to install comparison under path "/opt/bea/wlserver923/weblogic92/server/bin/international"|Ensure that you have read permission on the directory and try again. (600094) on 10/31/08 1:42:11 PM MET. The comparison used settings: wls-9.2.3-1.
    But this Directory got the following protection on reference and comparison host:
    [n1sps@usv0412 ~]$ ls -ld /opt/bea/wlserver923/weblogic92/server/bin/international
    drwxr-xr-x 2 wlsadmin wls 4096 Oct 31 12:42 /opt/bea/wlserver923/weblogic92/server/bin/international
    What could be wrong?
    Does anybody use this comparison “Install to Install” ?
    Regards, Hanspeter
    PS: I've got documented this comparison more exactly in a Word-Doc. But unfortunately there’s no possibility to attach this to the forum.
    Edited by: HanspeterK on Oct 31, 2008 6:56 AM

    I wonder how much anyone is using this functionality. We are stated to use comparison in "install to install" mode and getting the same error. For me it looks it is failing on empty dirs. We are trying this on both win and solaris machines and getting the same problem.
    Did someone got this functionality (which is very good!!!!) working smoothly?

  • Net value showing negative in excise billing for free goods items

    Dear All,
    Need value suggestions in business scenario.
    While issuing Free goods to customer in excise billing ,Net  value of ZTNN item showing negative
    Inserted R100 % condition type above Tax condtions.
    MRP is statistical and accessable value is calculated on MRP.
    How to  solve the above issue.
    Due to the Net value showing negative for Free of charge in excise billing,qty value  displaying twice the unit price value in printing
    Thanks & Regards
    H V Kumar.

    Hi
    It is depends on your pricing procedure how you defines.
    Kindly check once again in your pricing procedure.
    Test the cycle once again without entering the R100 condition type in sale order line item and check the next value.
    After enter the R100 condition type check the base value to calculate the Amount.

  • AA implement aaset value for only one depreciation area

    Hi,
    Is it possible change acquisition value of asset for only one depreciation area, the area 20 for example?
    By point of view of FI I can post the accounts of area 20 by  trx OASV,
    but in AA how can I do?
    If I use the trx AB01 the  acquisition value is modified in every area.
    Any assistance would be greatly appreciated.

    You upload the values in AM with the transaction AS91, this don't create postings in FI. It is possible to upload different values by depreciation area.
    With the transaction OASV you create manual the total postings in FI. An other option is to use the transaction  ABF1 (search on this forum with ABF1 how it is working)
    When an area post direct you have to use the transaction OASV (asset account is reconcilation accounts) for the other area you can use a standard FI posting.
    When you use AB01 you can create you own transaction type and limet them to one depreciation area or a group (tray to play with Tty 147, there you can fill in amounts by depreciation area.)

  • For object XABBELEGNR , number range interval  does not exist OMJ6

    Dear all
            I want to enter only the value between 1 to 5 in GR/GI Slip No for T.code Mb01,but it is not allowing it is showing as For object XABBELEGNR , number range interval  does not exist OMJ6.
    Kindly let me know how to proceed,so that i can enter value between 1 to 5 in that field.
    regards
    M.Chandra mohan

    hi
    u just go to tcode omc1.
    activate gr/gi slip for plant
    then create number range group code and assign it to plant ,storage location and movenent type combination.
    Then u can create the intervals thru OMJ6.
    Hope it helps
    rewrad if useful
    Rohit

  • CP7 - Show 4 (or more) decimal points for User Variable?

    Is there a way to show 4 or more decimal points for user variables?
    For some reason, I'm only showing two decimal points for user variables in Captivate 7.
    Micky

    Yeah, I was afraid of that.
    Right now, I have am dividing the values of two separate text box entry fields.  I have to calculate the values to determine if they are getting a promotion, lateral transfer or lower pay range.
    I'll figure out a workaround or just use java.

  • Can I show a data label for only one point in a series?

    Forgive a newbie question from an Excel convert, but can I show a value label for only one point in a data series? If yes, how?
    There are a number of graphs where I only want to value of either an extreme value or the ending value to show. Having all the labels in a series makes the chart too busy. This is pretty easy to do in Excel.
    If this can't be done, I guess that adding a text box over those points would work.
    Thanks

    Hi W-T,
    Welcome to Apple Discussions and the Numbers '09 forum.
    wahoo_tiger wrote:
    Forgive a newbie question from an Excel convert, but can I show a value label for only one point in a data series? If yes, how?
    Sure. Here's and example labeling only the MIN and MAX points.
    Column B contains the data charted with the blue line.
    Column C extracts the MIN and MAX values using the formula below. Those two values are charted as a separate series, using the green data point markers, and are labeled with their values. The intervening empty string values appear to have doused the lines connecting the two data points.
    Formula: =IF(OR(B=MAX(B),B=MIN(B)),B,"")
    Regards,
    Barry

  • Need to create a report to show values for a particular date range

    I have to create a report, out of which I need two columns : << Customer Value Variance and Churn Score Variance >> to show values only for a custom date range, which will be entered via a dashboard prompt.
    These generic date columns are not present and cannot be added. I have to make use of Pres variables
    What I have currently done is:
    1) Created a prompt with 2 different date columns and passing those values into variables vStartDate and vEndDate. (I don't actually need those 2 column which I have selelcted, but I have taken those so that I can prompt the values in calendar format and pass onto the variables)
    2) Created report with necessary columns, with 2 extra columns (hidden) as vStart Date Column and vEnd Date Column which take the values from the presentation variables defined in the prompt. I have created these columns as then I can reference these in the two required columns if necessary.
    I am already facing error in report after doing this and I am confused how to proceed. Any suggestions?
    Thanks.

    Yes, but it only has one generic Date column, no start date and end date. I can't use that twice in the prompt. Although I can specify it to be 'between', but I'm not sure I can pass values to both variables like that.
    Currently I have used Campaign Start Date and Campaign End Date to enter values in calender format to the variables.

  • Copa there is a option for reset value field / quantity value filed

    Hi
    As per the sap standard in copa there is a option for reset value field / quantity value filed. We
    use this function to reset a quantity or value field depending on the
    billing type (For eg L2 (Debit Memo) G2(Credit Memo). This means that
    the condition value set in the field is replaced by value 0. Due to
    this quantity value filed in copa reflects nil. My client requirement is when profit center document is generated System should display the quantity as nil.
    i have tried some enhancement but these enhancement is only used in  case of PGI . But in the case of debit and credit memo their is no PGI. first we create debit not request (va01) then billing(vf01) then document is generated .
    Can we do the same thing in profit center Accounting? When PCA document
    is generated System should display the quantity as nil.
    Please let me know some user exit or substitution or Bte  we can use ?
    Anjali

    hi Jerry,
    Very appreciated the link you sent.  In this article of this link,  it gives an example of a conversion from an external to an internal format:
    1. '1234 ' -> '00001234'
    2. 'ABCD ' -> 'ABCD '
    Just wonder why the external format '1234 '  has to be converted to '00001234', what's the purpose of doing this converstion?
    Thanks!

  • OMS2 setting for quantity & Value update.

    Whenever new plant is  created (after go live), we have to do the the Qty & Value update (OMS2)  for that new plant/valuation area for each individual material type.
    While doing this we have select the material type  individually for each material type & then checking the Qty & Update field which takes lot of time.
    I like to understand is there any smart way to update the quantity & value update for all material type in single screen. Currently we have to go to individually for each material type.
    This will save lot of time & Smartness in consultant work.

    Hi,
    Plant is considered as an operating area or a branch or a location within a company which concerning with production facility or branch office or large warehouse storage .
    When a new plant is created – it is always better to check OMS2, OMWD and other related assignment or copy from existing running plant. Also there are other related factors individually involved to plant only for which a new plant is required; all are needs to be attended. So instead of saving time, better check all settings (excise registration, if any) for anew plant to work business effectively.
    Regards,
    Biju K

  • COGS Value showing as null for Projects

    Hi All,
    We have a report called Revenue Report. In this report we track the revenue and cogs value for both OM orders and Projects. We are able to see th cogs value for OM order(i.e. sales order)but not for projects. We are using OOTB out of box mapping(i.e.SDE_ORA_GLCOGS) for populating cogs value.So we have approached oracle team to address this issue. Please find the below reply from Oracle. Can somebody help me how to calculate COGS value for projects.
    BIApps 7.9.6.x do not support the integration of Project and COGS out of the box. If you have cogs trx from Projects and would like to extract these trx, you can customize the SDE sql.
    [OOTB sql in SDE_ORA_GLCOGS]
    WHERE
    MMT.TRANSACTION_TYPE_ID IN (15, 33, 10008) AND
    (MMT.TRANSACTION_ACTION_ID,MTA.ACCOUNTING_LINE_TYPE ) IN
    ((27, 2), (1, 36), (36, 35))
    MMT : MTL_MATERIAL_TRANSACTIONS
    MTA : MTL_TRANSACTION_ACCOUNTS
    15 = RMA Receipt (Return Material Authorization)
    33 = Sales order issue (Ship Confirm external Sales Order)
    10008 = COGS Recognition
    (27, 2) = (Receipt into stores, Account)
    (1, 36) = (Issue from stores, Deferred Cost of Goods Sold)
    (36, 35) = (COGS Recognition, Cost of Goods Sold)
    These are OOTB default values to extract the cogs trx for sales order etc. These are configurable. You can add/modify these values as needed. You can check the OLTP MTL module for the meaning of each values

    Please do not post duplicates -- COGS Value showing up as null Projects

  • Birthday calendar for only some of my contacts are showing up twice in my iPhone. They are not showing up twice tho on my iMac. No, I do not have duplicate names in my address book either. Any idea how to fix that?

    my birthday events for only some of my contacts are showing up twice in my iPhone. They are not showing up twice tho on my iMac. No, I do not have duplicate names in my address book either. Any idea how to fix that?

    I have uploaded the InDesign file so that you can take a closer look at:
    http://www.hsdesign.comuf.com/downloads/
    The file is called "Template_File.indd"
    So, as discussed the main issues are:
    1) The TOC doesn't generate all the listings (only those with the applied paragraph style "Heading 1 - Appendix")
    2) When I try to create a new pargraph style and apply it to existing or new text, it reads the pargraph style in the Paragraph Style menu, but the style doesn't actually apply.
    Hopefully you can figure something out from this. I really appreciate your help.
    Thanks!

  • HT201263 iphone only shows logo for 13 seconds when connected to pc thats all it does however i connected to wall socket it goes up to connect to itunes but when i unplug it then it switches off

    iphone only shows logo for 13 seconds when connected to pc thats all it does however i connected to wall socket, it goes up to connect to itunes but when i unplug it then it switches off.
    this is coincidently after an ios update for iphone which i did just approx two days earlier which was suppused to fix battery issues?
    also battery shows 100 percent full but as i explained if disconected from socket it switches off altogether.

    Hopefully and most likely faulty battery. If you have Warranty or AppleCare, make Genius reservation and take to Apple for resolution.

Maybe you are looking for