PO status "Error in Transfer" but PO mail triggred to vendor
Hi,
We are using SRM 4.0 extended classic scenario (SP07).
Apparently PO goes in "Error in transfer" status & it is not replicated into R/3 however in the mean time PO mail gets triggered to vendor & Vendor receives a PO copy mail in his inbox.
According to me it's very strange behavior.
Has anybody come across any such behavior before?
Any help is appreciated & awarded with full points.
BR
Bharat M
Okay..according to you this is a standard behavior of a SRM system. Once PO is created & ordered on SRM , it will always triggered to Vendor. It has nothing to do with whether PO reached to R/3 or not.
I checked the log in Application monitoring & also on RZ20. It says that "No account assignment exists for service line 0000 000001" however Line item 1 is actually deleted in the PO.
We have many such cases of PO's where PO status is "Error in transfer" & application monitoring gives a error log about item which are actually deleted from the PO.
What could be the problem?
BR
Bharat M
Similar Messages
-
I got this problem when I tried to configure out-going email and add an account to farm administrator group.
I configure out-going email according to this website http://technet.microsoft.com/en-us/library/cc288949.aspx
Here are the screen shots.
The SMTP server and email accounts work out OK when I use Outlook 2010 to test.
Anyone can help me about it? Thanks.
Here is the log.
09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)
0x1138
SharePoint Foundation E-Mail
8gsf
High
#160008: The e-mail address 'admin3.sharepoint@domain' contains illegal
characters. df98555c-612f-4a58-9443-ab6e9a4fcc53
09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)
0x1138
SharePoint Foundation General
8kh7 High
Cannot complete this action. Please try again.
df98555c-612f-4a58-9443-ab6e9a4fcc53
09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)
0x1138
SharePoint Foundation E-Mail
7946 Critical
Cannot complete this action. Please try again.
df98555c-612f-4a58-9443-ab6e9a4fcc53
09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)
0x1138
SharePoint Foundation Runtime
tkau Unexpected
Microsoft.SharePoint.SPException: The user or users have been added successfully, but there was an error in sending the e-mail message. The server may not be set up correctly to send e-mail. To verify that e-mail is configured correctly, contact your
server administrator. at Microsoft.SharePoint.ApplicationPages.AclInv.SendEmailInvitation(EntityEditor picker, String subject, String message) at Microsoft.SharePoint.ApplicationPages.AclInv.BtnOK_Click(Object sender, EventArgs e)
at System.Web.UI.WebControls.Button.OnClick(EventArgs e) at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String
eventArgument) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStage...
df98555c-612f-4a58-9443-ab6e9a4fcc53
The e-mail address I have tested it for several times and there is no problem.
Anyone has any clue about this error?Hi.
This I have seen before...
It can be that the SMTP relay server is configured to only allow certain IP ranges or addresses.
It can be that the firewall on the SP server does not allow for SMTP traffic (normally 25, for example for Exchange).
It can be that there is an Antivirus on the SP server(Client AV) that prohobits the Timer service to send email from this server. I have seen MacAfee do this. Needed an policy change.
If, its the builtin SMTP service you are using, check this link:
http://blog.sharepointrx.com/2010/11/18/setting-up-the-iis-smtp-server-for-sending-email-from-sharepoint-2010-on-server-2008-r2/
Check that and try again.
Regards
Thomas Balkeståhl - Technical Specialist - SharePoint -
http://blog.blksthl.com
Download the SharePoint Branding Project here
Download the SharePoint 2010 Site Settings Explained here -
Hey peeps,
Im trying to publish a web gallery to be hosted on BC. Despite having what seem the correct settings im getting an error: FTP transfer failed ' unknown message'. Have checked with techs on BC. They say FTP working fine that end.
Any suggestions?Have you tried connecting to another FTP server in Lightroom?
For example, if you get a free Flickr account, can you login to it and upload a file to it?
If you can't upload to any server, then you have a general FTP-in-Lr problem, but if problem is only with BC then, well, it's time to start scrutinizing the BC settings..
PS - All my FTP'ing plugins have an enhanced FTP settings test feature designed to help you debug FTP settings, so another option is to download one of them, for example:
robcole.com - FTPAggregator
and experiment with settings tester:
To get here, you have to click 'View / Edit Additional Settings' (in plugin manager), then choose 'New' or 'Edit' from 'Sync Pairs' drop-down menu.
If test is unsuccessful, enable verbose logging (top section of plugin manager), and review the log file after test, or send to me.
If you have a problem running plugin, please contact me directly:
robcole.com - Contact Me
Rob -
HTTP Status Code 200 Received But Error During Response Parsing
Hi Experts,
We are testing a simple Proxy(ECC) to File scenario in QA. This interface was working fine in Dev but we are getting the following error here in QA:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
<!-- Call Adapter -->
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">OK_BUT_NO_XI_MESSAGE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>HTTP Status Code 200 Received But Error During Response Parsing: No XI Response Received XML element Envelope missing in SOAP message header (SAP XI Extension)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
We searched other threads but could not get any solution. Please provide suggestions.
Thank You.
Regards,
Anandanthe problem was due to high volume message (247 MB ) ...Java stack was not able to process this huge message ,that is the reason ,it started automatically and as a result , "HTTP Status Code 200 Received But Error During Response Parsing" due to unavailability of AFW during Call adapter step in the pipeline processing...
We have done the following activities in order to solve this problem....
increase the value of icm/HTTP/max_request_size_KB to 512MB
icm/wp_roll_timeout to maximum
HTTP TIMEOUT to 1800 sec
icm/wp_roll_timeout to maximum
mpi/total_size_MB to maximum
mpi/buffer_size to maximum
and then increased the maxthreadcount ,maxcontentlength using config tool...
and also increased the java heap size to maximum....
After doing everything ,the file has been successfully processed....
the problem has been resolved... -
Redwood CPS job goes to status ERROR but job works completes ok in SAP
Hi
When I schedule a particular ABAP job to run in SAP from Redwood CPS it always completes with the Error status in CPS, but the job runs okay and ends in the Finished status in SAP.
I tried a different ABAP job and this ran okay, with the CPS status going to Completed.
I had a look at the CPS log files for the Erroring job and there were no errors in the 'log' file but in the 'step1/spool1' file there is the line 'Processing completed with errors'. Is CPS doing a little more than SAP as regards checking job statuses and looking in the spool file for errors?
Checked the operator messages and all it says is:
Job 1501323 (submitted from ZGB_FI_KO8G_SETTLEMENT copy from 2009/08/24 15:34:54,250 Europe/London)) has aborted due to at least one error while running the jobs in step: Job 1501324 (submitted from ZGB_FI_KO8G_SETTLEMENT copy from 2009/08/24 15:34:54,250 Europe/London))
- doesn't elaborate why the job has status Error.
Is this saying the CPS part had an error or the ABAP part??
RossHi Anton
I checked the Return Code Mapping for this system and it is empty. No post running action or a trigger has been configured.
The first time I was having the error was after setting up a 2 step job chain. When I got the error (and the second step didn't run) I then submitted this first simple step from the job definition SAP_AbapRun in case there was an issue with the way I'd configured the chain; it still errorred though. All I am specifying is the ABAP program name, SAP job name, variant and queue to run on, and it does run okay in SAP.
When you say "The actual error should be available in the logfile of the SAP job itself" do you mean the joblog as viewing in SM37? There are no errors in there.
I'll have a play with the Return Code Mapping part as if CPS does search the spool for errors (perhaps by default?) and sets the status to error in CPS, I don't want it to stop the chain - although I guess I can always set the post action of step 1 to 'on error' 'continue'...
Cheers
Ross -
SC approved, but doesn't create followon doc and NO error in transfer
Hi,
I am getting this strange issue. My cart is approved and i am expecting follow on PO doc to be created.
However no PO is created and strangely when i checked there is no error related to Error in Transfer too.
checked monitors and no info there on this sc.
How come SC is not even resulted in error in transmission?
Appreciate your inputs/clues.
Thanks
KrishEveryone,
Thanks for your replies.
There is no issue logged in ST22 and also no alerts found in ST22. Checked BBP_PD too. It shows as approved. thats it.
Dinesh,
All my settings are working fine. The issue is i am having this problem only with very few shopping carts. Rest of them working fine and createing followon documents. If not, they are showing up as error in transfer and can see the log in RZ20.
But with this cart, i don't see any alert in RZ20. There is no entry found in BBP_Document_tab also.
I tried to run Get_Status program and it this SC is showing as not transferred and then i tried to run REQREQ also..but its not working.
So i am wondering what could be the reason for not being transferred to backend.
Appreciate any inputs/clues.
Thanks
Krish -
I keep on getting this error message on my Yahoo mail all of a sudden;
You're almost there, but your web browser doesn’t support the newest version of Yahoo! Mail
The links it gives to upgrade are blocked
I have latest version of FireFox 19 and Snow Leopard. I get the same error message on Safari and Google Crome aI even downloaded another Browser for Mac still got he same error message ! I have used the Disk Utility to repair files and rest Safari. I have deleted Firefox then downloaded a fresh version, still the same error messages ! Please help it's driving me nuts.You can check for problems caused by a possibly corrupted user agent.
See:
*https://support.mozilla.org/kb/Finding+your+Firefox+version
*https://support.mozilla.org/kb/websites-say-firefox-outdated-or-incompatible
*http://kb.mozillazine.org/Resetting_your_useragent_string_to_its_compiled-in_default -
I can't send an e-mail. My status has mail boxes online, but but the mail preferences changes the outgoing servers to (offline). What do I do?
Please describe in detail what happened when you took all the applicable steps in the support article that led you here. That's the starting point for any further efforts to solve the problem.
-
Now have iCloud mail. But the 'Sent' folder messages (only) did not transfer from MobileMe Mail.
Your first theory may be correct.
If you haven't already, change your password on your .mac account. That will stop any further action by the other fellow. Even if you can't tease out the detail of what happened exactly, you can at least fix the problem with the password change.
Also if you left on good terms, contact the new owner of the workMac and ask if s/he used your .mac account. -
I have created a slideshow (with music) in iPhoto, and each time that I try to export the slideshow, iPhoto stops the process and gives me the error message "OS Status Error -9459". What does this mean?
Go into the System/Energy Saver preference pane and turn OFF all options. Also turn off the screensaver. Then try again.
OT -
STPPOD Idoc creation status : Error in ALE Service
Experts,
I am trying to send GR from MM to SUS in MM-SUS Classic Scenario on ECC 6.0 Server. I have also configured Goods REceipt Notifications Functionality to sending GR from MM to SUS.
When i am trying to send GR Idoc is generated (STDPOD) but i am getting the Error whose status - 29 in WE02 t-code :
Status Message for Selected IDoc
Status Text: IDoc: 0000000000211243 Status: Error in ALE service
T100 Text: Entry in outbound table not found
While i have properly configured Partner Profile for Message Type STPPOD :
Partner Role Basic Type Receiver Port Application Output Mode
LS DELVRY03 A000000018 (XI port) GRN Transfer Idoc Immediately
When i try WE19 t-code for this idoc, i found the error "Port '' does not exist in the table of port descriptions"
while i have already defined port (A000000018)in WE21 t-code and this port also working fine for other messages.
Please suggest.
Thanks.
Regards,
Pawan KeshwaniNikhil,
Issue is resolved it was the wiered error. As i removed LS from the field Partner Role in STPPOD message at partner profile(WE20) for SUS Client in ECC. Now the message STPPOD outbound message working fine.
Thanks.
Regards,
Pawan Keshwani -
PO Output is possible for SRM PO's in status Error in Process
Hello All ,
We have a requirement, where system should not process the PO output when the PO is in u201Cerror in transfer status u201C .
While creating the PO -> If the SRM PO is in Error in Process status, output will be processed and its sent to vendor also.
Since Error in Process status in business point of view consider as error free PO but fails to transfer the PO to back-end due to some technical or customization.
While changing the PO -> if the SRM PO is in Error in Process, We can stop the process the output with the help of OSS Note 1324180 which has been already implemented.
Can anybody tell me how can we achieve this . Any pointers. We have also tried with condition based output workflow start conditions also .but it couldnu2019t work .
Thank you
BharathiDear Expert,
Please check in RZ20 what specific error is being shown and accordingly either error message can be changed to warning message or customization should be done so as to replicate the PO into backend.
Thanks and Regards,
Sathya Kumar. -
Error during transfer of tax Condition JIN1
Dear All,
As I create a Sales Order with ref. to Quotation,I get a message in the status Bar mentioned in the Subject line.
Condition type JIN1 is not maintained in the Sales Document Pricing Procedure but mentioned in the Tax procedure.
Detailed Error Description:-
Error during transfer of tax condition JIN1
Message no. VH807
Diagnosis
A condition type is found in the tax determination procedure, which is not available in the current document pricing procedure.
If I see the JIN1 condition Type detail in the sales order,there is an added option in Control data :- X (Inactive via formulae of incorrect).
Kindly suggest.
Best Regards,
AnkurCheck in your pricing procedure, whether you have maintained this condition type. Next check in FTXP whether you have maintained the required percentage against this condition type
Incidentally, if you are in ECC6, condition type for CST is JIN7 and not JIN1 in which case, check in V/07 and select MWST
thanks
G. Lakshmipathi -
SC item still in status "Item in Transfer Process"
Hello,
We have some SC that are still in status "Item in Transfer Process". THey have no error but we don't get the R/3 document. In our case we must get Purchase Requisition but we have nothing. We can"t transfer manually the SC in the monitor because the button is disable for those SC. Can someone help us?
Thanks.Hi
Which SRM and R/3 versions are you using ?
<b>Please have a look at the following OSS notes, which might help.</b>
<u>550071 FAQ: EBP - Shopping Cart
757625 Incorrect Status I1112->analysis report
990767 Service: Name of requester not in back-end purchase order
988490 Name of requester not in back-end purchase order
755769 Status I1113, no item or header relations->analysis report
958395 Termination during transfer from template
890481 Cleaner job: Do not delete processed entries
772778 Creation of local PO from external requirement: => Alert
140846 BBP: No purchase order generated although data complete
751022 Monitor Shopping Cart: Item deletion causes termination
573493 ECS: Error for SC item without plants
815721 Multiple transfers of shopping carts
781260 Incorrect purchasing group for catalog item
774596 Deleting shopping cart item: Items are transferred
610601 Shopping cart monitor: Check status after transfer
765432 Shopping cart: Old PO / template with hierarchy
753787 Monitor shopping cart: Shopping cart with deleted items
729967 Shoppng cart:Status I1111,no follow-on docs->analysis report
670346 Favorites from catalog: Price 0 during transfer
623415 Shopping cart monitor: Icon / status for the shopping cart
566546 No local procurement process with activated ECS
504831 Shopping cart: search help goods recipient from note 448598
609610 Deleting incorrect shopping cart items in monitor and status
534653 Shopping cart monitor: Display of deleted items
486452 Unloading point in shopping cart
580548 Shopping cart: BBP_DOC_CHANGE_BADI - account assignment data
507278 Incorrect storage location in the shopping cart
540635 SC: no BE doc., no message if error in recipient data
522620 Shopping cart monitor: Customer enhancement / BADI
519519 Shopping cart monitor: Deleting shopping cart/icon inactive
513030 Description disappears after calling the input help
499013 RZ20: No re-submit or deletion of items
493478 Transfer the item from the catalog without account assignmnt
432434 'Item in the transfer process' for reservations</u>
Regards
- Atul -
JTA Transaction :status should be active, but it is STATUS_COMMITTED = 3
Hi,
I have query how to have the JTA transaction in SEI(Service endpoint interface) generated by WSDL.
I have a MDMListener (using MDM API) which looks for a recordchange in MDM repository which needs to be send to PI7.1 via soap request.
1) I had imported the WSDL from ESR(PI) and generated outside-in proxy.
2) Created ejb3.0 stateless session bean using NWDS
3) Created web service client application by generating the WSDL again (by Generate client)
4)Added a method callPI()with Service and i set the context with endpointaddress property as the soap location of the sender agreement configured in PI7.1.
The damean thread listener(EventDispatcher) looks for MDM record change and it calls the method callPI() from ejbsession bean by lookup to transfer the record to PI7.1 system via webservices(web method). I hit the below error.
Exception com.sap.engine.services.ts.exceptions.BaseIllegalStateException: Status of ( SAP J2EE Engine JTA Transaction : 06223ffffffa20048fffffffe ) should be active, but it is STATUS_COMMITTED = 3.
at com.sap.engine.services.ts.jta.impl.TransactionImpl.registerSynchronizationWithoutStatusChecks(TransactionImpl.java:672)
at com.sap.engine.services.ts.jta.impl.TransactionImpl.registerSynchronization(TransactionImpl.java:641)
at com.sap.engine.services.ts.transaction.TxLevelSynchronizations.addSynchronization(TxLevelSynchronizations.java:118)
at com.sap.engine.services.ts.transaction.TxManagerImpl.registerSynchronization(TxManagerImpl.java:829)
at com.sap.transaction.TxManager.registerSynchronization(TxManager.java:303)
at com.sap.engine.messaging.runtime.j2ee.sapengine.SAPTransactionManager.registerSynchronization(SAPTransactionManager.java:126)
at com.sap.engine.messaging.impl.util.tx.TxController.<init>(TxController.java:83)
//Method in the ejb stateless session bean
@WebServiceRef (name="DistributeMasterDataService") DistributeMasterDataService service;
@RelMessagingNW05DTOperation(enableWSRM=true)
public void callPi(DistributeMasterDataRequestType req) {
port.distributeMasterDataOutA(req);// the distributeMasterDataOutA is the method available in SEI..Here is the issue on JTA
For the first time the message(req object)transmits to the PI successfully,but for the second call i hit this JTA Transaction :status should be active, but it is STATUS_COMMITTED = 3.
I tried chanding the transactionmanagement from container to bean.
@TransactionManagement(value=TransactionManagementType.BEAN)
@TransactionAttribute(value=TransactionAttributeType.REQUIRES_NEW)
I wanted to know how can i have the JTA transaction status in SEI(service enpoint interface)java method distributeMasterDataOutA.Since it is an interface i dont know what annotation can be used.
If its possible i can try this UserTransaction,
http://help.sap.com/saphelp_nw04/helpdata/de/f6/7a8df922db4ab79342b46c48dac7d0/content.htm
ut.begin() & ut.commit(),so that everytime this method is called it will treat as a new transaction..
Let me know if you need more details??,Any idea provided would be great.
Thanks
Sabarinathan
Edited by: Sabarinathan Selvaraj on May 7, 2009 12:31 PM
Edited by: Sabarinathan Selvaraj on May 7, 2009 12:32 PMHi,
May be i have not mention the issue clearly.Let me know mention the issue with details.
I have a MDMListener (using MDMPI) which looks for a recordchange in MDM repository which needs to be send to PI7.1 via soap request.
1) I had imported the WSDL from ESR(PI) and generated outside-in proxy.
2) Created ejb3.0 stateless session bean using NWDS
3) Created web service client application by generating the WSDL again (by Generate client)
4)Added a method callPI()with Service and i set the context with endpointaddress property as the soap location of the sender agreement configured in PI7.1.
@WebServiceRef (name="DistributeMasterDataService") DistributeMasterDataService service;
@RelMessagingNW05DTOperation(enableWSRM=true)
public void callPi(DistributeMasterDataRequestType req) {
port.distributeMasterDataOutA(req);// the distributeMasterDataOutA is a method available in SEI
For the first time the message(req object)transmits to the PI successfully,but for the second call i hit this JTA Transaction :status should be active, but it is STATUS_COMMITTED = 3.
I tried chanding the transactionmanagement from container to bean.
@TransactionManagement(value=TransactionManagementType.BEAN)
@TransactionAttribute(value=TransactionAttributeType.REQUIRES_NEW)
I wanted to know how can i have the JTA transaction status in SEI(service enpoint interface)java method distributeMasterDataOutA.Since it is an interface i dont know what annotation can be used.
If its possible i can try this UserTransaction, ut.begin() & ut.commit(),so that everytime this method is called it will treat as a new transaction..
Let me know if you need more details??,Any idea provided would be great.
Thanks
Sabarinathan
Maybe you are looking for
-
Returning array of values from a PL/SQL stored procedure
I try to run the following example, always happen errors: Run-time error'91' Object variable or With block variable not set.(in line: Set myRS.Source = myCmd1 and Set myRS.Source = myCmd2) Who can tell me where is wrong? I check variable, all set. Op
-
Generating Header and trailer sections in reports..
Hi all. I want to generate reports, that has both a header- and a trailer section page. Usually this was part of the template report, but in Designer 9, the generator first converts the template report (.rdf) to a template report (.tdf), and is then
-
Help Please - Pdf shows/ reads some white pages when opened by some people
I have made a pdf book of my artworks ( on a mac) and have a major problem. When I send it out, some people are able to read everything but others get a couple of white blank pages when they view the pdf online or download it or sometimes only either
-
Script to assign licenses to bulk AD synced user's office 365
i have dirsync so all my local ad users are synced with office 365 tenant Now I am migrating mailboxes and I need to assign licenses to a bulk migrated users using csv This process requires 2 steps 'cmdlts' $usagelocation = "SA" Set-MsolUser –UserPri
-
I m new to sap can anyone help me???
hi...my company is under the process of implementing SAP though being in I?T department i m totally unaware about its working and implementation processes can anyone please guide me