PO Release stragety based on Info record price

Hi MM Gurus,
Can someone tell mw how to achieve this? I want to do a PO release strategy in which the system checks whether the price that is manually entered in the PO is equal or less than the price mantained in the inforecord for that material. If the price is higher then the strategy is triggered and if not, then no strategy applies.
I assume this strategy will apply by item and not at the header level, any ideas on how to achieve this.
Any inputs will be highly appreciated.
Thanks and Regards

I don't think it will be possible specially bcause have you thought about the number of characteristic values can be! We can use a dummy field from the CEKKO or CEBAN and by using any user exit related to release strategy we can map the same but again what about the values!
Regards,
Indranil

Similar Messages

  • Update info record price

    Hello,
    We have requirement to update 2 info record prices based on qty irrespective of validity .i.e.
    the first supply of 100 qty will at price u201CXu201D and there after the price will be u201CYu201D.
    How do we maintain info record ?

    Dear All,
    After supply of 100 nos, we will release order which may be less the 100 and the system should pick up Y price.
    Scales will not help our requirement.

  • Costing based on info records

    Hi experts,
    We are facing problems setting up costing based on info records. In our valuation variant we use Strategy Sequence "Price from Purchasing Info Record" and Sub-Strategy Sequence "Quotation Price via Condition Table", as well as stating the relevant Condition type in Delivery Costs.
    The price of the material and condition type is set in transaction MEK3.
    The costing works as it should, but only if no purchasing requisitions exists on the material. But if requisitions exists on the material, the costing instead use this price. How to avoid that; i.e. how to make the costing always picking the price set in transaction MEK3?
    BR,
    Niclas

    Hi
    I cant say for sure.. you can download these notes from T CODE SNOTE...
    After getting downloaded, an icon shows on left side based on which you will come to know if it can be applied or not...
    Else, you can raise a OSS msg to SAP saying that this note seems to be relevant to my issue, but does not match with my release of SAP... They will get back to you, if they have any
    Regards
    Ajay M

  • Info Record price wrt inco terms

    Hi
    The current scenario is that the info record price maintainance is mandatory.
    However in a scenario that is import there are prices based on the inco terms.
    Is this possible? For eg Price when CIF is 100 and when FOB is 90 for the same material vendor purch org combination
    Thanks
    Rahul

    Hi
    Yes this is possible, if you need to determine your price based on the Incoterms then you need to maintain the condition records accordingly.
    Maintain the condition records with the key combination containing the Incoterms.
    If you do not have any key combination then you createa  new condition table and assign it to the access sequence and then you can create the condition records.
    Configuration steps are in the Price determination process in Purchasing
    Thanks & Regards
    Kishore

  • How to update info record price in to material master as a standard price -

    Hi Experts,
    We have a client requirement as below:
    Client wants to compare the info record price per material for all related vendors.
    Once he arrives at the best effective price (Material Price + Freight + Duty), he would want this price to update in the Material Master Record as Standard price.
    I know we can use MR21 and LSMW to update this manually but we are looking to automate this process as we have more than 100,000 records in the system.
    Can the above requirement be addressed through CK40N? if yes, How?
    Thanks,
    Jammy

    Hi Jammy
    Usually, in std SAP, if there are multiple condition records, the one with lowest price is considered by the system in CK11N/CK40N
    Configure your valuation variant to pick up price from info record... As far as I remember, the one with lowest price would get picked up when you do costing run...
    however, if your requirement is bit different than this, but is based on a logic which can be configured in the system, then use Valuation Strategy U in your Valuation Variant and write your code accordingly in the exit COPCP005 (Component EXIT_SAPLCK21_002.)
    Regards
    Ajay M

  • Fixed vendor Info record price report

    Hi,
    Is there any SAP report which can only show me the current info record price for multiple materials for their respective fixed vendors?
    Sincerely,
    Puja

    Hi Pooja,
    You can try ME1P transaction.
    Cheers,
    SAtish Purandare

  • Info Record Price

    Hi !!
    My PO is of date 01.01.2010 & now I changed Info record price from date 01.01.2010 & today is 10.04.2010,but how this will be changed in PO.

    Hi,
    Open Po in change mode go to conditions and then click on update select B Carry out new pricing.
    Thanks and regards,
    Amol S. Arote.

  • Automatically update of the info record price conditions from last purchase

    Dear.
    I need to massive update the info record price conditions from the last purchase order price for a list of materials.
    Does exist a standard transaction where I can I do this ?
    Thanks.

    hi,
    Yeah, I just checked it..
    Its not possible in Std. SAP system...
    There is no field provided for the same...
    the other way, but doesn't applies to you...as you are doing massive job...
    still if req. then check..
    The other way is:
    Maintain Quotation and ref. it in inforecord...price gets updated easily from it...
    Regards
    Priyanka.P

  • Fetch Info Record price from ECC 6.0 and print on Consignment Contract form

    Hi, we need to fetch the info record price from ecc 6.0 and print it on the consignment contract form. the system for using consignment contracts is not designed yet. once it is designed the consignment contracts would be created in the srm system. we're using srm 5.0 and using extended classic scenario. currently the purchase contracts are being created directly in the srm system. someone plz help me with this.

    knock knock...anyone here? plz help me.

  • Costing issue-Why Info record price is not read ?

    Hi,
    We have an issue while costing a Material procured externally.
    Valuation Variant >>> Priority 1-Info record price. >>Priority 2-Material Master valuation price.
    However, system is picking the price matained in the Material master.
    I have verified the validity of the info record and the Blocks on the Vendor and seems ok.
    Are there any specific checks need to carry out to know if the info record is a valid one.
    Any idea why system is picking Price from Material Master?
    Your help is appreciated.
    Kind Regards
    Umapathi G

    HI Umapathi
    Does any scheduling agreement exists for this info record
    refer this link.. This issue is pretty common these days and has been discussed many times in the forum
    CK11N- Material cost estimate with & without agreement
    Regards
    Ajay M

  • No valid info record price when creating PO

    When I created a PO with an info record, but no valid price for the date, the system used the most current PO to price the new PO.
    Is there a way to have the system give a warning message that there is no valid info record price?

    Rahim
    I made the change to the setting and it did return a warning for NO info record.  But the second time I used the material/vendor, there was no warning theat there was no valid info record price
    The PO just used the price from the previous PO with no message about the source.
    How would a buyer know that he needs to go "do something" about an info record price?
    thanks for you help
    Althea

  • Info record price should be Mandatory in PO.

    Hi Experts,
    I wanna to do Info Record Price mandatory while creating PO.
    System should give Error Message if the price in PO & Info Record Differs?
    How it is possible?
    Thanks in advance.

    Hi ,
    As jurgen suggests , you could do with exits.
    If there is possibilty for you to change the pricing schema.
    Then have a schema which has only PB00  condition with access restricted to Info record only. This might create a situation where price amendments can be done only with info record and PO's created will always have the pricing in sync with info record.
    Correct me if my thinking is wrong.
    Harish

  • Update info record price, when changing contract price

    Hi
    In the SAP OSS 569885  it is precised clearly:
    If an info record already exists, upon creation or change of
    a contract, neither price nor conditions are updated in the info
    record.
    So, my question is:
      Is there any way to update info records  prices upon a contract change or creation .
    thank you in advance for your support

    the info record is a kind of general, means it has the general price. A contract is an agreement for a certain quantity and price and period that may have a price that you can only get from your vendor  with this kind of agreement. So it is not really logical to have the contract price in the info record, too.
    There is no way to get this update automatically.

  • Info record price log

    I want a log of the price change for an Info record?
    How can I get it?
    Regards
    VS

    Hi ,
    Execute the program RV16ACHD in SE38  . u will get the change documents for the info record price changes .
    Please reward points for useful answers
    Regards
    Mani

  • INFO RECORD PRICE UPDATING

    Hi guys,
    I have a semifinished good for which the std price is getting updated by Costing Run(PP). Now I want to release the P.O for the same price to Vendor.
    How it is possible to update the info record net price with Std price of the master record automaticaly.
    And I need to add the overhead cost by condition types and save the Info record.
    Please guide with your valuable inputs.
    Point shall be awarded.
    Thanks,
    Dhanu.

    Hi,
    Please create Info record for the vendor in ME 11 with the standard price in the Material Master record
    Normally for purchasing info record for Semi finished goods only Moving average price is preffered.
    After creating the Info create P.O.
    G.Ganesh Kumar

Maybe you are looking for

  • Group Policy - User Rights Assignments not taking effect on workstation`

    Novell 5.1 SP7. ZenWorks 3.2 sp3. Windows XP Pro workstations. In Group Policy, (Computer Configuration/Windows Settings/Security Settings/Local Policies/User Rights Assignment), I have added Power Users to the "Load and Unload device drivers" policy

  • How do I replace my ipod with a new one?

    My ipod completly doesnt work

  • Monitor ICC profile supported with Adobe Reader?

    Hi, I know Reader supports reading of input ICC color profiles like in embedded pictures (sRGB, Adobe RGB, etc.), but it seems it doesn't support outputting to the monitor's ICC profile. Is there a way to do this? I have used Reader 8 and 9. I need t

  • Updates template don't come through on the site

    What I have been trying to do is update a template and apply it to all files that are based on this template. The problem I have been encountering is not inside dreamweaver itself: the template is updated automatically in every file I want it to. The

  • E75 mass messaging

    hi i'm currently using an E75 in Singapore, with SMS 2.0 (by affle) installed. i cannot send mass smses - not even to TWO people. everytime i try to send to many people, only ONE message will get through, all the rest will end up "waiting" in outbox