PO release after printout

HI friends,
My client is taking printouts of PO in me22n before it get released.His requirement is before release of PO he should not be able to take printout.Any body help me please,Urgent.
Thank you

Hi,
In the SAP it is not possible to take the print out of the PO before releasing it. There is one possibility though. In the ME23N go to the print preview. In this menu there is option to print the PO. Ask your ABAPER to activate this screen element. It will allow you to print the PO.Please explain the client the implications of printing the PO before releasing it. Anyone can print the PO and send it to the client without the approval.

Similar Messages

Paper won't release after printing

I don't know if it happened after a techie at HP suggested a different driver to access the e-print functions on my HP Envy printer, but some times the paper won't be released after printing. I have to give it another function, then cancel the function, to get the printout.

Hi
I see.
Have you by chance set the Docked icon to Keep In Dock, found by clicking and holding down on the docked icon?
Furthermore you say the printer icon stays open showing a green arrow, so is that both the printer utility and the printer both showing in the dock?
i think normally, there should only be the printer utility, a green open printer symbol doesn't ring a bell, so to speak.
roam

Memory does not get released after encrypting/ decrypting files.

I am using javax.crypto package to encypt/decrypt files but the problem is that once a big file (around 100- 700 mb) is encrypted there is spike in memory of 70 Mb (first time) and whole of this memory is not released after execution is finished. I have kept my application run for days but this memory do not come down.
Interesting thing is if I encrpyt/ decrypt the same file again and again the memory do not rise by 70 Mb, but for first 3-4 iterations 5-8 Mb of memory is released in each iteration and after that memory starts increasing again in chunk of 2-5 Mb and after few iteration some memory get released but in all the memory always increases. The code to encrypt file is simple
Cipher c = Cipher.getInstance("AES/CBC/PKCS5Padding");
byte[] salt = generateRandomBytes(16);
Rfc2898DeriveBytes rfc = new Rfc2898DeriveBytes("123456", salt, 1000);
SecretKey key = new SecretKeySpec(rfc.getBytes(32), "AES");
c.init(Cipher.ENCRYPT_MODE, key );
FileOutputStream fos = new FileOutputStream(encryptedFile);
CipherOutputStream cos = new CipherOutputStream(fos);
FileInputStream fis = new FileInputStream(largeInputFile);
int len = 0;
byte[] buf = new byte[1024 * 128];
while((len = fis.read(buf)) != -1) {
cos.write(buf, 0, len);
cos.close();
fis.close();
This is simple observation I have seen in my program:
I am using Windows 7 64 bit with 16 GB RAM Intel Core 2 Duo 3.00 GHz and file encrypted was 700 MB size
Explanation
Memory Usage (As shown in Windows Task Manager Private Working Set column)
When program starts
9924 K
After first iteration of encryption
81,180 K
Second Iteration
78,254 K
3 Iteration
74,614 K
4 Iteration
69,523 K
5 Iteration
72,256 K
6 Iteration
70,152 K
7 Iteration
83,327 K
8 Iteration
85,613 K
9 Iteration
95,124 K
10 Iteration
92,698 K
11 Iteration
94,670 K
I kept the iteration on for 2000 iteration, the same pattern was observed and at the end memory usage 184,951 K, this memory was not released after calling System.gc() also.
What could be the possible problem, is it the CipherOutputStream or Cipher class having some memory leak or I am doing something wrong here?

ash wrote:
We are using WebLogic Server 7.0 runing on Solaris 2.7.
We are experiencing a problem where the memory does not seem to be released after
the application has been shut down.What do you mean by "application has been shut down"? Is the server
process running or not? Is it a zombie?
The
Unix 'top' command reports that memory has not been reclaimed by the O/S. What exactly has it reported? If the process is gone, then I'm pretty
sure your O/S has reclaimed the memory. What exactly are you looking at
in top?
-- Rob
> Continue
restarting it will forces us to reboot the server as there will be more and more
memory lost when restarting the WebLogic.
Advice to fix the problem is much appreciated. Thanks.

HT3702 I have paid once for one month subscription for al jazeera sport live app. I just released after few months that they are automatically charging me on monthly bases. How i can stop them charging me for something i did not use and i did not authoriz

I have paid once for one month subscription for al jazeera sport live app. I just released after few months that they are automatically charging me on monthly bases. How i can stop them charging me for something i did not use and i did not authorize?

You possibly set up an auto-renewing subscription with the app - there are instructions on this page on how to manage them, including how to stop them : http://support.apple.com/kb/HT4098

Secondary mouse button automatically releases after 3 sec

*Secondary mouse button automatically releases after 3 sec even if still pressed* since upgrade to snow leopard. I have to use extra switches attached via USB being unable to move my arms.
Apart from that Airport works after adding Location, I am still not able to access internet or mail, skype and time machine backups work. Switching to my neighbours unsecured WLAN I have no problems accessing mail and internet.
A guest with a PC was also unable to use my WLAN, he was able to connect (gave him password) but could not use internet.
Any ideas? The "secondary mouse button automatically releases after 3 sec" issue seems not to be posted yet.

Hi @devitojj
Welcome to the HP Forums!
I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that when you power off your notebook it automatically restarts in 4 seconds.
You have tried several steps to try and resolve this but there is no change.
As it repeated the behavior with the hard drive removed, you know it is not an issue with Windows.
You have tried updating the bios and returning it to bios defaults but no change.
Here is a link from answers.microsoft.com that helped other people with this issue.
Windows 7 computer restarts automatically after shutdown
This does suggest you edit your registry which does have the potential to cause issues, so be very careful. I would also suggest backing up your registry before you attempt it, just in case.
Back up the registry from Windows.microsoft.com
If that has not helped, I would try removing the Cmos or RTC battery for 30 seconds and then replacing it.
Please let me know if this helped.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

When will the File menuitem on OS X be released after having opened and cancelled out of the Import window with Fx 4 beta 12?

This [http://img638.imageshack.us/img638/4186/screenshot20110226at124.png (Image)File menuitem not released after closing Import window.]
It has been there since early Firefox 4 betas. With 3.6 and 3.5 of Firefox it happened with the Tools and Bookmarks menuitem, also on Leopard and Snow Leopard the same way like the screenshot above. It happens more often that I would like. I'm not in the File menu at all and yet it's highlighted. I've closed the Firefox window and reopened a new window but the File menu remains active until I actively press it again or any other menu in the Firefox 4 menubar.
You can try it by choosing the File menu -> Import and then simply close the Import window and return to Firefox 4 for a browsing session. Does the File menuitem remain active? Happens each time now that I figured out the correct trigger that I mentioned with the Import window.

Hi Rick & Todd
thanks for testing & responding
@ Rick - ProRes cannot be fixed with color management. At all. It is a problem that adobe has setting a correct quicktime gamma flag.
I am color-tight if re-importing encoded file back in to AE or any other adobe app. When exporting to PR or Quicktime in General, something is going terribly wrong.
@ Todd - This whole thing did not leave me alone and I have figured out what the problem is (aside from the Quicktime issue)
If AE's Audio Hardware Preferences is set to anything else than built-in audio this problem occurs. Setting it to Built-in Audio all the issues are remedied.
@ Todd - I have Crash Reporter Enabled.. but AE never crashes ;-)
@ Todd - I spent the better half of this year beta testing PT 11 for AVID along with another dedicated set of folks... The reason we test so long prior to release is to get rid of all the small issues that should never surface in a commercial software. Of Course you cannot get all of them but such as testing the audio hardware capabilites of AE prior to a major release should have been cought by the beta crew.. If any.
The quicktime issues are long standing - how about opening contact with Apple ( you are a developer and entitled to Apple Support) and tell them about the problem. And have them help you.
I mean, you offer Speedgrade which is a fantastic app, PPRO, AE & PS (All great) but what good is greatness if neihter is able to deliver. The quicktime file is being displayed with a .8955 gamma offset (What one would have to offset the quicktime file by) when viewed in any other app than adobe's That is a lot.

Upcoming releases after forms 9i

Can anyone give me more info on any upcoming releases
after forms 9i?
What are new features that will be implemented?
What is the timeframe (a month, a year, several years)?
Are any statements of direction available to the public on this?
Thx

Kevin,
Forms9i will have new features in one of the upcoming patch sets,
like we did for Forms6i.
In client/server customers have been very reluctant in patching
their Forms client installation if not necessary. This was
because of the time consuming task shaking hands with each single
PC.
Now that our software runs on the server only we are planning to
add new features in one of the upcoming patch sets of Forms9i,
all of them not requiring a Forms application to recompile.
Features that get added first are focussing on performance and
security. Your application will benefit from this enhancements
without knowing and all that may be required is parameter to be
set in the Forms configuration file.
If there are enhancements that can be used within the application code
then we doc this in the release notes and or an accompanying Whitepaper
published on OTN.
Like Robin said, we are not in a hurry with a new major release
because we have a vehicle to add new features. After Forms9i, as we see
it, there still is Forms9i. There will be a next major release, no doubt
about it, but we don't know a release date.
Hope this explains why we don't have a list of new features ready to go
into the next major release. Of course we have tons of ideas, but these
are not approved and we don't wanna send fiction to this list.
regards
Frank
Ps.: So far I am hopig that you like what you get in Forms9i.

Which is the Latest version to be released after SAP MDM 7.1 version ?

Can any body give me the details about the latest version to be released after SAP MDM 7.1?
Thanks & Regards,
Krishna ..

Hi Krishna,
as far as i know MDM 7.1 general versions for user is still about to come.
but With SAP NetWeaver Master Data Management 7.1, SAP has enhanced the MDM technology foundation to build pre-packaged business scenarios and integration. This SAP NetWeaver MDM release has been in ramp-up shipment since the end of November 2008.
But for 7.1 some highlights are
Extended flexibility for data modeling and support for complex objects
Higher performance and improved inbound and outbound processing e.g. through native MDM adapter for SAP NetWeaver Process Integration
Enhanced integration into SAP NetWeaver standard administration and life-cycle components
after successful Operation with this I guess new release will mess up.
Hope it helps.
Rgds
Deepak

Po change after release and printout

Dear Experts,
My client require if we change the PO in any field ( expect qty and amount ) our po should be go in the po release again we using release indicator 4 and 6 but we want release should be go if we change any field like date tax code text payment terms etc.
RCR

Hi,
System determines new release strategy only if there are any changes in the characteristic values in the PO. (The characteristics that you must have defined for the PO release strategy configured in your case, like PO value, document type, Plant, etc.)
By your question, it appears that you do not want to change even the date and text fields after PO is released, and in case you do the changes, then again the PO has to be released.
For this, you need to use the release indicator, which won't allow any changes after PO is final released. Hence, when any of the field is required to be changed, the release will be required to be cancelled first, then the changes can be done. After doing the necessary changes in your fields, like, date, text, etc., PO will again be subjected to release, and will have to be released again to proceed further.
Regards,
Zafar.

Space is not released after truncating the table

Team,
We have a table of size 550gigs in size and we truncated the table , truncated sucessfully but space is not released in os level, what action we can take to release the space and this table has only one row and contains the binary data.
Thanks
PGR

Team,
We have a table of size 550gigs in size and we truncated the table , truncated sucessfully but space is not released in os level, what action we can take to release the space and this table has only one row and contains the binary data.
Thanks
PGR
Hello,
Yes space wont be released immediately .If large extents are in picture which I assume is your case it goes into deferred drop a background process which will execute after some time( time may vary).See below link for details.
As per BOL if extents are more than 128 it goes in deferred drop.
http://msdn.microsoft.com/en-us/library/ms177495.aspx
You should wait for some time .keep checking the free space
Below discussion will surely help you in understanding.See Jonathan's reply
http://social.msdn.microsoft.com/Forums/en-US/4aa2537e-246b-4bfe-818d-3482531d9149/sql-server-2005-massive-400gb-table-dropped-space-not-released
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Cancellation of PR release after RFQ

We are able to cancel the release via ME54N after RFQ, but getting error while attempting to do the same via BAPI_REQUISITION_RESET_RELEASE. I was checking to see if there is any OSS note for this, but I could not find anything on this subject.
I had seen that ME54 has the similar behaviour.. Does it mean we should not use BAPI_REQUISITION_RESET_RELEASE for cancel ling the release?

OSS Note 686022 - ME54N: error messages ME109 and ME110 not processed.
explains:
ME54N allows the user to unrelease a purchase requisition linked to a purchase order or a request for quotation. This is correct behaviour and constitutes a new design.
so the question left is: is the BAPI older than this new design?
I guess yes.
this BAPI calls Funtion module ME_RESET_RELEASE, and there SAP checks if the new release indicator allows RFQ creation. if not, then error ME109 is raised.

Automatic credit release after payment done

Hey Experts
My client wants to automatically release the credit block after posting customer payment. Thus, the user does not need to manually go to VKM1/VKM3 t code and release the order. Is this possible in standardr SAP? or do I need help from an abaper ?
thanks in advance

Hi,
As per Credit Setting if the Payment received from the Customer updated in SAP system the credit exposure gets tallied and resets itself in FD33 transaction.
But for already blocked sales orders either you need to release it in VKM3 or run the report
RVKRED07
This RVKRED07 you can run it for a single customer with selected settings.
This RVKRED07 updates the S066 and S067 info structure pertaining to Credit limit.
But as per my knowledge it will not suffice for already blocked Sales Orders. Kindly do check and confirm.
Regards,
SRK

PO Release (Revoke PO Release after GR done )

Scenario : PO is released. GR is done and delivery is completed.
Even after the GR being completely done, the release of the PO can be revoked !
What is the business logic behind this? Once the GR is done completely with the tick Delivery completed indicator, SAP must not allow anyone to revoke the release of the PO.
Can anyone give me a business scenario where it is required to revoke the release of the PO after the complete GR is done.
Thanks..

Hi,
Scenario-1:
1. Vendor sends the material with complete qunatity (=PO quantity) and GR is done for that -
1st shipment
2. Vendor sends material more qantity than ordered qunatity under the same PO number and business accepts that quntity, then the PO has to be modified to receive the extra qunatity.
To do the modifications in the PO the release strategy has to be revoked.
Such scenarios exists when business reuires the material continuosly and the material is to be in the stock.
Scenario-2:
Vendor is a manufacturer and is continuosly supplying the material as soon as he manufactures a consignment.
In such cases also the above scenario is applicable if business is not willing to maintain a contract with the vendor (may be because contract is a legal document).
Scenario-3:
If vendor delivers the material on the date which is different than the PO delivery date and it is required for further reporting that the PO should have correct delivery date then the PO madifications are reuired.In this case also PO release strategy has to be revoked.
It means there can be N number of scenarios where PO modification is required ( but the modification should be controled) after GR is done and hence PO release revoke is required.
Cheers,
Satish Purandare

Purcahse document cannot be released after PO reject using ME29N

Hi gurus/experts,
is it SAP standard behaviour that once PO was rejected using ME9N, the PO document cannot be release anymore ?
if that is tha case, how can an approval reject the approval so that the release status can go back to previous release code ?
TQ

Hi,
It is possible to go back into ME29N and cancel the rejection, then the purchase order is available for approval again. The reject icon will change to a reverse rejection button after the rejection is done..
Normal process is after rejection the buyer will cancel the rejection, make any necessary changes and save. This will return the purchase order for approval. The buyers changes may reset the entire approval process if they exceed the conditions configured for resetting the approvals.
James

How to ensure locks on objects are released after one transaction

Hi,
While a program is performing successive operations over the same object, there can be a scenario that after the first operation is completed it may still have a lock over the object. This would result that the object is not available for locking to proceed with the second operation. Hence, the entire record processing would end up in errors. So how we can ensure that after the first operation the locks are released ?
Regards,
Ratheesh

Hi Bhaskaran,
Please note the Implicit locks set by the system will be deleted whenever the system finds a commit or rollback actions either implicitly or explicitly.
implicit release of locks takes place whenever there is a CALL SCREEN, LEAVE TO SCREEN,
SUBMIT PROGRAM, LEAVE TO TRANSACTION, CALL FUNCTION etc.
for more info Please go through the SAP LUW concept
Regards
Ramchander Rao.K

PO release after printout

Similar Messages

Maybe you are looking for