PO with positions not replicated in R/3

Hi Gurus,
we've implemented SAP SRM on an extended classic scenario with R/3 as the back-end system.
When I create a PO in which I create new positions by copying a deleted position, these are not replicated in the back-end system.
So, for instance, in a PO with 5 positions, I delete the last one and then I copy it.
I get an order with 6 positions: one of them is deleted, so the actual positions are just 5. When the order is completely approved, it is replicated in the R/3 system with just 4 positions!!!!
Could anyone give me an hand, please?
Thank you very much.
Regards,
Giovanni Ottavio Lo Brutto

Hello John,
Please check the document status in BBP_PD transaction.
If there is something like transfer error, goto RZ20 and check error message in  Purchase Oder node.
Regards,
masa

Similar Messages

  • Business Partner with Classification not replicated from CRM to ECC

    Dear CRM gurus,
    We have a problem with the replication of Business Partner from CRM to the ECC system. Here's the story:
    When we create a Business Partner (General) in CRM, it gets replicated to ECC. But when we create a Sold-to-Party Business Partner with Classification Customer, it does not get replicated to ECC. Can anyone of you advice to me what could be the possible error in the configuration? I have already make the neccessary mapping in tcode PIDE.
    In ECC system, do we have to maintain the same number range value for SD customer AND also for Business Partner?
    Desperately need help! Points will be generously rewarded.

    Hi guys,
    most likely your field settings on the ECC side for the different BP role will be different. I assume you will have a mandatory field for the sold-to party role in ECC that yo don't provide during the replication. If you check the BDOC errors in txn SMW01 it will give you an error "fill in all required fields".
    One standard stumbling block is the field "language key" under communication data....
    I hope that's what is causing the problem
    cheers
    Jens

  • How to make customize Replace function with Positions not pattern ?

    Hi
    Due to Repalce with patterns in  flex, i am facing issue.
    I  want to make cutomize replace function with  parameters
    1 Parameter - String to replace
    2 Parameter - Start Posion.
    3 Parameter - Last position
      which return string value.
    For Example
      replaceInWholeString(str:String, sPos:Number, lPos:Number ):String
    values like
    1st paramter - "asked"
    2nd Paramter - 11
    3rd Paramter -  15
    Original String :: I want to reply
    Output string : I want to asked
    Please Reply ,if someone having solution
    Thanks
    Sunil Rana

    You can use any number of the String methods to acomplish this.
    I would proabably go with something like: slice(...) + input + substr(...);

  • BP created with category Person and BP Role Consumer is not replicated

    Hello Gurus,
    I have created a BP with Category Person and BP Role Consumer but after saving my BP is not getting
    replicated to ERP, though in the Clasification Tab i could see consumer is being selected and the Account
    group 0170 - Consumer showing up. 
    I have also checked in PIDE transaction in ERP system this Account group has clasification E which is Consumer.person,and as numbe range is assigned to this Account group 
    i have checked in middleware there is an error message which says "BP XXXX doesnt not exist as customer,change not possible" and aslo one more message which says "no classification is assigned to BP"
    any customizing is missing in CRM system, or only customiaing required is in ERP only?
    Thanks and Regards
    chandu

    Hi,
    With respect to your question on below link.
    Re: BP created with category Person and BP Role Consumer is not replicated
    Please find the below path in ECC
    SPRO>Logistic General>Business Partner>Customer>Define Account Groups and Field Selection for Customers.
    Select 0170 Consumer account grp and click on details. You will see the Number range in General Data.
    Copy that number range and goto below path and check if the number range is internal or external.
    SPRO>Logistic General>Business Partner>Customer>Define and Assign Customer Number ranges. The popup will appear and select Define Number ranges for customer master. Click on display intervals. You will see the number range is mainatined internal or external.
    Hope this helps.
    Regards,
    Chandrakant
    Edited by: Chandrakant A on Dec 15, 2009 7:41 PM

  • Data not replicated with partition and dynamic calc

    HI
    I am using Essbase 11.1.2.1.
    I want to use a replicated pratition wetween two Essbase BSO applications.
    But in my source application, I have to send an account ACCOUNT (level 1) with several stored members and 1 dynamic calc member with formula. Due to this Dynamic calc account, the partition doesn't work (data are not replicated).
    How could I do?
    Thanks
    Fanny

    You're right, dynamic calc account are not issues. I am using them in partition.
    But py issue is there :
    The source dimension is like this :
    TAX (Dynamic Calc)
    - 6xxxxxxx
    - 6yyyyyyy
    - 6zzzzzzz (Dynamic Calc) = formula
    The target dimension is like this :
    TAX
    And so I need to send TAX (Source) to TAX (cible).
    I don't think it is possible, but I would like a confirmation before using something else.
    I hope it is clearer now.
    thanks
    Fanny

  • Contract not replicated with IDE flag checked

    hi all,
    I am working on CRM 7.0 . I have done all the neccessary middleware configuration for replication . Now problem is if i turned off the market communication , then contract gets replicated into the ISU system but if market communicationis turned on then contarct is created in CRM bot not replicated into the ISU .
    In SMW01 it shows information message " ERP adapter called"  and 'No upload to ERP".
    Please help me to reolve the issue.
    thanks ,
    ashish

    solved!!!!!!!!!!!!!!!!!1

  • Organisation Structure is not replicating completely from R/3 to CRM

    Hi SAP Gurus,
    Plaese help me out in this issue.
    We are replicating organisation structure from R/3 to CRM. There is Org Structure in which there are some sub org units say 6, under main org unit with positions and jobs. When try to replicating by tcode PFAL with evaluation path OS-CP, it geneartes IDOC in R/3, all are succesfully processed and Green. IN CRM, these Idocs are red and yellow with staus 51 and 52. As a result of this partial, org structure is replicated to CRM. In CRM, the Idoc is failed and It shows following errors:-->
    1. Resource key 4AFBD7B949F406E9E10000000B7404B7 is not known (Status 51)
    2. HR: ALE inbound processing for HR master data (Status 52)
    3. No Filter, No Conversion, No Field converted.
    Plaese advice to resolve this issue.
    Thanks a lot,
    Kind Regards
    Ash
    Edited by: Raman Khatri on Nov 23, 2009 2:43 PM
    Edited by: Raman Khatri on Nov 23, 2009 2:47 PM

    You can copy exactly error ??..
    For replication you need use tx PIDE in R3.
    In folder CRM>R3 you assign "BP Classification: Consumer, Customer, Sales prospect, competitor" to account group in R3. The BP Classification is hard code in CRM and only are available 5 types of classification.
    In folder R3> CRM you assing Account group R3 to CRM Classifcation and grouping. Grouping CRM is done in SPRO > Cross-Application Components >SAP Business Partner > Basic Settings > Number Ranges and Groupings > Define Groupings and Assign Number Ranges.
    Then, you define filter for replication in tx R3AC1 and replicate with tx R3AS

  • Some Sales Orders are not replicating into CRM

    Hi guys,
    when I check SMQ2 in CRM,  I find that some sales orders are not replicating into CRM, then check the error, its says check SMW01..
    when I check the SMW01 it says validation error and BDOC status is F05 (information no processing). I tried to search the sales order in CRMD_Order transaction could not find the sales order...
    *Error in SMW01*
         Processing of document with Guid E01D11C71856C4F1AEBF0024E84DD0CE is canceled     CRM_ORDER
         Validation error occurred: Module CRM_DOWNLOAD_BTMBDOC_VAL, BDoc type BUS_TRANS_MSG.     SMW3
    It's not giving much clue what's the error is...
    I tried to setup a request to replicate those sales orders.. those request also end up in the same error...
    any help on this?
    thanks,
    Ken

    Hello Ken,
    When reprocessing a BDoc(via SMW01) you might need to set a flag.
    Goto trxn. SMW01. Start the debugger using command '/h' and reprocess the BDoc. After going into the debug mode press SHIFT+F7 and put a breakpoint at 2nd Tab in : class:cl_smw_flow and method 'restart_processing'. Keep debugging(F5 or F6 accordingly) until you find the requisite flag l_retry_allowed and set it as 'X'. This will allow you to reprocess the Bdoc.
    Thanks,
    Rohit

  • The changes made in the WAD web template is not replicating on web browser

    Hi,
    We are using BI 7.0 WAD. Suppose if i create a one web template and if i run it ...it is working fine.
    If i change the present web template and if i do change anything on the present web template and if run this web template it is giving the previous result....it is not reflecting the present changes.
    The changes made in the WAD web template is not replicating on web browser result.
    I went to transaction SMICM, then choose "Goto" from the top menu. From there, go to HTTP Server Cache, then choose Invalidate, then choose Global in system. With this thing also it didnt slove.
    thanks

    Clear your browser cache also and see if the changes are visible.....
    Arun

  • How to reconcile A/P invoices on vendor with positive balance (they own us

    Hi there,
    I have two questions on B1.
    I posted an A/P invoice to a vendor with positive balance (they own us money). How do I close this A/P invoice without outgoing payment? I don't want to pay them because they own us money on A/P G/L account.
    There is another situation, I posted an A/P credit memo with large amount ($1000) and an A/P invoice with small amount ($200) on same vendor. How do I close the A/P invoice to that A/P credit memo with offset amount?
    Thanks for help!
    David

    Hi there,
    We are using B1 2005A SP1. I create an A/P invoice from a vendor which owns us money. So I don't want to pay this invoice. How do I close this invoice?
    The other question is, how to I offset an open A/P invoice with small amount to an A/P credit memo created before (not linked to any other A/P invoice) with large amount and close the A/P invoice?
    I am sure about the accounting rules on this issue. We are a Canadian company.
    Thanks a lot
    David

  • AD Replication issues, SYSVOL / NETLOGON not replicating

    Hello Experts!
    We have a client that recently called us for some assistance. The IT department had a new virtual environment stood up. They Created 3 new VMs and promoted them all to domain controllers. The current domain and forest functional levels are (and were) Server
    2003. There were two existing domain controllers, both Server 2003. The new domain controllers are Server 2012 R2. After promoting the 3 new servers to DC’s, they demoted one of the old DC’s. Then they transferred FSMO roles to a new 2012 R2 DC. When they
    went to demote the last server 2003 DC, it was giving them the error that it is the last DC in the domain. That’s when we were called to assist. I have since demoted 2 of the 3 new 2012 R2 DCs and transferred all FSMO roles back to the Server 2003 DC.
    I have been running some tools to try and gather data. Here is the DCDIAG from the last Server 2003 DC:
    C:\Documents and Settings\user>dcdiag /fix
    Domain Controller Diagnosis
    Performing initial setup:
       Done gathering initial info.
    Doing initial required tests
       Testing server: domainname\server2003server
          Starting test: Connectivity
             ......................... server2003server passed test Connectivity
    Doing primary tests
       Testing server: domainname\server2003server
          Starting test: Replications
             ......................... server2003server passed test Replications
          Starting test: NCSecDesc
             ......................... server2003server passed test NCSecDesc
          Starting test: NetLogons
             ......................... server2003server passed test NetLogons
          Starting test: Advertising
             ......................... server2003server passed test Advertising
          Starting test: KnowsOfRoleHolders
             ......................... server2003server passed test KnowsOfRoleHolders
          Starting test: RidManager
             ......................... server2003server passed test RidManager
          Starting test: MachineAccount
             ......................... server2003server passed test MachineAccount
          Starting test: Services
             ......................... server2003server passed test Services
          Starting test: ObjectsReplicated
             ......................... server2003server passed test ObjectsReplicated
          Starting test: frssysvol
             ......................... server2003server passed test frssysvol
          Starting test: frsevent
             There are warning or error events within the last 24 hours after the
             SYSVOL has been shared.  Failing SYSVOL replication problems may cause
             Group Policy problems.
             ......................... server2003server failed test frsevent
          Starting test: kccevent
             ......................... server2003server passed test kccevent
          Starting test: systemlog
             An Error Event occured.  EventID: 0x0000410B
                Time Generated: 02/18/2015   19:27:04
                Event String: The request for a new account-identifier pool
             An Error Event occured.  EventID: 0xC4350607
                Time Generated: 02/18/2015   19:28:22
                Event String: Component: System Information Agent
             An Error Event occured.  EventID: 0xC00110CD
                Time Generated: 02/18/2015   19:28:22
                (Event String could not be retrieved)
             An Error Event occured.  EventID: 0x00072787
                Time Generated: 02/18/2015   19:28:22
                Event String: The WinRM service is unable to start because of a
             An Error Event occured.  EventID: 0xC0060024
                Time Generated: 02/18/2015   19:28:34
                (Event String could not be retrieved)
             An Error Event occured.  EventID: 0xC0002720
                Time Generated: 02/18/2015   19:32:26
                (Event String could not be retrieved)
             An Error Event occured.  EventID: 0xC25A001D
                Time Generated: 02/18/2015   14:33:27
                (Event String could not be retrieved)
             An Error Event occured.  EventID: 0x825A0011
                Time Generated: 02/18/2015   14:33:28
                (Event String could not be retrieved)
             An Error Event occured.  EventID: 0x825A0011
                Time Generated: 02/18/2015   14:33:31
                (Event String could not be retrieved)
             An Error Event occured.  EventID: 0x0000410B
                Time Generated: 02/18/2015   14:36:18
                Event String: The request for a new account-identifier pool
             An Error Event occured.  EventID: 0xC4350607
                Time Generated: 02/18/2015   14:38:48
                Event String: Component: System Information Agent
             An Error Event occured.  EventID: 0x00072787
                Time Generated: 02/18/2015   14:38:48
                Event String: The WinRM service is unable to start because of a
             An Error Event occured.  EventID: 0xC4350505
                Time Generated: 02/18/2015   14:38:54
                Event String: NIC Agent: Connectivity has been lost for the NIC
             An Error Event occured.  EventID: 0x825A0011
                Time Generated: 02/18/2015   14:39:00
                (Event String could not be retrieved)
             An Error Event occured.  EventID: 0x825A0011
                Time Generated: 02/18/2015   14:39:14
                (Event String could not be retrieved)
             An Error Event occured.  EventID: 0x0000168E
                Time Generated: 02/18/2015   14:39:54
                Event String: The dynamic registration of the DNS record
             An Error Event occured.  EventID: 0x0000168E
                Time Generated: 02/18/2015   14:39:54
                Event String: The dynamic registration of the DNS record
             An Error Event occured.  EventID: 0x0000168E
                Time Generated: 02/18/2015   14:39:54
                Event String: The dynamic registration of the DNS record
             An Error Event occured.  EventID: 0x0000168E
                Time Generated: 02/18/2015   14:39:54
                Event String: The dynamic registration of the DNS record
             An Error Event occured.  EventID: 0x0000168E
                Time Generated: 02/18/2015   14:39:54
                Event String: The dynamic registration of the DNS record
             An Error Event occured.  EventID: 0x0000168E
                Time Generated: 02/18/2015   14:39:54
                Event String: The dynamic registration of the DNS record
             An Error Event occured.  EventID: 0x0000168E
                Time Generated: 02/18/2015   14:39:54
                Event String: The dynamic registration of the DNS record
             An Error Event occured.  EventID: 0x0000168E
                Time Generated: 02/18/2015   14:39:54
                Event String: The dynamic registration of the DNS record
             An Error Event occured.  EventID: 0x0000168E
                Time Generated: 02/18/2015   14:39:54
                Event String: The dynamic registration of the DNS record
             An Error Event occured.  EventID: 0x0000168E
                Time Generated: 02/18/2015   14:39:54
                Event String: The dynamic registration of the DNS record
             An Error Event occured.  EventID: 0x0000168E
                Time Generated: 02/18/2015   14:39:54
                Event String: The dynamic registration of the DNS record
             An Error Event occured.  EventID: 0x0000168E
                Time Generated: 02/18/2015   14:39:54
                Event String: The dynamic registration of the DNS record
             An Error Event occured.  EventID: 0x0000168E
                Time Generated: 02/18/2015   14:39:54
                Event String: The dynamic registration of the DNS record
             An Error Event occured.  EventID: 0x0000168E
                Time Generated: 02/18/2015   14:39:54
                Event String: The dynamic registration of the DNS record
             An Error Event occured.  EventID: 0x0000168E
                Time Generated: 02/18/2015   14:39:54
                Event String: The dynamic registration of the DNS record
             An Error Event occured.  EventID: 0x0000168E
                Time Generated: 02/18/2015   14:39:54
                Event String: The dynamic registration of the DNS record
             An Error Event occured.  EventID: 0x0000168E
                Time Generated: 02/18/2015   14:39:54
                Event String: The dynamic registration of the DNS record
             An Error Event occured.  EventID: 0x0000168E
                Time Generated: 02/18/2015   14:39:54
                Event String: The dynamic registration of the DNS record
             An Error Event occured.  EventID: 0x0000168E
                Time Generated: 02/18/2015   14:39:54
                Event String: The dynamic registration of the DNS record
             An Error Event occured.  EventID: 0x0000168E
                Time Generated: 02/18/2015   14:39:54
                Event String: The dynamic registration of the DNS record
             An Error Event occured.  EventID: 0x0000168E
                Time Generated: 02/18/2015   14:39:54
                Event String: The dynamic registration of the DNS record
             An Error Event occured.  EventID: 0x0000168E
                Time Generated: 02/18/2015   14:39:54
                Event String: The dynamic registration of the DNS record
             An Error Event occured.  EventID: 0x0000168E
                Time Generated: 02/18/2015   14:39:54
                Event String: The dynamic registration of the DNS record
             An Error Event occured.  EventID: 0x0000168E
                Time Generated: 02/18/2015   14:39:54
                Event String: The dynamic registration of the DNS record
             An Error Event occured.  EventID: 0x0000168E
                Time Generated: 02/18/2015   14:39:54
                Event String: The dynamic registration of the DNS record
             An Error Event occured.  EventID: 0x0000168F
                Time Generated: 02/18/2015   14:42:09
                Event String: The dynamic deletion of the DNS record
             An Error Event occured.  EventID: 0x0000168F
                Time Generated: 02/18/2015   14:42:09
                Event String: The dynamic deletion of the DNS record
             An Error Event occured.  EventID: 0x0000168F
                Time Generated: 02/18/2015   14:42:09
                Event String: The dynamic deletion of the DNS record
             An Error Event occured.  EventID: 0x0000168F
                Time Generated: 02/18/2015   14:42:09
                Event String: The dynamic deletion of the DNS record
             An Error Event occured.  EventID: 0xC25A001D
                Time Generated: 02/18/2015   14:42:10
                (Event String could not be retrieved)
             An Error Event occured.  EventID: 0x825A0011
                Time Generated: 02/18/2015   14:42:22
                (Event String could not be retrieved)
             An Error Event occured.  EventID: 0x825A0011
                Time Generated: 02/18/2015   14:42:37
                (Event String could not be retrieved)
             An Error Event occured.  EventID: 0xC4350607
                Time Generated: 02/18/2015   14:48:03
                Event String: Component: System Information Agent
             An Error Event occured.  EventID: 0x00072787
                Time Generated: 02/18/2015   14:48:03
                Event String: The WinRM service is unable to start because of a
             An Error Event occured.  EventID: 0x00000457
                Time Generated: 02/18/2015   14:50:06
                (Event String could not be retrieved)
             An Error Event occured.  EventID: 0x00000457
                Time Generated: 02/18/2015   14:50:06
                (Event String could not be retrieved)
             An Error Event occured.  EventID: 0x00000457
                Time Generated: 02/18/2015   14:50:06
                (Event String could not be retrieved)
             An Error Event occured.  EventID: 0x00000457
                Time Generated: 02/18/2015   14:50:07
                (Event String could not be retrieved)
             An Error Event occured.  EventID: 0x00000457
                Time Generated: 02/18/2015   14:50:07
                (Event String could not be retrieved)
             An Error Event occured.  EventID: 0x00000457
                Time Generated: 02/18/2015   14:50:07
                (Event String could not be retrieved)
             An Error Event occured.  EventID: 0x00000457
                Time Generated: 02/18/2015   14:50:07
                (Event String could not be retrieved)
             An Error Event occured.  EventID: 0x00000457
                Time Generated: 02/18/2015   14:50:07
                (Event String could not be retrieved)
             An Error Event occured.  EventID: 0x00000457
                Time Generated: 02/18/2015   14:50:07
                (Event String could not be retrieved)
             An Error Event occured.  EventID: 0x00000457
                Time Generated: 02/18/2015   14:50:07
                (Event String could not be retrieved)
             An Error Event occured.  EventID: 0x40000004
                Time Generated: 02/18/2015   14:55:30
                Event String: The kerberos client received a
             An Error Event occured.  EventID: 0x00000457
                Time Generated: 02/18/2015   15:11:36
                (Event String could not be retrieved)
             An Error Event occured.  EventID: 0x00000457
                Time Generated: 02/18/2015   15:11:37
                (Event String could not be retrieved)
             An Error Event occured.  EventID: 0x00000457
                Time Generated: 02/18/2015   15:11:37
                (Event String could not be retrieved)
             An Error Event occured.  EventID: 0x00000457
                Time Generated: 02/18/2015   15:11:38
                (Event String could not be retrieved)
             An Error Event occured.  EventID: 0x00000457
                Time Generated: 02/18/2015   15:11:38
                (Event String could not be retrieved)
             An Error Event occured.  EventID: 0x00000457
                Time Generated: 02/18/2015   15:11:38
                (Event String could not be retrieved)
             An Error Event occured.  EventID: 0x00000457
                Time Generated: 02/18/2015   15:11:38
                (Event String could not be retrieved)
             An Error Event occured.  EventID: 0x00000457
                Time Generated: 02/18/2015   15:11:38
                (Event String could not be retrieved)
             An Error Event occured.  EventID: 0x00000457
                Time Generated: 02/18/2015   15:11:38
                (Event String could not be retrieved)
             An Error Event occured.  EventID: 0x00000457
                Time Generated: 02/18/2015   15:11:39
                (Event String could not be retrieved)
             An Error Event occured.  EventID: 0x00000457
                Time Generated: 02/18/2015   15:16:07
                (Event String could not be retrieved)
             An Error Event occured.  EventID: 0x00000457
                Time Generated: 02/18/2015   15:16:08
                (Event String could not be retrieved)
             An Error Event occured.  EventID: 0x00000457
                Time Generated: 02/18/2015   15:16:08
                (Event String could not be retrieved)
             An Error Event occured.  EventID: 0x00000457
                Time Generated: 02/18/2015   15:16:09
                (Event String could not be retrieved)
             An Error Event occured.  EventID: 0x00000457
                Time Generated: 02/18/2015   15:16:09
                (Event String could not be retrieved)
             An Error Event occured.  EventID: 0x00000457
                Time Generated: 02/18/2015   15:16:09
                (Event String could not be retrieved)
             An Error Event occured.  EventID: 0x00000457
                Time Generated: 02/18/2015   15:16:10
                (Event String could not be retrieved)
             An Error Event occured.  EventID: 0x00000457
                Time Generated: 02/18/2015   15:16:10
                (Event String could not be retrieved)
             An Error Event occured.  EventID: 0x00000457
                Time Generated: 02/18/2015   15:16:10
                (Event String could not be retrieved)
             An Error Event occured.  EventID: 0x00000457
                Time Generated: 02/18/2015   15:16:10
                (Event String could not be retrieved)
             ......................... server2003server failed test systemlog
          Starting test: VerifyReferences
             Some objects relating to the DC server2003server have problems:
                [1] Problem: Missing Expected Value
                 Base Object:
                CN= server2003server,OU=Domain Controllers,DC=domainname,DC=com
                 Base Object Description: "DC Account Object"
                 Value Object Attribute Name: frsComputerReferenceBL
                 Value Object Description: "SYSVOL FRS Member Object"
                 Recommended Action: See Knowledge Base Article: Q312862
                [1] Problem: Missing Expected Value
                 Base Object:
                CN=NTDS Settings,CN= server2003server,CN=Servers,CN=domainname,CN=Sites,CN=C
    onfiguration,DC=domainname,DC=com
                 Base Object Description: "DSA Object"
                 Value Object Attribute Name: serverReferenceBL
                 Value Object Description: "SYSVOL FRS Member Object"
                 Recommended Action: See Knowledge Base Article: Q312862
             ......................... server2003server failed test VerifyReferences
       Running partition tests on : ForestDnsZones
          Starting test: CrossRefValidation
             ......................... ForestDnsZones passed test CrossRefValidation
          Starting test: CheckSDRefDom
             ......................... ForestDnsZones passed test CheckSDRefDom
       Running partition tests on : DomainDnsZones
          Starting test: CrossRefValidation
             ......................... DomainDnsZones passed test CrossRefValidation
          Starting test: CheckSDRefDom
             ......................... DomainDnsZones passed test CheckSDRefDom
       Running partition tests on : Schema
          Starting test: CrossRefValidation
             ......................... Schema passed test CrossRefValidation
          Starting test: CheckSDRefDom
             ......................... Schema passed test CheckSDRefDom
       Running partition tests on : Configuration
          Starting test: CrossRefValidation
             ......................... Configuration passed test CrossRefValidation
          Starting test: CheckSDRefDom
             ......................... Configuration passed test CheckSDRefDom
       Running partition tests on : domainname
          Starting test: CrossRefValidation
             ......................... domainname passed test CrossRefValidation
          Starting test: CheckSDRefDom
             ......................... domainname passed test CheckSDRefDom
       Running enterprise tests on : domainname.com
          Starting test: Intersite
             ......................... domainname.com passed test Intersite
          Starting test: FsmoCheck
             ......................... domainname.com passed test FsmoCheck
    C:\Documents and Settings\user>
    Now the DCDIAG for the Server 2012 R2 DC.
    2012R2DC
    PS C:\Users\user > dcdiag /fix
    Directory Server Diagnosis
    Performing initial setup:
       Trying to find home server...
       Home Server = 2012R2DC
       * Identified AD Forest.
       Done gathering initial info.
    Doing initial required tests
       Testing server: domainname\2012R2DC
          Starting test: Connectivity
             ......................... 2012R2DC
    passed test Connectivity
    Doing primary tests
       Testing server: domainname\2012R2DC
          Starting test: Advertising
             Warning: DsGetDcName returned information for \\server2003server.domainname.com, when we were trying to reach 2012R2DC.
             SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE.
             ......................... 2012R2DC
    failed test Advertising
          Starting test: FrsEvent
             There are warning or error events within the last 24 hours after the SYSVOL has been shared.  Failing SYSVOL
             replication problems may cause Group Policy problems.
             ......................... 2012R2DC
    passed test FrsEvent
          Starting test: DFSREvent
             ......................... 2012R2DC passed test DFSREvent
          Starting test: SysVolCheck
             ......................... 2012R2DC passed test SysVolCheck
          Starting test: KccEvent
             ......................... 2012R2DC passed test KccEvent
          Starting test: KnowsOfRoleHolders
             ......................... 2012R2DC passed test KnowsOfRoleHolders
          Starting test: MachineAccount
             ......................... 2012R2DC passed test MachineAccount
          Starting test: NCSecDesc
             ......................... 2012R2DC passed test NCSecDesc
          Starting test: NetLogons
             Unable to connect to the NETLOGON share! (\\2012R2DC \netlogon)
             [2012R2DC] An net use or LsaPolicy operation failed with error 67, The network name cannot be found..
             ......................... 2012R2DC failed test NetLogons
          Starting test: ObjectsReplicated
             ......................... 2012R2DC passed test ObjectsReplicated
          Starting test: Replications
             [Replications Check, 2012R2DC] DsReplicaGetInfo(PENDING_OPS, NULL) failed, error 0x2105
             "Replication access was denied."
             ......................... 2012R2DC failed test Replications
          Starting test: RidManager
             ......................... 2012R2DC passed test RidManager
          Starting test: Services
                Could not open NTDS Service on 2012R2DC, error 0x5 "Access is denied."
             ......................... 2012R2DC failed test Services
          Starting test: SystemLog
             An error event occurred.  EventID: 0x0000041E
                Time Generated: 02/18/2015   14:39:32
                Event String:
                The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could
    be caused by a name resolution failure. Verify your Domain Name System (DNS) is configured and working correctly.
             An error event occurred.  EventID: 0x0000041E
                Time Generated: 02/18/2015   14:44:34
                Event String:
                The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could
    be caused by a name resolution failure. Verify your Domain Name System (DNS) is configured and working correctly.
             An error event occurred.  EventID: 0x40000004
                Time Generated: 02/18/2015   14:47:09
                Event String:
                The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server cr-dc3$. The target name used was C
    RDC02$. This indicates that the target server failed to decrypt the ticket provided by the client. This can occur when t
    he target server principal name (SPN) is registered on an account other than the account the target service is using. En
    sure that the target SPN is only registered on the account used by the server. This error can also happen if the target
    service account password is different than what is configured on the Kerberos Key Distribution Center for that target se
    rvice. Ensure that the service on the server and the KDC are both configured to use the same password. If the server nam
    e is not fully qualified, and the target domain (domainname.COM) is different from the client domain (domainname.COM),
     check if there are identically named server accounts in these two domains, or use the fully-qualified name to identify
    the server.
             ......................... 2012R2DC failed test SystemLog
          Starting test: VerifyReferences
             ......................... 2012R2DC passed test VerifyReferences
       Running partition tests on : ForestDnsZones
          Starting test: CheckSDRefDom
             ......................... ForestDnsZones passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... ForestDnsZones passed test CrossRefValidation
       Running partition tests on : DomainDnsZones
          Starting test: CheckSDRefDom
             ......................... DomainDnsZones passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... DomainDnsZones passed test CrossRefValidation
       Running partition tests on : Schema
          Starting test: CheckSDRefDom
             ......................... Schema passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... Schema passed test CrossRefValidation
       Running partition tests on : Configuration
          Starting test: CheckSDRefDom
             ......................... Configuration passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... Configuration passed test CrossRefValidation
       Running partition tests on : domainname
          Starting test: CheckSDRefDom
             ......................... domainname passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... domainname passed test CrossRefValidation
       Running enterprise tests on : domainname.com
          Starting test: LocatorCheck
             ......................... domainname.com passed test LocatorCheck
          Starting test: Intersite
             ......................... domainname.com passed test Intersite
    PS C:\Users\user>
    From here I can see SYSVOL and NETLOGON are not replicating from server2003server. When I log on to server2003server and run ‘net share’ the SYSVOL and NETLOGON shares are shared. But, when I do the same on 2012R2DC there are no NETLOGON or SYSVOL shares.
    I see ntfrs issues. So I ran ntfrsutl ds on server2003server and the results are here:
    C:\Documents and Settings\user>ntfrsutl ds
    NTFRS CONFIGURATION IN THE DS
    SUBSTITUTE DCINFO FOR DC
       FRS  DomainControllerName: (null)
       Computer Name            : SERVER2003SERVER
       Computer DNS Name        : SERVER2003SERVER.domainname.com
    BINDING TO THE DS:
       ldap_connect     : SERVER2003SERVER.domainname.com
       DsBind     : SERVER2003SERVER.domainname.com
    NAMING CONTEXTS:
       SitesDn    : CN=Sites,cn=configuration,dc= domainname,dc=com
       ServicesDn : CN=Services,cn=configuration,dc= domainname,dc=com
       DefaultNcDn: DC= domainname,DC=com
       ComputersDn: CN=Computers,DC= domainname,DC=com
       DomainCtlDn: OU=Domain Controllers,DC= domainname,DC=com
       Fqdn       : CN= SERVER2003SERVER,OU=Domain Controllers,DC= domainname,DC=com
       Searching  : Fqdn
    COMPUTER: SERVER2003SERVER
       DN   : cn= SERVER2003SERVER,ou=domain controllers,dc= domainname,dc=com
       Guid : d3cfdf56-a013-40ab-a2e9ffc3d88896bd
       UAC  : 0x00082000
       Server BL : CN= SERVER2003SERVER,CN=Servers,CN=domainname,CN=Sites,CN=Configuration,D
    C= SERVER2003SERVER,DC=com
       Settings  : cn=ntds settings,cn= SERVER2003SERVER,cn=servers,cn= domainname,cn=sites,c
    n=configuration,dc= domainname,dc=com
       DNS Name  : SERVER2003SERVER. domainname.com
       WhenCreated  : 5/29/2007 10:36:30 Eastern Standard Time Eastern Daylight Time
     [300]
       WhenChanged  : 2/17/2015 11:21:58 Eastern Standard Time Eastern Daylight Time
     [300]
       SUBSCRIPTION: NTFRS SUBSCRIPTIONS
          DN   : cn=ntfrs subscriptions,cn= SERVER2003SERVER,ou=domain controllers,dc= domainname,dc=com
          Guid : 5d0ca299-209d-4814-ae6d7acd9209e10a
          Working       : c:\windows\ntfrs
          Actual Working: c:\windows\ntfrs
          WhenCreated  : 5/29/2007 10:50:26 Eastern Standard Time Eastern Daylight T
    ime [300]
          WhenChanged  : 5/29/2007 10:50:26 Eastern Standard Time Eastern Daylight T
    ime [300]
          SUBSCRIBER: DOMAIN SYSTEM VOLUME (SYSVOL SHARE)
             DN   : cn=domain system volume (sysvol share),cn=ntfrs subscriptions,cn
    = SERVER2003SERVER,ou=domain controllers,dc= domainname,dc=com
             Guid : fb56d707-3c40-429f-bd7c63d227b9fb5d
             Member Ref: (null)
             Root      : c:\windows\sysvol\domain
             Stage     : c:\windows\sysvol\staging\domain
             WhenCreated  : 5/29/2007 10:50:26 Eastern Standard Time Eastern Dayligh
    t Time [300]
             WhenChanged  : 5/29/2007 10:50:26 Eastern Standard Time Eastern Dayligh
    t Time [300]
       SERVER2003SERVER IS NOT A MEMBER OF ANY SET!
    C:\Documents and Settings\user>
    Also worth noting that when we power down SERVER2003SERVER no computer can contact a logon server. 
    The last line of this worries me as well. I am going to continue to work on this but I wanted to get these logs to some other eyes in case you have some ideas off the bat. Thanks in advance!

    I would first recommend to make sure that the new DCs are also global catalogs and to refer to IP setting recommendations I shared here: http://www.ahmedmalek.com/web/fr/home.asp
    It is possible to do a non-authoritative restore of SYSVOL to make it appear on the other DCs: https://support.microsoft.com/kb/290762?wa=wsignin1.0
    However, you would need to upgrade to DFSR.
    This posting is provided AS IS with no warranties or guarantees , and confers no rights.
    Ahmed MALEK
    My Website Link
    My Linkedin Profile
    My MVP Profile

  • CRM 7.0 Contact person in order not replicated to R/3

    Hello all,
    I am currently facing issue with contact persons in CRM orders. There are several partners in the CRM order. Standard ones like ship-to party is replicated to R/3; employee roles are also replicated into R/3 within an order; contact persons (no matter if standard or Z) are not replicated from CRM order to R/3. There is neither no error message in BDOC nor in order.
    Partners are set correctly for mapping between R/3 and CRM (including Z partners) -
    tables CRMPARNR (R/3) and table CRMM_BUT_CONTNO (CRM) checked; GUIDs are there
    Users do change these contact persons manually sometimes.
    If order changed in ERP - including contact persons adding/changing - all partner roles are transfered to CRM for an order correctly.
    Any ideas??
    Thanks for your help
    Radim

    Hello,
    there is an important GUID that need to be determine, the contact persons in my case need to selected via partner determination otherwise the partner gets deleted in R/3. The determination is creating the relation to the partner which is transfered to R/3 and can be checked in the BDoc. This has solved the issue

  • Hyper-V Live Migration Compatibility with Hyper-V Replica/Hyper-V Recovery Manager

    Hi,
    Is Hyper-V Live Migration compatible with Hyper-V Replica/Hyper-V Recovery
    Manager?
    I have 2 Hyper-V clusters in my datacenter - both using CSVs on Fibre Channel arrays. These clusters where created and are managed using the same "System Center 2012 R2 VMM" installation. My goal it to eventually move one of these clusters to a remote
    DR site. Both sites are connected/will be connected to each other through dark fibre.
    I manually configured Hyper-V Replica in the Fail Over Cluster Manager on both clusters and started replicating some VMs using Hyper-V
    Replica.
    Now every time I attempt to use SCVMM to do a Live Migration of a VM that is protected using Hyper-V Replica to
    another host within the same cluster,
    the Migration VM Wizard gives me the following "Rating Explanation" error:
    "The virtual machine virtual machine name which
    requires Hyper-V Recovery Manager protection is going to be moved using the type "Live". This could break the recovery protection status of the virtual machine.
    When I ignore the error and do the Live Migration anyway, the Live migration completes successfully with the info above. There doesn't seem to be any impact on the VM or it's replication.
    When a Host Shuts-down or is put into maintenance, the VM Migrates successfully, again, with no noticeable impact on users or replication.
    When I stop replication of the VM, the error goes away.
    Initially, I thought this error was because I attempted to manually configure
    the replication between both clusters using Hyper-V Replica in Failover Cluster Manager (instead of using Hyper-V Recovery Manager).
    However, even after configuring and using Hyper-V Recovery Manager, I still get the same error. This error does not seem to have any impact on the high-availability of
    my VM or on Replication of this VM. Live migrations still occur successfully and replication seems to carry on without any issues.
    However, it now has me concern that Live Migration may one day occur and break replication of my VMs between both clusters.
    I have searched, and searched and searched, and I cannot find any mention in official or un-official Microsoft channels, on the compatibility of these two features. 
    I know vMware vSphere replication and vMotion are compatible with each otherhttp://pubs.vmware.com/vsphere-55/index.jsp?topic=%2Fcom.vmware.vsphere.replication_admin.doc%2FGUID-8006BF58-6FA8-4F02-AFB9-A6AC5CD73021.html.
    Please confirm to me: Are Hyper-V Live Migration and Hyper-V Replica compatible
    with each other?
    If they are, any link to further documentation on configuring these services so that they work in a fully supported manner will be highly appreciated.
    D

    This can be considered as a minor GUI bug. 
    Let me explain. Live Migration and Hyper-V Replica is supported on both Windows Server 2012 and 2012 R2 Hyper-V.
    This is because we have the Hyper-V Replica Broker Role (in a cluster) that is able to detect, receive and keep track of the VMs and the synchronizations. The configuration related to VMs enabled with replications follows the VMs itself. 
    If you try to live migrate a VM within Failover Cluster Manager, you will not get any message at all. But VMM will (as you can see), give you an
    error but it should rather be an informative message instead.
    Intelligent placement (in VMM) is responsible for putting everything in your environment together to give you tips about where the VM best possible can run, and that is why we are seeing this message here.
    I have personally reported this as a bug. I will check on this one and get back to this thread.
    Update: just spoke to one of the PMs of HRM and they can confirm that live migration is supported - and should work in this context.
    Please see this thread as well: http://social.msdn.microsoft.com/Forums/windowsazure/en-US/29163570-22a6-4da4-b309-21878aeb8ff8/hyperv-live-migration-compatibility-with-hyperv-replicahyperv-recovery-manager?forum=hypervrecovmgr
    -kn
    Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com )

  • SRM 7.0 PO not replicated to Backend ECC 6.0 Ehp 4

    Hi SRM Gurus,
    SRM 7.0  SP 8 - ECC 6.04 SAPKH60406 ECS
    RFx Response to PO -
    SRM Local PO is created and is in held status.  Purchaser gives the source of supply and Acc Assignment and order it.
    PO now is in Ordered status.
    Issue: this PO is not replicated to Backend ECC 6.04.
    Did the Debugging as follows:
    1.  BP at B46B_DPO_TRANSFER.
    2.  Got the PO GUID from the BBP_PD transaction.
    3.  FM BBP_PD_PO_TRANSFER_EXEC, execute it and it  stopped in the breakpoint.
    4.  On 'FUNCTION 'BBP_PO_INBOUND' DESTINATION lv_destination',  hit F6.
    5. Checked  lt_bapi_return details.
    Here there should be information regarding some error during the PO copy to backend.
    With this error message you can check why the PO was not created in backend.
    ERRORS from Backend are as follows:
    1.   No instance of object type PurchaseOrder has been created. External reference:   E  BAPI 001
    2.   Document contains no items       E    ID 06   Number 010
    3.   Please enter items first.              W   ID 05                 005
    No XML messages in SXMB_moni both in SRM side and ECC side.
    What am i doing wrong here?  Any help is highly appreciated.
    with regards,
    Freemind

    RZ20 errors:
    Local Errors:   Business to Business Procurement(600)
    Error reading export data for EXEC transfer of purchase order
    Error in local purchase order; no update of references in EXEC system
    Backend Errors:
    PO 3000000051: No instance of object type PurchaseOrder has been created. External reference:
    Purchase order 3000000051: Document contains no items
    Purchase order 3000000051: Transfer Failed; Resubmit
    Since we are in SRM 7.0 ECC 6.04 Ehp 4,  with PI 7.11 + ROS and no SUS.
    doent the system uses ESOA Service for PO replication.
    We did CCTR / CPPR scenarios too. Both are sucessful.
    Do we need to impl BADI PUR_SE_PO_INTERFACE_OUT_SELECT
    But thats for Service hierarchy and Service POs -  We dont have Service hierarchy or SUS in our SLD.
    IF PO replication also uses PI, what configuration do i need to do?

  • SRM 7.0 Contract not replicating to backend system

    Hi,
    We have created CCTR global outline agreement in SRM 7.0 extended classic scenario. the contract is not replicating into backend. we have maintained necessary message types BLAORD, COND_A in ECC system as inbound parameters for partner type as SRM system.
    when i looked rz20, i am seeing the message as "back end data could not be read"
    When I executed function module B46B_CTR_TRANSFER I am getting an error, RFC destination could not be found.
    please let me know what we are missing.
    thanks
    vem

    "Hi,
    I guess your SRM70 connected to backend ECC with EHP4 pack applied. If so, Central contract will not use IDocs instead it works on new eSOA technology where Xi/PI need to be set up to process service calls.
    If you are not using EHp 4 pack on your ECC, then SRM70 use IDocs to distribute contracts to backend.
    Thanks,
    Jagadish
    Hi jagdish,
    we are on SRM 7.0 and ENHPack 4.0 and as you said its picking up the eSOA route to distribute contracts in backend ECC system.
    I would like to know how can we  this programmatically ( BADI / Enhancement points)  and force system to pick the ALE/IDOC route ???
    Do you know any BADI / Enhancement points where we can implement this ???

Maybe you are looking for

  • Serial Number Use

    Dear Experts, This is regarding the captioned subject. It has been observed that serial numbers created by the Manufacturing Units for the Production Purpose are being consumed by the Marketing Plants for Making GR at their end. Logically in Our Scen

  • Scanner and Mac Pro help, please!

    I can't get my HP officejet 6500 Scanner to work with my Mac Pro

  • Transient Column in an Extended VO not refreshed.

    Hi Please can somebody point me in the right direction re: refreshing transient attribute. I have the following scenario :- I needed to add the Item Code for Internal (Inventory) Requisitions in some of the I-Procurement pages e.g. Shopping Cart. I h

  • I cannot open my Adobe Bridge.

    I cannot open my Adobe Bridge. It keeps saying check with the developer and see if Bridge is compatible with my MAC OSX version. How do I solve this problem? It is literally impossible to actually speak with a human person about this issue so I am as

  • Sample xml db

    I need to evaluate hundreds of xml logs (statistics, queries, reports). May I please have a sample? If possible a php app? Thank You.