PO Restriction if no version triggered

Dear All,
How to restrict the user from saving the PO if there is no Version tab in PO. Like in some cases without version (even 0 version also) PO gets saved.
The user enters all the field in PO and at last by mistake clicks the cursor on the doc type and presses space in order to change the document type before entering the correct document type. System in the same moment removes the version tab in that po and after user selects the correct document type immediately saves the PO.
At the time of saving system should check whether Version is been triggered or not.
Please let me know the badi or userexit for restricting it. We tried it with badi ME_PROCESS_REQ_CUST but couldnt able to get.
Please suggest....

Hi,
Set the Version zero,
when you create any new PO then version zero will get defaulted for the combination maintained,
The user enters all the field in PO and at last by mistake clicks the cursor on the doc type and presses space in order to change the document type before entering the correct document type. System in the same moment removes the version tab in that po and after user selects the correct document type immediately saves the PO.
Please Note that Version Management will work on combination of Doct category/doc type and pur org, Please check do you have that combination
Thanks

Similar Messages

Are Disc Menu Templates Restricted to Certain Versions of Premiere Elements

I ask this question after visiting the movipix site to look at what templates I might add to my PrE 9 program. This got me to wondering if templates are restricted to certain versions of PrE. After reading various posts in this forum I thought I was getting the message that any templates from Premiere Elements 4 to Premiere Elements 10 were interchangeable. It was a matter of inserting the subfolder from one program into the category folder of another program?
If I were to order a template from the movipix website would I have to check to make sure which versions it would work in? I read where version 9 had some problems with some templates that would not allow menu background video or pictures to show up on the burned dvd even though it was in preview before burning. AT Romano had played with some of the templates but I never could find out if the problem was resolved by Adobe.
Thanks

ATR,
Thank you for your response. A wealth of information. Quite a bit of it I had already read. You've gone to a lot of work. Of most interest to me were a couple of posts. One in this forum "Using Disc Menus from Premiere Elements 4 in Premiere Elements 12". (Sorry I didn't copy the message #). The other detailed post was in Elements Village Premiere Elements forum. http://www.elementsvillage.com/forums/showthread.php?t=73006&highlight=templates+folder
These posts are explaining pretty much how to install additonal templates, either between versions, or downloaded templates? Very good. One question on the Elements Village post though. You mentioned deselecting "Read Only" in the properties dialog box of the folder to be transferred. Is this only necessary if transferring from one computer to another? or should this be done when transferring from one PrE version to another within the same computer?
I think you have answered my question on using menu templates across the board from PrE version 4 thru 12. Just a matter of getting them in the correct folders as you have pointed out in your various posts. And it appears that only PrE 9 had the issues that didn't get fixed by Adobe as far as menu background & audio not getting burned to disc?
To give more details on the Menu and Scene Selection buttons. I should have said PLAY ALL instead of Menu. I did not modify them. I merely dragged the Play All button to the bottom left and the Scene button to the bottom right of the Main Menu page. The arrows pointing to them went along with the text. But on the burned DVD they seem to be reversed when the arrow is highlighting the choice to be made. Play All selects Scenes and vice versa. I probably won't be using this template again anyway but was interesting.
Not sure where to post this next question. Is there a way to start a post? where members can list a few of their favorite Disc Menu Templates that they use all the time? Kind of a vague question but I'm guessing out of all of the available templates in each of the versions of PrE only a few get used over and over. As the list would grow people could vote (?) on various ones and some kind of master list might be produced for future use or download. For example: PrE version (or a downloaded version like from Movipix ) used, templates used, categories (ie:general,entertainment, etc.) It seems as though a new version introduced adds some templates and takes some away. Then people are left looking or trying to figure out how to replace them (such as transferring them as we have been discussing)
Thank you for your time

Restricted or Unrestricted version - how to confirm

I just took over a customer environment of Unity Connection 8.5 globally. I need to confirm if any of these clusters have UNRESTRICTED software.
Im hoping it is all RESTRICTED, however they have asked for confirmation. Can someone please tell me how i can confirm this, either from the CLI or webpages? I can not located the software which was used for the installations.
Thanks.

Hi,
show cuc version will indicate if it's UNRESTRICTED. If you don't see anything specified, then you're running RESTRICTED.
Hope that helps,
Brad

Comment réinitialiser le code de restriction sur ipad (Version 5.1.1)

Bonjour,
aprés mes multiples recherches, je me rend compte que je ne suis pas tout seul à avoir oublier cette saloperie de code de restriction installé un soir à la va-vite pour empecher mes enfants d'avoir accés a certaine applis et bien sûr quelques mois plus tard impossible de me rappeler cette @#&!! de code.
Malgré les nombreux postes (majorité en anglais) consultés je n'ai pas trouvé de solution à mon probléme alors si une âme bien veillante connaissant la solution pouvait se pencher sur mon probléme .... ben ça serait super cool d'avance merci

La seule solution sera, tout effacer.
Essayez ces étapes
iOS : mise à jour ou restauration impossible
http://support.apple.com/kb/HT1808?viewlocale=fr_FR
Passer votre appareil en mode de récupération
Suivez les étapes suivantes pour passer votre appareil iOS en mode de récupération. Si votre appareil iOS se trouve déjà en mode de récupération, vous pouvez immédiatement passer à l’étape 6.
Déconnectez le câble USB de l’iPhone, l’iPad ou l’iPod touch, mais ne déconnectez pas l’autre extrémité du câble du port USB de votre ordinateur.
Éteignez l’appareil : appuyez sur le bouton Marche/Veille et maintenez-le enfoncé pendant quelques secondes jusqu’à l’apparition du curseur rouge, puis faites glisser ce dernier. Patientez jusqu’à ce que l’appareil s’éteigne.Si vous ne parvenez pas à désactiver l’appareil avec le curseur, appuyez simultanément sur le bouton Marche/Veille et le bouton principal et maintenez-les enfoncés. Lorsque l’appareil s’éteint, relâchez le bouton Marche/Veille et le bouton principal.
Tout en maintenant le bouton principal enfoncé, reconnectez le câble USB à l’appareil. L’appareil devrait s’allumer.
Remarque : si l’écran ci-dessous s’affiche, laissez l’appareil se recharger pendant au moins dix minutes pour vous assurer que la batterie est légèrement chargée, puis passez à nouveau à l’étape 2.

New restrictions on iTunes version for connection to iTunes U / Store?

I use a dedicated system for processing data in via applescripts with iTunes/Quicktime Pro etc which has been working fine up until today. Now it won't connect to iTunes store.
Is the current version of iTunes required to make connection?
My other machines with current iTunes v work fine.

I'm running 6.05 in production due to the changes in the data structure in the 7 revisions of iTunes.
My scripts identify files in the library while processing them into mp3 and m4b audio files.
But the current store changes are accross the board, I'm assuming for iphone and other Apples sales related content.
The iTunes U side of things is like a forgotton relative sometimes. I realize you've got to take care of business and that this part is a gratis.

Need to restrict triggering of workflow only once(first time).

Hi guys,
I hv a requirement to trigger the workflow only once(first time).
whatever is the the condition/changes in document, it should not trigger for second time.
do we hv any options available for this........
thanks in advance...
santosh.

Hi susan,
Below is the requested information,
Release : ECC 6.0
we are working on custom WF for ECO creation(CC01).
Description,
ECO is created in SAP by legacy system, thru bapi CCAP_ECN_CREATE, the WF will take the editing of the material in that ECO to different departments like MRP, accounting, sales,quality etc.... & respectively creates the views.
we cannot use CREATE event, bcos first the ECN(CC01) is created by bapi & further bapi creates the material & inserts it into ECN again, which is CHANGING the document. once this is done, our WF should trigger.
As we dont have CHANGE event in ECM BO, i am using CREATE event & settting it for ON CHANGE in SWEC t-code.
Bottomline is , it is triggering as soon as any changes happens.
But, we want it to restrict for one time triggering.
Regards.
santosh.

Restriction SSID Per User with ACS 5.x version

Hi
I would like to ask some question on WLAN technology, which I using WiSM version 2. And i get requirement that user must be restrict with SSID, so, i found that it can do it on ACS version 4.x via NAR for SSID-based authentication feature. Then, is it possible to do restriction on ACS Version 5.x?
Please give me the idea or help
Thanks

There is a guide how to achieve this with ACS4.2:
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00807669af.shtml
(you probably know that one)
This is also working with ACS5.x, maybe this can help you:
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.2/user/guide/pol_elem.html#wp1074194
Be careful when configuring a DNIS in ACS5, maybe you are hitting CSCtk16271 (but there is an easy workaround, so this will definitely work!)
Regards
Stefan

Database Links and Triggers

Hello altogether,
I'm not sure if I am in the right topic here, if not please excuse!
I got the following problem:
My system consists of two parts - one calculation part P1, and one output part P2. Both parts have their own Oracle DBMS. The calculation part P1 calculates a lot of data and replicates this data to the database of the output part P2.
I created a database link from P1 to P2.
Now I used triggers to replicate the data from tables on P1 side to tables on P2 side.
Problem:
This works fine, as long as the number of inserted or updated entries is low. If it increases, I get the error "Too many database links in use", and everything is stuck. I guess this is because too many triggers fire in parallel.
Question:
Is there a possibility to restrict the number of triggers executed in parallel (some kind of semaphor to serialize on), or can multiple triggers share the same database link?
Thanks a lot for your help!
Bye,
Daniel

Besides from using normal oracle replication I would check your triggers.
Do they fire and access the DB for each row? May change this to statement level.
Or switch from some synchonous process (immediatly update the target database) to some asynchronous process (mark the records that needs to be updated/changed, every half an hour do the change).
3rd version? DO you really need two databases? Consider 2 separate schemas on one database instance.

Problem using TAPI triggers and merge statement

Hi,
I use Designer tapi triggers on a table. When I try to execute a merge statement, I get the following error:
ORA-06502: PL/SQL: numeric or value error: NULL index table key value.
Is there a restriction when using TAPI triggers and merge statements that anyone is aware of?

No restrictions on MERGE commands that I know of. I have, however, seen the TAPI give inexplicable ORA-06502 errors. It would help to know what line in which procedure or trigger gave the error. That information should have been in the error stack.

Absences Restriction in Oracle Hrms R12.1.3

Hi Friends
Recently we have applied the latest patch R12.1.3 .. and i read some where that by in the oracle R12.1.3 we can restrict the absences.. and for the restriction in that version it is given seeded package HR_RESTRTICTED_PKG.
in this package i have passed my requirement but i am unable to restrict the absences according to the client requirement..
can anyone please help me out in this..
for your information i am keeping the package which i wrote for the restriction of absences..
CREATE OR REPLACE Package Body hr_absence_restricted as
/* $Header: peabrest.pkb 120.0.12010000.4 2010/03/18 10:25:49 ghshanka noship $ */
-- |----------------------< absences_restricted >--------------------------|
function absences_restricted(selected_person_id in varchar2,
          login_person_id in varchar2
          )return varchar2 is
l_respid number;
l_abs number;
l_return number;
begin
----     NULL;
/* Example code logic
     if to_number(selected_person_id) = 36003 then
          return '31044,31045';
     end if;
if to_number(selected_person_id) is not null
then
----     BEGIN
cursor res_cursor is select RESPONSIBILITY_ID
                              from FND_USER_RESP_GROUPS_DIRECT furg,
                                   per_all_assignments_f paaf,
                                   fnd_user fu
                              where selected_person_id = paaf.person_id
                              and paaf.person_id = fu.employee_id
                              and fu.user_id = furg.user_id
                              and trunc(sysdate) between paaf.effective_start_date and paaf.effective_end_date;
cursor c1 is select ABSENCE_ATTENDANCE_TYPE_ID
               from PER_ABSENCE_ATTENDANCE_TYPES
               where BUSINESS_GROUP_ID = 162 and ABSENCE_CATEGORY = 'WP';
     begin
               for j in res_cursor loop
               l_respid := RESPONSIBILITY_ID;
               if l_respid = 20536 then
               for i in c1 loop
          l_abs:=i.ABSENCE_ATTENDANCE_TYPE_ID;
               l_return := l_abs;
                    end loop;
               else
                    l_return := '-1';
end if;
          end loop;
     return l_return;
     else
     return '-1';
     end if;
     end;
end absences_restricted;
end hr_absence_restricted;
/

Hi,
Please see if (How To Restrict Absence Type LOV in Oracle Self-Service Human Resources [ID 1122674.1]) helps.
Thanks,
Hussein

Version Management for PO(Set up Change Displays)

Hi All,
We have Version Mgt. functionality for POs.
Pls tell me what is the use of 'Category' field in 'Set up Change Displays' in Version Management.
The path is IMG>MM>Purchasing>Version Mgt.>Set up Change Displays
Appreciate if you do not provide the explanation which comes by pressing F1. Jst let know how we use this field in this functionality and how.
Thanks in advance.
Regards

Dear ,
The sole purpose of the field Category i.e Data output category is reporting ,Which means when you check the report of Display Changes for a version in PO it will show you all the fields (as per SAP all fields are of same importance ) but if you want to impose importance to those fields according to your need then you assign a category and later you can sort the list based on this category
Now how it works lets take an example
Suppose you create a PO take print out and then changed few data in PO so new version triggers -> Mark this version as completed and saved the PO
Now after that your boss or any one want to see what changes you have made for that PO so he select version 1 in header and click on Display changes
Field........................................old value.......New value.......Changed by......Changed On....Category
1> Price ................................100 EUR.......120 EUR...........user1234..........18.02.12................A
2> Quantity .............................60 EA.............65 EA...........user1234..........18.02.12................A
3> Material short text ............Iron ore-1....Iron ore-2..........user1234..........18.02.12................B
4> Requisitioner ....................User4.......... User 5.............user1234..........18.02.12................B
5> Req. tracking no...............need543.......need579...........user1234..........18.02.12................C
6>   Taxcode ...........................V1..................V2...............user1234..........18.02.12................C
{If in the standard output format category field is missing you can bring that by changing the layout }
Now out of these 6 field you assigned Price and Quantity as category A (say most important)
Material short text and Requisitioner as category B (Medium importance)
Req. tracking no. and   Tax code as category C      ( Less importance)
So it just an additional information for you to categorized and easily identify important fields among many other changed fields.
Now I sincerely hope it clarifies you doubt
Edited by: redriver on Feb 18, 2012 7:46 AM

Crystal Runtime 10.5 for Visual Studio 2008 - viewer/full version support

Hi - can reports developed in VS 2008 (CR basic 10.5) be run externally using a full or viewer version ? If so, is there a restriction on which versions can be used for this (2008 / 11 / 13 etc) and whether the version must be full vs viewer ?
The background is that we have an old asp.net 3.5 system that is being migrated from Windows 2008 / IIS 7 to Windows 2012 / IIS 8 - the app runs fine but it seems the 10.5 runtime is no longer supported. Recompilation using VS 2010 isn't an option so I was looking at client-side solutions if possible to run the reports outside of the .net app - preferably using a free viewer as the reports will not be re-designed.
I'm hoping this is a straightforward question but I've checked a few sites/forums and this isn't very clear. Grateful if someone can advise or point me to a site which clearly covers this.
Thanks.
tmdev

I don't know if you are looking for a web or win viewer, but as you are mentioning servers, I assume you are looking for some sort of a web viewer(?). And there is no such thing. There is a Windows viewer:
http://scn.sap.com/docs/DOC-29774.
CR 10.5 is supported - will be until Dec. 31, 2018: SAP Crystal Products - End of Mainstream Maintenance Dates: Current Products
However there are no fixes planned. Additionally CR 10.5 does not support WIN 2012. CR 2008 (v. 12.x) is supported in VS 2008 and when updated to Service Pack 7, you will get support for WIN 2012. See SAP Crystal Reports 2008 SP7 for Windows - Supported Platforms.
So, in a nutshell; upgrade the app to CR 2008, SP 7 and all should be fine.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Downgrading firmware on WRT54G/access restrictions

I had a WRT54G. Access restrictions worked. I upgraded the firmware and the access restrictions no longer worked.
So after researching, it appears the firmware I upgraded to was buggy and the access restrictions didn't work with the new firmware. I couldn't figure out how to downgrade back to what I had.
Called Linksys and ultimately they said they would send a new router. I asked if it would have the old firmware that my router had previously, where the access restrictions worked. Yes, they said.
New router arrives today. Firmware is v1.02.2, June 7, 2007. NOT the prior firmware. Sure enough, the access restrictions still do not work on this router either. I don't want to spend yet another two weeks trying to resolve this with Linksys.
Question: Is there a way to downgrade to firmware where the access restrictions actually work for WRT54G? If so,
what version should I downgrade to?
where do I obtain it? and
can I download the firmware and then install it using the administration/upgrade firmware tab on the router (even though it is a downgrade)?
Thanks very much for any thoughts.

Thanks for the suggestion, Badboy. Unfortunately, although I could download the firmware and successfully load it onto the router, the access restrictions in that version do not work either.
It doesn't seem as though all prior versions of firmware are on the ftp site, ftp.linksys.com. For example, I also have a wrt54gs v. 4 (speedbooster) with the same access restriction problem. It currently has a firmware version loaded that doesn't appear to be listed on that website. (I couldn't download prior firmware for that version that worked.) So, perhaps prior firmware exists for the wrt54g v. 6 that is not listed on that site also.
Does anyone know if there is another site that has a more extensive collection of prior linksys firmware?
If not, I suppose I can call linksys again, but even if they send yet another router promising the old firmware on it, I suspect the message is just going to get lost between the promise made on the phone and the guy in the warehouse filling the RMA order.

How to install older versions of Flash Player(ActiveX) in Win 8?

Hello all,
How to install older version of Flash Player in Windows 8? and how to uninstall default Flash Player that come from IE10 in Windows 8?
Actually I want to install Adobe_Flash_Player_(IE)_v11.7.700.224.exe in Windows 8.
Is it possible to overcome this issue? If it is not, could you share me your information on this issue?
Thanks in advance.
RK.

Thank you for reply..
Actually i uninstalled the existing version of Flash Player from my Windows 8 PC, but when i tried to install the older version, it was not allowing me to install and was showing that my browser is included with latest version.
Even i followed the below given websites, it didn't given any remedy for it.
http://flash-focus.blogspot.in/2007/03/installing-previous-versions-of-flash.html
http://www.itsecdb.com/oval/objectdetails/oval/org.mitre.oval/obj/7075/windows-registry_ob ject-Registry-that-holds-the-version-of-the-Adobe-Flash-Player-in/
So that my PC is restricting the older version installation from somewhere which holds the version information and that user cannot modify/delete that information. If i know that mystery i can install any version of Flash Player in my Windows 8.
I hope i will find this.
Thanks for your support.

JDeveloper crashes with triggers

Hi,
I still have a problem while trying to edit a trigger body from inside JDeveloper. In Connections-Navigator I can choose a trigger, but if I want to edit it, the IDE crashes without any warning. I even tried to create a new trigger, but the effect is the same. I have to mention that I'm using a Oracle 8i database. Of course I can use SQL*Plus for editing, but is this a bug? Thanks for your answers.

Hi Shay,
unfortunately I've got no message. The IDE is completely blocked out. I'm running it on a Windows XP Prof machine, so I have to kill the process (task manager), in order to get it running again. I think the problem might be the DBMS version (8i), because I tried it also connecting to a 10g and it works fine. Are there any restrictions regarding the version of the DBMS while trying to edit a trigger? By the way, right clicking on an existing trigger blocks the IDE too.
Wait, I've let it run and now I've got the trigger in the editor, but after about 15 min. Now it's blocked again (CPU activity:0; memory usage: 73012 KB). Now special scanning activity from the antivirus program.

PO Restriction if no version triggered

Similar Messages

Maybe you are looking for