PO to be sent to multiple e-mail ids' of same vendor

Hi,
We are on 4.7.  When we transmit the PO through e-mail via 'external send' option, it is sending to one e-mail id of a particular vendor.  Even if there are multiple e-mail id's available for a vendor in the address details of vendor master, we have to flag one id to which the PO has to be sent. 
but our requirement is to send the PO to all the e-mail ids' available in the vendor master automatically.  any solution please.
regards,
mallik

Hello Mallik,
The starndard SAP functionality will use vendor's default email ID when you trigger email for purchase order. so I will suggest you to create one distribution list (take help from network guy/ admin which will include all email addresses of the vendor and mention this email address in vendor master record.
Hope this will help.
Regards
Arif Mansuri

Similar Messages

  • Sending an e-mail from SAP to multiple e-mail IDs

    I have a requirement where SAP should send e-mail to the main recipient and CC to three other recipients. The e-mail will have a PDF attachment of delivery document and the e-mail Ids are fetched from ''Storage Location'' definition maintained in customization under SPRO --> Enterprise Structure --> Definition --> Materials Management --> Maintain Storage Location. I can maintain multiple e-mail Ids here.
    However, as standard, SAP will set the indicator (or I can define) to one specific e-mail ID only and will send e-mail just to that e-mail ID.The requirement is that the e-mail Id with the indicator will be the main recipient, and all other e-mail Ids should be CCed.
    Can anyone advise how to go about this? Any OSS notes or any clue on ABAP devpt work please...
    Many Thanks in Advance
    Ravi.

    Hi
    You can have the PDFs kept in a spool. From the spool, you can send these documents through email by using the FM
    CONVERT_OTFSPOOLJOB_2_PDF
    You can also use the FM PLM_AUDIT_COM_SEND_PDF_AS_MAIL
    to create a new FM for your purpose.
    Rwd if it helps.
    Message was edited by:
            Navaneetha Krishnan

  • Multiple E-Mail id entry in vendor master in ECC6.0

    Hi,
    I have one issue related to multiple E-mail address entry in ECC6.0.  we upgreaded customer system from 4.6c to ecc6.0.
    1. In 4.6c, we have the provision to enter multiple E-mail ids continuously with comma seperating each id in the e-mail address field of vendor master where as in ecc6.0 system will through error message"invalid e-mail id" if you try to enter more than one e-mail id in the e-mail address field because ecc6.0 validates e-mail address field where as 4.6c dont validate this field entries.You have to enter one mail id at a time in the e-mail address maintenance popup and keep on adding one by one to maintain more than one id.
    2. So, what happens to the old vendor master records that were there in4.6c after upgrade. Do we need to change them to the compatible format with ecc6.0.If so, this is to be done manually one by one vendor master record or isthere a way to change all these records at time automatically.
    3. Is there a readily available SAP Note for this?
    Your help in this regard is much appreciated as this is an open issue in the upgrade process.
    Thanks & Regards
    Sundar

    I ever experience the same thing when upgarade from 4.7 to ECC6.0.It's because the send mail protocol using SMTP interface (you can ask detail about SMTP with the basis guy).
    in the vendor master email address per line, it cannot contain special character like comma, etc.
    Maybe you already know , that you can put the mail address in the next line record, but it will take a lot of efford to change all the mail address for vendors.And I'm not sure which one is the best way to handle this.we handle it by bypass the checking for the special character considering the go live situation, so the old email address still remain the same, and can be maintain in the old way.
    but in the future you better ask the vendor custodian team to maintain the email address per line (one email per record),then you can revert back the bypass check after that. maybe there's another way or method , but i dont  have any clue, maybe others can share their experience also.
    also you might face another issue for sending mail, we modify the logic to split the email address per comma.
    Below is several notes, maybe it can helps
    Note 721723 - Mail receipt: Error with special characters in addresses
    Note 1016127 - SMTP mail: Error when addresses have special character

  • Sending mail to multiple dynamic mail ids

    Hi Everyone,
    I have one query regarding sending mail to multiple table entry mail IDs. This table data I am getting from custom BO method vie multiline container element.
    Now my problem is I am getting Multiple mail IDs to workflow container from BO but  dont know how to send mails to those IDs and binding required for Send Mail step.
    Thanks.

    Hello,
    Please search before posting questions.
    Please google 'sap workflow send mail to multiple recipients' and you will find many responses.
    Let us know if there are any problems.
    regards
    Rick Bakker

  • Multiple APP run's for  same vendor

    Dear Friends,
    I would like to know whether it is possible to do multiple payment proposals for a vendor on same dates.
    here is the scenario:
    Each business area would like to creat and edit payment proposals for the same dates, for ex: Run date is 1.1.08, next payment date will be 02.01.08 and schedule the actul payment run on say 03.01.08.
    The actual payment runs will be processed by different paying coc.ode on 03.1.08
    so for a given vendor say we have 2 open items which are due for each business area. I tried giving Business area in free selections .
    when I try to create a secong payment proposal system gives me the message saying no payment proposal found for the co.code Message nO.FZ349
    Yes it does makes sense to this meesage in the sense system wants to check that no invoice is paid twice by mistake.
    But my question is since I am restricting open items by Busines area in the selection parameters itself shouldnt that be considered by system.
    Hope I am clear.
    Please let me know your inputs on the same.
    Points assured for useful replies.
    Thanks,
    Vamsi

    Hi Chandra,
    Thanks for your inputs.
    When you say that same vendor can be paid more than 1 once in a given day by APP, I belive you meant that once paymnet run has been done we can create another APP process for the same vendor.
    Yes I dont see any issues there.
    I also have no doubt that we can create multiple payment runs for a given vendor for 2 different co.codes on the same day.
    But the issue I have is a case of centralised payment for all regions  which are represented by Business areas.
    Each region will do business with the same pan india vendor and would like to create thier payment proposals. The payment runs for these proposals will be done by the head office.
    while trying to the second payment proposal, thi sis the message:
    "Vendor 54 222 is contained in proposal 24.01.2008 SB1; no editing"
    Hope I am clear.
    Thanks,
    Vamsi

  • Qemu/kvm: multiple USB devices from the same vendor

    Hi fellow gurus,
    Trying to pass-through two USB devices. One works just fine, but two produces an error.
    They are the same type from the same vendor and libvirt seems to have no way to differentiate between the two, as it only uses the <vendor id='0xnnnn'/> & <product id='0xnnn'/> strings and not serial number of the device.
    There is a reference -unanswered- here: https://bugs.launchpad.net/qemu/+bug/1090602
    The error message from virt-manager:
    Error starting domain: operation failed: Multiple USB devices for 10c4:ea60, use <address> to specify one
    Detailed output
    Traceback (most recent call last):
    File "/usr/share/virt-manager/virtManager/asyncjob.py", line 44, in cb_wrapper
    callback(asyncjob, *args, **kwargs)
    File "/usr/share/virt-manager/virtManager/asyncjob.py", line 65, in tmpcb
    callback(*args, **kwargs)
    File "/usr/share/virt-manager/virtManager/domain.py", line 1063, in startup
    self._backend.create()
    File "/usr/lib64/python2.6/site-packages/libvirt.py", line 678, in create
    if ret == -1: raise libvirtError ('virDomainCreate() failed', dom=self)
    libvirtError: operation failed: Multiple USB devices for 10c4:ea60, use <address> to specify one
    The devices themselves:
    Bus 001 Device 009: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light
    Bus 001 Device 008: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light
    Is there any workaround or fix for this?
    Cheers,
    Mike.
    Last edited by DrMikeDuke (2013-07-22 14:01:18)

    As I understand it, host:bus.addr is an alternative to host:vendor_id:product_id. So if I wanted to pass both of these thumb drives:
    $ lsusb
    Bus 001 Device 002: ID 1e3d:2093 Chipsbank Microelectronics Co., Ltd CBM209x Flash Drive (OEM)
    Bus 001 Device 003: ID 1e3d:2093 Chipsbank Microelectronics Co., Ltd CBM209x Flash Drive (OEM)
    I would use host:001.002 and host:001.003 . Note I said would use, because I've never tried it.
    And usb_add is a qemu monitor command. See sections 3.4 and 3.5 of the doc you linked for info on the monitor.
    All this being said, I don't use libvirt stuff so I don't know if it has the capability to specify USB devices by bus.addr or whether or not it enables the monitor.

  • Dnt want Auto Multiple Ship Costs items for Same Vendor

    Hi All,
    I have a problem..
    In my shipment my header as well as Legs are cost relevant.
    And i have given automatic determination of item categories in my shipment costs.
    Now the problem is when i have say 2 stages in my route den in my shipment costs
    determines 3 line items automatically and gives the same price for all based on the condition
    records..
    I dont want this to happen coz the charges are the same and paid once only.
    My scenario works fine if vendors are diffrent stage wise.
    But when the vendor is same for the entire route then this leads to duplication of costs.
    Plz any inputs on this.
    Rgds

    Hello,
    Where would I go to set different pricing for the item? We've negotiated different pricing for the same item number at different vendors? Right now the solution addresses only the allocation of product.
    With regards to the % split; let's say I set the split to 50/50. The Planners override mrp and create a PO for the full 100pcs to 1 vendor and not the system suggested 50pcs to vendor A and 50pcs to vendor B.
    Will the system be able to figure out that the allocation has been ignored and re-adjust? Will MRPto buy 100pcs at vendor B and 0pcs at vendor A?
    Or
    Will the system only look forward and say "Whatever the next requirement is, I'm splitting the order 50/50 between the 2 vendors"?
    Thanks again,
    BG

  • Multiple fax/email contacts for same Vendor - How to set it up for Output

    Hi All
    We have two different plant using same vendor A but their contacts are different.
    for example. Plant 1000 has the contact as Rep1 with fax 1 and email1
                       and Plant 2000 has the contact as Rep 2 with fax 2 and email 2
    We would like to send the PO output to corresponding contact persons w.r.t.plant.
    in our communication block in vendor master we have standard communication type to only one email address.
    Please suggest
    Thanks
    Sasi

    Hi
    In vendor master you need to use either vendor subrange or data retension at plant level. It is available in purchasing data additional view. (Check in top menu).
    Then you need to have partner function with different ordering address. Because for every vendor subrange or data retension at plant you can have different purcahsing data and partner function.
    Read SAP libraray and test in development cycle, it will help you.
    Regards
    Antony

  • Sending POu2019s to multiple e-mail addresses

    Hi Experts,
    Sending POu2019s to multiple e-mail addresses
    I having requirement to send pos to multiple e-mail addresses to single vendor.
    For vendor All the multiple mail ids can be stored in vendor master.
    Once we create the po by taking that vendor then mail has to trigger to all mail ids stored in that vendor.
    As of now in standard , once we save the po then the mail is triggering to one mail id.
    For this when I checked with my abap team they told that :
    u201CStandard function module which we have checked is connected to standard BOR method.
    It is not advisable to enhance the STD BOR method and there is no provision of enhancement points in the form where we need to do our changes.u201D
    So please help whether can we do any enhancement for this.
    Please suggestu2026
    Thanks in Advance
    Prashanth.V

    hai friend,
    please go through this example bcs_example8.
    <<code dump removed by moderator>>
    Moderator Message: Please respect the 5000-character per post limit.
    Edited by: kishan P on Nov 25, 2010 1:14 PM

  • Can any one tell me how to send one PO to mutilple mail ids in vendor maste

    Hi Experts,
    Can any one tell me how to send one PO as a mail to multiple vendors who are all maintained in my vendor master record
    Suppose I have 3 mail ids in my Vendor master record and I created a PO with that vendor, will that PO goes to all the three mail ids maintained in the vendor master record  or only to one ?
    Inorder to send to multiple mail ids, Do we need to do any configure any thing in SPRO settings functionally, if so where we have to maintain?
    Or shall an Abaper needs to maintain a code for that.?
    Please suggest me, I would appreciate your feed back.
    Best Regards,
    Sairam

    Go to XK02 enter the vendor code
    go to the communication tab
    Email will be there press the ---> button
    you can add many Emails in the list.
    Please ensure that the  message output is configured by
    the  SAP BASIS team
    No need of any configuration
    G.Ganesh Kumar

  • F110 Payment Proposal multiple payment lines for same vendor

    Hello,
    Question for the FI community regarding single payments for multiple invoices for the same vendor. Is there any other place that would dictate the grouping (or non grouping) of multiple payment proposal lines for same vendor payment?
    I understand that there are two places:
    FBZP - Change view 'Maintenance of Company Code Data for a Payment Method", the flag for 'Single payment for marked item'
    Vendor Master - Automatic payment transactions, flag for 'Individual pmnt'
    Is there anywhere else where this may be dictated? At my location, we have two company codes that make ACH payments, settings for FBZP (Single payment for marked item flag) and selected vendor for payment in the vendor master is identical. I get different results when viewing the payment proposal for each company code. Company Code A parses out individual line items for payment in the proposal, and Company Code B does not. When I change the flag via FBZP for Company Code A, this resolves the issue. When I make the same change for Company Code B, there is no change.
    In all of my testing, I have left the 'Individual pmnt' flag for both vendor masters unchecked.
    I'm hoping that somebody in the community here would be able to point me in the right direction to understand why I am getting differences. Is there somewhere else that I can check?
    Thanks everyone.

    Ravi,
    Thanks for your reply, however in my post I already mentioned I have tested out both options via FBZP as well as the vendor master. You are correct, in only one case regarding my situation.
    In my example for Company Code B, I have the following scenarios:
    1. FBZP - single payment for marked item checked, Vendor individual payment option not checked, result is a single payment item for multiple invoices
    2. FBZP - single payment for marked item checked, Vendor individual payment option is checked, result is multiple payment items for each invoice
    3. FBZP - single payment for marked item not checked, Vendor individual payment option not checked, result is a single payment item for multiple invoices
    4. FBZP - single payment for marked item not checked, Vendor individual payment option is checked, result is a multiple payment items for each invoice
    Are you saying that the option in FBZP simply enables the grouping/non grouping based on what the vendor master record payment option is? Typically, that option for vendors is not checked in either of our company codes, therefore if the only difference is the setting in FBZP, then why would I be getting only a single payment for multiple invoices in the case of scenario 1 listed above?
    That's why I am wondering if perhaps there is something elsewhere than FBZP and vendor master settings that could be affecting this.
    Comments please?

  • PO print sent to multiple mail id  via email

    Hi,
    We are using the standard output type NEU, medium 5 (external send).i maintained multiple mail id in single vendor master,
    i want to sent po print out for multiple mail id via email,after wt are all configurations do as a mm and abap consultant,plz
    suggest.
    Regards
    Sam

    Hi,
    You requirement is not specific.You want to print PO or want send PO via E-mail to vendor.
    You can maintain multiple E-mail ID's for a vendor master.In standard possible to send PO by e-mail to vendor to single e-mail ID ONLY. If you want to send PO by e-mail in multiple (e-mail) ID's, you can go for development with ABAPer for using of function module OR can work with group e-mail concept( check with system admin team).
    Regards,
    Biju K

  • Send AP payment advice e-mail to multiple e-mail addresses?

    Hello all,
    I implemented Business Transaction Event 2040 to determine whether a vendor payment advice should be paper or e-mail.  The SAP code that populates the e-mail address from the vendor's master record only uses the first e-mail address, regardless of how many e-mail addresses are entered.
    Have any of you found a way to send the e-mail to all of the addresses in the vendor master address table, ADR6, without making a modification to SAP's code?  I tried putting multiple e-mail addresses in the first address field.  The data validation that is being performed did not allow multiple addresses.
    When I asked this question of SAP, their answer was that there's nothing wrong and that they would be happy to charge for remote consulting to provide that functionality.
    I know that we could create a group e-mail address within our e-mail application for every vendor that wants the e-mail to be sent to multiple recipients.  Then enter that group e-mail address in the first line of the vendor master e-mail data.  I don't really want to do this because this would entail AP staff requesting to have that group set up and maintained by the staff that maintains the e-mail application. 
    Since we have the ability to enter multiple e-mail addresses for vendors, it seems like the payment advice e-mail that is generated should send an e-mail for every entry in the vendor master.
    Thanks
    Bruce

    Anil,
    We are using program RFFOUS_T to create the payment advice.  Your solution of copying that program and modifying it would work.  But I don't want to go to the time and trouble of doing that. 
    Because the volume of vendors that have multiple e-mail addresses is small, we'll just create group e-mail addresses in our e-mail application (Lotus Notes) and use that group e-mail address in the vendor master e-mail screen.
    SAP doesn't consider this an error.  At best it is a serious shortcoming.  I have a hard time believing that I'm the first or only customer that has asked about and for this.
    Thanks
    Bruce

  • RFQ sent to multiple vendor

    Hi Experts,
    I have a below scenario  ,
    I created a new out put type for sending RFQ through mail. but in vendor master i put multiple E-Mail id system not sent to all person only consider first E-Mail ID.
    Please share your Experience with me to solve the issue.
    Regards
    Aamir

    Hi
    It will send to only one email address but not neccasrily the first one. You can see a radio button (Standard) in email address column. System will send mail only to that.
    Standard Sender Address in this Communication Type
    Use
    If a user sends a message externally from the SAP System, their standard address is set as the sender address in the communication type used. This indicator is then important if several addresses are maintained for one communication type.
    Example
    In a mail system group, the users receive all messages in their Microsoft Exchange P.O. boxes. In the standard communication type of SAP users (Internet mail), the address of their Exchange P.O. boxes is set as the home address and their Internet address in the SAP System is set as the standard address.
    A user sends an Internet message from the SAP System. The standard address for the communication type Internet mail Bernhard.Braun  atSAP.company.com is used as the sender address. If a reply is sent to this address, the user receives it in his or her Exchange P.O. box that his or her home address refers to.
    Regards
    Antony

  • Cant find my user name/password and I'm told it's been sent to my e-mail...after 3 days no e-mail.

    I'm pretty furious. For days I've been attempting to contact anyone @ Mozilla/firefox. Reason: Last week I downloaded Firefox to replace IExplorer. Everything seems to work fine...EXCEPT...e-mail. E-mail via att.yahoo.com. It runs hideously slow. (It didn't do that w/ Internet Explorer.) I need to know how to fix it.
    When I've attempted to access support through Firefox "Get started..." "Get help"....etc. I've been requested to furnish "user name" and "password." Since I misplaced both, I requested Firefox to send it to me. The response I got was "...an e-mail (containing that information) "was sent to the e-mail location" I furnished.
    NOPE!! After several days and multiple access each day.....no e-mail from Mozilla/Firefox.
    At this point I'm about to share my experience w/ CNET and PC Mag. I must remind you that I'm about half computer stupid...but I learn easily.

    Since this message appeared here ([https://support.mozilla.org/questions/1018860]), I think that means your support account is active now and that you are successfully logged in. If you use the Edit Profile link, can you find the email account the site is using?
    https://support.mozilla.org/users/edit

Maybe you are looking for