PO releasing problem through ME28

Hi,
When i release the PO from ME28, system showing the following message : - No suitable purchasing documents found..
Note: - I define the new number range for the another plant. also created the new document type for it. PO makes succesfully, but when i m releasing this, showing that message.
What should be the problem here or we should define the release streatgy for New document type / number range.
Plz help...

Check following things
1. You have correctly considered document types in classification
2. All plants have been taken into account in classification
3. Also check the PO value
And also see whether charachterstics, classes has been created and there has been proper assignment of both.
Regards,
SS

Similar Messages

WS2000077 (Purchase Requisition Release) problem

Dear all
workflow task WS2000077 (Purchase Requisition Release) causes the following problem:
While executing an approval release (ME54N) through workflow, the result is always 'requisition release refused'.
Does anyone know why?
I appreciate your help in advance

Hi,
Go through the below links it may help you...
Workflow Definition WS20000077 and sequence of the events, significantly...
po release workflow issue/problem
PR Workflow problem
std workflow ; user to role agent assignment ?
Regards,
Udaya.

RELEASE PROCEDURE THROUGH WORK FLOW

Dear Sirs,
        How to configure Release procedure through work flow for the purchasing documents? Which are the modules integrated for this configuration? Kindly
give me the procedure in detail.
Regards
Yoga

Hi Anand,
    Thanks for your response. In my question I had not mentioned about the criteria.
The criteria for release of P.O. is on the basis of net value of the P.O. and there are
two levels of approval as follows.
If the Value of P.O. is less than Rs.50,000/=, approval of level1 is required.
If the Value of P.O. is greater than or equal to Rs.50,000/=, approval of both level1 and level2 is required.
    1.If the value of P.O. is Rs.30,000/=, then it should appear in the mailbox of level1 only. It should not appear in the mailbox of level2.
    2.If the value of P.O. is Rs.60,000/=, first it should appear in the mailbox of
level1 and after the approval of level1, it should appear in the mailbox of level2
for next level of approval.
    Is there any detailed documentation available to cofigure the above scenario.
Regards
Yoga

Has anyone experienced internet connection problems through Comcast after taking a recent Apple security download?

Has anyone experienced internet connection problems through Comcast after taking a recent security update download from Apple??

Hello jessie029, and a warm welcome to the forums!
What browser do you connect with?
Safe Boot from the HD, (holding Shift key down at bootup), it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then Open System Preferences>Network>Configure>Proxies Tab, make sure none are set, like for HTTP & HTTPS to use at Home, if you use it at 2 locations, just make a New Location for home.
Make a New Location, Using network locations in Mac OS X ...
http://docs.info.apple.com/article.html?artnum=106653
Then try putting these numbers in Network>TCP/IP>DNS Servers for the Interface you're using...
208.67.222.222
208.67.220.220
Then Apply. These are safer/faster than most ISP's DNS numbers, and have been patched against DNS poisoning.
https://www.opendns.com/homenetwork/start/device/apple-osx-tige
How to Flush DNS in Mac OSX using the Terminal.
In Mac OSX versions 10.5.1 and before, the command lookupd -flushcache performs this task:
lookupd -flushcache
Reboot.

Sync problem through iTunes between iOS devices and iCal

This is a mess and has been troubling me for months. Please help!
***Devices:
iPhone 5, iOS current
iPad 1, iOS current
MacBook Pro 10.7.current, iCal (2.8 ghz ICD2)
***Sync setup:
I have and have used a MobileMe account but made sure both iPhone and iPad were set for *no* calendar sync. There's no sync checkbox for Calendar sync with the MobileMe Systems Preferences (there was in earlier versions). For the sake of thoroughness I went into MobileMe via it's web interface and deleted each calendar (creating a "tossme" calendar with no events in it because Mme requires one calendar). I signed out / sign back in periodically because I was getting errors occasionally. The online Mme Calendar is completely empty as far as I can see.
After a sync (for backup) I unchecked the Info > Calendar box and agreed to delete all events on the iPhone and the iPad. That wiped off whatever was on the iPad and the iPhone. Then I re-checked all calendars for both devices, setting them to not sync events over 30 days. The calendars on both the iPhone and the iPad now had events from the iCal calendars on my MBkP. But the iPad and iPhone calendars *also* had a few events not on the MBkP: They had "New Event" from when I created an even not he iCal calendar and then renamed and / or changed the calendar for that even. They *also* had the blank and default New Event.
***Test events
I then went to each device in turn and created an event at 4 PM today in the default calendar called, respectively, from iPad, from iPhone, from MBkP ical. I then synced both the iPad and iPhone through iTunes as usual. What happened is *exactly* what's been happening for about 6 months. Here was what was on each device after a successful sync:
MBkPro: Only the "from MBkP iCal" event and no other of these test events.
iPhone: Four events: New Event, from MBkP iCal, from iPhone, from iPad
iPad: exactly the same events as the iPhone has.
I then deleted *all* of the four events *just* from the iPhone and synced these devices in this specific order: iPhone, iPad.
After the deletion inn the iPhone and the since I end up with this: Just the from MBkP iCal on all three devices.
***Conclusions:
These devices sync but
--the MBkP *only one way*, that is *to* the iPhone and iPad, including (annoyingly) every iteration of an event instead of the final form of an event (hence every "new event"….)
--Both the iPad and iPhone sync all events back and forth amongst themselves and take as separate events every stage of any event *from* the MBkP iCal but nothing *to* the iCal on the MBkP. (This generates lots of other dups, by the way…I'm outlining the simplest case here.)
***Other stuff I've tried
Back when I could get iCal to sync calendars / events with Mme I using that as a conduit for sync between the three (i.e.: telling iTunes to ignore calendar syncing). And a bunch of other stuff. Same result.
I've examined lots of settings repeatedly. No change.
***What I want:
I'd like all three of these devices to
--sync as equals--each of them to sync their calendars / events back and forth (i.e.: the iCal on MBkP taking events from both the iPad and iPhone).
--Each of them to only have the most recently modified version of an event.
--ideally (but not as important) a copy of all these calendars and evens on the web-based MobileMe calendar (although I recall hearing that Apple is phasing out this function).
(Note that I rarely post here, please e-mail me at [email protected] if you comment here. Or does this system notify me automatically of any comments?)

I'm having the same issue.
It started when I updated the iOS 7 on my Iphone 5 and my ipad mini and downloaded de iTunes 11.1.
Now I can't sync my playlists all at once or even in few selections of playlists, because it gets stucked on fourth step "waiting for changes to be applied" and after some minutes the sync simbol disappear on iphone and continues on iTunes, but it does nothing.
I also left an entire night to see if the problem was slowness to sync, but it did nothing, it really gets stucked. I've also tried a few different ways to sync (restart, reset, clean logs), but it doesn't work and it isn't allowing me to sync a couple of playlists in a row. Sometimes even a single playlist is not syncing.
I believe a new iTunes release it will be required

RELEASE PROCEDURE/ TCODE ME28

Hi,
We have upgraded our system from R/3 4.6 c to ECC 6.0 and the UPGRADE is PURELY TECHNICAL i.e new functionalities are not offered and R/3 4.6 c existing functionalities are maintained in ECC 6.0 as it is.
After upgrade ME28 is not displaying suitable purchaisng documents to be released by a user when he is using his release code and release group , though in Release strategy tab of PO it is showing that this document is to be released by the user as other two had alreadyapproved it.
Release strategy is working as for other release code it is coming ( checked in release simulation also) but not for this user who has to approve finally the PO as everytime he is using the code ME28 ' no suitable purchasing documents found' message is coming.
Rewarded if answered .
Regards
Ankur

Hi Ankur,
Since you mentioned that release strategy is working fine, try to trigger the release strategy for this PO once again. You can do either way:-
a. Go to change mode of PO, make a change in the the quantity, hit ENTER key, change back to the original quantity, THEN only Save the document. Try ME28 again.
b. Otherwise, you can try to re-create the PO by adopting the details again from the PR, but first flag the current PO for deletion first. See if this will help to solve the problem.
I have encountered this problem before, and the first method works.
Rgds.

SA delivery schedule release problem

Hi all,
I am created a schedule agreement (Type LPA) and created delivery schedule for it.
When I am trying to release the delilvery schedule using ME84, I am getting the follwing error.
Msg No 06/857 -> No message record found.
I created condition record through NACE for Allication area EL, output type LPET. Still the problem persists.
Require your suggestions.

How to release directly from ME38 ?
I tried in the path delivery sche > Edit > generate Forc Sche
but the msg below:
Error generating release against scheduling agreement (cause 2)
Message no. 06857
Diagnosis
The function module for generating a scheduling agreement release (forecast delivery schedule or JIT delivery schedule) has run up against an error, causing processing to be terminated.
In this case the cause of the error is 2.
*System Response*
The error may involve one of the following situations:
1: The nature of the error cannot be specified precisely.
2: The forecast delivery schedule or the JIT delivery schedule was generated but no message record could be generated.
3: A document type for which the functions "Generate forecast delivery schedule" or "Generate JIT delivery schedule" are not defined may be involved.
4: A material for which the function "Generate JIT delivery schedule" is not defined may be involved.
5: A scheduling agreement that has not yet been released by all persons responsible may be involved.
6: The factory calendar has not been maintained correctly.

MaxDB backup problem through Data protector

When I start the Online MaxDB database backup through Data Protector GUI the backup fails with error as below,
Normal] From: BSM@ttcsap10 "MAXDB_Online" Time: 6/17/10 4:30:49 AM
OB2BAR application on "ttcmaxdr" successfully started.
[Normal] From: OB2BAR_SAPDBBAR@ttcmaxdr "MAX" Time: 06/17/10 04:30:50
Executing the dbmcli command: `user_logon'.
[Normal] From: OB2BAR_SAPDBBAR@ttcmaxdr "MAX" Time: 06/17/10 04:30:50
Executing the dbmcli command: `dbm_configset -raw set_variable_1 OB2OPTS=""'.
[Normal] From: OB2BAR_SAPDBBAR@ttcmaxdr "MAX" Time: 06/17/10 04:30:50
Executing the dbmcli command: `dbm_configset -raw set_variable_2 OB2APPNAME=MAX'.
[Normal] From: OB2BAR_SAPDBBAR@ttcmaxdr "MAX" Time: 06/17/10 04:30:50
Executing the dbmcli command: `dbm_configset -raw set_variable_3 OB2BARHOSTNAME=ttcmaxdr'.
[Normal] From: OB2BAR_SAPDBBAR@ttcmaxdr "MAX" Time: 06/17/10 04:30:50
Executing the dbmcli command: `dbm_configset -raw set_variable_4 TimeoutWaitFiles=30'.
[Normal] From: OB2BAR_SAPDBBAR@ttcmaxdr "MAX" Time: 06/17/10 04:30:51
Executing the dbmcli command: `dbm_configset -raw BSI_ENV /var/opt/omni/tmp/MAX.bsi_env'.
[Normal] From: OB2BAR_SAPDBBAR@ttcmaxdr "MAX" Time: 06/17/10 04:30:51
Executing the dbmcli command: `medium_put BACKDP-Data[2]/1 /var/opt/omni/tmp/MAX.BACKDP-Data[2].1 PIPE DATA 0 8'.
[Normal] From: OB2BAR_SAPDBBAR@ttcmaxdr "MAX" Time: 06/17/10 04:30:51
Executing the dbmcli command: `medium_put BACKDP-Data[2]/2 /var/opt/omni/tmp/MAX.BACKDP-Data[2].2 PIPE DATA 0 8'.
[Normal] From: OB2BAR_SAPDBBAR@ttcmaxdr "MAX" Time: 06/17/10 04:30:51
Executing the dbmcli command: `util_connect'.
[Normal] From: OB2BAR_SAPDBBAR@ttcmaxdr "MAX" Time: 06/17/10 04:30:51
Executing the dbmcli command: `backup_start BACKDP-Data[2] DATA'.
[Critical] From: OB2BAR_SAPDBBAR@ttcmaxdr "MAX" Time: 06/17/10 04:31:45
Error: SAPDB responded with:
-24988,ERR_SQL: SQL error
-903,Host file I/O error
3,Data backup failed
17,Servertask Info: because Error in backup task occured
10,Job 2 (Backup / Restore Medium Task) [executing] WaitingT170 Result=3700
6,Error in backup task occured, Error code 3700 "hostfile_error"
1,Backupmedium #1 (/var/opt/omni/tmp/MAX.BACKDP-Data[2].1) Wrong file type
6,Backup error occured, Error code 3700 "hostfile_error"
17,Servertask Info: because Error in backup task occured
10,Job 1 (Backup / Restore Medium Task) [executing] WaitingT170 Result=3700
6,Error in backup task occured, Error code 3700 "hostfile_error"
[Normal] From: OB2BAR_SAPDBBAR@ttcmaxdr "MAX" Time: 06/17/10 04:31:45
Executing the dbmcli command: `exit'.
[Normal] From: BSM@ttcsap10 "MAXDB_Online" Time: 6/17/10 4:31:46 AM
OB2BAR application on "ttcmaxdr" disconnected.
[Critical] From: BSM@ttcsap10 "MAXDB_Online" Time: 6/17/10 4:31:46 AM
None of the Disk Agents completed successfully.
Session has failed.
[Normal] From: BSM@ttcsap10 "MAXDB_Online" Time: 6/17/10 4:31:46 AM
Backup Statistics:
Session Queuing Time (hours) 0.00
Completed Disk Agents ........ 0
Failed Disk Agents ........... 0
Aborted Disk Agents .......... 0
Disk Agents Total ........... 0
========================================
Completed Media Agents ....... 0
Failed Media Agents .......... 0
Aborted Media Agents ......... 0
Media Agents Total .......... 0
========================================
Mbytes Total ................. 0 MB
Used Media Total ............. 0
Disk Agent Errors Total ...... 0
But I have noticed the error is because of this line as below,
Executing the dbmcli command: `medium_put BACKDP-Data[2]/1 /var/opt/omni/tmp/MAX.BACKDP-Data[2].1 PIPE DATA 0 8'.
Actually it should execute the dbmcli command as
medium_put BACKDP-Data[2]/1 /var/opt/omni/tmp/MAX.BACKDP-Data[2].1 PIPE DATA 0 8 NO NO \" \" "BACK"
But I donu2019t know where to make changes so that when I start the backup through DP GUI it should use backup tool as u201CBACKu201D
But same DP backup specification is working through MaxDB Database Manager GUI.
Any solution appreciatedu2026
Thanks,
Subba

Hi Natalia,
Thanks for the reply...Please find the answer as below,
-> What is the version of Data Protector?
Data Protector 5.5
-> What is the version of the database?
SAP MaxDB 7.6
-> According your information you could use the DBMGUI to create the medium of u201CBACKu201D type and create the databackup using this medium. Correct?
Yes
The problems are with Data Protector GUI, not with MAXDB or DBMGUI. Correct?
Yes
Please let me know where to make any changes or any enviornment settings to be done in Data Protector GUI so that it will use the medium "BACK" as backup tool while i start the backup through Data Protector GUI.
Thanks,
Subba

SAP PS budget release problem

We are following MTO scenario and we are releasing SAP Project with save of Sales Order.
Later we are assigning(CJ30) and releasing(CJ32) budget in SAP Project, with budget release System status "NBUD" replaced with System status "BUD". But, some times SAP is not removing this "NBUD" tick. And later when user try to release PR or perform any other transaction they face error message for system status "NBUD".
You all are requested to suggest solution for this error.
Best Regards,
Vishal Kadia

Hi,
First understand the term availability control by going through SAP help and finalize when you want to activate the AVAC against your project.
AVAC can be activaed by 3 ways
1. Automatic activation during budget allocation in CJ30
2. Budget release through CJ32
3. Manual activation / background activation
Now in your case you are doing planning by using the activities i.e. 100000 now this is plan cost for your WBS / project.
If you have planned this cost for interal activity by using resources then it is REM. If you have PR then this commitment
now in this case system is updated Assigned value for the WBS / project as 100000
Assigned value = Commitment + REM + Actual
Now if your AVAC activation during budget allocation through CJ30 - syem will check that your budget value is equal or more than asigned value otherwise will thorw error i.e 100000 or more than 100000
If your AVAC activation is during budget release then your release value shoul be same or more than the assigned value otherwise will thorw error i.e 100000 or more than 100000
You can do the partial alocation of budget or release budget if you dont have any assigned values present in the system or have less than the project / WBS budget.
Hope you understand now.
regards,

Help please it is a printing problem through airport express from pc

Sorry I'm new on here too but I didn't get help with my last problem at all but I was able to figured it out on my own. No luck with the following problem though.
Here is the problem My printer works I can print from my Mac but not from my pc. It recognizes it and it says printing and the printer actually uses a page but it comes out clean/clear. I can print to this printer from my mac like I said but not from my pc. I have rebooted, restarted and deleted and installed the printer back again, but still nothing. I mean it works, it just doesn't print anything on the page. Just a blank page. The printer is connected to an airport express and it works and it has been restarted and everything. The printer was jump started too. It works great with my mac but my pc can not print to it. I have another printer connected to my airport extreme base and that one can be used by both my mac and my pc. It works just fine. So Why won't this other printer work with my pc but yes with my mac. Both printers are connected to the network through AEBS and AX through usb, Not directly to any computers. Both printers are HP photosmart allinone 2575 working just fine with both and HP 6210 officejet all in one printer working only with the mac. Remember it is responsive with my pc and it says printing and it actually grabs a page and prints it out blank. Oh and it does have ink, I have made sure.
Thank you so much for taking the time to look at my post. and I'm kinda new so Forgive me if I repeated myself too much, to get the message across. Any help would be greatly appreciated. Thanks once again.

I have used the website and attempted to add the printer manually. However, it still says "collecting printer status" under port 9100, or "printer offline" for port 9101. Do you have any other ideas? It works flawlessly on my wife's apple laptop.
Message was edited by: Mizzay

Iphone 4s bluetooth volume problems through Alpine HU

Having trawled through numerous reports of bluetooth problems with the 4S I have not found one which replicates my issue although I could have missed it.
Essentially I think my query boils down to " Does the 3GS output music, via bluetooth at a higher level than the 4S, assuming both using IOS5.0.1" .Because my new iphone 4S is much much quieter than my old 3gs and I want to establish whether this is a software problem or a faulty unit.
For the last couple of years I have been using a 3GS which paired perfectly with my Alpine CDA-9887/Bt400 stereo in the car, handled calls well and when playing music via the bluetooth input ( which it did exceptionally well) it was at the same sound level as the other inputs for a given vol setting, i.e. I could switch from radio, to disc to bluetooth withouth changing the volume.
Having just changed to an iphone 4S I have found that although the unit pairs ok and seems to handle calls well enough (although rather mushy sounding compared to 3GS) it is very quiet when using the ipod function via bluetooth.
Volume and sound quality are very subjective I realise but to give an indication of the problem, the Alpine head unit has a volume scale from 0-39. On all inputs (except with the 4S) a volume of 5 is fine for spoken voice, 12 good for music on the move 21 is very very loud pushing the cars speakers to the limit. These levels are approx the same when playing music through an iphone 3GS and an ipod touch via bluetooth.
By contrast the iphone 4S is inaudible at vol 5, needs 20 to be listenable to on the move and even at vol 39 sounds thin and about as load as a 3GS at vol18 so ful vol not possible from my iphone 4S
The main problem with this is that if you are listening to music from the iphone 4S then switch to the radio without remembering to drastically reduce volume it is likely to result in damage to the speakers and/or your eardrums. The problem is compounded as I use the TomTom app regularly and this exibits the same problem, the volume needs to be very high for instructions and then if I change input to listen to the news....ouch.
I have tried 2 iphone 3GS's and an ipod touch on this Alpine unit and they all work perfectly, being able to maintain the same output for a given HU vol level as the radio etc. I have tried increasing the bluetooth volume on the 4S handset, have tried clean restore to see if there is some obscure problem with my backup all to no avail.
Has anyone upgraded from a 3GS to a 4S and found the music level in a car via bluetooth much quieter, the same or louder and does this sound like a hardware problem.
thanks.

Funny Apple told me to eat **** and call my car place.
HELP !!!
It’s not like we are working with Samsun here. They should have thought it out fixed all the bugs then went ahead. I am...... ******! My 3 week old Volkswagen Tiguan no longer plays my MUSIC nor my Audible. Its so not ok. This is a breach of contract. I am told by apple you don’t have to update but my carrier said just the opposite our phones will not work without the updates...
Apple get you crap together, I had such respect you. You have let a lot of apple fans down.
A very ****** ex Apple Fan

Windows XP or Window 7 installation problem through bootcamp

Hi,
I tried to install Window XP through boot camp and successfully made partition, boot the xp cd and copies all the windows installation files on NTFS drive. After restarting system for installation it gives error system32/hal.dll file not found. Can you help in that regard.
2nd Question: Can I Install Windows 7 without any problem on my MacBook Pro.
3rd Question: I have installed Paragon NTFS to access NTFS drive from Mac OS but it doesn't work. It does not show any NTFS partition. Any other solution in that regard?

my experience with the hal.dll had more to do with creating partitions. I have 2 HD in my computer and I wanted to partition the second drive (because it is huge) into 2 and put winxp on one and win7 on the other.
The end result is that, for whatever reason, you cannot partition the drive the windows is on, or you will get that error. I don't know why this is. I tried partition first via bootcamp, partitioning in the XP setup and partition afterward using a tool to partition HD. In every case, as soon as I had partitioned the drive, I would get the hal.dll error.
Windows 7.
32 bit should be just like 32bit vista. If you're asking about 64 bit, then its a little different. The windows 7 64bit isn't supported by apple, and if you have an older mac, it won't install at all. I did find a solution to one of the possible errors. If you are installing win7 64 bit and get the error "select cd-rom boot type" then look up my post on that issue here on the apple forums.

Purchase Requisition Release Problem

Hi All,
I have a release procedure set up, and the strategy pulls up correctly when a PR is made. When I view collective release from ME55, the PR's show up, and I am able to release line items from that screen. However, when viewing the PR from ME53N, in the Release Procedure tab there is no green check next to the release code with which to release the line. Also, if I do release the PR from ME55, I cannot go to ME53N and cancel the release from the Release Procedure tab.
I am a user with all security access, so it is not an authorization role problem. The release group is also configured to release by line item, so that is not the problem. I have set up other release procedures which allow the release/cancel release function from ME53N before... what could be the problem this time?
Thanks,
J

hi.
There are two ways of releasing purchase requisitions:
Individual release (Tcode - ME54)
You release items of an individual purchase requisition or - if the requisition has to be released in total - by releasing one item you simultaneously release all the others.
Collective release (Tcode- ME55)
You release all requisition items or complete requisitions that are awaiting processing by your release code. This is the preferred method if you frequently have to effect release.
Display PR -with release status (Tcode-ME53N)
One can only see release status in ME53N & can not change release.
hope it helps to you.
Regards,
Rahul

Indesign install problem through CC

I have a desktop mac and installed all my apps with no problems. Desktop is running snow leopard.
I then wanted to install a few of them on my laptop (laptop running lion). I magaged muse and acrobat XI with no problem.
When I come to installing Indesign I get all sorts of problems.
It downloads OK but when it is going through the install process it completely hangs my laptop. Only fix is to switch off. I have tried this 4 or 5 times. I noticed that it was creating the Indesign CS6 folder in the apps folder but it did not have the icon on the folder. I even tried to uninstall it before trying again but everytime it just hangs the laptop.
I even left it running overnight to see if it just needed time but still the same result.
I have dowloaded the most recent version of Application Manager (6.2) but no joy.
Anybody got any ideas.
Thanks in advance, Keith

Moved to the Downloading, Installing, Setting Up forum. They will be able to help you.

How to create Bin Release folder Through commandline (without flash/flex builder)

Hi friends
is it possible to create bin release folder of my application without using flash builder or flex builder.i want to create the release of my application through sdk.is there any way to create this.i am working on windows.so please let me know any dos based command to create this release.
Thanks and Regards
Vineet Osho

Hi lee thanks for your reply.actually i am already use tha command but it cant create bin release folder it just make swf file.i want all bin-relase folder so that all the css and images and other resources that my application used should comme in relesed folder.is there any way to create bi-relese folder.i am working in flash-builder 4 and my operating system is windows 7
Thanks And Regards
Vineet Sharma

PO releasing problem through ME28

Similar Messages

Maybe you are looking for