PO with Zero Dollar

Hi Friends,
I know that we can create a PO with Zero $ where the "Condition" tab will disappear.
But, our requirement is some thing that we need to create a PO
Example : - PO for 10 $
Discount for 10 $ (Standard price discount)
So, net to be Zero $ and also need to print on PO output.
Is it possible???
Appreciate your greatest inputs.
Thanks,
Vamsi.

Thank you for your reply,
I realized that also. But, our requirement is that user want to show on PO price as 10 $ and Discount as 10$ and net as 0 $ !!!!.
Any more brains please!!
Thanks,
Vamsi

Similar Messages

Can we post zero dollar invoice (AP)

Hi
I have come across a weired situation. We need to clear the GRIR balance and to clear the quantity, we want to process the dummy invoice with zero dollar.Is it possible ? My system does not allow that.
Thanks in advance

Hi,
No it is not possible to post a zero value document.
Thanks
Murali.

Zero dollar invoice in AP

Hi
We have come up with a situation in which the invoice value will be zero dollar.The reason for this trick is we want to clear some GR balance (quantity) .Can some one tell me how to do that ? I understand some minimum dollar amount setting in fbzp. Let me add it , as per some other thread on forum , 4.7 onwards zero dollar invoice is allowed .
Thanks
Satya

Hi,
    I know of no way to post a nil value document in FI.
What is possible in Miro is such a posting:-
    Vendor         Nil            (No posting line is generated)
     GR/IR     Dr   xx
     G/L Acc Cr   xx
For this G/L Postings has to be activated for Miro.
Kind regards

Zero Dollar orders- Credit Management

We have requirement in regards to "Zero" dollar orders.
End user is requesting that all orders with net value of "Zero" do not hit VKM1- Block Order screen
via Credit Management.
How to do this ? Is this stnadard config ? Or do we need development ?

Hello
If it different sales document type, go to customisation sales document type - in the field 'check credit limit - remove D.
Also in the item category customisation , remove credit active tick.
thank you
Anirudh

INVOIC01 fails that contain zero dollar items

Hi Experts,
We are trying to implement electronic invoices by cXML transmission with an XI interface. During testing it was found that any invoice which contains a zero dollar item will fail at the IDOC with an error, 'Item not selectable'. This occurs due to the fact that when the zero dollar line item is sourced by the buyer agent, they must deselect the 'Invoice Expected' check box under the purchase order line item follow on documents. This is the only way to source a zero dollar line item. Is there a way to adjust something so that the IDOC will not fail for zero dollar line items?
I also posted a similar question on the SRM forum to see if there is a way for us to source zero dollar items and still keep the Invoice Expected checkbox checked. I just didn't know if there might be an option here on the R/3 side to address the problem as well.
We are on SRM 2005 SP12 and on ERP 6.0 SP13.
Any guidance is appreciated!!
Cindy

Hi,
You can try following solutions.
1. Try making the error message as warning and order the PO. See if ECC accepts the PO.
2. Use BBP_ECS_OUT_PO badi to pass the invoice indicator in ECC PO.
Regards,
Sanjeev

How do I remove a credit/debit card from my account? I ask because I currently have a VISA gift/debit card with 50 dollars on it, but the money has run out so I want to usea new card. Also, there is no 'None' check option for payment type on my account.

How do I remove a credit/debit card from my account? I ask because I currently have a VISA gift/debit card with 50 dollars on it, but the money has run out so I want to usea new card. Also, there is no 'None' check option for payment type on my account.

Depending on how you created your account, "None" may or may not be an option. I believe it has something to do with whether the account was made through an App Store request or the regular iTunes Store. For example, my account allows no card but my father's doesn't allow there to be no card.
To change the card, go to your account settings and change the information to your new card, and hit save.

Items with zero stock quantity show negative stock value in Stock reports

When running Stock reports for controlling the stock value towards the GL accounts, some items appear with zero stock quantity, but the report still shows a stock value (negative value in my case)
How can this happen, and how can I correct this situation ?
System parameters are : negative stock is not allowed, Items with zero cost price not allowed. On item level average cost price method is used.
P.K.Johnsen

Hi Johnsen,
I believe you have checked the" Manage Inventory by warehouse". I have noticed this issue in SAP B1 2005B but this is rectified in 2007B. The system behaves in this way as the system maintains item cost for the item for all warehouses and even if the stock is not present in the warehouse, the system would still show you a value for the same. Hope this helps. please search the forum. You'll find related threads.
Thanks,
Joseph

Dunning letters printing with zero balance and no invoice listing

How to trouble shoot 'Dunning letters printing with zero balance and no invoice listing' problem

As per my understanding it could be due to OB22 settings.
refer following SAP notes
335608,191927,
373296

Excise invoice posted with Zero duty value

Hi,
My client has an STO process where they will generate a proforma Invoice with Excise duties,
Initially when proforma was created excise duties were not reflecting since condition records were not maintained, user was not aware of that and created a excise invoice also with 0 Duty value.
After this condition records were maintained and invoice was updated with excise values. But we are unable to update the excise tables through the same excise invoice no. This transaction is a back dated one for which client has already filed excise returns with SAP Excise number series, Can we pass a JV through FI to adjust the entries or any other solution.
Regards,
Zehran.

Client has done PGI with ZERO quantity
also done billing
if i go to cancel that cancel invoice in J1IIN
it is not allowing to cancel
If your copy control is in line with standard settings, first of all you cannot post the goods issue without any quantity and also generation of billing is not possible.
Coming to your second issue, please try in J1IH instead of J1IIN.
thanks
G. Lakshmipathi

Excise invoice done with ZERO, not able to cancel.

Hi Everybody,
Client has done PGI with ZERO quantity also done billing & even done Excise invoice with Zero Quantity & Zero value. Now if i go to cancel that cancel invoice in J1IIN it is not allowing to cancel & not even displaying.
That Invoice does not carries any value but even then client wants to cancel that exc inv number.
How to cancel the Excise Invoice?
Regards,
Vijay

Client has done PGI with ZERO quantity
also done billing
if i go to cancel that cancel invoice in J1IIN
it is not allowing to cancel
If your copy control is in line with standard settings, first of all you cannot post the goods issue without any quantity and also generation of billing is not possible.
Coming to your second issue, please try in J1IH instead of J1IIN.
thanks
G. Lakshmipathi

Please i went back a refund i use my account without a credit card than i purchase a app with 200 dollars and it was purchased an d my account do nest have a credit card

please i went back a refund i use my account without a credit card than i purchase a app with 200 dollars and it was purchased and my account does not have a credit card and the money was taken from the credit card

Contact iTunes:
Apple - Support - iTunes - Contact Us

How do I sync my old iPhone 5 to a new laptop PC without losing any iPhone data? The "remove and sync?" option looks like it will leave me with zero data on the iPhone!

how do I sync my iPhone 5 to a new Toshiba laptop PC without losing any iPhone data? The "remove and sync?" option looks like it will leave me with zero data on the iPhone!

See Recover your iTunes library from your iPod or iOS device.
tt2

How to fill a sparse table with zero

Hi All
I have a sparse table, most of the cells is null, but and few of the cells is "1"
I would like to fill the null with zero.
This table is from pivoting a transactional table into a table that will describe the attributes and later on for data mining
I am thinking of
1) do a user_tab_columns and copy and paste make a script that use NVL
for e.g.
select 'NVL('||column_name||',0,'||column_name||'),' from user_tab_columns
where lower(table_name) = 'claims_t1'
but I run into an issue
e.g.
create or replace view claims_t2x
as
select
NVL('Diagnostic Imaging'_SPEC_SUM,0,'Diagnostic Imaging'_SPEC_SUM) 'Diagnostic Imaging'_SPEC_SUM
from
claims_t1
I keep getting error of ORA-00911: invalid character
as the column name got "'" in it.
or
2)Use PL/SQL
I just do a select and loop through the whole thing
For 2), I am not sure how I can get all the column attribute.
As the attribute in the transaction table is not fix so the number of column after pivoting is not fix
any idea?
-Thanks so much for your input.
Edited by: xwo0owx on Apr 27, 2011 11:08 AM

>
pivoting A transactional TABLE INTO A TABLE that will describe THE ATTRIBUTES AND later ON FOR DATA mining
>
You should have created all the columns with DEFAULT 0 NOT NULL;
Why doing all this every time. Why not generate the table itself like that?
what do you mean by a fill? you want to update them?
then loop through and update like this,
DECLARE
   p_tab_name   VARCHAR2 (100) := 'your_table_name';
   l_sql        VARCHAR2 (1000);
BEGIN
   FOR i IN (SELECT *
               FROM user_tab_columns
              WHERE table_name = p_tab_name
                AND datatype IN ('VARCHAR2', 'NUMBER', 'CHAR'))
   LOOP
      l_sql :=
            'update '
         || p_tab_name
         || ' set '
         || i.column_name
         || '=0 where '
         || i.column_name
         || ' is null';
      EXECUTE IMMEDIATE l_sql;
   END LOOP;
END;G.

Assign hexadecimal value to an Integer variable preceding with zero

hi
i need to pass an hexadecimal value, preceding with zero (0).
like 0775
the above hexadecimal value should be assigned to an integer variable. While i am trying to assign it, the output could be truncate the preceding zero value. Is it possible to do my requirement without truncating the preceding zero.?
Edited by: sasi on Jul 23, 2012 7:09 PM

I agree on that, this can not be carried out the way you explained.
Either you store the hexadecimal value as a string, and convert it before arithmetic operations:
int number = Integer.parseInt("0775", 16);
Or you store it as an integer (no leading zero) and convert it to string as you display it:
int number = 0x0775;
System.out.printf("%1$04x", number);

Stock transfer with zero stock

Hi all,
Stock tranfer is happening with zero stock.
Is there any way to avoid this ?
Thanks
Jeyakanthan

Hi Jeyakanthan,
If you have already selected 'Block below negative quantity', please check Item Master Data ->Stock Tab: checkbox for
'Manage Stock by Warehouse' is ticked or not.
With it ticked, the system considers the stock in each warehouse and none of the warehouses can go into negative stock for this item.
If this box is not ticked, the system calculates the overall stock availability and e.g. if you do a stock transfer for an item from warehouse A to warehouse B, you will never go into negative stock in an overall view for this particular item although it is negative in warehouse A.
To sum up, you need to check the box "Manage Inventory by Warehouse" in the "Item Master Data" and at the same time "Block below negative quantity" checkbox in the Document Settings in order to block negative quantity by warehouse.
I hope this answers your question.
Regards,
Ivy Zhang
SAP Business One Forums Team

PO with Zero Dollar

Similar Messages

Maybe you are looking for