PO replicated in ECC doesn't contain contract number

Hi All,
I'm using the Extended Classic Scenario; in the PO automatically replicated in ECC there isn't the contract number.
In SRM and in ECC I have the same contracts with the same numbers. Then if the ECC PO doesn't contain the contract number, only the SRM contract is used and the release value of the ECC contract isn't updated.
What can I do to import the reference to the contract number in the PO replicated from SRM in ECC?
Thanks in advance.
Best Regards.
Antonio.

Hi Antonio,
i am getting advantage of having contracts in two places, in ext-classical, the contract call-off takes place locally(SRM) and when PO created, it just replicated back to R/3. the contract reference is not pushed back.
However for reference purpose if you want to do , use the PO business add-ins, but this will require custom development.
Cheers, Renga

Similar Messages

Limit PO price changes are not replicated to ECC backend

Hi all,
SRM 5.0 ECS SP13.
When I change the value(increase/decrease) in limt PO which is already created(PO is changed for first time) and order the PO,under Overview screen.,the PO total value(at header level) shows the correct changed /new value while at the Item level,the Net price is shown as the old value!However when I go and check the item details,the field "VALUE" and "EXPECTED VALUE" have the changed/new value.
Because of the above issue,the PO changes are not replicated to ECC backend system.When I tested the BAPI BAPI_PO_CHANGE1 with the test data,there is no error mesasge in ECC backend system.
After this,when I change the PO for second time(again value increase/descrease),the total value and net price is shown correctly in SRM and changes are also replicated to ECC backend system!
I have also checked the cong for SPOOLPARAMETERS under Set Control Parameters and eveything is set correctly as shown below
SPOOL_JOB_USER     User that execueds spool job.     CUA_ADMIN
SPOOL_LEAD_INTERVAL     intervall by which the retrytime incr.     60
SPOOL_MAX_RETRY     Max. number of retrys for writing BAPIS     10
Can someone throw some pointers how to resolve the above issue.
Thanks in advance.

Hi
can you recreate the same issue
are you saying that
1. create a limit po for 100 USD and replicated to ECC AS 100 USD total value.
2 . now update the PO in SRM 150 USD and it was not replicated to ECC ?
or
1. limit sc
2. Limit PO
3. update not reached ECC.
Note 1284361 - Limits not transferred to backend purchase order
Symptom
Extended classic scenario.
You have ordered a purchase order with more than one hierarchy item containing a limit.The purchase order is created or updated in the backend system without errors but the limits are missing in the backend purchase order.

Does MV45AFZZ user exit trigger when CRM sales order is replicated into ECC

Hi All,
When a Sales order is created in CRM, it is replicated automatically using BDOCS from CRM into ECC.
I have requirement to code the logic during the process, when sales order is replicated into ECC.
So I need to know the BAPI which is actually triggered to create sales order in ECC, while replication takes place.
If I could atleast know, if USEREXITS in MV45AFZZ would trigger or not, when CRM order is replicated into ECC, then I could determine, If I could code my logic in those user exits.
Please help me on this.

please check this link
keremgomi=wordpress=com
Rgds
Raj

This disk doesn't contain an EFI system partition. If you want to start up your computer with this disk or include it in a RAID set, back up your data and partition this disk.

As stated above. I get this when I try to resize my HD. Was having issues with BootCamp so I removed it and got this.
This disk doesn’t contain an EFI system partition. If you want to start up your computer with this disk or include it in a RAID set, back up your data and partition this disk.

the same problem...
any help?

When trying to upload a MS word file (.docx) to gmail, it uploads into a folder that doesn't contain the original document when i try to download it from e-mail. how do i solve this?

when trying to upload a MS word file (.docx) to gmail, it uploads as a 'folder' that doesn't contain the original document when i try to download it back from the e-mail. how do i set the format to simply upload the document itself??? Thanks...

Yes, excuse me. attach a file. I have separate folders on my desktop to organize my word documents, so I'm guessing this might be a part of the problem. When I go to attach one of these documents into gmail, the resulting attachment is another folder icon (not the original organizational folders) with 4 subfolders containing a slew of .xml files reading things like "header.xml" "format.xml" "settings.xml" "style.xml" "contenttype.xml" There are also a few .jpegs and a small folder reading "word" as one of the subfolders.

Business partner(employee) is not replicated from ECC to CRM

The Business partner Not replicated in CRM.Two Sales organization have been maintained for the employee for the different time lines in ECC.Checked the BDOCs and the validation error occur in FM CRM_BUPA_MAIN_VAL .The BDOCs message was saying the BPGUID was missing .Could anyone please suggest what could be the root cause of the data not replicated from ECC to CRM.

Hi Pragnya,
This is the case where at the time of creation of BP there was some issue with replication.
The BP itself is not there in CRM or only the changes are not reflected?
In such scenarios, perform following steps for successful replication:
1. Go to TCode: CRMM_BUPA_MAP
2. Enter the BP no. {initially it says it does not exist}
3. Enter ERP customer no. and press enter, the BP GUID gets filled
4. Click on "Gather Information about customer" [you can see the status of the object]
5. Now again enter the BP no. -> The customer is available in CRM now.
Regards,
Swagi

Smart Collection bug with Title doesn't contain rule

Hi,
There are various articles on smart collections that check if the "Title" field is filled or not. Because the "Title" field doesn't have an "is empty" like function, the sugested solution is to use the rule:
Title   doesn't contain   a,b,c,d,e,f,g,h,i,j,k,l,m,n,o,p,q,r,s,t,u,v,w,x,y,z
But there is a bug in this rule. I found that the letter 't' is causing a problem. The letter 't' seems to include all characters.
Situation:
Four images that have a their Title field as follows:
Image 1:
Image 2: 2014-01 - Street Photography.dng
Image 3: 2014-01
Image 4: Some Image
(Image 1 has an empty title)
Four smart collections with the following rules:
Collection 1: Title   doesn't contain   a,b,c,d,e,f,g,h,i,j,k,l,m,n,o,p,q,r,s,t,u,v,w,x,y,z
Collection 2: Title   doesn't contain   0,1,2,3,4,5,6,7,8,9
Collection 3: Title   doesn't contain   a,b,c,d,e,f,g,h,i,j,k,l,m,n,o,p,q,r,s,u,v,w,x,y,z
Collection 4: Title   doesn't contain   t
My expected result of the smart collections is:
Collection 1: Image 1 and Image 3
Collection 2: Image 1 and Image 4
Collection 3: Image 1 and Image 3
Collection 4: Image 1, Image 3 and Image 4
The actual result of the smart collections is:
Collection 1: Image 1
Collection 2: Image 1 and Image 4
Collection 3: Image 1 and Image 3
Collection 4: Image 1
I'm using Lightroom 5.7 on a MacBook Pro 17" (mid 2010), i7 @ 2.66GHz, 8GB RAM and 2 x 240GB SSD's running on OS X 10.10.1
My questions are:
Can anyone, specially from the Adobe Lightroom team, confirm this?
How to solve this issue?
With kind regards,
Dennis
www.idemi.nl

That is a bizarre bug. There is an even simpler way to reproduce the problem: Have two pics, one with title "a" and the other with title "t". The criterion "Title Contains a" correctly shows just the first picture, but the criterion "Title Contains t" shows both.
Searching with smart collections and filters has numerous bugs, but this one is by far the most surprising. As a geek programmer, I'd love to know what causes this!
Adobe rarely reads this forum -- I suggest you post this in the official Adobe feedback forum, which Adobe does faithfully read (but only infrequently responds).

Publishing server doesn't work - error 'The request URL doesn't contain the query string for the client OS'

Hi,
I'm trying to setup an App-V environment in my lab.
I've used the App-V 5.0 Trial guide to help me configure all necessary components.
I'm able to install everything without error.
when come time to publish an app, it simply doesn't show up on my client.
after looking at events on the client and server, I found that the Publishing server is returning under Admin the following message.
'The request URL doesn't contain the query string for the client OS'
My setup is pretty simple.
App-V Server managament and Publishing on the same box
App-V database on my SQL server.
I'm able to see the publishing "webpage" by using http:://localhost:889.
It only display this :
-<Publishing Protocol="1.0"
<Packages />
</Publishing>
I've published one app from the management console.
any idea what could mean this error?
thanks

Hi,
thanks for the link.
I've validated the suggested debug steps. It seems that the problem is with my Publish server again.
I've looked in the web.config file. It seems to be missing some parts compare to the example provided.
Again, I've published an application from the management console. Management and Publishing are running on the same box, while SQL is remote.
Here's the web.config
<?xml version="1.0" ?>
- <configuration>
- <system.web>
<compilation debug="false" targetFramework="4.0" />
<machineKey validationKey="AutoGenerate,IsolateApps" decryptionKey="AutoGenerate,IsolateApps" />
- <authentication>
- 
<forms requireSSL="true" />
</authentication>
</system.web>
- <system.webServer>
- <modules runAllManagedModulesForAllRequests="true">
<add name="UrlRoutingModule" type="System.Web.Routing.UrlRoutingModule, System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
</modules>
- <security>
- <requestFiltering>
- <verbs>
<remove verb="GET" />
<add verb="GET" allowed="true" />
</verbs>
</requestFiltering>
</security>
</system.webServer>
- <system.serviceModel>
<serviceHostingEnvironment aspNetCompatibilityEnabled="true" multipleSiteBindingsEnabled="true" />
+ <behaviors>
- <serviceBehaviors>
- <behavior name="">
<serviceAuthorization impersonateCallerForAllOperations="true" />
<serviceMetadata httpGetEnabled="false" httpsGetEnabled="false" />
</behavior>
</serviceBehaviors>
</behaviors>
- <bindings>
- <webHttpBinding>
- <binding name="SecureBinding">
- <security mode="Transport">
<transport clientCredentialType="Windows" />
</security>
</binding>
<binding name="UnsecureBinding" />
</webHttpBinding>
</bindings>
- <protocolMapping>
<add scheme="http" binding="webHttpBinding" bindingConfiguration="UnsecureBinding" />
<add scheme="https" binding="webHttpBinding" bindingConfiguration="SecureBinding" />
</protocolMapping>
- <standardEndpoints>
- <webHttpEndpoint>
- 
<standardEndpoint name="" helpEnabled="true" automaticFormatSelectionEnabled="true" />
</webHttpEndpoint>
</standardEndpoints>
</system.serviceModel>
</configuration>

Does MV45AFZZ trigger when CRM sales order is replicated into ECC

Hi All,
When a Sales order is created in CRM, it is replicated automatically using BDOCS from CRM into ECC.
I have requirement to code the logic during the process, when sales order is replicated into ECC.
So I need to know the BAPI which is actually triggered to create sales order in ECC, while replication takes place.
If I could atleast know, if USEREXITS in MV45AFZZ would trigger or not, when CRM order is replicated into ECC, then I could determine, If I could code my logic in those user exits.
Please help me on this.

Hi,
I guess it should. Just put external break point (RFC userid with debuger rights) and see.
Thanks,
Nilesh P.

Storyboard doesn't contain a view controller with identifier 'myViewController'

I have 3 view controllers on storyboard. One of them has Storyboard Id as 'myViewController'. its runs perfectly on simulator. But when I try to run it on my device it gives following error:
'Storyboard (<UIStoryboard: 0x1cd626d0>) doesn't contain a view controller with identifier 'myViewController''
Please help me out with this.

I'm not sure how "new" you are to Xcode and IB, but just double checking -- did you create the XIB file from Xcode (so that it was added to your project?). Or, if not, did you save it to your project directory somewhere and were prompted to add it to your project? If you created it new from IB it may not be part of your project yet. That's when I have seen my classes missing from the drop down menu on the Identity Inspector.
One final thing -- after setting File's Owner, I don't see from your code how you are actually loading the NIB file (xib file). You are calling plain "init" in your app delegate where you create these view Controllers. You need to call the "initWithNibName" method. It is the designated init method for view controllers that load their interface from a NIB file.
Cheers,
George
Message was edited by: gkstuart

Error Occured while replicating to ECC

Hi There
I have created a RETURN Order in CRM 4.0. As per the process this order should get replicated to ECC. But i got the following error in CRM :
"An error has occurred in the system ECC while copying the document."
Now this order which is created in PRODUCTION server has to be processed further.
Kindly suggest.
Thanks and Regards
Dnyanesh

Dear Ashok,
I am also facing the same issue as my issue pertains the error "error has occured in the system( SYSTEM NUMBER)while copying the documentu201D .
Plz do needful support.
Best Reagrds

Can't start emCCR - JAVA_HOME doesn't contain java

Hi all,
Just a quick question regarding a problem I'm recently having with the Oracle Configuration Manager. I have it setup normally to run every fifteen minutes as is the default, I believe in Oracle's docs. However, it's now bombing out complaining that JAVA_HOME doesn't contain java. Problem is, JAVA_HOME is setup to go where it always has been and it is correct. JAVA_HOME is currently set to "/u01/app/oracle/product/10.2.0/db_1/jdk/bin". This has worked in the past. I don't understand why emCCR is suddenly not picking this up. It does that even if i run emCCR interactively from a shell, just by running "/u01/app/oracle/product/10.2.0/db_1/ccr/bin/emCCR start". This directly contains the java executables as it always has. Does anyone have any ideas or has seen this before? Seems very strange to me - any help would be much appreciated.
Thanks,
dave
Edited by: user2299875 on Sep 10, 2010 5:38 PM

Hi,
Before installing Oracle Configuration Manager, ensure that all the following pre-installation requirements are met:
•You must ensure that the required JDK version (1.2.2 or later on Unix, and 1.3.1 or later on Windows) is present in the ORACLE_HOME directory of the system on which Oracle Configuration Manager is being installed or the JAVA_HOME environment variable is pointing to the appropriate JDK directory.
•You must have your Customer Support Identifier (CSI) and your Oracle MetaLinkUserName with you as they are required when installing Oracle Configuration Manager in Connected mode.
•You must specify a valid Country Code when installing Oracle Configuration Manager in Connected mode. Country codes are associated with the Oracle MetaLinkUserName. Refer to the Oracle Metalink site (http://metalink.oracle.com) if you encounter registration failures and are uncertain that the correct country code has been specified. The country associated with the Oracle MetaLinkUserName can be found in the Profile section under the Licenses link. For a list of valid country codes,
see this link
http://stanford.edu/dept/itss/docs/oracle/10gR2/install.102/e10041/install.htm

Problems with smart collection "doesn't contain"

I have photos with keywords like
xxxxx, grand canyon,xxxxx
xxxxx, grand island, xxxxx
xxxxx, grand sable dunes, xxxxx
What I need is the abilty creat a smart collection that excludes grand canyon, but leaves in grand island, grand sable dunes
I can't get doesn't contain to work with
grand canyon
"grand canyon"
Any ideas?

Tudor asks, "What I need is the ability to create a smart collection that excludes grand canyon, but leaves in grand island, grand sable dunes".   Tudor wants to exclude "grand canyon", but include "grand island", "grand sable dunes", "red rock canyon", and presumably every other keyword except "grand canyon".
BKKDon's suggestion of
Match all: Keywords contains grand; Keywords doesn't contain canyon
doesn't quite work, because it excludes "red rock canyon".   A somewhat better query might be:
Match none: Keywords contains words grand canyon
The "contains words grand canyon" will match all images with the words "grand" and "canyon" in the keywords, and "Match none" inverts that and selects all other images.
But this still isn't right, because it will exclude an image having the two keywords, "Grand Island" and "Canyon Drive". As Rob explained, the Keywords criterion splits all the keywords up into "words", and then treats all the words in all the image's keywords as a single field to be searched.
Two possible workarounds:
- If you just want to manually exclude images with the keyword "grand canyon", use this recipe:
In the Keyword List pane on the right, click the arrow to the right of the keyword "grand canyon". This will filter just those images with exactly "grand canyon".
Select all the images.
Turn off the filter by clicking None in the Library Filter bar.
Do Edit > Invert Selection to select all the images that don't have exactly "grand canyon".
Add the selected images to the Quick Collection or another collection, if necessary.
- Use the plugins Space Urchin or Any Filter, as Rob suggested.
In general, LR's text-matching operators are a mess. Inexplicably, LR doesn't have exact match, the most basic keyword operator, and without exact match, it's difficult to work with a controlled vocabulary of keywords, as this discussion and many others have highlighted. Users repeatedly get all twisted up trying to understand how to use LR's weird text-match operators.

Bug: Smart Collection/Label text/doesn't contain

LR 2.1 & 2.2, 64-bit, Vista:
Create a smart collection using "Label text"--"doesn't contain"--"xxx".
The collection *shows* images with the "xxx" label text just as if the collection was created using "Label text"--"contains".
Produceable 100% of the time.
Any one else have the same problem?

That is a bizarre bug. There is an even simpler way to reproduce the problem: Have two pics, one with title "a" and the other with title "t". The criterion "Title Contains a" correctly shows just the first picture, but the criterion "Title Contains t" shows both.
Searching with smart collections and filters has numerous bugs, but this one is by far the most surprising. As a geek programmer, I'd love to know what causes this!
Adobe rarely reads this forum -- I suggest you post this in the official Adobe feedback forum, which Adobe does faithfully read (but only infrequently responds).

App folder in the dock doesn't contain all the apps in the main Applications folder

I have noticed recently that the App folder in the dock doesn't contain all the apps in the main Applications folder (the correct one under Macintosh HD).
This occurs whether in list, grid, automatic or whatever.
I've removed the apps folder from the dock and dragged in the current one and yet it doesn't show all the apps from the source folder.
Any ideas on why this is happening or how I can fix it?
There are 55 items in the Apps folder but only 51 are shown in the folder located in the dock.
If I drag it over (as per normal operation), all 55 should appear right?
Is there a limit on how many can be displayed?
Can the grid spacing/icon size be changed to fit them all in if that's the case?
Just dunno why this is happening???
Cheers
Frank
Mac i5 / OS X 10.6.8

Not sure this is what you want, but if you are an admin user, try this instead. Right-click on /Applications (Applications in the hard drive icon folder, the root folder, not Applications in your user) and select Make Alias, then drag that alias into the Dock to the right of or below the divider (the Trash icon is in that area.) Your Applications will now open from that alias in the Dock. The "original" alias will remain in that location, while creating a new Applications folder in the Dock. I have done this for my home folder, Utilities, and Downloads as well.

PO replicated in ECC doesn't contain contract number

Similar Messages

Maybe you are looking for