PO Release strategy workflow not getting transferred

Hi All,
I have done all the configurations related to PO release strategy workflow but when transferred to Quality certain configuartion done in PFTC workflow builder are not getting transferred.
I also got message like 'release of purchase order transferred to buffer'.
Please guide.
Thanks in advance
Pavan H S

Hi,
In QA
1) Go to SWU3 check Workflow Configuration Done or not
2) Execute the workflow in SWUS and check it
3) If it working, test the workflow it via T.code SWUE, If not working then workflow is deactivated
4) You have to move the Workbench Transport Request first,  then you have to Move customizing Transport Request.
Regards,
Surjith

Similar Messages

  • Release strategy is not getting Trigerred for Multiple Plants in PO.

    Dear gurus,
    I have a Release strategy which is working Fine when I create a PO with Same Plant in line items.
    But My release strategy is not getting trigerred when I have Different Plants in Line items.
    I have Maintained all the Plants in the characteristic Values of Plant.
    Why does the RS work for Single Plant & doesn't work for Multiple Plants in the same PO.
    Is there any SAP Note applicable to this? Pl Suggest.
    Thanks guys
    SN

    i got your point but i will again say the same thing that for item level field system is not  able to block the po if there are multiple line item in RS and that too with different values against same char as system picks only 1 value and it sends that value in RS to cross check wheteher this po needs to be blocked or not .
    now in your case system is getting multiple values against 1 field that is plant so now system is not able to send 1 in backend and hence it sends blank value in back end so system dosent blocks the po
    even if you use material group or any other item level field system is going to behave that way only that is it will not be blocking the po

  • Purchase order release strategy Workflow not working

    Hi All,
    I am working on PO Approval release strategy and it is not working fine . The release strategy set up is configured by my functional consultant . I just copied the standard workflow template WS20000075 and making changes to my custom workflow template . When ever po is created an event "RELEASESTEPCREATED" get triggered and the first approver receives an workitem and when he approves it goes to Second Approver and it is working fine . But when rejected then a notification email goes to initiator . Now when an initiator login into ME22N and made any changes ( even material text change ) in it then again "RELEASESTEPCREATED" event getting triggered . But I need to trigger my workflow only when there is change in PO Net value .
    Kindly help me how to achieve this functionality .
    Thanks and regards
    Dilip

    Hi Vikram,
    There is already an existing entry for BUS2012 with event CHANGED against the change doc EINKBELEG .
    Acutlly when login as initiator and try to change PO through ME22N here are my observations :
    case 1:   When Buyer click on  " Cancel Reject " button and do any changes ( even text change ) then RELEASESTEPCREATED and CHANGED events  are triggering  . But since the event linkaged is set to RELEASESTEPCREATED workflow get restarted again.
    Even the CHANGE event does'nt have 'RELEASECODE' as parameter to restart workflow .
    Case 2:  When Buyer doesn't click on " Cancel Rejection" buttion and do any changes then only CHANGE event get triggered
    which do nothing since there is no event linkage .
    Is to  click on " Cancel Reject" button mandatory ? .  But even though we make " Cancel Reject"  as Button mandatory then RELEASESTEPCREATED Button triggering for any change but we need to trigger it for only net Value change .
    Thanks and regards,.
    Dilip Kumar

  • Workflow configuration not getting transferred

    Hi All,
    I have done all the configurations related to PO release strategy workflow but when transferred to Quality certain configuartion done in PFTC workflow builder are not getting transferred.
    I also got message like 'release of purchase order transferred to buffer'.
    Please guide.
    Thanks in advance
    Pavan HS

    Hi Santosh,
    What settings I have to do in PFCG. User is able to release PO in ME29N.
    Thanks and Regards
    Pavan

  • Standard PO workflow giving error due to Release coe is not getting passed from event

    Hi Team,
    I am getting the below error while processing the Standard workflow for PO.
    I think its due to the Release code is not getting passed from Event to workflow.
    Can you please sugest from where the release code is getting fetched before triggering the event.
    Error processing following event linkage:
    BUS2012 RELEASESTEPCREATED WS20000075
    Following error occurred:
    SWF_RUN 594
    Message text:
    Import container contains errors (are any obligatory elements missing?)
    Event container appended as attachment.
    Event linkage not changed.
    Event stored temporarily.
    Events can be redelivered via event queue
    administration (transaction SWEQADM)

    Hi 
    Please check threads, response by Fernando Carames, ( Jul 19, 2007 2:37 PM): http://scn.sap.com/thread/483005
    Or by Trevor Ticehurst  on Oct 9, 2008 3:39 PM at:  http://scn.sap.com/thread/1080411
    OR
    http://www.sapfans.com/forums/viewtopic.php?f=26&t=297786
    All these mention certian notes which may be helpful.
    However, it is important to first ensure that the release startegy is configured and working properly (check with your MM con)
    regards,
    Modak

  • PO release strategy workflow based on plant

    Hi Gurus,
    I am setting up PO release strategy workflow.  We have purchasing at plant level.  Fg. plant 1234's PO should be sent to the plant 1234's purchasing dept.  Plant 5678's PO should be sent to the plant 5678's purchasing dept.  In PR release strategy workflow config. screen, there is a plant field.  However, plant field is not showing in the PO release strategy workflow screen.  they are both in the table T16FW, and plant field is define in the table.  Pls help and explain how we can get plant field in the PO release strategy workflow config.  Or if this is what SAP design, then is there any other way to accomplish what we want?  Thanks a lot!

    We have one requirement where PO Release should trigger if amout of PO is greator then PR value. Let me know how this can be achived as I understand that both have different communication structure like CEKKO & CEBAN.
    Hi,
    You can try doing it with a WorkFlow as you identified communication structures differ.
    Regards
    Shiva

  • In PO Release "PO release effected" is not getting executed

    Hi All,
               I am working on PO Release WorkFlow.
    when I execute the WF of PO release, its executing the first task "please release PO" but when I relase the PO from my work place the second step "PO release effected" is not getting executed. I could not found why this is happening.
    Please help me in this issue.
    Thanks.
    Ranganadh.

    Thank You Adithya,
                                     I have copied the standard one i.e. WS20000075. I am executing the workflow directly from the Workflow builde by giving the PO number and release code.
    with this in my business workplace I can able to find the workitem.
             I am releaseing the PO from the Workplace. After releasing the PO also I am getting the status of the workitem as "Inprocess".
             In workflow log I found that only first task (PO Released) has been executed the subsequent steps are not getting executed.
             Would be there any settings are missed out??
    Thanks.
    Ranganadh.

  • PO attachment will be attaached in po release strategy workflow

    Hi Gurus,
    PO creator are adding new attachment(Format : PDF) to  PO (ME22N Transaction).
    Where this PDF get stored and how to get retrieve this data Becoz need to attach this in mail in workflow.
    How to attach this file  in PO release strategy workflow as a mail attachment.
    Thanks,
    Ragav.
    Edited by: ragul1602 on Jan 9, 2012 2:21 PM

    Hello,
    Attaching a file isn't a problem; finding it is. Maybe you would get a better/quicker answer at another SDN forum (SRM?).
    regards
    Rick Bakker
    hanabi technology

  • Release Strategy/Workflow for MB21 Reservation

    Hello Gurus,
    I know as per Standard SAP it is not possible to have a release strategy/workflow for MB21, but if any of you have come across this requirement where material reservation should be approved by related dept heads before the material is issued for those reservations, please reply back with the possible options to configure release strategy or work flow for MB21 even thru development or any other work around.
    Your expertise advises will be very helpful for me to work around this requiremnt.
    Thanks in advance, looking forward for your reply

    Hi Anoop,
    Reservations in SAP is just a logical value, which does not have any impact on any stock type. It would be interesting to know why the business needs approval process for reservations.
    Anyways even if you need approval process, what you have to do is develop a custom object, where in when ever the business creates a MB21 reservation, assign a unique number to each reservation number.
    As a dept head, the business will run the ZMB21, checks the reservation to which he needs to approve. In the back groud call up the unqiue id assigned and place approve button where in dept head can approve the same.
    The authorization to this custom tcode should be given as per your requirement.
    Hope this helps
    Ilyas

  • PR Release Strategy Workflow

    Hi All,
    I am working on PR release strategy workflow.
    I have developed a custom workflow in which i m using a custom method to release the PR based on some conditions. Workflow is working fine. But the PR is not released. I am not able to track why is it happening?
    actually initially i am using bus2009 and later in a task that calls this custom method i am using zbus2009 to call this custom.
    I think the data i.e; is not being sent to the method container. I tried, but didnt succeed
    Can anyone help me in fixing it?
    Thanks,
    Raj

    Is the Method working when you are Testing the Method from SWO1 with the data you have used in the Workflow instance.
    If yes then it is a problem of Binding. Please check whether the parameters are properly binded. Please make sure that the Buiness object that you are using is the same for the method for whose BO you are calling. Analyse the Workfow Log from SWIA and it will solve your issue.
    Thanks
    Arghadip

  • Master recipes operations not getting transfered in SNP PDS to APO from R3

    Hello APO Gurus,
    I am trying to transfer SNP PDS for master receipes from R3 to APO.
    Issue description::
    The operation is not getting transfered correctly , some system default operation "010 generated Operation (from Planned Delive)" is getting generated in APO, also activity and resource capacity is not getting transfered. This situation exist for one plant 1000, for other plant 1100 the SNP PDS created correctly.
    i have following points:
    1. Is there some customizing setting missing on R3 or APO side  for plant 1000 tbefore SNP PDS transfer
    2. What need to be checked on master recipes data in R3,
    i have checked on below points
    1. FG Materials and all the Component Material to be in APO in a Active Integration Model.
    2. BOM & Routing and Production Version setup correctly.
    3. The Routing Operations have to Relevant to 'SCHEDULING'.
    4. Try deleting the existing Integration model for materials & re-create new IM & activate.
    Please help me to send SNP PDS correctly to APO to take heuristic run.
    Regards
    Gajendra
    Edited by: Gajendra_APO on Aug 23, 2011 1:14 PM

    Hi,
    It is good that you have given your already checked points.
    Please check the following things also and try to retransfer the PDS.
    1. Check your resource in ECC, whether you have maintained the Process formula.
    2. Check you have maintained some values in Master Recipe for processing time
    3. Check whether the resource has been transferred for your plant 1000 to APO and an active IM exists.
    4. Also check the type of the resource transferred to APO. It should be a single-mixed/ multi-mixed or bucket resource.
    Hope this will help you to solve the issue.
    Regards,
    Manimaran M.

  • I just noticed that some of the movies I had in iTunes did not get transferred to the iPhone. The missing movies are shown as generic movie icons in the iTunes panel. How do I get the original movies to show up again and transfer to the iPhone?

    I just noticed that some of the movies I had in iTunes did not get transferred to the iPhone 5. The missing movies are shown as generic movie icons in the iTunes panel and are checked to select them. But they do not show up in iPhone Videos. How do I get the original movies to show up again and transfer to the iPhone? I recently upgraded Mac OS to 10.6.8

    1. iTunes won't offer cloud downloads for songs that it "thinks" are in your library, even if it "knows" the files are missing. If you've exhaustively searched for the missing files and there is no prospect of repair by restoring to them to their original locations, or connecting to new ones, then delete that tracks that display both the missing exclamation mark and are of media kind Purchased/Protected AAC audio file. Don't hide from iTunes in the cloud when asked, close iTunes, then reopen. You can download from the cloud links or iTunes Store > Quicklinks > Purchased > Music > Not on this computer > All songs > Download all.
    2. Why? Not sure, perhaps 3rd party tools or accidental key presses combined with previously hidden warning messages when trying to organize the library. There is a hint that using the feature to downsample media as it is synced to a device may also be involved, though I've not replicated it. Whatever the reason a backup would protect your media.
    tt2

  • Release Strategy is not picking up in the PO.

    Hi All
    I have defined a Release Strategy for the Purchase Order.
    The Characteristics are
    PO category
    Pur Org
    Total Net Order Value
    All the lights are green which i check the release strategy.
    But the Release Strategy is not picking when PO is created.
    Kindly let me know what is the mistake i have dont or i need to make any corrections.
    Thanks in advance
    Renukaprasad.

    Hi Renuka,
    im using ECC6, my PO rel strategy dont have PO catergory,
    but you can try this:
    Maintained PO characteristics:
    PO doc type
    PO Plant
    PO Pur Grp
    PO total Value
    Once your PO meet this, Rel Strategy triggres.
    When you define the Rel Strategy, there is rel indicator Approved and Block, configure based on your requirement.
    Hope this helps a little
    Regards,
    Maia

  • HT201269 while transferring data from iphone 3GS to iphone 4S SMS details are not getting transferred.

    While transferring data from old iphone 3gs to new iphone4s through itunes the data in messages is not getting transferred.

    @ melfromvictoria
    Have you tried right clicking on the 4s and select "restore from back up"

  • Inbound Delivery not getting transferred to GTS

    Hi Experts,
    We are presently implementing GTS 7.2 Customs Management in my company and we are experiencing this issue. Here are steps completed for the document transfer.
    1. GTS plugis are activated for the Inbound Delvieries along with other documents.
    2. All the basic configuration is also complete in the GTS system.
    When we create a inbound delivery in ECC 6.0, it is not getting transferred to GTS. But when I go set the incomplete check buttoen either at header or line item level of the delivery, then it is immediately transferred to GTS.
    I checked all the config related to incomplete procedure for SD/MM documents in ECC. I am able to see the green light automatically set (after the config VI29 and VI49) at the header/item level but still incomplete set is not automatically set. Can you please help to find are there any other config which needs to be done to make this inbound delivery automatic. I understand there is a user exit for this, but I would like to accomplish without userexit.
    Thanks in advance.
    Vijay.

    Hi Vijay,
    Ok, that's a lot clearer - thanks.
    I'm fairly sure that those "SET" buttons have no influence on the transfer of the Inbound Delivery to GTS.  And, as far as I know, they have no internal functionality - the toggling buttons are provided just so that you can flag manually if required for some reason.  My guess is that making ANY change to the Delivery would have the same result.
    The other question I should have asked is; why are you trying to transfer the Inbound Delivery?
    - compliance checks?
    - transit declaration?
    - customs declaration before GR?
    That's to say; what gets created in GTS when the Delivery transfers?
    Best regards,
    Dave

Maybe you are looking for