PO R3-SUS send error XI

Hello     
We have SRM 5.0 extended scenario with ECC 6.0.
When I create a PO in SRM and it send to SUS, the PO are Ok.
The problem I have it in the PO of R3 to SUS. Idoc is sent correctly, but SUS it receives it with error in XI.
An error occured within an XI interface: Exception occurredE:BBP_PD:147 -Enter a country for partner 0000000126 with type 'Sold-to Party' E:BBP_PD:147 -Enter a country for partner 0001000022 with type 'Vendor' E:BS:002 -"Create" is not allowed (SUS Purchase Order 3300000096 ) Programm: CX_BBP_BD_ERROR===============CP; Include: CX_BBP_BD_ERROR===============CM002; Line: 57
I have read some threads that handle some solutions like updating via trx BBP_SUS_BP_ADM the partners.
However the partners were updated of SRM to HIS by transactions BBP_SP_SUPP_INI and BBP_SP_COMP_INI for vendors and companies and are complete in their data.
I need the advice of you.

Hi,
We are facing th below issue in srm while transferring the invoices from mm to sus
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!--
Call Inbound Proxy
  -->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
  <SAP:Category>XIProxy</SAP:Category>
  <SAP:Code area="ABAP">DYNAMIC_CALL_FAILURE</SAP:Code>
  <SAP:P1>UNCAUGHT_EXCEPTION</SAP:P1>
  <SAP:P2>CL_BBPX1_SUSIV_IN</SAP:P2>
  <SAP:P3>EXECUTE_ASYNCHRONOUS</SAP:P3>
  <SAP:P4 />
  <SAP:AdditionalText />
  <SAP:ApplicationFaultMessage namespace="" />
  <SAP:Stack>Error during proxy processing An exception with the type CX_BBPX1_STD_MESSAGE_FAULT occurred, but was neither handled locally, nor declared in a RAISING clause Application Error</SAP:Stack>
  <SAP:Retry>M</SAP:Retry>
  </SAP:Error>
Trace:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!--
Call Inbound Proxy
  -->
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
  <Trace level="1" type="B" name="CL_XMS_HTTP_HANDLER-HANDLE_REQUEST" />
- <!--
  -->
  <Trace level="1" type="T">XMB was called with URL /sap/xi/engine?type=receiver</Trace>
  <Trace level="1" type="T">COMMIT is done by XMB !</Trace>
  <Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
- <!--
  -->
  <Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
- <!--
  -->
  <Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
  <Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV" />
  <Trace level="1" type="T">****************************************************</Trace>
  <Trace level="1" type="T">* *</Trace>
  <Trace level="1" type="T">* *</Trace>
  <Trace level="1" type="T">XMB entry processing</Trace>
  <Trace level="1" type="T">system-ID = SRM</Trace>
  <Trace level="1" type="T">client = 100</Trace>
  <Trace level="1" type="T">language = E</Trace>
  <Trace level="1" type="T">user = SC2354</Trace>
  <Trace level="1" type="Timestamp">2008-08-25T07:26:51Z INDIA</Trace>
  <Trace level="1" type="T">* *</Trace>
  <Trace level="1" type="T">* *</Trace>
  <Trace level="1" type="T">****************************************************</Trace>
  <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
- <!--
  -->
  <Trace level="1" type="T">Message-GUID = 48B266CC39E920E8E10000000AC83195</Trace>
  <Trace level="1" type="T">PLNAME = RECEIVER</Trace>
  <Trace level="1" type="T">QOS = EO</Trace>
  <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
- <!--
  -->
  <Trace level="1" type="T">Get definition of external pipeline = RECEIVER</Trace>
  <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
  <Trace level="1" type="T">Get definition of internal pipeline = SAP_RECEIVER</Trace>
  <Trace level="1" type="T">Queue name : XBTR0003</Trace>
  <Trace level="1" type="T">Generated prefixed queue name = XBTR0003</Trace>
  <Trace level="1" type="T">Schedule message in qRFC environment</Trace>
  <Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
  <Trace level="1" type="T">----
</Trace>
  <Trace level="1" type="T">Going to persist message</Trace>
  <Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
  <Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
  <Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
  <Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
  <Trace level="1" type="T">----
</Trace>
  <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- <!--
  -->
  <Trace level="1" type="T">--start sender interface action determination</Trace>
  <Trace level="1" type="T">select interface *</Trace>
  <Trace level="1" type="T">select interface namespace</Trace>
  <Trace level="1" type="T">no interface found</Trace>
  <Trace level="1" type="T">--start receiver interface action determination</Trace>
  <Trace level="1" type="T">Loop 0000000001</Trace>
  <Trace level="1" type="T">select interface InvoiceRequest_In*</Trace>
  <Trace level="1" type="T">select interface namespace http://sap.com/xi/SRM/SupplierEnablement/Global</Trace>
  <Trace level="1" type="T">no interface found</Trace>
  <Trace level="1" type="T">--no sender or receiver interface definition found</Trace>
  <Trace level="1" type="T">Hence set action to DEL</Trace>
  <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
  <Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
  <Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- <!--
  -->
  <Trace level="1" type="T">----
</Trace>
  <Trace level="1" type="T">Starting async processing with pipeline RECEIVER</Trace>
  <Trace level="1" type="T">system-ID = SRM</Trace>
  <Trace level="1" type="T">client = 100</Trace>
  <Trace level="1" type="T">language = E</Trace>
  <Trace level="1" type="T">user = SC2354</Trace>
  <Trace level="1" type="Timestamp">2008-08-25T07:26:52Z INDIA</Trace>
  <Trace level="1" type="T">----
</Trace>
  <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- <!--
  -->
  <Trace level="1" type="T">Get definition of external pipeline RECEIVER</Trace>
  <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
  <Trace level="1" type="T">Corresponding internal pipeline SAP_RECEIVER</Trace>
  <Trace level="1" type="B" name="PLSRV_CALL_INBOUND_PROXY" />
- <!--
  -->
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
  <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- <!--
  -->
  <Trace level="1" type="B" name="Inbound Framework" />
- <!--
  -->
- <asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
- <asx:values>
  <CX_ERROR href="#o188" />
  </asx:values>
- <asx:heap xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:abap="http://www.sap.com/abapxml/types/built-in" xmlns:cls="http://www.sap.com/abapxml/classes/global" xmlns:dic="http://www.sap.com/abapxml/types/dictionary">
- <cls:CX_SY_NO_HANDLER id="o188">
- <CX_ROOT>
  <TEXTID>1F09B73915F6B645E10000000A11447B</TEXTID>
  <PREVIOUS href="#o187" />
  <KERNEL_ERRID>UNCAUGHT_EXCEPTION</KERNEL_ERRID>
- <INTERNAL_SOURCE_POS>
  <PROGID>325</PROGID>
  <CONTID>3133</CONTID>
  </INTERNAL_SOURCE_POS>
  </CX_ROOT>
  <CX_NO_CHECK />
- <CX_SY_NO_HANDLER>
  <CLASSNAME>CX_BBPX1_STD_MESSAGE_FAULT</CLASSNAME>
  </CX_SY_NO_HANDLER>
  </cls:CX_SY_NO_HANDLER>
- <cls:CX_BBPX1_STD_MESSAGE_FAULT id="o187">
- <CX_ROOT>
  <TEXTID>65B8FEB5F43CC949B7CD662AB888ED34</TEXTID>
  <PREVIOUS />
  <KERNEL_ERRID />
- <INTERNAL_SOURCE_POS>
  <PROGID>325</PROGID>
  <CONTID>3369</CONTID>
  </INTERNAL_SOURCE_POS>
  </CX_ROOT>
  <CX_DYNAMIC_CHECK />
  <CX_AI_APPLICATION_FAULT />
- <CX_BBPX1_STD_MESSAGE_FAULT>
  <AUTOMATIC_RETRY />
  <CONTROLLER />
  <NO_RETRY />
- <STANDARD>
  <CONTROLLER />
  <FAULT_TEXT>An error occured within an XI interface: Exception occurredE:BBP_PD:147 -Enter a country for partner with type 'Sold-to Party' E:BBP_PD:428 -Enter exactly one partner of type Sold-to Party I:R5:553 -'Different country' field contents deleted because identical to 'Country' E:BS:013 -System status INCM is active (SUS Invoice 5000000731) Programm: CX_BBP_BD_ERROR===============CP; Include: CX_BBP_BD_ERROR===============CM002; Line: 57</FAULT_TEXT>
  <FAULT_URL />
  <FAULT_DETAIL />
  </STANDARD>
  </CX_BBPX1_STD_MESSAGE_FAULT>
  </cls:CX_BBPX1_STD_MESSAGE_FAULT>
  </asx:heap>
  </asx:abap>
  </Trace>
  <Trace level="1" type="T">System Error at Receiver... => ROLLBACK WORK</Trace>
  <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
  <Trace level="1" type="System_Error">Error exception return from pipeline processing!</Trace>
  <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- <!--
  -->
  <Trace level="1" type="B" name="CL_XMS_MAIN-RESTART_ERROR_MESSAGE" />
- <!--
  -->
  <Trace level="1" type="T">Persisting message with status ManualRestart, version: 000</Trace>
  <Trace level="1" type="T">***************************************</Trace>
  <Trace level="1" type="T">* Setup of qRFC Scheduler OK!!!</Trace>
  <Trace level="1" type="T">***************************************</Trace>
  <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- <!--
  -->
  <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
  <Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
  <Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- <!--
  -->
  <Trace level="1" type="T">----
</Trace>
  <Trace level="1" type="T">Starting async processing with pipeline RECEIVER</Trace>
  <Trace level="1" type="T">system-ID = SRM</Trace>
  <Trace level="1" type="T">client = 100</Trace>
  <Trace level="1" type="T">language = E</Trace>
  <Trace level="1" type="T">user = DEV04</Trace>
  <Trace level="1" type="Timestamp">2008-08-25T08:23:20Z INDIA</Trace>
  <Trace level="1" type="T">----
</Trace>
  <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- <!--
  -->
  <Trace level="1" type="T">Get definition of external pipeline RECEIVER</Trace>
  <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
  <Trace level="1" type="T">Corresponding internal pipeline SAP_RECEIVER</Trace>
  <Trace level="1" type="B" name="PLSRV_CALL_INBOUND_PROXY" />
- <!--
  -->
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
  <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- <!--
  -->
  <Trace level="1" type="B" name="Inbound Framework" />
- <!--
  -->
- <asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
- <asx:values>
  <CX_ERROR href="#o191" />
  </asx:values>
- <asx:heap xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:abap="http://www.sap.com/abapxml/types/built-in" xmlns:cls="http://www.sap.com/abapxml/classes/global" xmlns:dic="http://www.sap.com/abapxml/types/dictionary">
- <cls:CX_SY_NO_HANDLER id="o191">
- <CX_ROOT>
  <TEXTID>1F09B73915F6B645E10000000A11447B</TEXTID>
  <PREVIOUS href="#o190" />
  <KERNEL_ERRID>UNCAUGHT_EXCEPTION</KERNEL_ERRID>
- <INTERNAL_SOURCE_POS>
  <PROGID>320</PROGID>
  <CONTID>3133</CONTID>
  </INTERNAL_SOURCE_POS>
  </CX_ROOT>
  <CX_NO_CHECK />
- <CX_SY_NO_HANDLER>
  <CLASSNAME>CX_BBPX1_STD_MESSAGE_FAULT</CLASSNAME>
  </CX_SY_NO_HANDLER>
  </cls:CX_SY_NO_HANDLER>
- <cls:CX_BBPX1_STD_MESSAGE_FAULT id="o190">
- <CX_ROOT>
  <TEXTID>65B8FEB5F43CC949B7CD662AB888ED34</TEXTID>
  <PREVIOUS />
  <KERNEL_ERRID />
- <INTERNAL_SOURCE_POS>
  <PROGID>320</PROGID>
  <CONTID>3369</CONTID>
  </INTERNAL_SOURCE_POS>
  </CX_ROOT>
  <CX_DYNAMIC_CHECK />
  <CX_AI_APPLICATION_FAULT />
- <CX_BBPX1_STD_MESSAGE_FAULT>
  <AUTOMATIC_RETRY />
  <CONTROLLER />
  <NO_RETRY />
- <STANDARD>
  <CONTROLLER />
  <FAULT_TEXT>An error occured within an XI interface: Exception occurredE:BBP_PD:147 -Enter a country for partner with type 'Sold-to Party' E:BBP_PD:428 -Enter exactly one partner of type Sold-to Party I:R5:553 -'Different country' field contents deleted because identical to 'Country' E:BS:013 -System status INCM is active (SUS Invoice 5000000732) Programm: CX_BBP_BD_ERROR===============CP; Include: CX_BBP_BD_ERROR===============CM002; Line: 57</FAULT_TEXT>
  <FAULT_URL />
  <FAULT_DETAIL />
  </STANDARD>
  </CX_BBPX1_STD_MESSAGE_FAULT>
  </cls:CX_BBPX1_STD_MESSAGE_FAULT>
  </asx:heap>
  </asx:abap>
  </Trace>
  <Trace level="1" type="T">System Error at Receiver... => ROLLBACK WORK</Trace>
  <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
  <Trace level="1" type="System_Error">Error exception return from pipeline processing!</Trace>
  <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- <!--
  -->
  <Trace level="1" type="B" name="CL_XMS_MAIN-RESTART_ERROR_MESSAGE" />
- <!--
  -->
  <Trace level="1" type="T">Persisting message with status ManualRestart, version: 002</Trace>
  <Trace level="1" type="T">***************************************</Trace>
  <Trace level="1" type="T">* Setup of qRFC Scheduler OK!!!</Trace>
  <Trace level="1" type="T">***************************************</Trace>
  <Trace level="3" type="T">Manual Restart: increase Tracelevel to 3</Trace>
  <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- <!--
  -->
  <Trace level="3" type="T">Persisting message Status = 016</Trace>
  <Trace level="3" type="T">Message version 004</Trace>
  <Trace level="3" type="T">Pipeline RECEIVER</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE">
  <Trace level="3" type="T">Trace object available again now. OK.</Trace>
  <Trace level="3" type="T">Message was read from persist layer. OK.</Trace>
  <Trace level="3" type="T">Message properties in XMB object were setup. OK.</Trace>
  <Trace level="3" type="ToDo">Make sure we catch exceptions in persist read</Trace>
  <Trace level="3" type="ToDo">Tracing obj. not avail. before return of CL_XMS_MAIN-PERSIST_READ_MESSAGE</Trace>
  </Trace>
  <Trace level="3" type="T">message version successfully read from persist version= 004</Trace>
  <Trace level="2" type="T">Increment log sequence to 005</Trace>
  <Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
  <Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- <!--
  -->
  <Trace level="1" type="T">----
</Trace>
  <Trace level="1" type="T">Starting async processing with pipeline RECEIVER</Trace>
  <Trace level="3" type="T">system-ID = SRM</Trace>
  <Trace level="3" type="T">client = 100</Trace>
  <Trace level="3" type="T">language = E</Trace>
  <Trace level="3" type="T">user = DEV04</Trace>
  <Trace level="1" type="Timestamp">2008-08-25T08:23:31Z INDIA</Trace>
  <Trace level="1" type="T">----
</Trace>
  <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- <!--
  -->
  <Trace level="1" type="T">Get definition of external pipeline RECEIVER</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
  <Trace level="3" type="T">External PLID = RECEIVER</Trace>
  <Trace level="3" type="T">Internal PLID = SAP_RECEIVER</Trace>
  </Trace>
  <Trace level="1" type="T">Corresponding internal pipeline SAP_RECEIVER</Trace>
  <Trace level="3" type="T" />
  <Trace level="3" type="T">Pipeline attributes</Trace>
  <Trace level="3" type="T">PID = SAP_RECEIVER</Trace>
  <Trace level="3" type="T">ENABLE = 1</Trace>
  <Trace level="3" type="T">TRACELEVEL = 0</Trace>
  <Trace level="3" type="T">EXEMODE = A</Trace>
  <Trace level="3" type="T" />
  <Trace level="3" type="T" />
  <Trace level="3" type="T">Pipeline elements</Trace>
  <Trace level="3" type="T">PLSRVID = PLSRV_CALL_INBOUND_PROXY</Trace>
  <Trace level="3" type="T" />
  <Trace level="1" type="Timestamp">2008-08-25T08:23:31Z INDIA Begin of pipeline processing PLSRVID = RECEIVER</Trace>
  <Trace level="1" type="B" name="PLSRV_CALL_INBOUND_PROXY" />
- <!--
  -->
  <Trace level="1" type="Timestamp">2008-08-25T08:23:31Z INDIA Start of pipeline service processing PLSRVID= PLSRV_CALL_INBOUND_PROXY</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
  <Trace level="3" type="T">Calling pipeline service: PLSRV_CALL_INBOUND_PROXY</Trace>
  <Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
  <Trace level="3" type="T" />
  <Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
  <Trace level="3" type="T">PLSRVID = PLSRV_CALL_INBOUND_PROXY</Trace>
  <Trace level="3" type="T">PLSRVTYPE =</Trace>
  <Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
  <Trace level="3" type="T">P_CLASS = CL_PROXY_FRAMEWORK</Trace>
  <Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
  <Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
  <Trace level="3" type="T">FL_LOG =</Trace>
  <Trace level="3" type="T">FL_DUMMY = 0</Trace>
  <Trace level="3" type="T" />
  <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- <!--
  -->
  <Trace level="1" type="B" name="Inbound Framework" />
- <!--
  -->
- <asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
- <asx:values>
  <CX_ERROR href="#o191" />
  </asx:values>
- <asx:heap xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:abap="http://www.sap.com/abapxml/types/built-in" xmlns:cls="http://www.sap.com/abapxml/classes/global" xmlns:dic="http://www.sap.com/abapxml/types/dictionary">
- <cls:CX_SY_NO_HANDLER id="o191">
- <CX_ROOT>
  <TEXTID>1F09B73915F6B645E10000000A11447B</TEXTID>
  <PREVIOUS href="#o190" />
  <KERNEL_ERRID>UNCAUGHT_EXCEPTION</KERNEL_ERRID>
- <INTERNAL_SOURCE_POS>
  <PROGID>320</PROGID>
  <CONTID>3133</CONTID>
  </INTERNAL_SOURCE_POS>
  </CX_ROOT>
  <CX_NO_CHECK />
- <CX_SY_NO_HANDLER>
  <CLASSNAME>CX_BBPX1_STD_MESSAGE_FAULT</CLASSNAME>
  </CX_SY_NO_HANDLER>
  </cls:CX_SY_NO_HANDLER>
- <cls:CX_BBPX1_STD_MESSAGE_FAULT id="o190">
- <CX_ROOT>
  <TEXTID>65B8FEB5F43CC949B7CD662AB888ED34</TEXTID>
  <PREVIOUS />
  <KERNEL_ERRID />
- <INTERNAL_SOURCE_POS>
  <PROGID>320</PROGID>
  <CONTID>3369</CONTID>
  </INTERNAL_SOURCE_POS>
  </CX_ROOT>
  <CX_DYNAMIC_CHECK />
  <CX_AI_APPLICATION_FAULT />
- <CX_BBPX1_STD_MESSAGE_FAULT>
  <AUTOMATIC_RETRY />
  <CONTROLLER />
  <NO_RETRY />
- <STANDARD>
  <CONTROLLER />
  <FAULT_TEXT>An error occured within an XI interface: Exception occurredE:BBP_PD:147 -Enter a country for partner with type 'Sold-to Party' E:BBP_PD:428 -Enter exactly one partner of type Sold-to Party I:R5:553 -'Different country' field contents deleted because identical to 'Country' E:BS:013 -System status INCM is active (SUS Invoice 5000000733) Programm: CX_BBP_BD_ERROR===============CP; Include: CX_BBP_BD_ERROR===============CM002; Line: 57</FAULT_TEXT>
  <FAULT_URL />
  <FAULT_DETAIL />
  </STANDARD>
  </CX_BBPX1_STD_MESSAGE_FAULT>
  </cls:CX_BBPX1_STD_MESSAGE_FAULT>
  </asx:heap>
  </asx:abap>
  </Trace>
  <Trace level="1" type="T">System Error at Receiver... => ROLLBACK WORK</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
  <Trace level="3" type="T">No persisting of message after plsrv call, because of config</Trace>
  </Trace>
  <Trace level="3" type="System_Error">Error exception return from pipeline processing!</Trace>
  <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- <!--
  -->
  <Trace level="3" type="T">Persisting message Status = 014</Trace>
  <Trace level="3" type="T">Message version 005</Trace>
  <Trace level="3" type="T">Pipeline RECEIVER</Trace>
  <Trace level="1" type="B" name="CL_XMS_MAIN-RESTART_ERROR_MESSAGE" />
- <!--
  -->
  <Trace level="3" type="T">Trace object available again now. OK.</Trace>
  <Trace level="3" type="T">manual Restart Flag X</Trace>
  <Trace level="3" type="T">Message Guid 48B266CC39E920E8E10000000AC83195</Trace>

Similar Messages

  • I click on itunes but doesnt open and says send error report or dont send

    i click on itunes but doesnt open and says send error report or dont send

    You will need to provide more details as we cannot see your computer screen. Does this happen every time you launch LabVIEW? What version of LabVIEW are you using? What version of Windows? Does LabVIEW crash? If so, what were you doing at the time it crashed?

  • Itunes wont open/ immediate "send error report message"

    So I had a problem with me trying to install itunes 7.3 because of a missing itunes.msi. I followed the instructions i found from this forum as follows
    "1. Go to http://www.ccleaner.com/ and download and install CCleaner. Run this program and click Run Cleaner. This program will remove most of your temporary files.
    2. Go to http://download.microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1b d/msicuu2.exe and download and install Windows Install Clean Up utility. Click on iTunes and click Remove. Do the same for Quicktime.
    3. Now you need to manually delete all of your iTunes and Quicktime files. This can take a very long time. Just go to C: and start searching through.
    4. Go to the Run box and type in "regedit". Go through all of the folders in there and delete all iTunes and Quicktime files.
    5. Go to Add/Remove Programs and Remove iTunes and Quicktime.
    6. Download iTunes again and install it."
    I then tried to open itunes and immediately a message pops up asking if i want to send an error report to microsoft. It seems as though step 4 might have truly made things worse.
    Someone please help
      Windows XP  

    After you get the send error report message go to:
    Start -> Control Panel (In classic view which can be enabled by clicking view classic.) -> Administrative Tools -> Event Viewer.
    Select the Application log and look for the most recent errors (Marked by a red X).
    Double click on the error and it will show you a full description. For an error similar to the one you are recieving it should report a 'faulting module' in the error.
    Please paste that here. This will help us help you.

  • Itunes wont open, encountered problem and send error report

    Everytime i try to open windows, it says that itunes has encoutered a problem and needs to close. it has the send error report message too. please someone help

    Meaghan, I already responded to your topic. Plus, it is simply not good to bury your post in other people's topics, and just for the future, if you have a problem without a good answer, don't post what has already been said in a thread. I know, the discussions take a little getting used to, but it is easy to get the hang of it after a couple of visits. You'll get it sooner or later. I know you will.

  • Starting Firefox I get the "Send Error Report" popup window. It states "firefox.exe has encountered a problem and needs to close."

    This just started today. Everything seems fine. I just push the popup off to the side and continue to use the browser. If I were to click on the, "Send Error Report" or the "Don't Send" buttons then Firefox just closes!
    Strangest thing yet, trying to figure it out!
    Oh, I tried the reboot without add-ons! Even did the reinstall, still the same???

    Just got back online, still working on things, BUT ???
    I went back and dumped Norton's which I get for free from Comcast. I downloaded the AVG scanner. Went through all the bells & whistles and things seem ok ???? But I haven't done the reboot yet, so will do that soon. But I wanted to drop a line here and let you all know what is happening.
    And Thanks Fred, the funny thing was it did seem to have something to do with their update??? I do like Norton's but my son uses this AVG and he said it was better, lol!!! But again, everyone has their favorite!
    Mine is Norton's so once I confirm that everything is good, I'm going to try redoing Norton's and I'll try your suggestions, if they don't fix it!!
    Thanks again, and will let you know if this is the fixed!!!

  • Send/Don't Send Error Report

    Everytime I open Safari it comes up with an error.
    It says "Safari Web Browser has encountered a problem and needs to close. We are sorry for the inconvenience." and asks "Send error report" or "Don't Send". If I click either it closes out.
    How do I fix this?

    Try reinstalling Safari. When you do, install to a new folder like C:\Apps\Safari.

  • Itunes get "Send Error Report" message

    Alright so when I try and open itunes I get a send error report message. I've tried updating it and that doesnt work and I've already tried reinstalling it. I thought quicktime was the error so I went to try and remove it from my computer. As it was loading to remove quicktime I got a "fatal error" message and quicktime could not be deleted.
    Help please?
    Message was edited by: Joshua Malin

    Itunes has encountered a problem and needs to close
    the first thing that i check for when people report getting that message when they try to launch their itunes is a broken QuickTime.
    try to open your QuickTime. does it launch properly, or do you get an error message?
    if you get an error message, the first thing we'll try is a careful standalone QT 7.1 reinstall.
    download and save a copy of the QT 7.1 standalone installer to your hard drive. (we'll run the install from there rather than online.) switch off antivirus and antispyware applications prior to the install.
    Quicktime 7.1 Standalone Installer
    if that install goes through okay, does your itunes launch properly again?
    (if you get an error message on the QT standalone reinstall, let us know what it says. include error message numbers if you're getting any.)

  • ITunes Won't Open; Get Option To Send Error Report

    Whenever I try to open iTunes, I get the message, "iTunes has encountered a problem and needs to close. We are sorry for the inconvenience." I have the option to either Debug (which does nothing), Send Error Report, or Don't Send. I have tried restarting my computer, redownloading iTunes, and uninstalling and reinstalling iTunes.
    Backstory: I tried downloading the new iTunes version yesterday, and acidentaly clicked the power strip reset button with my toe right in the middle of download. iTunes disappeared from my computer after I booted it back up. So I downloaded it, and it worked yesterday. I turned on my computer again today, and I get this message.

    Is it possible to download an older version of iTunes to see if that works? If so, where?

  • "Send Error Report" Message When Trying to Open iTunes

    I've looked for two days to find a solution to this problem and tried everything I've come across. Nothing has worked so far, and every time I try to open iTunes I still get the "send error report". I know that that does nothing. I've un-installed and re-installed both Quicktime and iTunes and it doesn't work. I've tried to see if it will work on another account on the same computer but it doesn't work. What is the next step?
    Thanks!

    Good-O. Not seeing an error message there rules out another possible set of problems, so we're still making progress.
    Okay, we'll try swapping out your existing QuickTime one more time, taking a few extra explicit precautions along the way.
    First, download and save a fresh copy of the QuickTimeInstaller.exe to your hard drive. (Don't run the install on line and don't run the install just yet.) Get the installer that doesn't mention iTunes:
    http://www.apple.com/quicktime/download/
    Now head into your "Add or Remove Programs" control panel and uninstall QuickTime.
    Next we'll remove any leftover QuickTime program files and folders.
    Restart the PC.
    Open Local Disk C: or whichever drive your program files are installed on.
    Open the "Program Files" folder.
    Right-click the "QuickTime" folder (if it still exists) and select Delete.
    Go back into Local Disk C: or whichever drive your Operating System files are installed on.
    Open the "Windows" folder.
    Open the "system32" folder.
    Right-click on the QuickTime file (if it still exists) and select "Delete".
    Right-click on the QuickTimeVR file (if it still exists) and select "Delete".
    Empty your Recycle Bin and restart the PC again.
    After the PC restarts, do not open any applications. Disconnect from your network and/or the internet. Now disable all your security software (firewall, antivirus, antispyware).
    Now start the QuickTime install by doubleclicking on the QuickTimeInstaller.exe file you downloaded earlier.
    Reenable all security software prior to reconnecting to the internet and/or your network.
    Did that install seem to go through okay? If so, does QuickTime launch normally this time?
    Message was edited by: b noir

  • Windows prompting send error report or dont send

    when am using labview application windows prompting send error report or dont send can some one help in this..I did all re installation and windows update but no use..

    You will need to provide more details as we cannot see your computer screen. Does this happen every time you launch LabVIEW? What version of LabVIEW are you using? What version of Windows? Does LabVIEW crash? If so, what were you doing at the time it crashed?

  • When i click Yahoo mail, firefox is closing, says send error report or close

    The new Yahoo Mail is updated, so when i open yahoo mail, the browser says " firefox encountered... error . Send error report or close". This is the error window dialogue box appear.
    After that, the complete firebox browser closing, how do i open my yahoo mail.
    GMail and other websites is working fine. The problem with only Yahoo mail.
    Please help.
    My important mail has to be read.

    See:
    *https://support.mozilla.com/kb/Firefox+is+already+running+but+is+not+responding
    *http://kb.mozillazine.org/Profile_in_use

  • "Send error report" popup upon iTunes startup

    When I try to open iTunes 7.0, after a moment of loading, a "send error report" popup comes onto the screen. This is a serious problem because it prevents me from accessing iTunes and updating my iPod. For reference, I am not experiencing any problems with Quicktime. Any suggested courses of action? I have already tried these two methods, as proposed by Apple, and nothing has been fixed.
    Here are some screenshot clips of the error:
    Any help is very much appreciated. Thanks!
      Windows XP  

    Yes, it works in the new account. Thanks so much!
    However, how can I make it work on my main account. Also, any ideas as to the reason it only works on this account?
    the first thing we should check on is damaged itunes preference files in the account in which you're getting the crash. (there's a different set of these in each XP user account, which is how we can get the "crash in one account, launch in another" behavior.)
    try the technique i describe in my reply to kusma in the following post:
    b noir: Re: iTunes 7.0.1 crashing
    (a few other things to check on if this doesn't pan out.)

  • ITunes "Send Error Report" Message/Quicktime Problem

    This is a problem that has only occured after I updated my iTunes to 7.0.2. Some songs in my library, and all of my videos that I have bought through the Music store cause the "Send Error Report" message to come up and iTunes closes down immediately.
    I read another thread that a similar problem was occuring to a customer, and one of the admins requested him to un-install Quicktime and delete 2 files out of the registry. Then re-install quicktime through the "Repair" section of the iTunes installer. I followed these steps and the problem seemed to be fixed, but then they were "re-corrupted" I guess after I restarted my computer.
    Do you have any idea what would be wrong? I know it is not spyware/viruses because I have several programs to check/delete them.
    Thanks for your help
    -jcavanagh.

    Bump for the 3rd time.
    Quicktime will not even open, on a sidenote. It starts to load, then I hear some sort of beep..then it closes. I have tried re-installing multiple times and the problem continues.

  • BI Publisher 11g Trial dont work fine , send ERROR

    Hi.
    I Install BI PUblisher 11G Trial in a new clean server with :
    + Windows 2008 R2 Foundation Spanish with SP 1
    + Download, Install BI Publisher 11g Trial
    + Execute Demo Report "Revenue Budget Actual and Detail "
    + In Inteactive mode work fine
    + In HTML send ERROR : "java.lang.ArrayIndexOutOfBoundsException: 0"
    + In PDF the pivot table don't display any value higer 1.000.000
    This is a bug ?,how correct this errors ?
    Thank you very much
    Carlos

    Hi Carlos,
    Are you still experiencing this problem?
    I do not see this on my installation on Windows7 64 bit running in English.
    I also set the BI Publisher UI language and Report Locale to Spanish and all three output types:
    Interactive, HTML and PDF render correctly.
    When you say that the pivot table doesn't show any values higher than 1.000.000 ... what does it show instead?
    How do the other sample reports look for you?
    Mike
    Edited by: mdonohue on Jun 5, 2012 4:45 PM

  • Dont Send Error at the time of Login

    hi all,
    i am getting Windows Dont Send/send Error at the Login in SQL * PLUS / Forms / Reports, Then If u press dont send SQL*Plus getting closed.....
    can any one pls tell me, how to resolve this...
    Regards,
    Kalyan

    Hi all,
    I am using windows XP service Pack 2. i installed Oracle 9i and connecting successfully. But after that i installed D2K, But i am not able to connect with database.
    Oracle Net8 Easy Config is giving me this error,
    The test did not succeed.
    ORA-03106: fatal two-task communication protocol error
    There may be an error in the fields entered
    or the server may not be ready for a connection.
    You can check the server and retry, or continue.
    But My SQL Plus 8.0 is showing windows Send/Dont send error. when i press dont send it is getting closed.
    Please any one can help?

Maybe you are looking for

  • Ical error message

    What actions should I take when I see this error message: "calendar encountered a critical error while saving to the database, and recent changes may be lost. More information may be available in the console."?

  • Extracting data from a tag of  xml file which is(xml) in a  Field of Csv.

    We have a xlm script which is stored in the clob column of the csv file. we have to extract one value from the <tag> and reject remaining data. Sample:- <ROW> <ID>100</ID> <ORDER_DATE>2000.12.20</ORDER_DATE> <SHIPTO_NAME>Adrian Howard</SHIPTO_NAME> <

  • Windows 8.1 backup

    I'm getting ready to roll out Windows 8.1 to some users.  I've noticed that Backup and Restore has been changed to File History (and System Image is a different tool now). Why can I no longer store backup files on a network share?  It gives no option

  • Unexpected File Format

    I am developing a training course in Flash CS3 and several of my files seem to have become corrupt - when I try to open them I'm getting the 'Unexpected File Format' error message. They are definitely CS3 files. I am making sure I publish swfs before

  • Rmi almost there

    rmi almost there I did a version 1.1 javac -tareget 1.1 ct277/*.class rmic -v1.1 rImp put everything in a jar compiled OK (so the class is seen in the build process) but on execution I got: Exception Details: javax.faces.el.EvaluationException java.l