PO status if you change the release strategy procedure

What will happen to the half released PO/PRS if we change the release strategy?

Hi,
It won't Happen for Half release PO Document. The rerelase will get affect once the final release done or No release initiated to the document.
SAM

Similar Messages

  • How do you change the status of a survey in CRM_SURVEY_SUITE?

    Hi,
    How do you change the status of a survey in CRM_SURVEY_SUITE, e.g. from Activated to not?
    Thanks!

    Hello Anne,
    I would like to suggest you that once you have created any survey and activated it there is no such option to deactivate it.
    The only option is that if you go and edit the survey then it deactivate the survey and creates a new version of the same.
    thanks
    Willie

  • How to set the Release Strategy without classification for PR

    Hi,
    I am able to set Release Strategy for PO with classification, however, now I want to set the Release Strategy for PR with classification. Can someone tell how to proceed to set the Release Strategy to PR with Account Assignment.
    I crated the Release Codes, however not able to find what options to choose in the following steps :-
    Release indicator
    Assign Release Indicators
    Release Points: Prerequisites
    Determination of Release Strategy
    Regards,
    Yogesh

    1. Release codes                                                            
       Create the release codes.     For  Purch. Officer, Manager and Sr. Manager                                                                               
    Like PO, MG, SM                                      
    2. Release indicators                                                       
       Define release indicators and branch to the detail screen. Here you      
       define whether fixed purchase requisitions may be changed by Materials   
       Planning, for example, and whether an RFQ or a purchase order may be     
       created from the requisition.                                            
       You can also determine the field selection here.                                                                               
    In the area "Changes after the start of the release procedure", you      
       specify whether a requisition may be changed after the release           
       procedure has begun. You specify whether the strategy has to be          
       redetermined after changes, or whether the release procedure has to      
       start all over again from the beginning.                                                                               
    This parameter bears a relation to the parameter "Value change". For     
       example, previous releases are not cancelled if the value of the         
       requisition item after the change does not exceed plus 10% of its        
       original value.                                                                               
    Attention:                                                               
       Be sure to create a release indicator (e.g. B for "blocked") that        
       serves as the starting point for subsequent indicators. Do not set the   
       indicators for release for the issue of RFQs and PO on the detail        
       screen for this indicator.                                               
       Also create a release indicator characterizing the released status.      
       Set the indicators for release for the issue of RFQs and PO on the       
       detail screen.                                                           
    You can use sytem defined indicator in this case you don’t have to do anything                                                                               
    3. Assignment of release indicators                                         
       Assign a release indicator in dependence on the status of the release.                                                                               
    Example:                                                                 
       You create a release strategy S1 consisting of two release codes 01      
       and 02. Release with 01 is a prerequisite for release with 02. If        
       release has been effected with 01, the requisition has been given the    
       "all clear" for the issue of RFQs.                                       
       You have created the release indicators B (blocked), 1 (cleared for      
       issue of RFQs) and 2 (cleared for RFQs and PO).                          
       Now enter the following as assignment:                                                                               
    Strategy   C1  C2  C3 ...                                                
       S1                          B (blocked)                                  
       S1         X                1 (RFQ)                                      
       S1         X   X            2 (RFQ/PO)                                                                               
    4. Release prerequisites                                                    
       Define which release codes are involved in a release strategy. Specify   
       whether a code is set for a release status following release, and        
       whether one release status is a prerequisite for another (+).            
       Example:                                                                 
      Strategy   Code  C1  C2  C3 ...                                  
    S1         01    X                                               
    S1         02    +   X                                                                               
    5. Determination of the release strategy                            
    Determine the conditions under which each release strategy is    
    assigned. The criteria are account assignment category, material 
    group, plant, and value of the requisition item.                                                                               
    Here you can define the you criteria but one thing you keep in mind that you hae to define all criteria.
    E.G if you will not define the Material group here but it will default in req in that case this will not work that’s the reason you have to work with Classification.               
    <b>In the classification whatever criteria you need that only you have to include like in your case you care about A/C category and value only.     </b>

  • Item category control the release strategy?

    Hi,
    Currently the purchase of a material needs to be released.
    My issue is that as soon as I change the item category in the sales order,
    the material does not need to be released.
    How does item category control the release strategy?
    Sincerely,
    Ketan

    Hi Ketan,
    You can set item category in the characteristic of a release strategy.
    In your case, I guess the item category characteristic is already created. So you can just add the desire value into the characteristic.
    Go to SPRO > IMG > Material Management > Purchasing > Purchase Requisition > Release Procedure > Procedure With Classification > Set Up Procedure With Classification > Release Strategies
    Select the related release strategy, double click to view the detail. You will see there are 4 buttons in the bottom of the screen. Choose 'Classification' and enter you value of item category.
    Thanks & regards,
    JT

  • Reset the Release Strategy of PO when Terms of Payment key is modified

    Hi All,
    Please let me know how to reset the Release Strategy of PO, whenever the Terms of Payment Key value id modified.
    Thanks in advance.
    Regards
    Naveen

    Hi,
    This is not possible in SAP standard.
    You have to use User Exit;
    M06E0004 - Changes to communication structure for release purch. doc.
    And Function Module;
    EXIT_SAPLEBND_002 - Changes to Communication Structure for Release of Purchasing

  • Restrict to change the released document

    hii all,
          i am seeking for a suggestion whether its avalable in standard  sap or not.
    i want to restrict to change the released document. once,document has released, then chage shud not affect.
    thanks.

    Hi,
    For this you only need to set the changeablity from the release indicator to "1".
    Best Regards,
    Arminda Jack

  • Source Determination resets the release strategy of the PR

    Hi
    I am trying to automate the Purchasing Cyle by running ME57 as a batch job along with ME59n for stock items on contract, however when I create the PR and approve it, when ME57 picks this approved PR it assigns the source automatically but removes the approval! I am having the ABAP consultants debug this, however is there something elementary that I have left out?
    Regards
    Thasmei Reddy

    Check if u have release strategy based on vendor - FLIEF. This could be a reason. When u change the vendor or assign a vendor, the release strategy is getting reset .

  • Can you change the year of all songs in an album without changing the year of the album?

    Hi everyone,
    I was wondering if it is possible to change the year of all the songs within an album while keeping the year of the album. This is particularly relevant in 'Compliation' or 'Best of' albums, where all the years the songs were produced is different o the year the album was produced.
    Foe example, The Beatles' best of album '1' was created in 2000, but all of the songs were from 1963-70. In iTunes, the album is listed as being released in the year 2000, which is correct, but all of the songs are listed as being released in 2000, too, which is incorrect. However, when I change all of the individual songs to their correct year in which they were created, the year of the album also changes to that of the first song on that album. In short, either the album year is correct but all the song years are incorrect OR the album year is wrong but all the song years are right.
    Does anyone kinow if there is anyway to change this or get around this?
    Many thanks!

    Hendylele wrote:
    Do you have any idea whether or not Apple are seeking to do anything about it in any upcoming updates?
    None at all. If you'd like them to consider it you'll need to use the feedback link I gave above.
    A long standing bug bear for some is not being able to correctly sort two albums released in the same year by the same band. Having both copyright date and release date would (if implemented properly) give the option to sort, or filter tracks on either date as required.
    iTunes is a database of tracks. Albums don't really exist separately. There are a few collective properties. Year can have a separate value in each track but obviously only one value can (or at least should) be used when sorting as Album by Artist/Year. If you change the album rating of a single track in iTunes (which can be done with a script) iTunes automatically updates all the others to match.
    tt2

  • How to change the release of the sesment?

    Hi gurus:
        I have created a custom segment type Z automatically when i release the segment the system set the release of my segment at 700 (the release of my SAP), but i have to set the release at 640. How can i do?
    alex zhang

    Hi
    When your system release at 700 , how can you set the release status of your segment for 640, I think its not possible.
    in WE31 when we create the Segments and release them( from menu EDIT-> set release/Cancel release), By defualt it will get released as per your system version.
    <b>Reward points for useful Answers</b>
    Regards
    Anji

  • How can I customize my status bar to change the color?

    Hello:
    How can I customize my status bar to change the color?
    Thanks

    On which phone model? Either way, modifying the notification bar text color usually isn't something you can do with a standard stock phone.

  • How do you change the default font in Illustrator CS5?

    I have upgraded my Illustrator to CS5 and my default font has changed to a strange font. In Photoshop and InDesign, I was told that all you have to do is change the font in the Character menu to the font that you wish to be set as "default" and it will be the font that you always start with.
    NOTE: Does this mean that if I use a different font in a different document, the font will stay that font unless I change it back? Isn't there a way to make a particular font the font that I would always what I start with? All this setup means, is that the "default font" will always be whatever the last font that  was being used was. There has to be a way to make a default font that I will always start with no matter what the last font that was being used was.
    Illustrator gives you no option on font type, unless a file is open. Then, if you change the font and close the file, next time you start a file, it will go back to what is was to begin with. There has to be a way to change the default font for all of these programs to where the font always stays the same unless you change it. Mine is just set to use a weird font that I would probably never use.
    I just never thought it would be that big of a deal to change default settings for the font.

    Okay, I basically made three different documents and I made sure that I had everything chosen in each. I then saved the three to that file and they now appear in the list:
    Settings for all 3:
    72psi, 150psi and 300psi
    Rulers Visable
    Times New Roman
    12pt
    14.4pt
    I then went in and started three new documents. I used the three different New Document Profile's that I made and they all had Rulers, their sizes were correct, but the font stayed Myriad Pro. Did I miss anything? And, Yes, I did change the font and the setting before I saved them in the New Document Profile.
    One other thing, I did create a file in the folder, but it was spelled incorrectly. I then went into the folder, erased it and made a second. Then, I went to open it in IllustratorCS5 and it was still listed. I went to the file and it wasn't there anymore, but it was still listed in the New Document Profile. Is there a way to get it off of the list or is all I have to do is restart Illustrator?

  • You changed the order of the menu for "Open in a new window" or "Open in new Tab", How can I change it back? Or how can I omit any reference to tabs? I do not use them at all.

    You changed the order of the menu for "Open in a new window" or "Open in new Tab", How can I change it back? Or how can I omit any reference to tabs? I do not use them at all.

    You can use the Menu Editor add-on to rearrange or remove menu items - https://addons.mozilla.org/firefox/addon/menu-editor

  • Can you change the legth of time (or number of rings) it takes for on iphone 4 to time out making an outgonig call?

    Can you change the legth of time (or number of rings) it takes for on iphone 4 to time out making an outgonig call?
    Mostly it's to call in for radio contests. The Iphone is really good at making a quick call, but it seems to timeout after 15-20 rings. I realise this is a small thing, but free tickets is free tickets.
    Most commenst I see is abotu incoling calls, not outging.
    Thanks.

    No. You can't do this with any phone.

  • HT5312 How do you change the email address used to send security answers?

    How do you change the email used to send the security answers you have forgotten? I have changed the alternative email adress in Name, ID and Email Addresses but this does not change the email address in the Password and Security section.

    Jus what do you want to accomplish? The Apple ID email address is used for variosu thing onthe iPod like:
    - For purchasing media. Srrings.iTunes and App stores. Sing out and sign into anoterh account
    - Settings>iCLoudl for iCloud account
    - Settings>FaceRome for Apple ID and where You can Be Reached At email address
    - Settings>Messages for Send And Receive email address.
    - Maybe for Game Center

  • Same question for the "2 iPhones in one account".....How do I change the name.  My iPhone is showing my wife's iPhone name when I am syncing it.  Why is that?  I know about using one iTunes account....But how do you change the name w/o erasing your data?

    Hi....How do you change the name?  When I sync my iPhone, it shows my wife's name on it?

    Unfortunately it is not doing it....
    Let me give more details..We have 3 iPods and 2 iPhone4....I recently purchased the iPhone4 and when we connected it..It was already reading my wife's iPhone4..We went to the Apple Store at the Grove today and was told to de-authorize the system and connect my iPhone4 back and I should be able to change the name.
    Nothing happened..Right now, I clicked on RESTORE settings...and it is uploading a new iPhone update. 

Maybe you are looking for