PO Release cancel after GR/IV

Dear Experts ,
We have release strategy in PO .
We observe that the release can be canceled at any stage that is even if the GR is done or Invoice is parked/posted .
I want to avoid revoking of release once the GR/ IV has been done .
Please tell me how can this be achieved ?
Regards
Anis

Hello ,
Based upon the release indicator, you can make the purchase order totally in to display mode. So no changes will be possible after final release.
How can this be done ?
Anis

Similar Messages

  • Cannot cancel release stratigy after output is printed

    Dear Expert,
    I has been configuration output for PO ( print auto after release stratigy)
    After I release stratigy there is a scenario that user need to cancel release stratigy
    But the system is error not allow to cancel release stratigy after output is printed
    What's I miss? thank you very much.
    I release stratigy using ME29N and cancel using ME29N and ME28 also.
    Best regards,
    @tom _

    HI,
    In ME9F itself try to repeat the output.
    Thanks & Regards,
    Kiran

  • Internal Order Release/Cancel Release/...

    Dear All,
    I have several questions regarding Internal Order (Order type - 0401) release/cancel release options.
    In order to make IO "usable" After creation I select Release option and then assign the budget to the order. When the order is no longer needed I choose Cancel release so the order can be no longer used.
    So I am interested in:
    1) I have lots of orders which must be cancelled, is there any trasnaction for Batch canceling or releasing the orders?
    2) Does canceling the order affect for example expenses posted on this order? I mean expenses posted on this order dissapear or stay as it is?
    3) what is the difference between Cancel release and Technically completed.
    Thank you in advance.

    Hi,
    Yes CLOSE is the right option for finishing the order. As per my understanding there is no option in standard system to mass cancel/release an order.

  • Workflow call for Single Step Release Cancellation in PO

    Dear All,
    I want to start warkflow for "Single Step Release Cancellation" of PO at header level (not for Rejection button), but there is no event available for this in BUS2012. How can I perform this? Is there any enhancement that is called after record updation in database (after post)?
    Regards
    Nadeem

    Hi,
    In CDHDR Table while you performing the Transaction are you getting an Entry.
    If you got it you have to configure in SWEC.
    Check this [link|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80ddeba4-e780-2b10-7bb2-fc7a33efabbd].
    Regards,
    Surjith

  • Fax from computer to photosmart 7525 gets cancelled after spooling

    I can fax directly from printer, but when I use the HP software or print function on the computer to set up fax and send, the progress goes from spooling to cancelled without any error notices. I have a Dell XPS 8500 running 8.1 and Photosmart 7525 connected by USB and wirelessly. They communicate just fine with the scan and print functions. Both are current on updates using the check for updates utility. I have a dedicated Voip phone line from Comcast and ther most current modem that I have slowed through the fax settings. I've spent hours reading forums on HP and Microsoft searching for exactly this issue. Please help

    Hi @xskilledtrades
    The truth is, I don't know what is causing the fax from computer function to fail. I understand from your description that the fax is cancelling after spooling, but that you can print and scan just fine as well as fax directly from the printer. I suspect the issue has something to do with the driver, thus I suggest we remove the driver and reload it.
    Please use the following steps to delete the printer/fax from device and printers, and the driver from the server properties.
    1. In the ‘Devices and Printers’ folder
    2. Choose ‘Print server properties’.
    Win XP – With no printer selected, click ‘File’ then ‘Server Properties’.
    Windows Vista – With no printer selected, press ‘Alt’ then click ‘File’ then ‘Server Properties’.
    Windows 7/8 and 8.1 – Select any printer in the ‘Devices and Printers’ folder and click ‘Print Server properties’ above.
    3. Click on the ‘Drivers’ tab at the top of ‘Print server properties’ window
    4. Choose the printer you want to uninstall and click ‘Remove’
    5. Choose 'Remove driver only'
    6. The next screen will give a warning, letting you know that deleting the driver package will remove it from the system. Click ‘Yes’ to say that you are sure you want to do this.
    If documents are stuck in the print spooler, you may see an error, cancel any documents pending in the print queue, or try restarting the print spooler, then try to remove the driver from ‘Print server properties’ again. If it still won’t remove the package, restarting the computer and the printer should resolve this ‘in use’ error and allow the driver to be removed.
    If the you continue to get an 'in use' message follow the steps in the document here; The Specified Printer Driver is Currently in Use
    After the driver is removed, open Start > All Programs > HP folder > Printer folder > HP Setup and Software (or the printer icon).
    The Setup and software screen will open and you can click on Connect a new printer.
    Thanks, I look forward to hearing back from you.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Job cancelled after system exception ERROR_MESSAGE

    Hello all
    I am facing the following issue.
    A custom report is schedulled and run as backround job. The report should create a txt file on server.
    The report works fine in foreground, but as backround job ends up cancelled all the time.
    The job log:
    Job log overview for job:    VI5 / 13072800
    Date       Time     Message text                                                                     Message class Message no. Message type
    27.03.2009 13:09:28 Job started                                                                           00           516          S
    27.03.2009 13:09:28 Step 001 started (program ZESSRIN110R, variant PR1_0000381, user ID METAPARTNER)      00           550          S
    27.03.2009 13:09:28 File creation ERROR:                                                                  00           001          E
    27.03.2009 13:09:28 Job cancelled after system exception ERROR_MESSAGE                                    00           564          A
    There is no info in SM21 regarding the error.
    Can anybody help with this?
    Thanx in advance.
    imi
    Edited by: Imrich Vegh on Mar 27, 2009 2:27 PM

    btw the part of my code  looks like this:
    server path check
        IF p_srv IS NOT INITIAL.
          OPEN DATASET gv_server FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
          IF sy-subrc EQ 0.     --- I keep receiving 8 here in BACKGROUND JOB
            WRITE : / text-077,  gv_server.
          ELSE.
            MESSAGE text-069 TYPE 'E'.
          ENDIF.

  • Job cancelled after system exception ERROR_MESSAGE in DB13

    Hello All,
    When i opened the t-code DB13 i saw that this job "Mark tables requiring statistics update" is cancelled.
    JOB LOG:
    12.02.2011  22:00:16  Job started
    12.02.2011  22:00:16  Step 001 started (program RSDBAJOB, variant &0000000000085, user ID 80000415)
    12.02.2011  22:00:18  Job finished
    12.02.2011  22:00:18  Job started
    12.02.2011  22:00:18  Step 001 started (program RSADAUP2, variant &0000000000081, user ID 80000415)
    12.02.2011  22:01:26  Error when performing the action
    12.02.2011  22:01:26  Job cancelled after system exception ERROR_MESSAGE
    When check for the BGD Job in SM37 for this job i found the same error in the job log with the status cancelled.
    Job log overview for job:    DBA!PREPUPDSTAT_____@220000/6007 / 22001700
    12.02.2011 22:00:18 Job started
    12.02.2011 22:00:18 Step 001 started (program RSADAUP2, variant &0000000000081, user ID 80000415)
    12.02.2011 22:01:26 Error when performing the action
    12.02.2011 22:01:26 Job cancelled after system exception ERROR_MESSAGE
    I couldn't find any logs in SM21 of that time also no dumps in ST22.
    Possible reason for this error:
    I have scheduled the job Check database structure (only tables) at some other time and deleted the earlier job which was scheduled during the bussiness hours which caused performance problem.
    So to avoid performance issue i scheduled this job in the mid night by cancelling the old job which was scheduled during the bussiness hours.
    And from the next day i could see this error in DB13.
    Rest all the backups are running fine but the only job getting cancelled is for "Mark tables requiring statistics update"
    Could anyone tell me what should i do to get rid of this error?
    Can i schedule this "Mark tables requiring statistics update" again by deleting the old one?
    Thanks.
    Regards.
    Mudassir Imtiaz

    Hello Adrian,
    Thanks for your response.
    Every alternate day we used to have performance issue at 19:00hrs.
    Then when i checked what is causing this problem, i discovered that there was a backup "Check Database Structure (tables only)" scheduled at this time and it was mentioned that this backup may cause performance issue.
    Then i changed "Check Database Structure (tables only)" the time of this backup to 03:00hrs.
    The next day when i checked DB13 i found that one of the backups failed.
    i.e. "Mark Tables Requiring Statistics Update"
    Then i checked the log which i posted earlier with the error: "Job cancelled after system exception ERROR_MESSAGE"
    I posted this error here and then i tried to delete the jobs scheduled i.e. "Mark Tables Requiring Statistics Update" and then re-schedule it at the same time and interval.
    And then it started working fine.
    So i just got curious to know the cause of the failure of that job.
    Thanks.
    Regards,
    Mudassir.Imtiaz
    P.S There is one more thing which i would like to say which is not related to the above issue, and m sorry to discuss this in this thread.
    I found a few Bottlenecks in ST04 with Medium and High priority.
    Medium: Selects and fetches selectivity 0.53%: 122569 selects and fetches, 413376906 rows read, 2194738 rows qualified.
    High: 108771 primary key range accesses, selectivity 0.19%: 402696322 rows read, 763935 rows qualified.
    There are a lot these.
    I would really appreciate if you tell me what is the cause for these Bottlenecks and how to resolve.
    Thanks a lot.

  • Billing document should not be cancelled after creating return sales order

    Hi All,
    Billing document should not be cancelled after creating return sales order with reference to billing document. Please suggest configuration settings on the same.
    Sudheer.

    Hi,
    In SAP, when the sub-sequent document is existing , we can not cancel the preceeding document. Therefore if you want to cancel the billing document you need to calcel the documents which are created with reference to that.
    Check and confirm.
    Regards,
    Ravi Duggirala

  • How to find the ME29N 'USER EXIT' when our save the release PO after.

    How to find the ME29N 'USER EXIT' when our save the release PO after.
    which user exit will be used?
    thanks.
    alex.

    Hi,
      process :
        go to tranx code :   ME29N ,
           System---->Status , here copy the program name (SAPLMEGUI),
         go to abap editor and specify the program name SAPLMEGUI and find the package "ME".
         tranx code : CMOD ,  Utilites--->Sap Enanchement,
                                         specify the package name : ME
                                          and execute, displays a list of exits ,
                                 and find out our suitable exit based on requirement.
    check these :   EXIT_SAPMM06E_021
    reg
    Siva

  • Error when executing APD-Job cancelled after system exception ERROR_MESSAGE

    Hi,
    We have a process chain which executes a APD using an ABAP program RSAN_PROCESS_EXECUTE.
    It was executing successfully until few days back but now a days frequently once in 3 days roughly it is getting cancelled during execution of ABAP Program with the message 'Job cancelled after system exception ERROR_MESSAGE'
    checked st22 and sm21 but didn't get any clue.But if we execute the same process chain manually(Immediate load) it is working fine all the times.
    What may be the reason for the cancellation of the chain sometimes and the same chain working fine some other time and working very much fine when ran manually.
    Regards,
    Vishnu

    Hi Vishnu,
    Can you check if there are any other process which is triggering the abap program RSAN_PROCESS_EXECUTE at the same time as the execution of this process in the chain.  You can check in which other chains this process is being used.  You can compare the time when this failed in the chain you mentioned with the same being run in other chains at the same time.
    Sasi

  • Table space and recollection of released space after client deletion

    Dear All,
    I have two questions:
    1.Can any1 tell me how to determine the fastest growing table and how to reorganize table space.
    2. Is there any way by which we can recollect the space released:say after client deletion. I had deleted one client two  weeks back and when I saw the SAP/user drive I fow free space available remains the same.
    I searched but found no relevant clue.
    regards,
    Ashutosh

    1.- You can see the largest table report in ST04 (as far as i remember)...
    2.- You can reorganize your db using brtools - brspace...
    Read,
    http://help.sap.com/saphelp_erp2004/helpdata/en/32/0d0c888839164ba4245b3ff7969c59/frameset.htm
    Regards
    Juan

  • GR cancellation after posting Invoice

    Hi,
    How can I block GR cancellations after posting MIRO Invoice for non-GR based IV purchase orders. 
    regards,
    Mallik

    u have the option in customization under goods recipt.
    pl chck the same transaction code
    ombz

  • Reg:job cancelled after system exception ERROR_MESSAGE

    Hi All,
    Process chain has failed in aggregate step with message "job cancelled after system exception ERROR_MESSAGE"
    But i manaully done the aggregate step.
    But i would like to know the reason for the above message.
    Can any one tell me this?
    Thanks
    SS

    Hi,
    In the job log of aggregate step in the above line of the message "job cancelled after system exception ERROR_MESSAGE" you will probably find the exact error message.
    In the job log it will first display the exact error message and then the message "job cancelled after system exception ERROR_MESSAGE" will appear, Please check it once.

  • Job cancelled after system exception ERROR_MESSAGE - Why ?

    Hi to all,
    Anyone knows why, when I execute a program in foreground, everything is ok . When I try to execute it in background (schedulated in a job ) I obtain "Job cancelled after system exception ERROR_MESSAGE
    Message no. 00564" 
    I have a check in 'at selection-screen event' to control "no data output" with an custom error message.
    I really don't understand why job is cancelled !
    Any ideas ?
    Thanks in advance .

    Hi,
           Write your message after start-of-selection.
           Instead of putting an error message you can write the message while executing the program in background.
            after select .......
            if sy-subrc <> 0.
              if sy-batch = 'X'.
                write :/ 'No data found'.
             else.
               message e000 with 'No data found'.
            endif.
         endif.
    Regards,
    Srini.

  • I recently purchased a Macbook Pro and when connecting my iPhone 5 to the Macbook's Messages app, I clicked cancel after seeing the 6 digit code. I thought I could easily get that code back to my phone, but can't figure it out at all. Any help?

    I recently purchased a Macbook Pro and when connecting my iPhone 5 to the Macbook's Messages app, I clicked cancel after seeing the 6 digit code. I thought I could easily get that code back to my phone, but can't figure it out at all. Any help?

    Hello Unconscious2015,
    Thanks for using Apple Support Communities.
    If you are trying to configure your Mac to use SMS continuity with your iPhone, then please follow the directions below to configure SMS Continuity.
    To use Continuity for SMS and MMS with your iPhone and your Mac, iPad or iPod touch
    Your iPhone, iPad, and iPod touch need to use iOS 8.1, and your Mac needs to use OS X Yosemite.
    Sign in to iMessage on your iPhone, your other iOS devices, and your Mac using the same Apple ID.
    On your iPhone:
    Go to Settings > Messages > Send & Receive > You Can Be Reached By, and add a check to both your phone number and email address.
    Go to Messages > Text Message Forwarding, and enable the device(s) you would like to forward messages to.
    Your Mac, iPad, or iPod touch will display a code. Enter this code on your iPhone to verify the SMS feature.
    Connect your iPhone, iPad, iPod touch, and Mac using Continuity - Apple Support
    Take care,
    Alex H.

Maybe you are looking for