PO Release workflow plant wise

Hi,
We are having one scinario, we were required to trriger workflow mails to required users plant specsifically but in workflow configuration for PO there is no plant coloumn as it is for PR.
we are having total 27 po release strategy useing common release code diffrent plant.
can you be able to tell how to configure the PO release strategy plant specific.
rgds

see workflow item identifies its agent through different means, direct user assignement, rule, org structure etc.
i think u can create a rule in which u can make the logic to select users for plant.

Similar Messages

  • Workflow aprroval company or Plant wise

    Dear Gurus,
    I am new to work-flow I want to change my work-flow acco. to company/plant wise as right now the work-flow mail for approval is going to our both companies employees  for approval irrespective of their plant/company.
    i want to amend that work-flow that approval mail it should go to employees of concerned plant or company only.
    Thanks in advance
    Himanshu

    Unless you provide all the details it would be highly unlikely that you can get any meaningful assistance from this forum. Anyway looking at the query I believe you would get better help if you post in Workflow forums providing all the details.

  • List of released PRs not yet converted to POs - plant wise

    Hi Experts
    I have to develop List of released PRs not yet converted to POs - plant wise. I don't want standard report. I want customized report based on plant.
    Let me know about the logic ie. i have seen EBAN and EKPO Tables. In that which one is the indicator for whether Po or not.
    Could anyone help me for this issue.

    I have got it .
    Along with the other options mentioned above, as soon as i checked 'Closed Requisitions' , i was able to see all the PRs and also the one which i was looking for.
    Below are the options which i checked: and in the Dynamic Selection I used 'Created By'
    Check   ->  Assigned Purchase Requisitions
    Check  ->  Closed Requisitions
    Check ->  "Partly Ordered" Requisitions
    Check -> Requisns for Overall Release
    Check -> Requisns for Item-Wise Release
    Thank u to all of you .
    Closed

  • Payment Release workflow WS00400012

    Hi,
    I am using payment release workflow WS00400012,in configuration I have given subworkflows WS00400011,WS00400021 & Ws00400022 with different amounts.But when i  post the document it only goes to one level ie.WS00400011, I checked workflow WS00400012 there in step 82 , one level subworkflow (WS00400011) is given in task, so the system takes only one level of release irrespective of amount of document.
    My Question : How to call different release level in workflow based on amount.
    Is any changes are required in standard workflow WS00400012 for having amount wise release level.
    Thanks
    Nishant Mittal

    Hi Nishant ,
    Why dont you have a look at the release authorizations in SPRO. Try to give varying amounts.
    Meanwhile , let me have a look. Will revert by Monday -21.08.2006.
    Cheers
    Kartik

  • PR release Workflow

    Hi All,
    Wanted to set up PR release workflow.
    1. While having look at a template WS00000038, came to know that Agent assignment is not available for std template.
    Whereas documentation says that rule 00000148 shuld be used for item level release workflow step.
    Do i have to do the configuration of the template to include this and its binding inside workflow template?
    2. Do i have to configure both the templates i.e for item wise release and Overall release?
    Thanks in advance.
    Regds,
    Akshay

    Hello Akshay
    You might have to configure both workflows (and relevant customizing) for item-wise and overall release depending on your client's needs; if they need one, the other, or both, you implement that one.  The standard workflow for overall release is WS20000077, just in case.
    As for setting up the rule in the template, the agent assignment rule for task TS00007986 is not found in the workflow, but rather in the task itself.  Check the task definition and take a look at the "Default Rules" tab of the task: you'll find rule 00000148 and its corresponding binding there.
    Of course, if you want to tinker around with the standard configuration (which depending on your client's needs is a likely possibility), in my opinion it's good if you just copy the standard and adjust the copy.
    Hope this helps!
    Juan Ramos

  • Report to show unsettled Orders Plant-wise

    Hi All,
    Recently we had some problems in settling orders during year close..now we want to see if any orders are there which are left over for settlement to make them settle manually..is there any report to show Orders settlement status Plant wise?
    Appreciate your quick response.
    Thanks in advance.
    Regards,
    Sree

    Hi,
    Good evening and greetings,
    Please use the transaction code COOIS for getting the details using the dynamic selection option.
    Please reward points if found useful
    Thanking you
    With kindest regards
    Ramesh Padmanabhan

  • Report for monthly sales(sales office wise,sales group wise,plant wise)

    Please send the Report for monthly sales(sales office wise,sales group wise,plant wise)  with T.CODE.,

    Hi
    As per my knowledge there is no Standard Report in SAP based on sales office, sales group. and plant.
    You may create your own report using MC18,MC21 and MC24.... Otherwise ask your ABAPer's help...
    Muthu

  • Issue in PO Release Workflow WS20000075

    Hi All,
    We have activated Std. PO release Workflow WS20000075 for two step release levels. When New PO created with release strategy this workflow will trigger and send workflow items to Agents to release Purchase Order. Up to this it's working fine.
    But the problem occurs to trigger Workflow again after PO price change. We have release change indicator with 5% variance of price. That means when some one changes the Price or Quantity and if the total values variance more than 5% of price variance then Release strategy will activate again in PO. But in this case Workflow WS20000075 not sending workflow items again to the agents.
    Is there any workflow setting causing the issue?

    Hi Sivaparvathy ,
    As far I can understand in SWEL event trace for the second time the event is getting triggered but there is no appropriate receiver for that event. Can you please specify the event name. If it is any event other than RELEASE for eg lets say if it is CHANGE, in the workflow WS20000075 header you will have to bind the workflow with this event and activate linkage for this particular event as well(without changing the previous configuration for PO release event). So that the workflow is triggered for this event as well..
    Hope this helps
    Regards
    Anik

  • Plant wise stock report

    Dear All,
    I want get a report from Apr to March of a fiscal year.
    The report should contain plant wise purchase, consumption, opening stock and closing stock values.
    How can I get the report.
    Regards,
    Venkat

    Hi,
    For your requirement, report MB5B suits well.
    here in selection screen, select "Non-Hierarchial Display" option and also input the Validity Period as per your requirement and execute.

  • A/c determination process - automaticaly flows to the exact plant wise

    HI,
    I'm posting again, on my blw query,
    Pls explain the process abt a/c determination for service po's (with item catelory & a/c assign) during miro.
    For example. I have three plants and same tax codes used for all plants and gl numbers are diff as per below. ,
    For plant #1 - ESA - 101, ESE - 102, VSE -103
    For Plant #2 - ESA- 201, ESE-202, VSE-203
    For Plant #3 - ESA- 301, ESE-302, VSE-303
    And assume gl is assigned in OB40 (w/o tax code combination) as,
    ESA-101 , ESE - 202 , VSE -303 .
    While doing miro for what ever plant, it's going and set on appropriate plant g/l nbrs based on trns. key.
    Pls tell me how a/c determination process flows automaticaly to the exact plant wise.

    Hi ,
       For the automatic account posting to different G/L account for different plant---- Group the plants with different grouping by assigning different valuation grouping code. All the automatic account posting config is to be done for each of the valuation grouping code.
      Thus the automatic account postings to different G/L accounts happen for different valuation grouping code.
    Thanks & Regards,
    Amjad

  • A/c determination process flows automaticaly to the exact plant wise

    Dear All,
    Pls explain the process abt a/c determination for service po's (with item catelory & a/c assign) during miro.
    For example. I have three plants and same tax codes used for all plants. I have defined in FS00 different G/L number for every plant as per below,
    For plant #1 - ESA - 101, ESE - 102, VSE -103
    For Plant #2 - ESA- 201, ESE-202, VSE-203
    For Plant #3 - ESA- 301, ESE-302, VSE-303
    And assume gl is assigned in OB40 (w/o tax code combination) as,
    ESA-101 , ESE - 202 , VSE -303 .
    While doing miro for what ever plant, it's going and set on appropriate plant g/l nbrs based on trns. key. pls tell me how a/c determination process flows automaticaly to the exact plant wise.

    no answer

  • PR  Release Workflow  Problem in   " Rejection of PR   "

    Hello Everybody  ,
    When Purchase Req is  Created by End User  ,  this is Approved by Higher authority   When PR is Released  Workflow is trigering  but when  PR is Reject Work flow is not trigering ?
    Is there any soultion for Rejection of PR  ?
    Regards,
    Sandeep

    Hi ,
    are you using  the standard workflow..?
    can you see the standard workflow   WS00000038(purchase requisition release).
    Have u maintained these things.?
                                                    Release Groups
                                                 Release Codes
                                                 Release indicator
                                                 Release Strategies
                                                 Workflow
    may be it is useful.
    and  check the 'userdecision' .
    once PR requisition is  released, we  can goto tcode ME53N  there we have to select
    release,or rejected .
    if the rejection is not working properly please check the released codes.
      if you know more about this plz post  the reply.
    regards,
    sateesh.c

  • PO Release Workflow Problem

    Hello,
    This is regarding PO release workflow(WS20000075).
    I fail to understand as to how I can trigger workflow on realising PO
    from ME29N, though using SWUS (Test Workflow) I am receving message
    in the sapoffice mail.I am not really able to link the application with the workflow.
    Secondly I dont understand why the second task i.e., Release Purchase Order Effected' does not trigger when I test the workflow.The message i receive is 'Please release purchase order no ....' and not 'Purchase order Released' when I test the workflow using SWUS.
    Kindly advice.
    Regards,
    Sumit

    The deactivation is happening as there is some error in the instances. Please change the settings in SWE2 for WS20000075 entry and change the field of Feedback after error as Do Not Change Linkage. The error might be due to some authorization issue please check from SWEL and analyse accordingly.
    Thanks
    Arghadip

  • How to get open production orders by plant wise

    Hi,
    How to get open production orders by plant wise.
    i know from tcode COOIS, is it possible to get from this. if so what are the parameters we have to give to get open production orders by plant wise.
    is there any tcode or tables available , please provide details .
    regards,
    Hari priya

    Hi,
    What is your definition of Open Production Orders?
    Definetly you will get the report from COOIS for Plant wise.
    Whther you want to consider all the Orders having the Status REL but not DLV?
    Then there is a chance of having the Orders, still with PDLV status but GR is done for the full Qty. May be you don't want to consider the TECO status, eventhough the Order is short closed??
    Better to ommit the Orders with CRTD status also..
    So, based on this which status to consider and which status not to consider..
    You can define the "Selection profile status" in BS42.
    Use this selection profile in COOIS, so that the rsults will be accurate..
    Best Regards,
    Siva

  • Dead Line Monetering in Purchase Order Release Workflow

    Hi Experts,
                     I have  activated Standard Purchase Order Release workflow and it works fine now i have a requirement of Dead Line monetering for 2 days. In Standard Release Activity TS20000166 if i give 2 days in Latest End.
    Will it work in such a way that if the first approvar does not take any action for 2 day then it automatically esculates to the next person in the release strategy.
    Or should i use Modeled Deadline for esculation to next Level.
    Regards,
    Hari

    Hi,
    If you just have 2 days on the latest end tab, the workflow will only send a deadline notification to the current agent and WILL NOT escalate.
    You have to use modelled deadline and in that branch route the workflow to the next approver based on your agent determination rules.
    Satish

Maybe you are looking for

  • Trying to video ichat: not working

    we're both on leopard. the video ichat and the audio ichat don't want to work when I try to connect with my mother's iMac. it's giving me "wrong IP" as an explanation: which makes no sense to me. For a while restarting the computer worked and the con

  • Harddrive Probl

    Right,I have a 30 GB Creative Zen Vision M,and recently it froze while in use after resetting the unit it automatically booted in recovery mode. After trying the clean up function it where it stopped on scanning disk I tried formatting where all I go

  • NT Backup fail by automatic scheduling Job.

    Hi , I am experience one strange thing that I scheduled windows NT backup tool to make the backup onto my IBM Tape Drive Ultrium (800 GB ) . sometime the backup automatically completed and some time I check and it shows nothing then I  Start manually

  • Schema......User/Owner

    Hi.. User is owner of Schema.. Schema contains all the objects ownd by particular user. One user can be owner of one Schema. So.. user and schema is same thing? ( HR is Schema )

  • Where is my Firefox page..it has gone blank

    My computer screen was on Firefox and then went blank and white..I cannot get back to my home page and everything I had on my computer screen has gone. This is terrible.