PO release change in release code

Hi Gurus,
Earlier a PO was being released by code A1. This employee has left the company so all the release of POs have been held up. So i want to change it & assign it to a different code B2 , please guide.
Regards,
Kumar

Hi,
Try to minimize headache. There may be so many factors/characters involves and you need to study the system 1st and then see the other implications too change or NOT.
Example:
You may have release groups, release codes and respective values to be released are following
Release Group A
Release Code: A5u2026 more then 2000K
Release Code: A4u2026.750K to 2000K
Release Code: A3u2026.250K to 750K
Release Code: A2u2026.50K to 250K
Release Code: A1u2026.0 to 50K
Release Group B
Release Code: B5u2026 more then 2000K
Release Code: B4u2026.750K to 2000K
Release Code: B3u2026.250K to 750K
Release Code: B2u2026.50K to 250K
Release Code: B1u2026.0 to 50K
u2026 see example A & B are may be different department. If user get B2 release code instead of A1 ,he can release greater value etcu2026u2026u2026
Regards,
Biju K

Similar Messages

Po change after release and printout

Dear Experts,
My client require if we change the PO in any field ( expect qty and amount ) our po should be go in the po release again we using release indicator 4 and 6 but we want release should be go if we change any field like date tax code text payment terms etc.
RCR

Hi,
System determines new release strategy only if there are any changes in the characteristic values in the PO. (The characteristics that you must have defined for the PO release strategy configured in your case, like PO value, document type, Plant, etc.)
By your question, it appears that you do not want to change even the date and text fields after PO is released, and in case you do the changes, then again the PO has to be released.
For this, you need to use the release indicator, which won't allow any changes after PO is final released. Hence, when any of the field is required to be changed, the release will be required to be cancelled first, then the changes can be done. After doing the necessary changes in your fields, like, date, text, etc., PO will again be subjected to release, and will have to be released again to proceed further.
Regards,
Zafar.

STMS change request release problem

Hi
I am not able to release change requests, sab task able to release, but problem in main request, when I press , release directly, on the bottom it shows u2026tp successfully connected / check writeability of buffers finished with return cod 0. Then screen hangs u2026 manually I have to stop the transition.
I have configured STMS 4,5 times but same problem, in SM59 all retaliated RFCs working fine.
Our System is ERP 6.0, HPUX with DB2
Kindly give me a solution.
But in Tcode STMS >>Monitor>>TMS Alerts>>TMS Alert viewer showers following error:
Date       Time       User           Function      Message                                            System   Clt
23.05.10   17:29:07   TMSADM         TMS_TS_GET_TRLIST    NO_LOG                SID      000
23.05.10   16:58:25   TMSADM         TMS_PS_READ_PROFILE_FROM_DISK                               READ_PROFILE_FAILED                                            SID      000
23.05.10   16:57:30   TMSADM         TMS_PS_READ_PROFILE_FROM_DISK                                 READ_PROFILE_FAILED                                            SID      000
23.05.10   15:55:59   TMSADM         TMS_TP_MAINTAIN_BUFFER                                        RFC_SYSTEM_FAILURE                                             SID      200
23.05.10   15:05:36   TMSADM         TMS_TS_GET_TRLIST                                             NO_LOG                                                         SID     000
23.05.10   15:01:29   TMSADM         TMS_TS_GET_TRLIST                                             NO_LOG                                                         SID     000
23.05.10   14:53:00   TMSADM         TMS_TS_GET_TRLIST                                             NO_LOG                                                         SID    000
23.05.10   14:51:38   TMSADM         TMS_TS_GET_TRLIST                                             NO_LOG                                                         SID      000
Regards
Sunny

Hi Sunny,
Its hard to tell what might be the problem.
I would recommend that you:
- update kernel to the latest patch level for your release
- update your transport tools, tp and R3trans to the latest available for your release
- go into STMS - system pverview and do the 3 checks: Connection test, transport directory, transport tool
check if they all pass.
- try to release a transport and then if it still freezes after all of the above, stop it and check the system log, trans.log, the latest logs in usr/sap/trans/tmp and usr/sap/trans/log to see what was the action it was doing before it froze. That will give a clue as to where the issue may be.
regards,
Paul

Log for Release changes in PO

Hi All,
From which table i can get details of approval log for release stratergy in PO.
My requirement is that i want to know release changes history in Po From where i can get these details.

Refer table EKKO or Check audit log using t.code AUT10 for ME29N.

Error message needs to be generated in case of change in released PO.

Hi all,
please help me how to solve this issue
<b>issue1:</b>
Error message needs to be generated in case of change in released PO.
1) change in incoterms,
2) payment terms,
3) quantity
4) rate.
The system should allow for change on the higher side.

Hi ,
I think you point no 3 & 4 can be solved using option available in release startegy and for point 1 & 2 u have to try with some user_exits. I think so , others can comment on this .
Thanks
Dipak

Rfbila00 operating income wrong after release change

Hello,
We are getting ready for a release change from SAP 4.6c to ERP 6.0.
After a test upgrade we compared the numbers in the report rfbila00 (Balance Sheet/Profit and Loss) before and after the release change. Hereby we discovered a huge difference in the line Operating Income. All other line items are ok. Only the line Operating Income is off. So we assume that it is not a data issue, but some wrong / missing setting in SAP.
All settings of the report are identical and also the setting of how the Operating Income gets calculated.
Has anyone an idea what the reason might be?
Thanks,
Roman

have a look into directory
\usr\sap\trans\tmp
and additionaly to the latest
\usr\sap\trans\log\SLOG*
file.
specially the 2nd file should normaly tell you more.
regards
Peter

Restrict to change the released document

hii all,
i am seeking for a suggestion whether its avalable in standard sap or not.
i want to restrict to change the released document. once,document has released, then chage shud not affect.
thanks.

Hi,
For this you only need to set the changeablity from the release indicator to "1".
Best Regards,
Arminda Jack

Po header change after release

Dear All
We require list of PO for last one month PO header or tiem level text has been changed after release
Regards
Dishant

Hi,
You can use the following report to get you all the changes in PO. Ask your ABAP person to run it for you.
http://www.sap-img.com/mm001.htm
It is an ABAP program contributed by one of the SAP members, which reports all the changes made in PO and list out the details per document.
Hope it helps,
Best regards
Amit Bakshi

Purchase order changes after release

Hi,
How can I block a purchase order to any changes after release it and then, in case of need, mark for deletion the purchase order itens?
Regards,
Maria

Hi,
To block any changes in the purchase order to after release, set Changeability indicator as 1 for Release ID "R" in following path & save.:
SPRO ->MM - Purchasing -> PO -> Rlease Procedure for PO -> Define Release for PO -> Release Indicator
NOTE:If you set Changeability indicator as 3, PO can be changed after release and trigger a new release strategy based on value changes.
Regards,
Biju K

How can Change PO Release Indicator to Released Status

Hi Gurus,
We are having an issue here, which user accidentally re-triggered customized program to re-trigger the release strategy of old PO documents.
This program basically reset the PO release startegy status and update the PO with the latest PO release strategy configuration. It's using FM ME_REL_STRATEGIE_EKKO.
So, currently some of the old PO which previously been fully released and closed PO (with GR & IR completed). So, we dont think that it's right for these old PO to be approved again, also the relevant approvers also refused to do so.
Is there any way that we can use the same FM to change the release indicator to R from S? Appreciate your help. Thanks!
Regards,
Michelle

may i suggest you accidently trigger the program to close the release strategy for all POs by modify class characteristics.
and then reopen the release strategy for necessary POs.
or maybe, you can trigger the program to close the release strategy for old POs.
please see below for details:
How to turn off Release strategy
Edited by: JiQing Zhao on Jun 14, 2011 1:19 PM

PO status if you change the release strategy procedure

What will happen to the half released PO/PRS if we change the release strategy?

Hi,
It won't Happen for Half release PO Document. The rerelase will get affect once the final release done or No release initiated to the document.
SAM

Changes in Released po

Hi,
I made one PO. Got it released and after that i was able to change the rates in PO, which shouldnt have actually happened.
For further changes i should have revoked the release and did the changes.....
What is wrong with my release startegy?
Regards,
Satyendra

Dear Sat,
In the release indicator that u used in the release strategy, maintain the changeable value = "1", so no change can be made after release using the release indicator, and need to revoke the release first to able the change, please check.
Regards,
w1n

Detail changes for release creation on schedule aggreements

Hi Experts,
Landscape:
-we have a standard ERP 6.0 system with an external EDI converter
-IDoc data exchange via RFC connection
-IDoc SAP standard (without modifications or add ons): message type: DELINS, basic type: DELFOR01
If we create a release on a schedule aggrement, all schedule lines in forecast comes out as expected.
When we delete some schedule lines, these lines exported to IDoc with quantity 0 and have an aggregation per week. So we have the following structure in IDoc:
E1EDK09 (head data)
|-E1EDP10 (pos data)
      |-E1EDP16 (schedule line): aggregation per week (IDoc field PRGRS = W), quantity 0
      |-E1EDP16 (schedule line): aggregation per day (IDoc field PRGRS = ' '), quantity 10
      |-E1EDP16 (schedule line): aggregation per week (IDoc field PRGRS = W), quantity 200
      |-E1EDP16 (schedule line): aggregation per week (IDoc field PRGRS = W), quantity 200
      |-E1EDP16 (schedule line): aggregation per month (IDoc field PRGRS = M), quantity 9000
So far so good. This looks fine.
But our standard EDI converter expect the IDoc data starting with days, weeks, months aggregation. If the first schedule line with aggregation weeks are send, the converter expect all other schedule lines with aggregation per week or per month.
It is possible to change the release creation in the IDoc without coding in User-Exits, just with customizing?
regards,
Steffen
Edited by: Steffen Froehlich on May 3, 2010 1:31 PM (accidentally clicked on Post than Save button)

Hi,
   Go to MN04 transaction and maintain the "Date/Time" as 3 for the specific output type condition record as shown below:
   Test the scenario again with a new PO. Now, system wont generate the spool immediately after release and save in ME29N and the output will be "in process" mode (yellow signal). You can process the output in ME9F transaction to display and print.
Regards,
AKPT

Released Change Requests have changed status to modifiable

Hi all,
something very rare happend some days ago in my development R/3 client. Every released change request appear as modifiable, i mean, all the change requests that have been released before a specific day (eg. 14 Setiembre) now appear as modifiable.
The tasks that these change requests contain maintain the correct status (released) but the father change request appear as modifiable.
SAP says something about avoiding import requests(scc1) when other requests are been released. I didn't got it.
Now we need a secure way to correct the status of these requests. Can you help me please.
REgards,
Christian

From my scant knowledge I would recommend reading about SE03 to verify system settings (not modifiable, etc.) and be looking at SCC4 for checking the changeable status for applicable client. You should be checking STMS and its documentation very carefully.<a href="http://help.sap.com/saphelp_nw04/helpdata/en/44/b4a0137acc11d1899e0000e829fbbd/frameset.htm">Transport Management System</a>
I am sure other Gurus can help, but I remember reading documentation for these transactions as well as SE95 (Modification Assistant).
Please post these kind of questions in the appropriate forum, by the way.
Thanks,
Marilyn

Will releasing my app in iTunes connect change the release date?

Hi there,
I have an unusual situation. We submitted version .9 of our app to the appstore, and it was approved. Even though the game is not done, we did this because we wanted a version that we could submit to the Indiecade festival (deadline today!), and we wanted to be able to send them a promocode rather than have to go through all of the hoops of UDID and all that.
We have a release date set for far in the future, and we also have the game set to 'pending developer release'.
Even though the game was approved and is ready for us to 'release' to the store, it wont yet spit out promocodes for us yet, because it is not 'live'. I want it to go live, but not actually be available on the store. I think this will work, I'm just concerned that if we push that button, it will change our release date and actually make the game available on the app store.
Can anyone confirm that this is NOT what will happen? I hope I'm making my situation clear. Thanks very much.
Chris

I would suggest you contact the iTunes Store via your iTunes Connect account and ask them. That's the way you'll get definitive answers; we're all just fellow users here.
Regards.

PO release change in release code

Similar Messages

Maybe you are looking for