PO still in Approval Status (Urgent)

Hi All,
I am working on extended classic scenrio.
I ordered a shopping cart which has the status approved and follow on document were created in this case it is a local PO(contract release order)
when I checked the local PO, I found that this PO is in approval state also a copy of this PO exist in the backend system.When I tried to change this PO I get the warning message that "Document is still being processed in the background,try again later".
I tried several times at regaular interval but again it gave the same warning message.
I also checked the two reports clean_reqreq_up and bbp_get_status_2 and I found that some of the entries are missing beacause I created this PO around 2pm and the entries were available in the two report from 10 pm.
I think something might have gone wrong there but I am not having a log of that.
I am on SRM version BBPCRM 4.0 SAPKU40007
R/3 version 4.6 C SAPKH46C47
Regards,
Raj

Hi Cristophe,
I checked the table BBP_WFLOCK and could not find any entry.
However in transactional RFC I could see an entry for this user XXXX and tried to delete this entry but I am not able to do so,below are the details observed in SM58
SWW_WI_EXECUTE_INTERNAL_RFC is the Function module.
WORKFLOW_LOCA is the target system.
Error in the module RSQL accessing the database is the status text.
Also I checked the FM BBP_PDH_WFL_CHECK_WF_BUSY but did not find any error.
One thing I would like to mention is that in BBP_PD the workflow status is completed for the PO but only in the web browser it is showing the status Awaiting Approval.
Again I tried to change the PO but again I received the same warning error "Document is still being processed in the background,try again later".
Regards,
Raj

Similar Messages

SC still in approval status after creating a SC

Hi guys,
we have implemented SRM 4.0 (SRM-Server 5.0) in ECS as a test-system. All Workflows did work until we installed SP 9 and 10. By installing these packages we had to delete some taks for workflows (activation of WS10000060). We reactivated the workflow but now if we create a SC the approval workflow is not started automatically. In this case no approval-Workflow (WS10000060) is not started. We checked all instructions of note 322526 but we didnt identify any error. If we create a event manually with transaction SWUE the workflow is started and the SC is approved. In transaction RZ20 we got the following error messages:
Folder SAP EBP Procurement Internal Monitors -> Internal Errors -> Approval: "Function module error BBP_PDH_WFL_START_NOW at position BBP_API_SIMULATED_WF_SCHEDULE start now. Sy-subrc:"
Folder SAP EnterpriseBuyer Monitors ->Approval -> Other Errors: "Object is not a procurement document"
Thank for your help in forward. We appreciate your help a lot.
BR,
Bernd

Thank you guys,
this note did solve my problem.
BR,
Bernd

SRM 5.0 Confirmation in Awaiting Approval Status

We have the confirmations in "Awaiting Approval" status.
I had checked the following steps but still the status remains as-is.
1. Transaction SWUD
2. Enter workflow WS10400010, press enter
3. Execute 'Test environment'
4. Check 'Including subworkflows'
5. Execute 'Consistency check for components'
There are no errors for BUS2203 (Confirmation business object).
I have cross checked the BUS2203 for WS10400010 Active Status is both T-Codes SWETYPV and SWE2.
We had a previous issue of BUS2203 with some errors and that went away after following steps in OSS Note and SDN comments. Note 962488 - "Workflow definition '&' not in version '&' (WD 401) and SDN.
WS10400010 is No Approval Workflow for confirmations that is active and classified as General Task.
Can you please advise on this status issue?

Please analyse the Workflow log from SWI2_FREQ. I think you can check this issue in SRM forum. I think this is discussed.
Thanks
Arghadip

After approv status inquiry, it should not allow to change anything .

Hi,
As per the client requirement, we have assigned the three level status profile to in inquiry process like Block status, Review and approve status.
Block status-It is initial status. After save the document it will be in block status
Review status u2013It is the 2nd status. After review of authorized person, it will be changed as review status.
Approve status- If everything is correct, then higher authority will give the approval for same and will change the status.
Here client requirement is after approval of same inquiry document, it should not allow to anybody to change anything (quantity, material, any addition) in same document with va02 Tcode. Need your support if anything possibility is there for same requirement.
Thanks
Utpal mishra
Sr.SD Consultant

Already another thread is still open. Please maintain one thread for better monitoring.
Thanks
Regards,
Reazuddin MD

Display PO Release group Approval Information-urgent

Hi All,
     In my report i have to display PO Release Date, PO Release group in various level,based on Approval From Release i have to display the PO Status(Released or not).In Our project we have 3 level of approval in PO Release group such as PO(Purchase officer),PM(purchase manager),GM(General Manager).So finally my output like this.....
Release Date ReleaseGroup Status
                      PO PM GM      Pending
So guide me where can i get the fields for
PO Release Date,
Release Group and their approval status,status of PO

Hi Cristophe,
I checked the table BBP_WFLOCK and could not find any entry.
However in transactional RFC I could see an entry for this user XXXX and tried to delete this entry but I am not able to do so,below are the details observed in SM58
SWW_WI_EXECUTE_INTERNAL_RFC is the Function module.
WORKFLOW_LOCA is the target system.
Error in the module RSQL accessing the database is the status text.
Also I checked the FM BBP_PDH_WFL_CHECK_WF_BUSY but did not find any error.
One thing I would like to mention is that in BBP_PD the workflow status is completed for the PO but only in the web browser it is showing the status Awaiting Approval.
Again I tried to change the PO but again I received the same warning error "Document is still being processed in the background,try again later".
Regards,
Raj

Confirmation ending in Awaiting for Approval Status

Hi Experts,
The Confirmation of Goods receipt was working fine till last month. Now For some PO's Confirmation is going to Awaiting for Approval status this is happening only for few PO's and for others PO's Confirmation is happening properly and the status is Posted in Backed.
I observed that Workitem ID is not created for those confirmation's which are in Awaiting for Approval Status.
Please help me resolve this issue.
Any valuable inputs are Appreciated.
Thanks and Regards,
Devananda A J

Hi,
First point if you make a GR confirmation means the PO change version will be generated and the PO workflow will restart for the PO change version.
Goto BBP_PD and enter PO number check the PO change version is closed or not. If it is not closed then PO change version workflow will be in Error. If it is in Error then GR confirmation workitem will not be genrated.
all these things will happen because of if you create a GR confirmation or any changes made to PO when the PO status is still in Transfer status.
regards,
Devi

Can you update Approval Status in Sales order using DI API using SDK

Hi experts,
Can we actually update the Approval Status(WddStatus) in Sales order From approved to pending using DI API.
Thanks,
John

Hi John,
When the sales order is originally created, and at that point pending approval, it is stored as a draft. Once approved, a sales order is created based on the draft.
In other words, the pending document and the approved document are two entirely separate objects in the database (they use different tables), and in the SDK.
That means that you can certainly realize your requirement, but you will have to look at it from another perspective. In quasi code:
Intercept the update event
Check if any changes were made that warrant another approval round
If so, duplicate the (adjusted) order, and submit the new order to trigger the new approval round.
Close or cancel the original order.
Admittedly this seems a bit silly, but unfortunately the approval process in B1 is still not perfect. As such I recommend that you (also) log on to the SAP Business One Idea Place, (it is free, like the SCN) and vote for any ideas that pertain to your requirement, and/or create an idea of your own.
Another approach all together could be to instruct users not to make changes to orders, and to use the stored procedure to prevent updates. And allowing users to only submit a new order altogether (they can use the duplicate functionality).
Regards,
Johan

SC with awaiting approval status and no work item for Approvers.

Hi Experts,
We are implementing Classic scenario with SRM7.0 and we are having Application controled Workflow.
We are fasing issue in workflow. On SC getting ordered the status is showing as awaiting approval and there is no work item found in BBP_PD.
When we approve this SC in SWO1 then there is no PO getting created.
If the SC value is less than spend limit we have enabled no Workflow and in that case the approval agent table is showing as System Approver and after SC getting ordered the SC is still with the status Awaiting approval.
Can any once have an idea how to go about with this issue.
Regards,
B.N.Karthikeyan

Hi,
Did you check the event linkage in SWE2? what do you see in SLG1? Did activate the task groups 40000003 and 40000007? also check in SM58 and SM21..
Saravanan

HR ECM EP4- Infotype 0759 approved status question

Hi HR Experts,
When the planning status of infotype 0759 change from submitted to approved? I have an org unit which is get approved but the infotype 0759 still has planning status submitted. The superior org unit still has open status.
Thanks,
Duy

Hi,
Adding on to Paulu2019s inputs, you must run report u201CDisplay Compensation Planning Progressu201D (RHECM_DISPLAY_PROGRESS). From SAP help:
Upon execution, this report evaluates the contents of the Process History table (T71ADM_PROCESS) for the selected organizational unit(s) during that compensation review, then displays the contents of that table in the report output.
Source: help.sap.com
Hope this helps.
Donnie

Folder Approval Status Pending

HI,
I am adding a custom site page using a module in Visual Studio project.
Below is my sample Module Scrip
<Module Name="SampleFolder" Path="SampleFolder" Url="$Resources:osrvcore,List_Pages_UrlName;/SampleFolder" >
<File Path="SamplePage1.aspx" Url="SamplePage1.aspx" IgnoreIfAlreadyExists="TRUE" ReplaceContent="TRUE" Type="GhostableInLibrary" Level="Published" >
<Property Name="Title" Value="Sample Page1" />
After deploying I am able to see a new folder SampleFolder in Pages library and able to see a file named SamplePage1 in that new folder.
The file Approval status is "Approved" but the Folder approval status is still "Pending".
Kindly help me with inputs on how can I make this Folder Approval status as "Approved".
Thanks,
kesari suresh

Hi kesari,
Glad to hear that you have sovled the issue, and thanks for your sharing!
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Eric Tao
TechNet Community Support

What's the WMI class name to get Client Approval status

What's the WMI class name to get Client Approval status.
Unfortunately the below example with class "SMS_R_System" does not have the approval status
Get-WmiObject -Namespace "root\sms\site_LAB" -Class SMS_R_System | fl *
I listed all the available classes and... yeah It's going to take along time to go though all the possibilities.
Note: I'm running this in powershell on the primary first
If anyone knows it... I'd appreciate your help

This is all still in the testing phase so I'm not sure this is the best solution... but here's my problem and idea to resolve it.
Currently in our environment OSD can only be run against unknown computers and approved clients.
I currently automatically approve all clients in a trusted domain. So all systems that succeed OSD and auto join the domain are approved and I can always run OSD against those machines in the future.
Problem is with the systems that fail OSD for any reason and therefore do not automatically join the domain. They end up getting a SCCM record by the name of "Unknown" and therefore cannot run OSD again until the "Unknown" record
is deleted. "Unknown" records happen too frequently to manually delete and I'm not too comfortable with just deleting ALL of them on a scheduled basis.
Additionally there are way too many OU's in my environment to automatically join our OSD'd systems to the domain. So I have a script that checks using a prestart command to see if the system is already in AD, and if so then OSD continues and simply
joins the machine to the domain in it's current OU. If not the tech is given a nasty error message telling them to add the computer object in AD in the proper OU first.
I intend to check , with a Prestart Command if the current system already has a record in SCCM and delete it if found AND is not approved yet. This should resolve the "There are no task sequences available" error I get with
systems that have an "Unknown" SCCM record.
In this way the system will be essentially approved if the system was already prestaged in AD manually by a technician and any "unknown" record for that system will simply be deleted at the point of OSD.
Note: Although I can easily use the new SCCM Powershell cmdlettts and get the "Approved" status, I need to do all of this in WinPE without the cmdletts. If this property is not available via WMI, then I'm guessing this will not work.

Standard Report, for checking the PR approval status by a certain User

Hello Experts,
                      Is there any standard report in the SAP where we can find out for the given managers, if level 1 approver is Mr. X, then which all has been approved by Mr. X and and pending with subsequent approvers?
Please help.
thanks and regards,
Yawar Khan

Hi,
Yes, standard report is available for PR approval status list using T-code ME5A - List Display of Purchase Requisitions and the following input data's are given .
Purchasing Group                  :    ___
Scope of List                         : ALV
Plant                                       : _____ (if required)
- Assigned Purchase Requisitions to be ticked.
- Released Requisition Only to be ticked.
- Requisition for overall Release to be ticked.
- Requisition for Item-wise Release to be ticked.
Now execute the report and then report top layout button click for 'Release indicator' option selected for released status confirmation purpose. If release indicator status is 'X' means PR released, otherwise PR is not released.
Hope, it is useful for you.
Regards,
K.Rajendran

Approval Status Report, SBO v2007, current data or cumulative?

I run the Approval Status Report while logged in as a superuser, selecting
Document Status: 'Pending',
no limits set in the To/From middle section,
all document types ticked,
and I get a list of document numbers.
I immediately re-run the Approval Status Report while logged in as a superuser, selecting
Document Status: 'Generated',
no limits set in the To/From middle section,
all document types ticked,
and I get a list of document numbers that includes some of the 'Pending' status ones from the first run.
How can the document be in both 'Pending' and 'Generated' status at the same time? Is this report supposed to show me the current status of documents, or all accumulated approval action taken on documents?

Hi Cindy,
Document number in approval is not unique. Same number may refer to more than one document. All draft documents will only be assigned a unique marketing document number until approved and created.
That is probably you can see the same number in the 2 reports
Thanks,
Gordon

Approval Status report

Dear All,
One of user not able to remove the rejected report
from Approval status report.
Regards
Aarati Kollur

The user is not supper user.
Yes problem is only that particular user.
Regards
Aarati

Approval status of PR is in process, but action history show 'Approve'

Dear all,
I am on EBS 11.5.10.2 and encountered a problem during the approval process of PR.
The approval hierarchy with PR is planner -> approver1 -> approver2,
and approver2 is the final approver.
Everything of the approval process is OK except that the action performed
by approver1 shown in Action History is 'Approve', but not the appropriate
'Forword'.
Sequence Performed By Action Approval Status
0 planner Submit
1 planner Forward In Process
2 approver1 Approve In Process <---- Here the 'Approve' action should be shown as 'Forward'
3 approver2 Approve Approved
Any ideas will be greatly appreciated!
Regards,
Henry Huang
Edited by: user8960428 on 2011-7-7 上午8:13
Edited by: user8960428 on 2011-7-7 上午8:15

For requisitions the action taken by the approver is recorded. If they click on Approve, the same is recorded in action history.Shivaraj, for POs with the similar position hierarchy, if the approve1 click on Approve, action history does show 'Forward'.
Do you mean the action taken by the approver1 is different between Requisitions and POs?
Edited by: user8960428 on 2011-7-12 上午8:03

PO still in Approval Status (Urgent)

Similar Messages

Maybe you are looking for