PO User Exit which pass PR Number
Dear All
Is there any PO user exit which can pass the PR number while creating a PO by adopting a PR number.
Requirement is to check PR amount before saving the newly created PO. If possible also specify the PR field in user exit.
Thanks
Hi,
Try User Exit MM06E005,Implemente EXIT_SAPMM06E_012
PR number is passed in field TEKPO-BANFN.
Regards
Pole
Similar Messages
-
User exits which can be called from the bapi BAPI_ALM_ORDER_MAINTAIN
Hi Experts,
I was trying to change work orders using the BAPI_ALM_ORDER_MAINTAIN, but this does not allow me to update the order address, one way of updating the address is using recording, but i was looking for a way in which we can use some user exit which will be called from the BAPI so that i can update the address number in the final structure before the work order is saved (without having to go for recording)?Hi,
you have restrictions to this .
Refurbishment orders are not supported.
The estimated costs cannot be processed - only the estimated overall costs of the order.
Notification data cannot be processed with the order BAPI, even if the settings in Customizing are such that the orders and notifications can be maintained on one screen. However, the system will create a notification with the order if this is specified in the Customizing settings.
Permits cannot be processed.
The order addresses cannot be processed.
Individual partner addresses cannot be maintained.
Regards -
Find out user exits which should trigger while saving billing doc.(VA01)
Hi All,
please can u help me to find out user exits which should trigger while saving billing documents for VA01 transaction...I have already z report to find the user-exit for any transaction.I have tried in that also.
Reply
UlhasHi
Try these
USEREXIT_NUMBER_RANGE (Module pool SAPLV60A, program RV60AFZZ)
The internal number range used in the standard system is specified
in the billing type table and can be changed in this user exit. This
user exit is only called when the billing documents is created.
USEREXIT_ACCOUNT_PREP_KOMKCV (Module pool SAPLV60A, program
RV60AFZZ)
In this user exit additional fields for account determination that
are not provided in the standard system are copied into
communication structure KOMKCV (header fields).
USEREXIT_ACCOUNT_PREP_KOMPCV (Module pool SAPLV60A)
In this user exit additional fields for account determination that
are not provided in the standard system are copied into
communication structure KOMPCV (item fields).
USEREXIT_NUMBER_RANGE_INV_DATE (Module pool SAPLV60A, program
RV60AFZC)
Depending on the number range, table TVFKD is used to set the
billing date (country-specific requirments in Italy).
USEREXIT_NUMBER_RANGE is automatically deactivated when this user
exit is being applied.
USEREXIT_FILL_VBRK_VBRP (Module pool SAPLV60A, program RV60AFZC)
This user exit is only called when the billing document is created.
It is used to provide the header and the item of the new billing
document with deviating or additional data.
USEREXIT_PRINT_ITEM (Module pool SAPLV61A, program RV61AFZB)
Printing the item line of a billing document can be supplemented or
changed.
USEREXIT_PRINT_HEAD (Modulpool SAPLV61A, Programm RV61AFZB)
Printing the header line of a billing document can be supplemented
or changed.
User exits in program RV60AFZD
Short descriptions of the user exits are contained in the program:
- USEREXIT_RELI_XVBPAK_AVBPAK
- USEREXIT_NEWROLE_XVBPAK_AVBPAK
- USEREXIT_NEWROLE_XVBPAP_AVBPAK
e following user exits are available in report SAPLV60B for transfer
accounting (function group V60B):
EXIT_SAPLV60B_001: Change the header data in the structure acchd
You can use this exit to influence the header information of the
accounting document. For example, you can change the business
transaction, "created on" date and time, the name of the person who
created it or the transaction with which the document was created.
EXIT_SAPLV60B_002: Change the customer line ACCIT
You can use this exit to change the customer line in the accounting
document. This exit is processed once the ACCIT structure is filled
in with data from document header VBRK.
EXIT_SAPLV60B_003: Change the customer line in costing
The customer line is filled in differently for costing. You can use
exit 003 to influence the ACCIT structure.
EXIT_SAPLV60B_004: Change a GL account item ACCIT You can add
information to a GL account item (such as quantity specifications)
with this exit.
EXIT_SAPLV60B_005: User exit for accruals
Once all relevant data for accruals was entered in the GL account
item, you can add to this data with this exit.
EXIT_SAPLV60B_006: Change the control line ACCIT
You can use exit 006 to add information to the control line.
EXIT_SAPLV60B_007: Change the installment plan
You can use exit 007 to add information to the installment plan
parameters in the GL account item.
EXIT_SAPLV60B_008: Change the transfer structure ACCCR, ACCIT and
ACCHD
After the accounting document is filled in with data, you can use
exit 008 to change the document once again.
EXIT_SAPLV60B_010: Item table for customer lines
You can use exit 10 to influence the contents of customer lines
before they are created.
EXIT_SAPLV60B_0011: Change the parameter for cash account
determination or reconciliation account determination
You can use this exit to change inbound parameters in order to
influence account determination.
>
Thanks
Shiva -
Debug an USER-EXIT which is present inside an INCLUDE
Hi folks,
i want to debug a include ' LVEDFF0E.' which is present in the program 'SAPLVEDF.
my user exit 'ZXEDFU02' is present in the include LVEDFF0E . This exit is to change the IDOC segmants.
i want to debug my user exit which is present inside a include.i tried so many times but control is not going to that point.
can anybody tell me how to debug that exit???
correct answers will be rewarded.
Thanks & RegardsHi,
Try this way
/h> choose "breakpoints" from menu> breakpoint at >function module> enter EXIT_SAPLVEDF_002 and press enter press f8
a® -
Need User Exit which wll allow to display a error message
Hello All,
i need a User Exit in Tx ME21N .
When user try to drag multiple PR for PO at that instant only there should be an User Exit which will restrict the user to doing so with a error message.ME_CHECK_ALL_ITEMS
ME_CCP_ACTIVE_CHECK
MD_EXT_SUP
ME_DEFINE_CALCTYPE
MD_STOCK_TRANSFER
ME_PROCESS_PO_CUST
These are the BADIs gettting triggered while dragging the PR's to PO creation.
You can check any of these as per your requirement.
Check if the BADI 'ME_PROCESS_PO_CUST' is useful. -
Program/User exit to maintain the number ranges at plant level
Hi Everybody,
Could u please tell me program/user exit to maintain the number ranges at plant level.
Thanks & Regards,
PiyushHi
Do you want to maintain all the number range Objects
For Material Master you can use the enhancement MGA00002
For PO Nu,ber ranges you can use the enhancement MM06E003
Thanks & Regards
Kishore -
Can i know the user exits which should trigger while saving billing docu
hi,
please can u help me to find out user exits which should trigger while saving billing documents.A couple years ago I downloaded this program, I think from SAPFANS. I don't take any credit for it...Not sure who originally wrote it. Just type in the t-code and hit execute.
*& Report name : Identify and Drill-Down to SAP User Exits. *
*& Program name : ZZ_FIND_USER_EXITS *
REPORT ZZ_FIND_USER_EXITS
NO STANDARD PAGE HEADING
LINE-SIZE 132
LINE-COUNT 65
MESSAGE-ID MM.
D A T A D E F I N I T I O N *
TABLES : TSTC, " SAP Transaction Codes
TADIR, " Directory of Repository Objects
MODSAPT, " SAP Enhancements - Short Texts
MODACT, " Modifications
TRDIR, " System Table TRDIR
TFDIR, " Function Module
ENLFDIR, " Additional Attributes for Function Modules
TSTCT. " Transaction Code Texts
S E L E C T I O N S C R E E N *
PARAMETERS : P_TCODE LIKE TSTC-TCODE OBLIGATORY.
I N T E R N A L S T R U C T U R E S & T A B L E S *
DATA : GT_TADIR LIKE TADIR OCCURS 0 WITH HEADER LINE.
V A R I A B L E S *
DATA :
GV_FIELD1(30) TYPE C,
GV_DEVCLASS LIKE TADIR-DEVCLASS.
C O N S T A N T S *
CONSTANTS:
GC_F LIKE TRDIR-SUBC VALUE 'F',
GC_R3TR LIKE TADIR-PGMID VALUE 'R3TR',
GC_FUGR LIKE TADIR-OBJECT VALUE 'FUGR',
GC_SMOD LIKE TADIR-OBJECT VALUE 'SMOD',
GC_PROG LIKE TADIR-OBJECT VALUE 'PROG'.
R A N G E S *
RANGES:
GR_VKORK FOR WKBP-VKORG.
E V E N T P R O C E S S I N G *
INITIALIZATION.
AT SELECTION-SCREEN.
SELECT SINGLE PGMNA
INTO TSTC-PGMNA
FROM TSTC
WHERE TCODE = P_TCODE.
IF SY-SUBRC <> 0.
MESSAGE E899(MM)
WITH TEXT-E01 " Input Transaction Code is Invalid.
TEXT-E02. " Please Correct !!
ENDIF.
SELECT SINGLE TTEXT
INTO TSTCT-TTEXT
FROM TSTCT
WHERE SPRSL = SY-LANGU
AND TCODE = P_TCODE.
START-OF-SELECTION.
CLEAR GV_DEVCLASS.
SELECT SINGLE DEVCLASS
INTO GV_DEVCLASS
FROM TADIR
WHERE PGMID = GC_R3TR
AND OBJECT = GC_PROG
AND OBJ_NAME = TSTC-PGMNA.
IF SY-SUBRC <> 0.
SELECT SINGLE SUBC
INTO TRDIR-SUBC
FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC = GC_F. " Function Group
SELECT SINGLE FUNCNAME
INTO TFDIR-FUNCNAME
FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE AREA
INTO ENLFDIR-AREA
FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
CLEAR GV_DEVCLASS.
SELECT SINGLE DEVCLASS
INTO GV_DEVCLASS
FROM TADIR
WHERE PGMID = GC_R3TR
AND OBJECT = GC_FUGR
AND OBJ_NAME = ENLFDIR-AREA.
ENDIF.
ENDIF.
SELECT *
FROM TADIR
INTO TABLE GT_TADIR
WHERE PGMID = GC_R3TR
AND OBJECT = GC_SMOD
AND DEVCLASS = GV_DEVCLASS.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(36) TSTCT-TTEXT.
SKIP.
IF NOT GT_TADIR[] IS INITIAL.
WRITE:/(95) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Exit Name',
21 SY-VLINE ,
24 'Description',
95 SY-VLINE.
WRITE:/(95) SY-ULINE.
SORT GT_TADIR BY OBJ_NAME.
LOOP AT GT_TADIR.
SELECT SINGLE MODTEXT
INTO MODSAPT-MODTEXT
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = GT_TADIR-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/01 SY-VLINE,
02 GT_TADIR-OBJ_NAME HOTSPOT ON,
21 SY-VLINE,
22 MODSAPT-MODTEXT,
95 SY-VLINE.
ENDLOOP.
WRITE:/(95) SY-ULINE.
DESCRIBE TABLE GT_TADIR.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , SY-TFILL.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
AT LINE-SELECTION.
GET CURSOR FIELD GV_FIELD1.
IF GV_FIELD1(8) = 'GT_TADIR'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
ELSE.
MESSAGE I899(MM)
WITH TEXT-I01 " Click on the Exit Name to Drill-Down
TEXT-I02. " to SAP Enhancement Information.
ENDIF.
END-OF-SELECTION.
TOP-OF-PAGE.
S U B R O U T I N E S *
E N D O F R E P O R T **************************************** -
User Exit which runs after pressing SAVE button at VF01 Screen.
Dear all,
I need user Exit which runs after pressing SAVE button at VF01 Screen.
Kind Regards,If you search the forum, you can find plenty of threads on this, for example Re: Badi or user exit for VF01 while save Can you let the forum know what exactly you want to achieve using user exit during saving of a billing document?
Regards, -
Need a badi or user exit which can trigger tr:AR31
need a badi or user exit which can trigger tr:AR31 ,based on ANLA-AKTIV,ANLB-AFABG.AND COULD ANY ONE explain indetail
There is no BADi for AR31 but you can use Exit:
AINT0002 Substitution of offsetting accounts in out- and inflow ...
AINT0003 Defining percentage/amount of repayment by invest. support -
To find a user exit which update the Invoice header data
Hi,
I need a user exit which will update the invoice header data. For eg I need to update the fields RBKP_V-ESRNR and RBKP_V-ESRRE in table RBKP_V. I was using this user exit EXIT_SAPLMRMP_010 (Program ZXM08U16).But this is not working fine as this has no exporting parameter nor tables of structure RBKP_V.
I need for transaction MIRO.
Kindly help ...
Points will be rewarded
Thanks in advanceHi jayasree,
with the help of the below given program you can find out the requried user exit by giving the T code (MIRO).
*& Report Z_USEREXIT_DISPLAY *
Title : Display UserExits *
Transport Request No : *
Modification Log *
ModNo Date Consultant Description of Change(s) *
REPORT z_userexit_temp
NO STANDARD PAGE HEADING
LINE-SIZE 200
MESSAGE-ID zz.
T A B L E D E C L A R A T I O N S *
TABLES: tftit,
e071,
e070.
S T R U C T U R E D E C L A R A T I O N S *
TYPES: BEGIN OF x_tstc,
tcode TYPE tcode,
pgmna TYPE program_id,
END OF x_tstc.
TYPES: BEGIN OF x_tadir,
obj_name TYPE sobj_name,
devclass TYPE devclass,
END OF x_tadir.
TYPES: BEGIN OF x_slog,
obj_name TYPE sobj_name,
END OF x_slog.
TYPES: BEGIN OF x_final,
name TYPE smodname,
member TYPE modmember,
include(15), "Include name
END OF x_final.
I N T E R N A L T A B L E D E C L A R A T I O N S *
DATA: it_tstc TYPE STANDARD TABLE OF x_tstc WITH HEADER LINE.
DATA: it_tadir TYPE STANDARD TABLE OF x_tadir WITH HEADER LINE.
DATA: it_jtab TYPE STANDARD TABLE OF x_slog WITH HEADER LINE.
DATA: it_final TYPE STANDARD TABLE OF x_final WITH HEADER LINE.
V A R I A B L E S D E C L A R A T I O N S *
U S E R I N P U T S S C R E E N *
S E L E C T I O N S C R E E N *
SELECTION-SCREEN: BEGIN OF BLOCK blk01 WITH FRAME TITLE text-t01.
PARAMETERS: p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN END OF BLOCK blk01.
S t a r t o f S e l e c t i o n *
START-OF-SELECTION.
PERFORM get_tcodes. "Get Tcodes
PERFORM get_objects. "Get Objects
E n d o f S e l e c t i o n *
END-OF-SELECTION.
PERFORM display_results. "Display Results
*& Form get_tcodes
Get Tcodes
FORM get_tcodes.
SELECT tcode
pgmna
INTO TABLE it_tstc
FROM tstc
WHERE tcode = p_tcode.
IF sy-subrc = 0.
SORT it_tstc BY tcode.
ENDIF.
ENDFORM. " get_tcodes
*& Form get_objects
Get Objects
FORM get_objects.
DATA: l_fname LIKE rs38l-name,
l_group LIKE rs38l-area,
l_include LIKE rs38l-include,
l_namespace LIKE rs38l-namespace,
l_str_area LIKE rs38l-str_area.
DATA: v_include LIKE rodiobj-iobjnm.
DATA: e_t_include TYPE STANDARD TABLE OF abapsource WITH HEADER LINE.
DATA: l_line TYPE string,
l_tabix LIKE sy-tabix.
IF NOT it_tstc[] IS INITIAL.
SELECT obj_name
devclass
INTO TABLE it_tadir
FROM tadir FOR ALL ENTRIES IN it_tstc
WHERE pgmid = 'R3TR' AND
object = 'PROG' AND
obj_name = it_tstc-pgmna.
IF sy-subrc = 0.
SORT it_tadir BY obj_name devclass.
SELECT obj_name
INTO TABLE it_jtab
FROM tadir FOR ALL ENTRIES IN it_tadir
WHERE pgmid = 'R3TR' AND
object = 'SMOD' AND
devclass = it_tadir-devclass.
IF sy-subrc = 0.
SORT it_jtab BY obj_name.
ENDIF.
ENDIF.
ENDIF.
*- Get UserExit names
LOOP AT it_jtab.
SELECT name
member
INTO (it_final-name, it_final-member)
FROM modsap
WHERE name = it_jtab-obj_name AND
typ = 'E'.
APPEND it_final.
CLEAR it_final.
ENDSELECT.
ENDLOOP.
*- Process it_final contents.
LOOP AT it_final.
l_tabix = sy-tabix.
CLEAR: l_fname,
l_group,
l_include,
l_namespace,
l_str_area.
l_fname = it_final-member.
CALL FUNCTION 'FUNCTION_EXISTS'
EXPORTING
funcname = l_fname
IMPORTING
group = l_group
include = l_include
namespace = l_namespace
str_area = l_str_area
EXCEPTIONS
function_not_exist = 1
OTHERS = 2.
IF sy-subrc = 0.
IF NOT l_include IS INITIAL.
*- Get Source code of include.
CLEAR: v_include, e_t_include, e_t_include[].
v_include = l_include.
CALL FUNCTION 'MU_INCLUDE_GET'
EXPORTING
i_include = v_include
TABLES
e_t_include = e_t_include.
IF sy-subrc = 0.
LOOP AT e_t_include.
IF e_t_include-line CS 'INCLUDE'.
CLEAR l_line.
l_line = e_t_include-line.
CONDENSE l_line NO-GAPS.
TRANSLATE l_line USING '. '.
l_line = l_line+7(9).
it_final-include = l_line.
MODIFY it_final INDEX l_tabix TRANSPORTING include.
ENDIF.
ENDLOOP.
ENDIF.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM. " get_objects
*& Form display_results
Display Results
FORM display_results.
FORMAT COLOR COL_HEADING.
WRITE:/1(150) sy-uline.
WRITE:/ sy-vline,
2(23) 'Extension Name',
24 sy-vline,
25(39) 'Exit Name',
64 sy-vline,
65(74) 'Description',
140 sy-vline,
141(9) 'Include',
150 sy-vline.
WRITE:/1(150) sy-uline.
FORMAT RESET.
SORT it_final BY name member.
LOOP AT it_final.
CLEAR tftit.
SELECT SINGLE stext
INTO tftit-stext
FROM tftit
WHERE spras = 'EN' AND
funcname = it_final-member.
WRITE:/ sy-vline,
it_final-name COLOR COL_KEY, 24 sy-vline,
25 it_final-member, 64 sy-vline,
65 tftit-stext, 140 sy-vline,
141 it_final-include, 150 sy-vline.
WRITE:/1(150) sy-uline.
ENDLOOP.
Regards
Srinivas -
User exit which gets triggered when a line item is deleted in va02
Hello all,
I am unable to find a User exit which gets trigerred when i delete a line item from va02.If I use the User Exits for saving data in Include MV45AFZZ the screen field VBAP-POSNR for line item is not getting accessed.All i need to compare the line item texts. Which means if any of these texts change then i need to write my logic. But the screen field name for all the texts is the same.Please guide me.Hello,
Whever you perform any actions on the line item, we have the user exit in MV45AFZZ, userexitxvbap. Whenever the the item is deleted the UPDKZ value in XVBAP value is set to 'D', else since you are using the transaction VA02, any change is recorded in YVBAP(for old values) and XVBAP(for new values), so using this two internal table you can write any necessary logic.
BR
Sudhakar. -
User Exit which is triggered when we do the posting to accounting
Dear Guru,
Can any one provide list of User Exits which are triggred while Posting in accounting happens via MM transaction?
Regards,
SandeepHello
Go through the link
http://www.easymarketplace.de/userexit.php
Regards -
User-exit wich modify batch number in vl31n
Hi,
I have another question.
What is user-exit wich modify batch number in vl31n transaction ?
Regards,
Greg.Hi
Find the available exits with the following program:::
*& Report ZFINDUSEREXIT
report zfinduserexit.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir where pname = tstc-pgmna.
select single * from enlfdir where funcname =
tfdir-funcname.
select single * from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct where sprsl eq sy-langu and
tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
execute this code.
<b>type the transaction. u will get the user exits</b>
If there are no available user exits you could go for badi's.
To search for a badi, go to se 24 display class cl_exithandler. double click on method get_instance, get a break point on case statement. execute and start the required transaction in new session. look for variable exit_name. It would show the available badi's.
regards
ravish
<b>plz dont forget to reward points if helpful</b> -
MIGO user exit to get serial number
Hi Experrts:-
I need to change the status of serial number (equipment number ) during Migo (good receipt,Transfer posting).
I have checked all the user exits and number of badis but i am not getting serial number at run time if i get serial numbar
in exit od badi i will change the status
I have used following badi:-
MB_DOCUMENT_BADI
MB_MIGO_ITEM_BAdI
ThanksHi ,
m also using GET_SERNOS_OF_DOCUMENT
but not getting serial number.
need to get serial number in MIGO.
how to pass parameters to this fm.
KEYDATA-TASER = 'SER03' "Goods mvmnt
KEYDATA-SDAUFNR = ??
KEYDATA-POSNR = ??
CALL FUNCTION 'GET_SERNOS_OF_DOCUMENT'
EXPORTING
KEY_DATA =
TABLES
SERNOS =
EXCEPTIONS
KEY_PARAMETER_ERROR = 1
NO_SUPPORTED_ACCESS = 2
NO_DATA_FOUND = 3
OTHERS = 4
please guide.. -
User-exit to copy collective number from sales order to purchase order
Hi,
Can any one help me which user-exit/BADI is used to copy collective number from sales order to purchase order? please help me.
Thanks,
Alkahi
copy control would be the better option to choose.. but still u can a give a search in list below and opt for the right one..Refer to the link below..
http://www.planetsap.com/Userexit_List.htm
User exits for Sales order
1USEREXIT_DELETE_DOCUMENT
2USEREXIT_FIELD_MODIFICATION
3.USEREXIT_MOVE_FIELD_TO_VBAK
4.USEREXIT_NUMBER_RANGE
5.USEREXIT_SAVE_DOCUMENT
User exits for billing
1.USEREXIT_ACCOUNT_PREP_KOMKCV (Module pool SAPLV60A, program RV60AFZZ)
2.USEREXIT_ACCOUNT_PREP_KOMPCV
3USEREXIT_NUMBER_RANGE_INV_DATE (Module pool SAPLV60A, program RV60AFZC)
4USEREXIT_PRINT_ITEM (Module pool SAPLV61A, program RV61AFZB
5.USEREXIT_PRINT_HEAD (Modulpool SAPLV61A, Programm RV61AFZB)
Reward if Useful
Thanx & Regards..
Naren..
Maybe you are looking for
-
How do I save PSD files created in windows so MAC users can open and work
I have been designing photoshop files for sale to photographers online and all of my work has been created in a windows 7 system. I had a photographer contact me saying that the PSD was trouble to open and that the fonts would not work on his MAC com
-
SOAP Adapter XI 3.0 Response HTTP 402 ICM_HTTP_TIMEOUT
When i sent a soap request to a ext. Server all is fine. But at the moment to get the response following error come up. Error when receiving by HTTP (error code: 402, error text: ICM_HTTP_TIMEOUT). What is wrong? IP-address of the client: 169.254.25.
-
Connecting external speakers to TV model 50L2200U
I purchased a 3 pc speaker set that connects with the 1/8" audio jack. My problem is I can't disable the TV speakers and control the sound with my TV remote with the external amplified speakers hooked up. Any ideas?
-
WSAD: Evaluating JSP includes in JSP Preview
Hello. I am a newbie to WSAD 5.0 and am trying to figure out how to get it to Evaluate JSP includes when I select to preview the JSP. Right now it does not evaluate the include and just leaves that tag in the generated HTML code. Thanks, ->Dave
-
How to close external programs?
Hi there, in vbs is a command "ExtProgram(ExtProgramName, ExtProgramArg)" to start external programs. But how to close external programs when they finished its work? Is there a vbs-command for it? Is there a way when calling "cmd.exe" with a proper