PO Version Number not available in PO List displays (ME2L, ME2K, etc)

I have configured PO Version Management. My PO's are working as desired with proper output.
However, the PO Version Number is not displayed in my PO List Display tcodes (ME2L, ME2K, etc) nor is it available to add to the layout. I have configured the Scope of List for "BEST" (PO's) to include change documents. However, there is nothing when I go to ME2L for a PO that has 15 versions. I have verified that EKKO does contain the latest version number for this PO.
Have I missed a config step??

Thank you - I did post in MM once I realized I posted in SRM.
I realize that only the current version is displayed in these transactions. But I need to see the actual version number - no the history - just the current version number. We use these reports to supply our Internal Auditors with PO Data and they require to see the PO # and Version # without having to actually pull up each PO individually in the system.
I had assumed that since they use EKKO and EKKO contains REVNO that REVNO would be available in my layout and I could simply add it to the report. However, this is not the case.
Thanks,
Tonia

Similar Messages

PO Version not displayed in PO List Displays (ME2L, ME2K, etc)

I have configured PO Version Management. My PO's are working as desired with proper output.
However, the PO Version Number is not displayed in my PO List Display tcodes (ME2L, ME2K, etc) nor is it available to add to the layout. I have configured the Scope of List for "BEST" (PO's) to include change documents. However, there is nothing when I go to ME2L for a PO that has 15 versions. I have verified that EKKO does contain the latest version number for this PO.
Have I missed a config step??

Dear,
The data you are searching not available in EKKO table. We do it with
CDHDR - Header Change
CDPOS - Item Change
EREV - Version Change
Tables with help of ABAPer.
Regards,
Syed Hussain.

I cannot open iPhoto after upgrading latest apple updates. Getting a message latest iPhoto version is not available in the US

MacBook pro, 8GB, OSX Yosemite
I cannot open iPhoto after latest apple upgrade. Getting message latest iPhoto version is not available in the US.

Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
Install the App from the App Store.
Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

What features from previous versions are not available in Adobe Photoshop Elements 12?

What features from previous versions are not available in Adobe Photoshop Elements 12?
A handful of features from previous versions are not available in Photoshop Elements 12 due to new product support for 64-bit systems.
Below, we list the features and the easy alternatives available to you in version 12:
The Magic Extractor ToolAlternative: Use the Quick select tool together with the Refine Edge tool to quickly select and extract anything from your photos.
Texture Fill
Alternative: Use the Edit > Fill Layer option and select the "Pattern" option for Contents. You would have to pre load the pattern file with the texture you want.
Here is a tutorial on how to create a pattern file: http://www.hongkiat.com/blog/creating-custom-pattern-in-photoshop/
Frame from video (imports a frame from video in PremiereElements)Alternative: Use the freeze-frame feature in Premiere Elements to capture a frame in video and save it as a photo
Interactive layout mode in Photomerge PanoramaAlternative: None
Photoshop ShowcaseAlternative: Try Adobe Revel. Elements 12 will let you view and share your Elements photos and videos across smartphones, tablets, and the web, via Adobe Revel.
Enhance>Adjust Color>Color VariationsAlternative: None specifically, but you can use Auto Smart Tone
Filter>Render>Lighting EffectsAlternative: None

I thought Adobe staff only came here in their "spare time"?

I downloaded Yosemite and now my iPhoto has a bar across it and will not open. I need to update to the latest version. The app store says the latest version is not available in the Canadian Store. What can I do.

I downloaded Yosemite and now my iPhoto has a bar across it and will not open. I need to update to the latest version. The app store says the latest version is not available in the Canadian Store. What can I do.

Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
Install the App from the App Store.
Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

In manage add-ons, Adobe Flash Player is listed under Not Available, but is listed as enabled.

When trying to view something that needs flash player, it tells me that I need to have flash player to do this. So I go to install it, and it tells me it is already installed with my Windows 8. So, then it tells me to either Enable flash player or to disable Active x filtering. Active x filtering is not enabled, so I go to Manage add ons, and it shows that Shockwave Flash Object is listed under the heading NOT AVAILABLE, but is listed as being enabled. I have tried to reinstall flash player, but it won't let me because it is already installed. Not sure why it is showing up under Not Available, and not under the Adobe heading with my Adobe PDF reader. Can anyone tell me how to get flash player back from this point???

Please ask your question on a forum for the Flash Player

I have edit access to someone else's calendar. In iCloud i can add an event to this calender. In My calendar on my Mac I can see the calendar in the list, but when I try to add an event to this calendar, it is not avail from the list in event to select

I have edit access to someone else's calendar. In iCloud i can add an event to this calender. In My calendar on my Mac I can see the calendar in the list, but when I try to add an event to this calendar, it is not avail from the list in event to select. Any help appreciated. Thanks

Hi Chris,
You can't get rid of an alert. The least you can have is one that says "none".
Nevermind, I see you learned how to edit the event.

I'm trying to re-install an earlier version of a third party app I bought from App Store, version is not available anymore. The problem, 3rd party does not recognize my purchase ID, since I got it from App Store.

I'm trying to re-install an earlier version of a third party app I bought from App Store, version is not available anymore. The problem, 3rd party does not recognize my purchase ID, since I got it from App Store. My Mac Air Book is limited to update up to OS 10.6.8, unaware of updating the new version of Mac Cleanse I bought from App Store, this new version does not support my OS 10.6. How can the App Store provide me with an earlier version of Mc Cleanse?
Thanks,
jerson

It can't. That app is now lost to you.

AET Issue-Zfields are not available in the list of Reusable ZFields List

Hi Experts
I created and added Z fields using AET for Incident (SRQM_INCIDENT_H/IncidentHeaderEF VIEW).
Same Z fields I want use in Incident_SLA (SRQM_SLAPRO\ SLASRVCTRVIEW), I make utilize of Add Reusable Field button to choose the existing Zfields. But Zfields are not available in the list of existing ZFields for SRQM_SLAPRO\ SLASRVCTRVIEW.
Please help me in this scenario.
Thanks
Chand

This is almost same issue which makes me to reply here..
In Extension Object MKTPL_MPL, MKTPL_MPT I could reuse the fields which were defined in MKTPL_CPT.
And in Extension Object MKTPL_CPG, I could also reuse "some" fileds in MKTPL_CPT.
But some of fileds of MKTPL_CPT which were already reused in MKTPL_MPL, MKTPL_MPT were not displayed in the reusable fields list for MKTPL_CPG.
In AXTREG, The BOP and Extention location is same like below.
Can you please explain to me why I cannot see the fields in the list? or, what should I check in the system?
[in AXTREG]
BO : MKTPL_CPT
Reference BO : MKTPL_CP
BOP : Header
Extension Location : INCL_EEW_MKTPL_HEADER
BO : MKTPL_CPG
Reference BO : MKTPL_CP
BOP : Header
Extension Location : INCL_EEW_MKTPL_HEADER
BO : MKTPL_MPL
Reference BO : MKTPL_MP
BOP : Header
Extension Location : INCL_EEW_MKTPL_HEADER
BO : MKTPL_MPL
Reference BO : MKTPL_MP
BOP : Header
Extension Location : INCL_EEW_MKTPL_HEADER
Many thanks and regards,
Soyeon

WRT54G Version number not shown on sticker underneath the device?

Hi All,
First post.. I had looked through the FAQ w/o any answers.
I have had my WRT54G for at least 3 years and had previously upgraded my firmware to 4.20.7.. just wanted to upgrade it again to 4.21.1 but acutally did not realize which version of the firmware I last used. Looking at the sticker underneath the device, it only shows WRT54G but does not show a version number... are there any other places where the version number is shown? I looked all over but was unable to do so.
I supposed my version must be the "earlier" ones... are they "bad" consequences for flashing the wrong version number's firmware?
Thank you all in advance.

If it does'nt have a version with the model number of your router...then it is a version 1.... you can also verify this by the serial number....you can lookup wikipedia and find WRT54G there....they have a listing of these serial numbers with corresponding version numbers....but if you can see now that it does not have a version, pretty sure its a version 1....
"You tried your best and you failed miserably! "

Installed SQL Reporting Services 2012 on SharePoint 2013 Server. SQL Reporting Service not available In the list of runnning services or new service applications

Hi I'm trying to setup SQL reporting services in a SharePoint 2013 farm consisting of:
4 WFE's
4 App Servers (NLB Central Admin x 4 servers)
4 App Severs for SSRS (Light limited SharePoint services running)
I've installed SSRS 2012 SP1 by following the guide (http://msdn.microsoft.com/en-us/library/gg492276.aspx) on one of the SSRS SharePoint 2013 servers and ensuring Reporting Services - SharePoint and Reporting Services Add-in for SharePoint Products is selected.
All completed without errors and I have even upgraded to SP2 for troubleshooting but no joy.
I've then gone into SharePoint Central Admin and I cannot see SQL Reporting Service available In the list of runnning services on the server I have just installed SSRS on and going to manage service applications I cannot see in the new dropdown menu SQL
Reporting Services.
I have ran the following commands in the SHarePoint management shell:
Install-SPRSService and Install-SPRSSeviceProxy
and
get-spserviceinstance -all |where {$_.TypeName -like "SQL Server Reporting*"} | Start-SPServiceInstance
The reply was that the service was already online on the server.
So in powershell all seems ok but it does not appear in central administration.
I have also moved Central Administration to the SSRS SharePoint server too.
Any other suggestions? Here is the same problem but in SP2010 (http://social.technet.microsoft.com/Forums/office/en-US/6a21cc05-1f9b-49ad-a9bb-44aa5b3ce312/action?threadDisplayName=after-installing-sql-reporting-services-service-for-sharepoint-2012-service-is-not-in-the-list-of)
In my lab environment of a 4 server SP2013 farm it worked immediately when i installed it on the app server (CA host) so I dont think it is my install strategy.
I guess my next attempt is to install SSRS on an app server with central administration hosted.
Thanks

I had the same issue on 2 different environments.
I had 2 application servers. One had Central Administration. I installed SSRS on the other one and it never appeared in the Service Applications in SharePoint.
When I also provisioned Central Administration on the other application server and went to the service applications using Central Admin on that server, the SSRS service application was there.
Since then I always install SSRS on the server which hosts Central Admin. No issues then.

In Windows 8, under manage add-ons, Flash player is listed under the heading Not Available, but is listed as being Enabled.

I Try to reinstall it but it tells me it is already pre-installed with my windows 8 and to turn off active x filtering or to enable it in manage add ons. Active x filtering is not on, and it is currently enabled, it is just listed under the Not Available heading and I am guessing that is why it is not working when I go to view something that needs flash player. Is there a way to uninstall it and reinstall it going around the windows preinstalled?? Or a way to get it out of the Not Available and into the Adobe heading in my add-ons??

What you can do is either Reset IE (Gear > Advanced > Reset), or if that doesn't work, you'll need to go into Add/Remove programs, find the last Windows Update for Internet Explorer or Flash, uninstall it, then re-install it from Windows Update. This will usually get you back to a good state with IE.

Production Version Value Not available in AFPO

Dear All,
in AFPO table Production Version Field is available but with out value.. what could be the reason. if i need value what i need to do.. Please advice.
Thanks you.
Best Regards,
Suresh

check the following
PV is created after order is created.
When creating production order you have not selected PV.
If the setting is made in MRP4, selection method = 3
or
in img OPL8
Planning tab master data-->PV = make it zero = 0
The production order created cannot be changed, if possible reverse it and read the master data again after creating the PV.
please come back if you need clarrification

HT1600 Update version 6 not available in Canada?

After turning on AppleTv 3, it said update available and started to download something. After about 20 min. a message came saying update failed.
Checked under Software Update in General, it said Software up to date, however checking the software version # revealed #5.xx.
What gives?
I guess the latest update (# 6) is not available in Canada

It's more to do with the fact that the 6.0 update has been made unavailable due to some issues some users have experienced. I gather then, that in-between your ATV telling you there was an update available, and you trying to download it, the update had been withdrawn temporarily. Don't worry about it, carry on, as you were. When it next notifies you that there's an update available - wait. Wait a while before updating. Check this forum to see if there are any reported problems before making your next move.

Bought music in store but says not available in music list, I see it but can not play it

What is going on? Home sharing is on, a lot of music has titles that I previously bought in istore, yet the music is not available to play... What am I doing wrong? I am on Yosemite and have the latest version of IOS and apps and what more one can need...

https://dl-web.dropbox.com/get/Screenshots/Screenshot%202015-03-24%2015.46.40.pn g?_subject_uid=15410267&w=AADONHNfgxfk9X…
is where you can see a screendump of the problem

PO Version Number not available in PO List displays (ME2L, ME2K, etc)

Similar Messages

Maybe you are looking for