PO Report by PO creator's name

Hello!
Is there any way (other than the Document Overview Method and the EKKO Database Table Method) wherein a PO report can be generated along with the PO creators name.
Thanks in advance.
Riju.

Hi!
Thanks.
Yes. That's true. But what if I don't know the SU01 names of any of the PO creator's beforehand.
For example, if i wish to take out the list of all the POs in a company code with the PO creator's name, but I don't know the names beforehand.
Thanks and Regards,
Riju.

Similar Messages

How to create reports servers with the same name in two nodes in Reports

Greetings
We are migrating Oracle Application Server 10g (9.0.4) to a better hardware infrastructure with high availability. We want to provide 2 new Oracle Application Server 10g (9.0.4) in High availability and we want to avoid modify the existing forms and reports code, but the code is looking for a specific reports server name when calling reports, but I couldn't create the same reports server name in the both oas machines, I could create the reports server in only one node. I want to create a reports server with the same name in both nodes but it is not possible. I know that there is a procedure to do that in 10.1,2 (Note 437228.1, How to Create Two Reports Servers With the Same Name in the Same Subnet) but I couldn't find the equivalent procedure in 9.0.4.
Anybody kwows how to create a reports server with the same name in two nodes using 10g (9.0.4)
Thanks
Ramiro Ortiz.

Hello.
I applied the patch 4092150 on my oas 9.0.4.2 and I modified my rwnetwork.conf file changing the port to 14022 by following the note "How to Create Two Reports Servers With the Same Name in the Same Subnet? [ID 437228.1]" but I am facing the same error rep-56040 "server already exists in the network".
When I run osfind command I get the following information (My reports server is senarep and I want to create it on SNMMBOGOAS10):
osfind: Found 2 agents at port 14000
HOST: SNMVBOGOAS10.sena.red
HOST: SNMVBOGOAS09.sena.red
osfind: There are no OADs running on in your domain.
osfind: There are no Object Implementations registered with OADs.
osfind: Following are the list of Implementations started manually.
HOST: SNMVBOGOAS10.sena.red
REPOSITORY ID: IDL:oracle/reports/server/EngineComm:1.0
OBJECT NAME: senarep2
REPOSITORY ID: IDL:oracle/reports/server/ServerClass:1.0
OBJECT NAME: senarep2
HOST: SNMVBOGOAS09.sena.red
REPOSITORY ID: IDL:oracle/reports/server/EngineComm:1.0
OBJECT NAME: senarep
REPOSITORY ID: IDL:oracle/reports/server/ServerClass:1.0
OBJECT NAME: senarep
Any Ideas?

Error generating report job with the task name 'FSRM_Report_Task

Since this morning we have been having a problem with FSRM on Windows Server 2008 R2, it is no longer running storage reports (both scheduled and on-demand).
We get the following in the event logs:
Log Name: Application
Source: SRMREPORTS
Date: 09/06/2014 08:09:55
Event ID: 752
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: FILESERVER2.curriculum.riddlesdown.local
Description:
Error generating report job with the task name 'FSRM_Report_Task{3add1760-4e79-4141-baba-cb53391bef3e}'.
Context:
- Exception encountered = Invalid argument: StorageType = '101'
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="SRMREPORTS" />
<EventID Qualifiers="0">752</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-06-09T07:09:55.000000000Z" />
<EventRecordID>42920</EventRecordID>
<Channel>Application</Channel>
<Computer>FILESERVER2.curriculum.riddlesdown.local</Computer>
<Security />
</System>
<EventData>
<Data>Error generating report job with the task name 'FSRM_Report_Task{3add1760-4e79-4141-baba-cb53391bef3e}'.
Context:
- Exception encountered = Invalid argument: StorageType = '101'
</Data>
</EventData>
</Event>
We have uninstalled and reinstalled the FSRM role service but are still having the same problem.
Anybody have any ideas?

Hi,
From the error message, it failed because of "invalid argument: storagetype = '101' ".
101 means the storage type is "system" + "cache". Is there any change on your storage before the issue occurs? For example whether the source storage is changed?
FsrmStorageModuleType enumeration
http://msdn.microsoft.com/en-us/library/dd392346(v=vs.85).aspx
If you have any feedback on our support, please send to [email protected]

Missing functionality Request: report "last prices" with BP name

In the report "last prices" (if Checkbox "BP code" is not checked) one sees only the GP code and not the BP name. This is very unfavorable if an item was very often sold in several customers.
Edited by: Inga Babco on Jan 31, 2008 10:27 AM

I am not using form , it's just done in report, that is i am not calling the report from a form , just from a menu.
:last_name is a report_paramter that i created on the report.
you're right the first assignmnt is
AND UPPER( db column) LIKE
I have a paramter form on the report with a field last name and I am letting the user enter last name there which gets stored in the :last_name
Edited by: Forms_Reports_Beginner on Aug 14, 2009 7:29 AM
Edited by: Forms_Reports_Beginner on Aug 14, 2009 7:32 AM
Rodolfo,
your solution works,
:p_where_clause := ' AND UPPER( db_column ) LIKE (' ||''''||'%'||UPPER(Replace(:p_2,chr(39), chr(39)||chr(39)))||'%'||''''||')' ;
but i dont quite understand how this is working
Replace(:p_2,chr(39), chr(39)||chr(39))
i have never used chr
Edited by: Forms_Reports_Beginner on Aug 14, 2009 7:35 AM

Daily check report to list the vendor name, material, quantity

hi friends,
can you help me to write daily check report to list the vendor name, materials and quanitity?
thanks in advance

HI ,
What do you mean my daily check report..
Do you want to see the status of the PO sent to a Vendor on a daily basis..
Thanks
Mahesh

Most Popular Items Report: items listed in report are not the document names or titles

I have a document library that's loaded with typical corporate ppt, word, and pdf files. When I run a Most Popular Items report on the library, the list of items displayed in the report are not the document file names or document titles.
Instead, the report is showing information that seems to pulled from within the content itself.
For example, there's a new corporate ppt template in the document library and the Most Popular Items report shows the sharepoint url for the ppt file as being one of the most popular items. Let's say that the file is named Standard_ppt_template.ppt.
The url for one of the most popular items reflects that in the URL. However, the item is listed in the Most Popular Item as "Company Confidential". The report seems to be pulling the words "Company Confidential" listed in the
footer of the ppt template and showing that as the most popular content item.
Is there a reason or setting why the Most Popular Items report is not returning a list of items based on either the file name or the document title?
Thanks in advance for any advice.

Hi,
According to your post, my understanding is that the PPT files items in the “Most Popular Items” report display these items’ names seem to be pulled from the PPT files’ content.
Per my test, the Word, Excel, PDF, .txt, .png files items in the “Most Popular Items” report will display these items’ names based on the corresponding items’ title value if they have, or the corresponding file name if these items don’t have the title value.
However, it’s by design that the PPT files items in the “Most Popular Items” report will display these items’ names only based on the beginning of these PPT files’ content rather than these files’ names and the corresponding items’ title value.
Best Regards,
Yumi Fu

MBAM 2.5 Reports Fail with "Invalid object name 'v_GS_MBAM_POLICY'."

Utilizing the SSRS Reports for MBAM 2.5 Integrated into Configuration Manager 2012 R2 Cu3, when I run the reports it states that the view
'v_GS_MBAM_POLICY' does not exist.
The complexing thing though is that there are computers that are reporting the HINV Class called 'Win32Reg_MBAMPolicy' So I would think this view would have been created.
Does anyone know the process by which the view gets generated since my HINV is reporting back the information, yet the view has not been created in the DB yet... It makes no sense.
The error is:
Microsoft.Reporting.WinForms.ReportServerException
An error has occurred during report processing. (rsProcessingAborted)
Stack Trace:
   at Microsoft.Reporting.WinForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.AsyncMainStreamRenderingOperation.RenderServerReport(ServerReport report)
   at Microsoft.Reporting.WinForms.AsyncRenderingOperation.PerformOperation()
   at Microsoft.Reporting.WinForms.ReportViewer.AsyncReportOperationWrapper.PerformOperation()
   at Microsoft.Reporting.WinForms.ProcessingThread.ProcessThreadMain(Object arg)
Microsoft.Reporting.WinForms.ReportServerException
Query execution failed for dataset 'ComplianceDetails'. (rsErrorExecutingCommand)
Stack Trace:
   at Microsoft.Reporting.WinForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.AsyncMainStreamRenderingOperation.RenderServerReport(ServerReport report)
   at Microsoft.Reporting.WinForms.AsyncRenderingOperation.PerformOperation()
   at Microsoft.Reporting.WinForms.ReportViewer.AsyncReportOperationWrapper.PerformOperation()
   at Microsoft.Reporting.WinForms.ProcessingThread.ProcessThreadMain(Object arg)
Microsoft.Reporting.WinForms.ReportServerException
Invalid object name 'v_GS_MBAM_POLICY'.
Stack Trace:
   at Microsoft.Reporting.WinForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.AsyncMainStreamRenderingOperation.RenderServerReport(ServerReport report)
   at Microsoft.Reporting.WinForms.AsyncRenderingOperation.PerformOperation()
   at Microsoft.Reporting.WinForms.ReportViewer.AsyncReportOperationWrapper.PerformOperation()
   at Microsoft.Reporting.WinForms.ProcessingThread.ProcessThreadMain(Object arg)
David Baur

We ran into this error as well. Turns out that MBAM-provided reports to SCCM 2012 fail with an error unless the Win32Reg_MBAMPolicy class is added to SCCM, which also updates the SCCM SQL with required Views, including "v_GS_MBAM_POLICY".
The solution that we finally came up with was to import an updated MOF file to include the BitLocker Policy (Win32Reg_MBAMPolicy) class into the "Hardware Inventory" section of the Default Client Policy. Once the import is complete SQL also gets
the appropriate view created.
The instructions on how to create and import the MOF file can be found in the link below.
http://technet.microsoft.com/en-US/library/dn237295.aspx
Chris Keene
Product Specialist at Wave.

OBIEE - edit report entities like title, column name, decimal places

Hi all,
How do I edit OBIEE report entities like title, column name, decimal places?
I know I can edit column name in repository, but I hope I can do it also at report level.
As you can see, year looks like "2012.00", I don't need these zeros after "2012", how do I edit it?

Using Criteria tab
Column Properties->Data Format->Override Default Data Format
You may go for Save button to make it catalog level for that column
Edited by: Srini VEERAVALLI on Dec 7, 2012 10:57 AM

What happens to Desktop Intelligence reports when a universe changes name?

Post Author: GregPye
CA Forum: Desktop Intelligence Reporting
Hi
We are experiencing intermittent issues with our DeskI reports that are pointing to a universe that subsequently changes its name.
We seem to have some reports that cope with the name change perfectly well, and other reports that "cannot find universe" because it is looking for the new name.
The issue with the latter, is that if DeskI cannot find the universe, it will then not allow you to repoint the universe in the View Data pane. When such reports are found, our workaround has had to be:
1) copy universe and rename with old universe name
2) open report and repoint to newly named universe name
3) delete old universe name
Should all reports automatically update when the universe simply changes their name? Why do some reports not do this? Is there something we can do to alleviate the situation?
Many thanks
GP

bashphoenux wrote:what does "this" refer to ???
I was referring to the problem you reported "the screen freezes for an idefinite amount".
I thought it sounded like this:
https://bbs.archlinux.org/viewtopic.php?id=103522
Look at the mail mesage in the link in the 4th post.
Last edited by loafer (2010-09-07 15:15:27)

Need report to list the system name, client status, client version, OU name info for a particular collection of systems

Hi Friends,
Need report to list the system name, client status, client version, OU name info for a particular collection of systems.
Please help as it would be appreciated much as i am not familiar with creating custom reports in SCCM. Thanks.
Regards,
Thangaraj

Select v_R_System.Name0, v_R_System.Client_Version0, v_RA_System_SystemOUName.System_OU_Name0,
case when v_R_System.Client0 = '1' then 'Client is Installed'
else 'Client Not Installed'
end as 'Client Status'
FROM v_R_System JOIN v_RA_System_SystemOUName ON v_R_System.ResourceID = v_RA_System_SystemOUName.ResourceID WHERE System_OU_Name0 LIKE '%HR'
John Marcum | Microsoft MVP - Enterprise Client Management
My blog: System Center Admin | Twitter:
@SCCM_Marcum | Linkedin:
John Marcum

Is it possible to suppress the Page Header of the Main Report based on the Section Name?

Hi,
I am fairly new to Crystal Reports XI. Is it possible to suppress the Page Header of the Main Report based on the Section Name? Thanks.

In the section expert you can enter a formula on the suppress function.
You just need something to check against if it is section name you say
{section name} ="Suppressme"
I have used it more in drill level to display headers based on how far you have drilled into a report.
Hope this helps
Eric
Via Christi Health System

Custom report to disvover duplicate login name and computer

Hi all,
I need to create a custom report which shows a same login name use on many computer in ZAM 7.5.
could you please help me to choose the good option on a custom report creation ?
Thank all,
Frnchtch

Here's one method using the Custom reports console. Not the best mind you but quick to setup if you just need results on who the dups are.
Go to Custom reports
Select New Report (Type = Workstation; Focus = Basic workstation attributes)
In column selection place "Login Name"
In summary criteria select "Workstation Instances (Summary) > 1
Save with a name like "Duplicate Logins
Run report
HTH,
Bryant

Report for Production orders with name of Customers

Dear Expert,
Kindly suggest to view the production orders with customer numbers for which the sales orders is created.
I tried in MB51 with layout settings but the customer number comes out be blank despite the sales order number is populated for an production order.
Kindly suggst a way or any report in the system to get the corresponding information of production order number and corresponding customer name mentioned in the sales order .
Thanks in advance for your help and inputs..
Best regards,
Nitish jain

Nitish,
MB51 is a Material Document list. Many production orders exist that have no entries in this report, so it would be an unlikely candidate to be a solution for your requirement..
The standard production order reporting tool is COOIS. The output for MTO orders can be configured to display Sales order and Item and Soldto.
Obviously, displaying even the customer order number in COOIS is impossible in a MTS scenario.
In addition, a user experienced in using SAP Query (SQVI or SQ01/SQ02/SQ03) could also create a production order report without having to know ABAP, by properly linking tables AFKO, AUFK, AFPO (production order data) with VBAK (sales order header data) to get customer number, and KNA1 to get customer name..
If you are not expert in SAP Query, I suggest you discuss this requirement with a local ABAPer.
If you are feeling like educating yourself in the wonders of SAP query, try this doc. Although old, SAP query hasn't changed very much since this document was written.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVQUE/BCSRVQUE.pdf
Rgds,
DB49
Edited by: Dogboy49 on Apr 20, 2010 10:47 PM

Report for vendor no., vendor name for good receipt documents on KSB1

Hello,
My client needs vendors on KSB1 report. I told them about offseting account, but it doesn't show vendor for good receipt documents.
Is there any place else they can view vendor, vendor name for those good receipt documents .
Any MM report or AP report .
Thanks,
T.G

Hi,
Please go to FBL1N, In Dynamic Selection give document as "WE", this will give and enable Purchase Order Number
This will give you Vendor Name, Purchase Order and FI Document number or u can try MB51, there you will not get Vendor Name, but you will get Vendor Code, Material Document Number and Purchase Order Number
Br,Vivek
Edited by: View_taurian on Oct 22, 2011 12:01 AM

Automatic Report Bursting based on column names given by user as parameter.

Hi,
Could some help me achieve the following functionality. The requirement are:
1. create a report that has parameters that are column names (display values e.g: department, location, employee job code)
2. the end user will select one or more columns from the multi-select parameter
3. we want that there should be a button on clicking that the user should get automatic file bursting. He should not be required to go to schedules tab and create a new job for that.
4. the report should burst to a file location depending on the columns selected by the user, e.g. if user selected department and location then we should have files saved in the set file location as sales-india.pdf, sales-us.pdf, hr-india.pdf, hr-us.pdf and so on.
I am new to BI Publisher.
Could you help me in creating such a parameter, what should be report sql for capturing the data from parameter and then doing report bursting automatically based on two or more parameter values given by the user.
There is no need to show the report to the user in BI Publisher as there are thousands of rows in a table. Three tables join to give the employee data.
-Priyanka

Thanks for a quick response but I am still not clear on
1. how to do this using custom java code
and
2. actually user would login to interactive dashboard and there he will give these parameters using which we need to automatically burst a BI publisher report. Can this be done some how?
-Priyanka

PO Report by PO creator's name

Similar Messages

Maybe you are looking for